8 GB Shows As 4 GB With P5n32-e Mobo / X64
Mar 4, 2009
Ive had 8 GB in my machine for over a year, all is fine, runs no probs. But I recently installed Everest and noticed that it reported my 8GB being 4096 of physical RAM. Opening task manager confirms this also, yet the BIOS, and the Vista welcome screen says 8GB
I read that the nforcei 680 (?) chipset doesnt use more than 4GB, yet other articles state you need to have MIMO in operation.
Well, I have a quadcore QX6850 processor which supports 64bit computing, IM running Vista Ultimate X64 and have the ASUS P5n32-e Sli motherboard with a 9800 G2 SLI card. So which is true? Do I need to remap the memory? If so how, how? I looked in the BIOS and you can change volate, timings etc but without proper guidance on that IM dead in the water.
Why is Everest/Task manager reporting 8GB as 4GB, yet the BIOS at 8GB etc?
View 7 Replies
ADVERTISEMENT
May 23, 2009
My buddy was bringing over some files for me on his laptop hdd running xp. I plugged it into my vista x64 computer via usb and I am having a few issues. The hdd shows up in My Computer and shows stuff in it but when I open it, it says that the folder is empty. I whent to Vistas disk manager and it shows everything is fine with the hdd but for some reason the files just wont show up.
View 6 Replies
View Related
Mar 23, 2008
i m going to buy a asus hd 3870x2 grapich card but i wounder if it would work with my k9n sli platinum? i think it is 1.0 pci e on that mobo and does any one know if you get less or more power on hd 3870x2 asuse, because there is two different version one with 2x dvi connection and one with 4x dvi , i really wany 4 but if you get more power with the one with 2 i will go for that one .?
View 6 Replies
View Related
Mar 23, 2008
I've had the OEM edition of Vista Ultimate 64 for about a year now. I'm considering a motherboard upgrade (want Phenom and wondering if there is any legitimate way to get my current Vista system running on the new motherboard. Can I pay for a new license and reactivate my existing installation using that license for instance?
View 9 Replies
View Related
Sep 30, 2008
Recently upgraded my RAM and tried to overclock my CPU. OCing the CPU (Q6600) didn't seem to be a problem but the RAM (Corsair 2x2GB TWIN2X4096-8500C5DF) won't run at 1066 at all on my mobo. I just get BSODs.
I've turned the RAM down to 1050 and this gives me one BSOD and then boots and runs ok.
I've got the Q6600 at 2.7.
I'm not happy with this so I've decided I need a mobo upgrade plus a better case .
My local PC guru recommends the Asus P5Q Pro (currently got P5N-E SLI) and I can afford that along with a Coolermaster Cosmos S.
I've looked at the P5Q Deluxe and it doesn't really seem worth the half as much again I'd have to pay. I'm happy with my current GPU (BFG 8800 GTS OC 512) although I might go for a top end ATI when they come down in price.
But basically the P5Q Pro seems to have what I need and is supoosed to be a wicked overclocker.
Does anyone have any experience with this board? I notice it only has 8 phase power rather than 16.
View 9 Replies
View Related
Dec 15, 2008
I have a 780i chipset motherboard, and have Vista64 installed using a Highpoint RAID controller. I'd like to upgrade to a 790i mobo, and would like to know if the 790i board will recognize my existing Windows installation. I don't expect perfect compatibility, just enough to get to the desktop (or even safe mode) so I can install the proper chipset drivers. Anyhow, anybody know if this will work?
View 4 Replies
View Related
Jun 10, 2008
Intel? Core? 2 Extreme QX6850 (8MB,3.67GHz overclocked)
Windows Vista? Ultimate 64-Bit SP1
nVidia GeForce 8800 GTX 768MB
500GB-Seagate 7200RPM, SATA 3.0Gb/s,16MB Cache
Western Digital 750GB External Hard Drive
4GB Dual Channel DDR2 SDRAM at 800MHz-4 DIMMs
Sound Blaster? X-Fi? XtremeGamer
Logitech? Z-5500 THX-Certified 505-Watt 5.1 Digital Surround
Logitech? MX? Revolution Cordless Laser Mouse
Dell UltraSharp? 2707WFP LCD
PSU:1,000W
3DMark Vantage:6,023
3DMark06 Professional :12,950(1920X1200)
View 9 Replies
View Related
Feb 10, 2010
I would like to move my current mobo and my Vista home premium to another machine. I have to do a clean install of Vista as the target machine has XP installed. I noticed that under computer properties the Product key is an OEM key. This key is different from the key that is on the back of the CD box with the Vista software . The key at the rear of the CD box is the same one as the back up key I extracted .Since the mobo and vista is move as a pair , will I run into activation problems?
View 7 Replies
View Related
Aug 12, 2008
so intel is bringing the new core i7 cpu. but must we buy new mobo's to used them or are the compatible with the current mobo's????
View 6 Replies
View Related
Feb 28, 2009
I have a Sony desktop water cooled running a Pentium D 2.8 / Vista 32 Micro ATX and wanted to get the groups ideas on replacing the board / chip / memory with something that will beat the current Vista score of 4.7 for the CPU. Rest of components run at 5.9. No gaming at all I just want to be able to use my CAD and rendering programs much faster which are now using 100% CPU. Current PS is 385 watts. Planning to go to 64 bit with next CAD update.
View 6 Replies
View Related
Jun 25, 2008
My motherboard has become quite unreliable and I was thinking of buying
a new one however I can't get the same model because its no longer produced.
Would my OEM license key still work on another motherboard?
View 9 Replies
View Related
Mar 17, 2009
I'm interested in overclocking my rig. I just built the rig from the ground-up a week ago when I got everything in from Newegg. I figured it's time to get over WoW, and start playing CoD4/5 and Crysis, which to be honest, run fine already on my computer. But for some reason I still want to give it a try. Now since this is also the first time I've even considered this, I'm completely confused as to the best way to figure out what to do in my bios to properly overclock my cpu, mobo, ram and gpu. So here are a couple of questions:
A) If I'm already running Crysis at high settings (not sure if I had the demo at the highest or just high), should I even try to overclock my rig? (I plan on installing the Adobe suite to do some web design and flash work now too.)
B) Can anyone direct me to a site where I can find the proper equations for overclocking?
C) Can anyone suggest what they consider is the best temperature monitoring program for all of the components? I downloaded the Monitoring program from Nvidia, but it isn't working properly on my machine? The program spec's on their site name my mobo and gpu as being compatible with the program, but it will not display my gpu and when I try to select it the program crashes.
View 9 Replies
View Related
Jun 20, 2009
how can i overclock my cpu (AMD Phenom II X3 710 & Ecs Gf8200a Phenom-2 X4 Quad Core Mboard)? I do have Frequency / Voltage control in the bios. But i have never overclocked before so not sure how to do it correctly.
View 9 Replies
View Related
Jan 8, 2010
I installed this new motherboard with all my pre-existing other components and it boots fine and it can run but i keep getting a blue screen kind of often. I've heard this board can blue screen if the voltages to ram exceed 2.0 V but mine are set at 1.9 V so that should be fine. I completely formatted my drive and did a clean install of Windows Vista 32bit on a single partition. The error i'm getting is: A problem has been detected and windows has been shut down to prevent damage to your computer. ***STOP 0x00000024 (0x001904AB, 0x93c23B90, 0x93c2388C, 0x8994D9c4) ***Ntfs.sys - Address 8994D9C4 base at 898A7000, Datestamp 4549aceb I have seen this one a few times now. I'm confused as to what i should try next. I could get some hard disk drive scanners to look for problems and run a chkdsk or format and reinstall and reset my CMOS, again, but I feel like something else is wrong.
However, I do believe it has something to do with the HDD since its been dealing with information slower and tends to crash when i'm dealing with partitions, restarting after installing updates or programs or otherwise failing to do so or freezing (not responding) during install. I've tried safe mode but it does it there too. My HDD makes the same noise as it always did and the HDD light blinks normally. I really hope i can fix this problem without having to go out and buy a new HDD but this problem just started after I installed my new mobo so I would like to seek some outside advice for my problem.
View 8 Replies
View Related
Apr 3, 2009
I am installing a new Gigabyte mobo (MA78GM-US2H) in an HP Media Center Case. The pin layout between the case & mobo is nearly the same except that the HD LED and the Power LED are reversed on the new mobo. The power switch pins are correct. The case does not have reset capability. Does it matter that the two LED pin connectors are reversed or should I attempt to change the wires coming from the case?
View 4 Replies
View Related
Oct 7, 2008
I just installed Vista Ultimate 64 bit on a new pc I just built. System properties shows 64-bit Operating system. But when I go to display settings the tab where it says "color" says Highest(32 bit). What does that mean? Does one have any thing to do with the other? My PC Specs:MoBo: Asus M3A32-MVP Deluxe/WiFi-AP, a MSI RX3870-T2D512E OCgraphics card. 2gig memory And a AMD Phenom X4 9600.
View 3 Replies
View Related
Jun 3, 2008
im a bit confused a got 4gb ram on my pc but windows vista only shows it as 2gb, does this mean my computers only using 2gb ram because im doing high render animations and i need the full potentional of the 4gb.I have an xps 730?
View 8 Replies
View Related
Mar 19, 2008
Well, I did installed SP1 today. Everything (the installation) went fine! After it finished, I checked again the WU and got the update for my Realtek AC'97 which I was trying to avoid. Although, I ended up installing it because I read somewhere that it needed to be updated for the SP1. Now, this update (Realtek) doesn't fixed anything since now every time I right-click on the little speaker and select Playback/Recording Devices then I get a message with: "Windows has detected that audio enhancements for the following device are causing problems: Realtek blah, blah, blah..." Can anybody explain that?
But now, the real good one, I have only 1GB of memory but when I go into the properties of the computer, then it tells me that I have 8GB installed... Don't I wish!!! So, I thought, hmmm, maybe if I remove the 1GB and try only 512MB then Vista will recognize its mistake. Well, guess what, I got then instead 4GB available showing on the properties... Strange! Very strange, I thought to myself... Funny is that the task manager shows the correct amount of memory! Have any of you had such a situation too??? I did already an uninstall of the SP1 which came from the WU and installed the one from the download link in Microsoft website. But, as you guess, it made no difference...
View 5 Replies
View Related
Dec 19, 2008
I have an 8GB SanDisk Cruzer drive and when I plug it into Vista it only shows 6.43GB. Is this normal? If so where is the other 1.5GB'ish of space gone?
View 6 Replies
View Related
Apr 14, 2008
I have a Lenovo X61 machine with Windows Vista. I have 3 GB RAM...1GB+2GB in the 2 memory slots. I got a new 2GB RAM and pulled upgraded the machine to 4GB by pulling out the 1GB. After the installation, the BIOS shows 4GB RAM, but Windows shows only 3GB. In computer properties, it shows 3062MB. In system information, it shows
Total Physical Memory - 3061.50 MB
Available Physical Memory - 1.32 GB
Total Virtual Memory - 6.16 GB
Available Virtual Memory - 4.36 GB
Page File Space - 3.28 GB
Why is it not detecting the 4GB Memory though it shows up in BIOS. Do I need to upgrade anything or change any settings?
View 4 Replies
View Related
Oct 31, 2008
Okay, so I've had this HP Pavilion with Vista 64 bit less than a week (see specs below) and it's much much faster than my old Dell model [with XP] BUT today I was running a scheduled Hardware Diagnostic and it took like 30-40 min. and towards the end of it I tried to change the Power management so it would not go to Screen Saver mode (as it already had) and when I tried to do so, it took like 3 min. for it to open the Control Panel, 3 more minutes to open the Power Options dialogue, 2-3 more minutes to open the sub-menu there, and so forth - altogether about 8-9 minutes to do this simple task of changing Power Options while running hardware diagnostics.
I can understand that Hardware Diagnostics might take a lot of the computer's resources, but THIS is ridiculous! It was like going back to Windows 98 with 256MB RAM. Problem is, I have this*, so it shouldn't be this slow! Should it??? :
*Pavilion a6750y Desktop
AMD Phenom X4 9650 quad core processor
8gigs PC2 6400 DDR2 SDRAM
750 gig SATA Hard Drive (7200 rpm) (with about 650 gigs of space left!)
ATI Radeon HD 3200 graphics with 256mb memory
2MB L2 _ 2MB shared L3 Cache memory
Windows Vista Home Premium 64bit
Is there a way I can tweak my memory or ? to make this not happen? Or does my computer have a serious problem?
View 2 Replies
View Related
Apr 28, 2008
I installed 8GB of memory and Vista only shows 3.08GB in the system print out. And the system acts like it only has 2GB. My system boot program shows that it sees all 8GB and there is no indication there is a problem with any of it. The motherboard will support even larger modules. Right now I have four modules of 2GB each. What am I doing wrong?
View 9 Replies
View Related
Dec 2, 2009
when its not ...
View 3 Replies
View Related
Nov 4, 2009
My gtx 275 on windows experience index shows as graphics 5.9 and gaming graphics 5.8 WTF ARGGH I just bought this card and before i had a 9800gt which score 5.9 in both whatt? iv refreshed the score twice and i think u guys know which card is better a 9800gt or a gtx 275? Iv got the new beta 195.39 nvidia drivers!
View 9 Replies
View Related
May 9, 2008
I have Vista Home premium for 2 years. About a week ago it slowed to apoint where it may take 5 minutes to respond. Task manager Performance shows about 50% CPU usaage but Processes says 98% idle. If I start in safe mode Task Manager is the same but I seem to get a little better response. I use a free version of AVG.This problem seems to show up a lot in Google but each one seems to get resolved a different way. I tried some things others did but it has had no affect. The last time I started there were about 10 SVCHOST
processes. I ended a few but nothing changed.It takes a long time for one to end because the response is so slow.And it gets slower the longer I am up.
Where do I start to get to the bottom of ths?
View 9 Replies
View Related
Mar 25, 2008
I have a Sony Vaio CR Series Notebook and was wounder how I can watch TV and record shows. I've looked and can't seem to find the right answer.
View 9 Replies
View Related
Mar 26, 2008
Two icons, with the same name, "desktop.ini" have appeared on my desktop and when I open it, this is what the larger one shows. The smaller one has only one entry. I assume they are shortcuts although there is no indication that they are.
[.ShellClassInfo
]LocalizedResourceName=@%SystemRoot%system32shell32.dll,-21769
IconResource=%SystemRoot%system32imageres.dll,-183
[LocalizedFileNames]
Spider Solitaire.lnk=@%SystemRoot%system32gameux.dll,-10061
FreeCell.lnk=@%SystemRoot%system32gameux.dll,-10055
Windows Explorer.lnk=@%SystemRoot%system32shell32.dll,-22067
Windows Mail.lnk=@%ProgramFiles%Windows MailWinMail.exe,-225
What I think happened is that I put a number of programmes on the task bar, immediately to the right of the Windows logo, and perhaps this is the information as to the location of these programmes. Are these shortcuts and, if so, can I delete them? As I went back to check on the items, I also found another "desktop.ini" file in my Documents Folder - it is different from the above two. What is the proper location of these files?
View 6 Replies
View Related
Jun 19, 2008
I know theres a problem with 4GB of ram under Vista 32 but...I've been running Vista 64 Business for a couple of months now, and I only recently noticed this (I believe it was OK before...):Does anyone have ANY idea how this is possible?Bios shows 4GB as well. I'm running an intel D975XBX2 mainboard, with an E6600 CPU @ 3.0Ghz. 4X 1GB Corsair twinX and an ATI HD3870X2 videocard.
View 5 Replies
View Related
Sep 1, 2007
Have recently purchased the upgrade to 64 bit Vista, however, having installed the disc on boot up I expected some sort of instruction on the transfer to 64 Bit procedure. nothing. When I review the details of my PC in the System menu on the Control Panel it still shows me running with 32 Bit. I have even tried to run the set-up from the upgrade DVD but have been refused and told to run from boot-up.
View 5 Replies
View Related
Feb 22, 2009
The vista weather gadget shows a bright sun and says it's clear. I walk outside and it's completely overcast. My location is set to South El Monte CA ( 91733 ). It's about 4:00 pm ( local time ) 2/22/09.
View 4 Replies
View Related
May 22, 2009
I am running Vista x64 and would like to get the best out of the OS as I can, I only use it for gaming-downloading and watching film/TV shows, I have come across a setting in my Bios that is called Virtualization and it is turned on, have try'd to look it up and as far I can see it only needs to be on if you plan to run more than one OS ( witch I don't ) , So would it benefit me to turn it off?
View 5 Replies
View Related
