SP1 Shows 8GB Memory Instead 1GB
Mar 19, 2008
Well, I did installed SP1 today. Everything (the installation) went fine! After it finished, I checked again the WU and got the update for my Realtek AC'97 which I was trying to avoid. Although, I ended up installing it because I read somewhere that it needed to be updated for the SP1. Now, this update (Realtek) doesn't fixed anything since now every time I right-click on the little speaker and select Playback/Recording Devices then I get a message with: "Windows has detected that audio enhancements for the following device are causing problems: Realtek blah, blah, blah..." Can anybody explain that?
But now, the real good one, I have only 1GB of memory but when I go into the properties of the computer, then it tells me that I have 8GB installed... Don't I wish!!! So, I thought, hmmm, maybe if I remove the 1GB and try only 512MB then Vista will recognize its mistake. Well, guess what, I got then instead 4GB available showing on the properties... Strange! Very strange, I thought to myself... Funny is that the task manager shows the correct amount of memory! Have any of you had such a situation too??? I did already an uninstall of the SP1 which came from the WU and installed the one from the download link in Microsoft website. But, as you guess, it made no difference...
View 5 Replies
ADVERTISEMENT
Feb 9, 2008
I have recently swapped my OCZ 4GB (1GBX4) DDR2 @ 800 MHZ and upgraded to OCZ 8GB Sli (2GBX4) @ 800 MHZ on my Ultimate X64 bit. Installed flawlessly, but can someone please give me a logical answer as to why on my system properties it shows only 7,678MB of memory?? I thought X64 OS shows all memory, and I know my mobo can handle up to 8GB @800MHz. Also, I have installed every single Windows update, and after the upgrade to 8GB, I can see a definite increase in performance.
View 9 Replies
View Related
Jun 4, 2008
This is with Vista SP1 installed. I added 2GB RAM making the total installed RAM size to be 4GB. My problem is that although BIOS recognize the RAM size to be 4GB and the Properties/System shows also 4GB, but both of the System Information/System Tools and Performance/Task Manager show 2GB. How can I check to see if 4GB is being made available for the system to utilize?
View 9 Replies
View Related
May 23, 2009
My buddy was bringing over some files for me on his laptop hdd running xp. I plugged it into my vista x64 computer via usb and I am having a few issues. The hdd shows up in My Computer and shows stuff in it but when I open it, it says that the folder is empty. I whent to Vistas disk manager and it shows everything is fine with the hdd but for some reason the files just wont show up.
View 6 Replies
View Related
Feb 23, 2007
Memory DiagnosticsIf Vista detects a memory problem in your system such as a faulty RAM module, it will display a notification asking if you want Vista to try to diagnose the problem.Then again you may also recieve the sudden BSOD with the error MEMORY MANAGMENT at the top. You can manually run this tool anytime just typememory in the search box inside the start menu.This tool offers you two options: restarting immediately and checking for problems, or running next time you reboot your machine (the memory diagnostic tool must run at boot time).
Network DiagnosticsWindows Vista also allows you to check the connectivity of your network connection using the Network Diagnostics Framework: An infrastructure and a set of built-in and extensible components that attempts to automatically diagnose and correct network connectivity problems. The usual way to run this check is to open Network Center and click the Diagnose Internet Connection link on the left Vista will either identify ............
View 4 Replies
View Related
Nov 29, 2009
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit, but the available memory shown in the system is still 3.3 GB. Why is this and is there a way to make the full 4GB available? It's possible that my video card is using RAM instead of its own RAM. If I install a video card with its own RAM, will the full 4GB be available?
View 9 Replies
View Related
Jul 3, 2008
I have a problem with Vista Ultimate x64 SP1, I always seem to lose all my free RAM within an hour regardless of system activity, even while idling. I have noticed an svchost.eve process runs each time I reboot which seems to bloat constantly although when I close it down it only frees up about 800MB, what's happening to the rest of my 8GB??? When I launch Task Manager it says I'm only using 10% Memory but free RAM sits at 0?!?!
View 9 Replies
View Related
May 16, 2010
I had 4GB physical memoryon the PC. With Windows vista 32 bit, available memory is shown as 3.3GB. I asked on usenet and was told that only under 64 bit windows, will the available memory be 4GB. When I upgraded to windows 7, I chosed 64 bit (I did clean install of course), but the available memory shown in the system is still 3.3 GB. This is show in both task manager under performance->Physical memory->total, and 'property of My Computer'->Installed memory (4GB/3.3 GB usable)........
View 7 Replies
View Related
Aug 23, 2008
I am fairly new to the forums, and VERY new to Vista x64. The machine is new, and I was trying out some apps and games, I was in Secondlife when I got an error messege saying I was out of memory and needed to free up memory. I shut down the app and restarted it. Runs but I watched Task manager and saw my free memory down to almost nothing after an hour or so. The cached seems very high.
I did alittle research and decided to set a second page file on my 1TB hard drive, (OS is on the other HHD's )( regulated by system for size ) I'm not really sure whats going on. Example of just task manager and this page openis attached. Again, any help would be great in getting the memory set up on here optimal.
View 9 Replies
View Related
Oct 17, 2009
I have 6gigs of DDR3 memory at 1600hz. Running on Vista 64bit and every now and again my memory performance just maxes out. The problem can occur around the time when I am installing something but I dont think its always this way. I have read forums where it could be the hardrives performing self diagnostics. I have all the latest patches for vista.
View 7 Replies
View Related
Mar 26, 2009
I'm running Vista 64 Home (SP1) Premium on a homebuilt machine w/8GB (4 X 2GB modules). Windows is reporting 8 GB of Installed Physical Memory but is reporting only 4 GB of Total Physical Memory. I first noticed this when, after installing a game, the game system specs said 3092 MB of RAM.
I have checked the BIOS and it recognizes 8 GB. Memory Remapping is Enabled. Under Memory Remapping is "PCI MMIO Allocation: 4GB to 3328 MB" (?). MSConfig Boot Options shows Max Memory is not checked and no value in the box below. I tried enabling it and using 8192 as the value, but it made no difference. DxDiag shows 8 GB installed RAM. how I can get windows to make available all 8 GB of RAM? (Motherboard is ASUS Maximus II Extreme w/Intel Q9550 processor running at Q9650 clock speed, memory running at 1127 MHz
View 9 Replies
View Related
Oct 7, 2008
I just installed Vista Ultimate 64 bit on a new pc I just built. System properties shows 64-bit Operating system. But when I go to display settings the tab where it says "color" says Highest(32 bit). What does that mean? Does one have any thing to do with the other? My PC Specs:MoBo: Asus M3A32-MVP Deluxe/WiFi-AP, a MSI RX3870-T2D512E OCgraphics card. 2gig memory And a AMD Phenom X4 9600.
View 3 Replies
View Related
Jun 3, 2008
im a bit confused a got 4gb ram on my pc but windows vista only shows it as 2gb, does this mean my computers only using 2gb ram because im doing high render animations and i need the full potentional of the 4gb.I have an xps 730?
View 8 Replies
View Related
Dec 19, 2008
I have an 8GB SanDisk Cruzer drive and when I plug it into Vista it only shows 6.43GB. Is this normal? If so where is the other 1.5GB'ish of space gone?
View 6 Replies
View Related
Apr 14, 2008
I have a Lenovo X61 machine with Windows Vista. I have 3 GB RAM...1GB+2GB in the 2 memory slots. I got a new 2GB RAM and pulled upgraded the machine to 4GB by pulling out the 1GB. After the installation, the BIOS shows 4GB RAM, but Windows shows only 3GB. In computer properties, it shows 3062MB. In system information, it shows
Total Physical Memory - 3061.50 MB
Available Physical Memory - 1.32 GB
Total Virtual Memory - 6.16 GB
Available Virtual Memory - 4.36 GB
Page File Space - 3.28 GB
Why is it not detecting the 4GB Memory though it shows up in BIOS. Do I need to upgrade anything or change any settings?
View 4 Replies
View Related
Mar 4, 2009
Ive had 8 GB in my machine for over a year, all is fine, runs no probs. But I recently installed Everest and noticed that it reported my 8GB being 4096 of physical RAM. Opening task manager confirms this also, yet the BIOS, and the Vista welcome screen says 8GB
I read that the nforcei 680 (?) chipset doesnt use more than 4GB, yet other articles state you need to have MIMO in operation.
Well, I have a quadcore QX6850 processor which supports 64bit computing, IM running Vista Ultimate X64 and have the ASUS P5n32-e Sli motherboard with a 9800 G2 SLI card. So which is true? Do I need to remap the memory? If so how, how? I looked in the BIOS and you can change volate, timings etc but without proper guidance on that IM dead in the water.
Why is Everest/Task manager reporting 8GB as 4GB, yet the BIOS at 8GB etc?
View 7 Replies
View Related
Oct 31, 2008
Okay, so I've had this HP Pavilion with Vista 64 bit less than a week (see specs below) and it's much much faster than my old Dell model [with XP] BUT today I was running a scheduled Hardware Diagnostic and it took like 30-40 min. and towards the end of it I tried to change the Power management so it would not go to Screen Saver mode (as it already had) and when I tried to do so, it took like 3 min. for it to open the Control Panel, 3 more minutes to open the Power Options dialogue, 2-3 more minutes to open the sub-menu there, and so forth - altogether about 8-9 minutes to do this simple task of changing Power Options while running hardware diagnostics.
I can understand that Hardware Diagnostics might take a lot of the computer's resources, but THIS is ridiculous! It was like going back to Windows 98 with 256MB RAM. Problem is, I have this*, so it shouldn't be this slow! Should it??? :
*Pavilion a6750y Desktop
AMD Phenom X4 9650 quad core processor
8gigs PC2 6400 DDR2 SDRAM
750 gig SATA Hard Drive (7200 rpm) (with about 650 gigs of space left!)
ATI Radeon HD 3200 graphics with 256mb memory
2MB L2 _ 2MB shared L3 Cache memory
Windows Vista Home Premium 64bit
Is there a way I can tweak my memory or ? to make this not happen? Or does my computer have a serious problem?
View 2 Replies
View Related
Apr 28, 2008
I installed 8GB of memory and Vista only shows 3.08GB in the system print out. And the system acts like it only has 2GB. My system boot program shows that it sees all 8GB and there is no indication there is a problem with any of it. The motherboard will support even larger modules. Right now I have four modules of 2GB each. What am I doing wrong?
View 9 Replies
View Related
Dec 2, 2009
when its not ...
View 3 Replies
View Related
Nov 4, 2009
My gtx 275 on windows experience index shows as graphics 5.9 and gaming graphics 5.8 WTF ARGGH I just bought this card and before i had a 9800gt which score 5.9 in both whatt? iv refreshed the score twice and i think u guys know which card is better a 9800gt or a gtx 275? Iv got the new beta 195.39 nvidia drivers!
View 9 Replies
View Related
May 9, 2008
I have Vista Home premium for 2 years. About a week ago it slowed to apoint where it may take 5 minutes to respond. Task manager Performance shows about 50% CPU usaage but Processes says 98% idle. If I start in safe mode Task Manager is the same but I seem to get a little better response. I use a free version of AVG.This problem seems to show up a lot in Google but each one seems to get resolved a different way. I tried some things others did but it has had no affect. The last time I started there were about 10 SVCHOST
processes. I ended a few but nothing changed.It takes a long time for one to end because the response is so slow.And it gets slower the longer I am up.
Where do I start to get to the bottom of ths?
View 9 Replies
View Related
Mar 25, 2008
I have a Sony Vaio CR Series Notebook and was wounder how I can watch TV and record shows. I've looked and can't seem to find the right answer.
View 9 Replies
View Related
Mar 26, 2008
Two icons, with the same name, "desktop.ini" have appeared on my desktop and when I open it, this is what the larger one shows. The smaller one has only one entry. I assume they are shortcuts although there is no indication that they are.
[.ShellClassInfo
]LocalizedResourceName=@%SystemRoot%system32shell32.dll,-21769
IconResource=%SystemRoot%system32imageres.dll,-183
[LocalizedFileNames]
Spider Solitaire.lnk=@%SystemRoot%system32gameux.dll,-10061
FreeCell.lnk=@%SystemRoot%system32gameux.dll,-10055
Windows Explorer.lnk=@%SystemRoot%system32shell32.dll,-22067
Windows Mail.lnk=@%ProgramFiles%Windows MailWinMail.exe,-225
What I think happened is that I put a number of programmes on the task bar, immediately to the right of the Windows logo, and perhaps this is the information as to the location of these programmes. Are these shortcuts and, if so, can I delete them? As I went back to check on the items, I also found another "desktop.ini" file in my Documents Folder - it is different from the above two. What is the proper location of these files?
View 6 Replies
View Related
Jun 19, 2008
I know theres a problem with 4GB of ram under Vista 32 but...I've been running Vista 64 Business for a couple of months now, and I only recently noticed this (I believe it was OK before...):Does anyone have ANY idea how this is possible?Bios shows 4GB as well. I'm running an intel D975XBX2 mainboard, with an E6600 CPU @ 3.0Ghz. 4X 1GB Corsair twinX and an ATI HD3870X2 videocard.
View 5 Replies
View Related
Sep 1, 2007
Have recently purchased the upgrade to 64 bit Vista, however, having installed the disc on boot up I expected some sort of instruction on the transfer to 64 Bit procedure. nothing. When I review the details of my PC in the System menu on the Control Panel it still shows me running with 32 Bit. I have even tried to run the set-up from the upgrade DVD but have been refused and told to run from boot-up.
View 5 Replies
View Related
Feb 22, 2009
The vista weather gadget shows a bright sun and says it's clear. I walk outside and it's completely overcast. My location is set to South El Monte CA ( 91733 ). It's about 4:00 pm ( local time ) 2/22/09.
View 4 Replies
View Related
May 22, 2009
I am running Vista x64 and would like to get the best out of the OS as I can, I only use it for gaming-downloading and watching film/TV shows, I have come across a setting in my Bios that is called Virtualization and it is turned on, have try'd to look it up and as far I can see it only needs to be on if you plan to run more than one OS ( witch I don't ) , So would it benefit me to turn it off?
View 5 Replies
View Related
Jul 10, 2009
Recently, the welcome screen seems to be taking such a long time, before it shows the desktop? Is there anyway, in which I can make it load faster? Very annoying? I only have my antivirus as a start up program
View 3 Replies
View Related
Dec 4, 2009
How can I correct this? ..
View 0 Replies
View Related
Feb 20, 2009
Sometimes my hard drive light is flashing like crazy when I'm not running anything. What is Vista doing behind my back? Task Manager shows nothing running.
View 9 Replies
View Related
Dec 10, 2008
my Vista Control Panel shows too many entries. If you look below, you'll see what I mean (Showing all CCC entries...)
View 9 Replies
View Related
