Surround Sound Option Grayed Out With HD4870 And HDMI Connection
Feb 26, 2009
I just built an HTPC wiith Vista64 SP1 and am having a problem. I have a DFI LanParty X58-T3H6 motherboard and a VisionTek Radeon HD 4870 Video card with HD audio. I have an HDMI cable going to my Sony AV receiver and all I get is Stereo Audio. The subwoofer never comes out of standby nor does the AV receiver indicate anything but a stereo input.
I have the RealTek HDMI audio device installed and it says it is working properly under Device Manager. Under properties all that is offered is Stereo speakers. Surround Sound is shown as an option but it is grayed out and not selectable. All drivers are up to date as of two days ago, and I have the on-board sound of the motherboard disabled in its BIOS.
Other HDMI devices, such as my XBOX 360, do surround sound through the Sony AV receiver. VisionTek support told me to install the HDMI RealTek driver, but that's all the help they've been able to give me.
View 8 Replies
ADVERTISEMENT
Sep 14, 2008
i purchased a creative inspire t6100 this summer and i got it to work with my vista home prem x64 for a while, then this past week it just broke on me, what i mean is that i only get stereo quality sound (2 front speakers and center when voice chat is on.) my motherboard is the asus p5q-pro and i am using the onboard sound card which is the realtek hd audio soundcard on 6.0.1.5591 driver version.
now i went into the settings already and configured my speaker system to 5.1 surround sound (thats what i did when i bought my system first and it worked fine.) now it wont work. when i press test however, all my speakers work, so it cant be a connectivity problem. it is just when i use itunes to play music or when i play games, or Internet or whatever, i only hear the 2 front speakers, my sub and rear 2 just dont work, only gives out staticy sounds when u listen to them.
View 7 Replies
View Related
Mar 11, 2009
I have a new system with a Gigabyte GA-EP45-UD3P Pro DDR2 Crossfire Motherboard with onbord 5.1 sound. My issue is my surround sound will not work with media player or media centre. Only the rear speakers will work. The surround sound works in games perfectly. The speakers are 5.1 Altec Lansing. Does anyone know how to fix this? I have played with the settings in media player with no avail. I GOTTA HAVE MY SOUND.
View 4 Replies
View Related
May 19, 2009
I've read as much posts as I could before my eyes started to cross. I have a Vista Home Premium, 32 bit. I have a Realtek HD sound card. I've tried everything I could think of. I went into the sound properties, keep tryin to configure it to play a 5.1 sound system ( i recently got a hold of a Altec Lansing ADA995) and it shows the option to set it to a 5.1 surround sound but for some reason vista wont let me select that option?
View 4 Replies
View Related
Mar 23, 2008
When I play music using Window Media Player/Centre the sound doesn't come through my surround speakers - only the front 2 work. when I test the speakers they work fine
View 4 Replies
View Related
Mar 3, 2010
One of the small networks I manage had a Win2k DC that crashed. We replaced it with a 2008 SBS & since most of the clients were XP, I was able to join computers to the new domain & copy the profiles from the old location to the new location. That was until I got to the Vista laptop. On this computer, the profile shows as 'Unknown' & the 'copy to' option is grayed out.
I am currently copying the contents of the C:Usersusername folder to the C:Usersuser.newdomain folder. Will this be all I need? Is there an easier way? Also, under system properties>user profiles that Unknown profile shows to be 42.9 GB, but the folder I am copying is only 19.7 GB. Why such a huge difference?
View 7 Replies
View Related
Apr 12, 2009
why is ccc only showing these options im using hdmi cable and need to use the {overscan i think its called} because ive got big gaps around my screen the native resoloution is 1024 * 768 or, is there any freeware software which i could zoom my screen in a bit (i posted this on ati forum but its been a day and not 1 view so im posting it here}
View 4 Replies
View Related
Apr 14, 2009
Don't know how this happened but I deleted a coulple of files from my Documents Folder (Documents, Music, Pictures, Recently changed, etc.), and the whole Folder ended up in the Recycle Bin. I now have an exact duplication of my whole folder in the Recycle Bin. If I delete a file from the copy in the Bin, it deletes it from the Folder on my desktop. The "Empty recycle Bin" option is grayed out. How do I get rid of this duplication? It's taking up about 3 GB of my hard drive so obviously I have somehow copied all my files to the recycle bin.
View 8 Replies
View Related
Jan 28, 2010
Well after I had made another adminstrator account which I dident mean to I had logged in to my account I always use and had no sound,no Internet connection, my whole start menu bar looked like I was in xp which I'm not. So I wanted to know if restore will I still have this problem. I have 2 restore disk they gave me when I bought my computer.
View 9 Replies
View Related
May 15, 2010
What do I do if my log on is incorrect and grayed out and I am unable to change it back to Local Service from Network Service?
View 5 Replies
View Related
Mar 23, 2008
Private network. In network and sharing center I have network discovery, file sharing, print sharing, public sharing and printer sharing all turned on. When I try to share a disk the sharing option is grayed out same with the printer. What am I overlooking?
View 4 Replies
View Related
Mar 23, 2008
I just noticed that everything under the HP printer's properties is grayed out and so I cannot change anything. I thought ownership/privileges could be the cause of my not being able to print from this test VISTA machine over my LAN to the HP AIO printer which is connected directly via USB on my XP machine. But I can't change anything - I notice other things (e.g. share name) are grayed out also preventing change. At the very least I want to be able to regain control of all this. Remember - I can print in reverse over my LAN (using another printer). That is, from my XP machine to the EPSON printer connected to this test VISTA machine. I seem to be able to access and change files/folders at will from each machine to the other - so I feel I must have my LAN set up at least nearly correctly. Yes, I have turned User Account Control off.
View 4 Replies
View Related
Mar 23, 2008
When writing an email, clicking on insert drops down various choices, but Signature & Business card are grayed out. Does anyone know how to use this feature? It was easy to set up in Outlook Express.
View 5 Replies
View Related
Feb 19, 2009
At random points, my Volume and Network icons disappear from the Notification Area and when I try to restore them from the Properties menu, they're grayed out. The policy registry entries in both HKLM and HKCU don't exist. A simple log out/log in typically restores them, but is usually too much of a nuisance to bother doing.
View 4 Replies
View Related
Apr 22, 2008
MS Vista Home Premium I am trying to use MS paint and the 'A' tool on the tool bar is grayed out and not clickable. Do I have to pay to use this tool? Also if I go to view the 'Text Toolbar' option is checked but again it is grayed out. I am no expert on windows but I thought paint was included with the OS. PS Don't bother telling me that some other program is better, I just need to plan my flower garden and MS paint is fine for that.
View 4 Replies
View Related
May 10, 2009
I know this is a Vista forum, but I do not see any Windows 7 forums. This has carried through a number of recent builds of Win7 and now is in the RC, 7100 build. Not sure if this is a change in functionality or a bug. If you want to copy the profile of a local user, you can login to the PC (Vista and earlier) as the local Administrator, go to System Properties > User Profiles, choose a user's profile, then click the Copy To button to copy that profile to another profile. In Win7, the Copy To button is grayed out when you choose another user's profile. All you can choose from is Change Type or Delete.
View 5 Replies
View Related
Jan 28, 2010
i just bought LOGITECH x-530 5.1 Speaker system. when i go to "Realtek HD Audio manager" and choose "5.1 speaker" the "rear pair" is grayed out! Here is a picture; if i change it to 7.1. then the "rear pair" will appear and i will be able to preform the test and hear sound... B-U-T ---> when i will play movies.. (divx, mkx, bluray.. ect'...) i don't hear the people talking.. it's like the wrong sound configuration information goes to the speakers. it will seem the people talking coms from the sub-woofer.. and again really really dim... .+ the rear speakers will work but very low (even when i put it on full volume) . any idea how to set up correctly the sound ? so even if i am on 7.1. the sound will go to the speakers as 5.1 and send the right information to each speaker?
View 5 Replies
View Related
Oct 28, 2007
Specs:
Monster Ultra 800 HDMI Cable
Viewsonic 2835M (1920x1200 max resolution)
Nvidia 8400M GT 256MB Dedicated / 1GB shared
Sony Vaio Laptop VGN-FZ290
Vista Ultimate x64
Nvidia driver (laptopvideo2go.com): 7.15.11.6369
Problem:
When using HDMI connection instead of VGA, the font quality is blurred and distorted. I tried at least 4 different brand new hdmi cables and know for sure it is not the cable NOR the laptop NOR the monitor itself. It is a setting somewhere along the line. I've tried this on 2 laptops, 2 monitors (same brand/model), all same issue.
I set resolution to 1900x1200 and tried 1900x1080 (both 32bit). No normal quality at all. VGA is fine, but I prefer hdmi for higher quality - at least once I get it fixed. I tried 59hz and 60hz,
View 9 Replies
View Related
Feb 1, 2009
I used to connect my HP Pavilion dv9260nr Notebook to my Sharp Aquos LCD tv through an HDMI cable and got audio and video w/ no problems. About 2 months ago I reinstalled Vista Ultimate x64. I haven't tried to reconnect until recently and now I get video but no audio.
I have tried to set SPDIF Interface to default like I used to but it doesn't work. You can see the green "mixer" bar moving, but I can't hear anything. Also, when it's set to default the configure box is greyed out.
I have the latest Conexant High Definition Audio Driver, 4.33.1.61.
I also have Vista Codec pack v511 installed.
Seems like I need to "enable" hdmi somewhere but I can't find anywhere to.
View 9 Replies
View Related
Dec 13, 2008
I am researching this for my wifes laptop and I am posting/doing this currently from a work computer that is on a very slow network thus using search is very painful at work (otherwise I might not be asking this question).
Connected pc to lcd via hdmi - no problems. picture - good, no issues as of yet audio going through the tv - sound from all sources except dvd's - digital output/sound is enabled. The DVD sound does play through the laptop speakers while watching the movie. used various DVD playback software all = no sound from tv
View 5 Replies
View Related
Jan 10, 2008
I got a Sharp TV, 32" LC32GP3U-B (1080p full). I connected an hdmi cable from my laptop (also 1080p full) to the TV. My laptop screen dropped to Vista Basic theme in 16bit color mode and I can bring it back up to 32bit. Why is that? Inside my Nvidia control panel I was unable to change color depth. I cannot view on the TV display if I use single or clone mode. Everytime I try to set it to single or clone mode, it reverts to laptop display instead. Why?
A strange problem, when configuring Media Center, I chose TV as output. Now the color, contrast, gamma, etc is perfect on the TV itself and Media Center interface. However, when viewing the test videos to adjust the settings, the video is nearly black, dim, yet the interface to Media Center is perfect, so is viewing regular TV mode (w/o hdmi to the laptop) and even when HDMI is plugged in, quality is superb when using programs displayed on the TV. I did choose hdmi as connection type in MC, but why is the video so dim?.........
View 7 Replies
View Related
Aug 27, 2009
I just got a new LCD monitor for my PC that has a HDMI port. I have a couple of newb questions about HDMI on the PC.
1. Will the image quality be any better?
2. I mainly play games on my PC. Will using the HDMI be better or worse?
3. I have a HT Omega Claro + audio card. Will using HDMI effect this audio card?
My video card is a Sapphire 4870 card. I virtually know nothing about HDMI on PC's.
View 4 Replies
View Related
Aug 30, 2008
I just got a Dell Utrasharp 2408WFP. I'm very pleased with the monitor but have read that, as it's an S-PVA panel, input lag will adversely affect games performance.
Also read, maybe on this forum, that a DVI to HDMI adapter will greatly improve things.
I have such an adapter cable.
Can anyone confirm that it would be better than the DVI to DVI I'm currently using?
I am connecting to a BFG 8800GTS OC 512MB which has 2 DVI ports so should I use it in addition or instead of the DVI to DVI?
View 8 Replies
View Related
Aug 11, 2009
I have the computer HDMI hooked to the receiver HDMI and the receiver HDMI output hooked to the LCD HDMI input. I see Vista DESKTOP on the TV but do not have sound. When I go into the Realtek HD Audio Manager I do not see an option to Choose Digital Output device HDMI. Bios does not have an HDMI choice. I tried driver updates did not work. I have another Media Center PC. which I connected the same way the HP is connected I do get Video and Sound.
View 9 Replies
View Related
Oct 1, 2009
I just bought an Acer Aspire AX1300 with Windows Vista Home Premium 32x and an Nvidia GE 8200 video card for storing data and, more importantly, to play shows and movies through my 1080p Mitsubishi HDTV. It is connected through native HDMI and the cable is high quality and works perfectly fine with my Gateway laptop to the same TV.
The video looks great as long as the screen is static, like on the desktop or surfing most websites. But as soon as any motion or video is displayed the screen starts to frequently flicker every couple seconds, and sometimes cuts out to black completely for 3-5 seconds, until the TV picks the signal up again........
View 6 Replies
View Related
Mar 15, 2009
I have 64 bit vista ultimate, when I connect mt laptop to tv via HDMI cable and play any movie, TV screen flickers. but runs OK on laptop screen. Also if I connect my laptop to tv via s-video then this problem goes away. I do not know why....
Is there any setting to done on TV or on laptop to rum via HDMI. Please advise.
View 7 Replies
View Related
May 15, 2010
I have an HP laptop, a Pavillion dv9000. I recently got an hdmi cable to connect it to my tv. I was able to get it to work the first time, but subsequently when I've tried my mouse cursor disappears. I can still toggle icons and such using the keyboard but it's a pain. any thoughts on why this is happening or what to do to fix it?
View 7 Replies
View Related
Feb 13, 2008
Is it possible to connect a vista media center to a HD set top box receiver and then connect the media center to a tv again via HDMI. If this is possible has anyone got any suggestions / recommendations on what type of card i would need.
View 6 Replies
View Related
May 20, 2008
I do not get the full screen output on my TV when connected via HDMI. This is very frustrating. The TV itself works fine in full screen (1080p, 720p, 480p, etc). I DO get full screen output on any Linux o/s I test it with, via hdmi. However, I prefer to use Vista instead in order to use MCE and the plugins I have (Netflix, Joost, etc plus MCE remote). I duplicatedt this before and after upgrading to Vista SP1. I've duplicated this with many WHQL certified NVidia drivers as well. Literally at least 5-10 different driver versions for my 8400M GT card.
I cannot figure out why it is not showing full screen output, but I can confirm this happens in Vista only, not Linux (did not and will not test in XP). My index score in Vista is 5.0. It was actually 5.3 at one time, then dropped to 5.1 and 5.0 over few months span...........
View 5 Replies
View Related
May 29, 2008
I recently bought a HD Camcorder. I bought Pinnacle Studio Ultimate to edit my film. I am able to connect my camcorder to my laptop using USB, but the software doesn't recognize my camera. It says I need to use Firewire or 1394 port. When I hook my camera up with HDMI, the camera and computer do not recognize each other. I know the HDMI works, because I've used it for my TV. I am not sure what the Firewire port is, or if my laptop has on?I much rather use my HDMI port. Is there a way I can get my computer to
recognize devices hooked up through HDMI ? I am using Windows Vista.
View 9 Replies
View Related
Mar 6, 2010
I am using a 19" HD flat panel TV as an external monitor for my laptop (Win7). Text was crisp and clear with the RGB connection but when I switched to HDMI (to get the audio also) the text got pretty blurry (graphics are still pretty good). I've tried adjusting the resolution, the Clear Type text, and the Smaller 100% and Medium 125% settings but nothing seems to help. I've also tried various adjustments on the TV to no avail.
View 9 Replies
View Related
