I recently purchased a hp laptop running Vista Home Premium. I've been quite pleased, but have a minor issue with the read only permissions. While trying to move a file in an .iso image on a virtual drive, Vista said it needed permission to preform the action. I clicked the allow button, and it seemed to continue, only to tell me moments later that I needed permission. I looked into the issue, and discovered that the folders were both read-only, an attribute I've tried to remove several times. Any ideas? And yes, I am logged in as the admin.
How do you edit a virtual pc hard drive image so that you can add files onto. So that if you have say MS-DOS 7.1 running on virtual pc and want to add SIMCITY 2000 to its virtual hardrive. Then you could run SIMCITY 2000 from dos on windows vista. And once simcity 2000 is added to the virtual hardrive how do I execute SC2000.exe from dos or dos shell.
First off, why is there no microsoft group for windows 7? Secondly, and my question is windows 7 based, I want to create an image of my old XP computer & install it on my Windows 7 computer, so it will run under virtual PC. Is this possible?
When I try to print a web site image to an Adobe PDF file, Vista states that for security purposes the pdf file will be placed in a "virtual" temporary internet file folder, then opens the virtual folder on C drive, but then doesn't save the file in the folder. I've been able to work around the problem by disabling all user account control security, but there has to be an easier way. I'd like to save files without security forcing them to a specific folder.
I have a Sony Vaio laptop with Vista Home + SP1. It came with just a C drive. I decided to create a second D drive so that the operational side would be on C drive and data would be on D drive. The intention was to create a situation where, if I had to use the recovery disk, it could just replace C drive with the factory settings, while leaving data in place on D. But now I want to remove the separate drive D and restore the space to drive C. I have backed up everything in drive D to external media. However, whatever I do, I cannot find a way to simply dump drive D and have the space reallocated to drive C. THe system will let me create additonal drives, and shrink drives, but not just reallocate them to C drive. Of course, if all else fails, I can restore all my data to drive D, but for reasons associated with the use of an iPod I want the maximum space available in C drive to cope with this. But I can find no way to do this.
I'm messing around with this motherboard my dad had RMA'd to see if I can turn it into a usuable computer. Works fine but the one thing that's got me perplexed is the DVD drives plugged into it. The DVD writer seems to "read when it wants to", which is really weird. A lot of the time, it just won't read anything but sometimes it does read discs (I even burnt a disc using it). The drive is there in Windows Explorer and the BIOS also catches it but I can't get it to boot from the DVD drive (but it DID boot once so I managed to install Windows from it). In Windows I put discs in and it makes no attempt to read them...unless it suddenly WANTS to read them and then does. Does this make any sense? A drive almost literally reading discs when it feels like it wants to read them.
If i put any memory device in, it says i must format the disk before i can use it...but I have alot of information on them and its pointless to delete information that i want to see. If i click on the properties of the disk it says i have 0% unused information. I turned auto play off and even uninstalled ROXIO. With ROXIO deleted, the cd drive now says i must insert a disk but there is already one in there. The other drives still say the same as they did before ROXIO was deleted. This problem started off as the cd drive only messing up sometimes. Then it stopped working completely. Within a few weeks i couldnt use any of the drives. Ive tried many diagnostic tests and no luck.
I have a problem with a USB flash drive I have had for quite a while, that Windows Vista insists all the files and folders on it are read-only. I can create a new directory on the drive, but not rename it, and I can copy files onto the drive, but not delete them from the drive. I have found no way to correct the problem. For example if I look at the properties of folder on the drive and uncheck the "read only" checkbox, it does it, but is read-only the next time I try to use it. Does anyone know the source of this curious behaviour (which a few other people have also reported) and how to fix it?
tried to install a game on dvd on my new computer and pioneer dvr-118lbk wouldn't read it. installed vista home premium 64, mb driver, controller driver, and some other drivers. tried to play a dvd on computer and it wouldn't read it either. device manager tells me it is up to date, but says it is a cd-rom drive. what should i try?
I have a TSST DVD +- RW TS -H653A SCSI drive. Computer is Dell Inspiron 531 running Vista Home Premium. The drive will not read DVD Ram disk. Does anyone know if an update is available to enable this drive to read DVD Ram. I have been searching, but cannot so far at least, come across an updated driver.
Is there a program that would allow to burn the bootable ISO image into the SDHC card or flash drive?
My notebook has an option in BIOS to boot from the flash drive, but I cannot figure out how to create it. It seems that the regular CD burner programs do not do this.
I recently had to re-image my hard drive. I was running Vista Home Premium with SP1 installed. After the re-image I went to Windows Update and downloaded and installed over 80 updates. But I was not offered SP1 or SP2. My question is, do I need them? All of my original programs that I re-installed seem to be working right.
my DVD-drive doesn't read disc's. The drive I'm using is TSSTcorp SH-S223Q ATA, so a Samsung DVD-drive. When I bought it, it read fine, but not anymore. It doesn't read even bootable disc's (I tried Vista Ultimate x64). I've tried upgrading firmware from B00 to B03, but it didn't help. I had a similar problem when I bought this computer in August 2008. My DVD-drive read the disc's fine for couple weeks or so and then it stopped working. Then I replaced it with this drive (It's not the same model). This one worked fine for a month or two and stopped working, so it's been couple of months not functioning. I just did a fresh install of Vista yesterday and the problem is still here.
im trying to regain write-access to an external hard drive which, after a reboot, Vista decided it would no longer let me write anything to...(worth repeating, i didnt change any setting in order for this to happen, i just rebooted!) In an earlier question on this issue someone suggested the followin The problem is that i cannot finally get the permissions back to normal following these steps. At the last "click on the OK button" i get an alert telling me various files are read only (Vista alerts to one file at a time, obviously) and therefore is unable to make the required changes.
i'm at the end of my wits here i have lite on dvdrw drive that wont reed cd's but plays dvd's now i have removed in from my computer and tryed in 2 other computers and it reeds and writes anything fine but as soon an it is back in this computer with Vista Ultimate 32bit it wont reed cd's i have tryed all the driver things i even formatted my computer and it worked for a few weeks then back to the same thing i even pulled it and put in a cdrw but it would not reed so i tryed a dvd rom and it worked ireally dont get it.
I have Home Premium 64-bits, installed one month ago and never tried this until now. When I insert a blank DVD or CD, it doesn't show anything and then I got to My Computer and double click the DVD icon and I get the message that "Windows can not read the disk on drive D:" or something like that. So I went to the manufacturer site and downloaded firmware, updated, rebooted and still having the same issue. However I can read used disks, and I can burn perfectly using third party burning software. What is going on?
Using VISTA Ultimate on an IBM T60p laptop. I am going to upgrade the hard drive from 100 to 320 GB. I have a 300GB SimpleTech external drive. I want to copy (image) the current hard drive to the SimpleTech, replace the hard drive and copy the image of from the SimpleTech back to the new drive.
1. Can this be done? 2. What software should one use? 3. Where would one find the steps necessary to do the imaging portion. (I can handle the hardware.)
------ Unrelated - why can't I make a post on the Microsoft website to this Newsgroup? Everytime I click New and choose Question I get a hand with a explosion symbol and nothing else?
I am having a quirky issue with my DVD drive and hopefully someone will know where to start. It seems that the drive will read CDs (opening them in iTunes) and music DVDs (playing in Mplayer), but the system completely hangs and freezes when trying to load a data disc. Specifically, the system will continually try and open the DVD (spinning away) and cause serious lag to the computer. When trying to eject the DVD, it will then cause the computer to freeze and require a reboot.
The data discs that I'm using are all programs that I've previously loaded on my XP install, so I know the discs aren't corrupt. I'm also running a 32 bit version of Vista, so I'm not worried about 64 bit compatibility issues. The drive is a Lite-on (DH-20A4P) IDE based drive, set as Master on the cable. There are no other devices hooked to the IDE cable, and the cable is also brand new (came with motherboard). Here's the steps I've taken thus far to diagnose the problem -- with no fixes working.
- Downloaded and installed newest drivers for the DVD drive - Flashed the DVD drive firmware with most current version - Uninstalled then reinstalled DVD drive through Device Manager - Disabled autorun feature - Checked connections from drive to motherboard
The drive obviously is working properly since I'm able to play CDs and DVD movies/music. It might be worth noting that I used this same drive to install Vista, but perhaps the updates horked my drive? I'm thinking this is a Vista software issue, but can't think of anything else to try. I'm also hesitant to wipe and reinstall Vista for such a small issue.
I just got a new HP desktop with 64bit Home Premium. My external, which I loaded from my Dell laptop (with Windows XP), now is all read-only. (The read only box is filled, rather than checked.) I cannot modify any files in he drive, but can access them all. I have already tried the following proposed fixes with no success:
- Right-click on drive; properties; tools tab; check now; unchecked both boxes and started and completed the check with no errors - Changed drive ownership to administrator - Changed drive ownership to my personal account
After each of these I tried to clear the read-only box, but the files still can't be modified, and the filled box is back when I re-open the properties on folders inside the drive.
Hard drive died, replaced, reloaded Vista Premium x64. I can read the files on the bad hard drive, have attached as an external drive and want to transfer all Windows Mail files to the new hard drive and then restart Windows Mail. Is this possible? Can all files be transferred? The files and folders are in (user name)/App Data/Local/Microsoft/Windows Mail. Can I just replace the Windows Mail folder with the folder from the old drive? Are there additional files that will need to be copied?
Am I correct in assuming that, for Windows ME to run in a Virtual PC 2007 window, the Windows ME virtual disk must be located inside a disk partition that is FAT32? On a test run, I tried to install WinME on a virtual disk in a folder that was in my normal Vista partition (NTFS), and it didn't get far. I tried placing the WinME virtual disk inside an FAT32 partition, and although I didn't finish the installation process, I got that far, with the WinME instalation screen having popped up and ready for installation. One other thing: Is it possible to place the WinME virtual disk inside a logical FAT32 partition? Or must it be a primary partition?
I just finished setting up my Media Center on Vista Home Premium, got all the latest drivers and SP1 and updates. DVD playback is giving me some trouble though, and I've resorted to playing them on my 4-5 year old DVD player instead, which is just plain stupid when I have this whole machine set up with Vista Media Center. I've experienced several problems:
1) No sound.
I have the sound card stereo cable going into the back of the TV, it's possible that VMC isn't downsampling the 5.1 audio to stereo and that it's outputting it over a different port.
2) Drive noise
VMC spins up the drive, as if it's buffering up, then slows it down, then spins it up again, then slows down. It's really annoying as you can imagine. Is there a way to make it read the DVD video disc at a constant, lower speed? Say 2x or 4x ?
3) Jittery image
When played on a standalone player the DVD is fine. However on Vista Media Center it's a bit "jumpy". You can see this quite clearly for example on the credits, text appears (for example film title) and it's jittery, moving up and down a tiny bit. On the standalone player its perfectly stable.
4) Image colors
There's a warning text at the start of the DVD, the general copyright thing. The background is blue on a standalone player, but when played through VMC it's pink?! Definitely too much red on the output.
I have the following issue and hope that somebody can give me a hint about what might be going on! My system has two raid 1 arrays - one is running on XP Professional SP3 the other one is running on Vista x64 Ultimate SP1. When I start my virtual machines (either from the Virtual PC console or when double-clicking the *.vmc files) than everything is working fine on XP and the virtual machines are booting and running as expected. However, on Vista the following is happening (and I hope somebody has an idea):
1. Starting the Virtual machines from the console leads to an immediate reboot of my host machine (I can't even see any boot screen of the virtual machine - it is like clicking start in the VPC console -- > reboot of host).
Is there a program that can act as a virtual microphone? (That is,that creates a dummy mic device and that takes an input audio file to put it as an input signal?)
I am running Vista 32bit with 4gigs of ram, AMD Phenom 9950, just put in an ATI 4870X2 with 8.11 drivers. I have two hard drives, one 250gb with the OS and FS9 and FSX on it and another 500gb with really nothing on it. I have my virtual memory set up as follows:
C: and D: drive set to system managed. Should I set the custom size and to what intial and max size?
Im leaning towards the 4870x2 card the cause of the memory leak not sure if it is a driver issue, might install the 5.8 version and see what happens. Also, plan on moving FS9 and FSX to the bigger drive.
I have been having virtual memory problems but thet have never happened to me before in the 1 year that i had this pc and the weird thing is that its not like all the ram is being used only like 1.05GB ram is being used.I was wondering if this problem can be solved this is ver frustrating cause it closes my programs and interrupts wat im doing without saving i was playing the sims 2 and i lost all the progress that i made because of the dam low virtual memory, at the time the only program i had running was the sims 2 and nothing else and ive played the sims 2 so many times in the past and never have i gotten this error, this also happens when i am just browsing the web.
I recently built a new computer and installed Vista Ultimate. I plan on installing XP Pro as a virtual OS. I'm new to this and was wondering how much HD space to allocate for this install. Do you allow space just for the OS or for added programs as well? Also, if I understand correctly, both OS's actually run at the same time. Does this create a problem with resources, or can you put one OS in down mode while using the other? I have a quad core Q6600 and 4 GB of RAM. Hard drive is WD 500 GB.
I have installed Virtual CD software in my system. but when i am setting the emulation for drives, none of them are appearing in "My Computer". The software is saying that the iso image has been mounted, but i am not able to see the same. I tried some another ISO mounting softwares also. But all showing the same problem.
I am d/l from Ms site and not pirating. I am trying to use it with Virtual Server SP1 also d/l fresh. I have no new machine. I wrote to ms but got no reply. hence I post here.
