Any program that i open only seems to open up to a certain point? how can i make it open all the way. It never did this before but i want to have full screen. There is an attached image of this.
View 4 RepliesWhen I try to open some of my programs I get the error message, "The pipe state is invalid". whenever I leave the computer in Sleep mode and there after retrieve it, my Samsung Printer ML-2240 series stops working. When I give a command, "Find a Printer", the error message appears "The pipe state is invalid". This happens so often that I get very annoyed and am unable to use the computer to its optimum capacity.
View 8 Replies View RelatedI didn't have this annoyance in WinXP but I do in WinVista. It forgets recently opened text files for example, I have a daily "note" file which gets registered in "Recendly Opened Docs" (click Start-->Documents) for ONE sesssion, if I reboot or just work for many hours/next day it's not there and I have to go search in WinExplorer for the d*** file?
Please don't tell me to turn ON Taskbar options "store & display a list of recently open files/prgrams" - those options are both on, also I've been doing computers for decades.Something else is going on here, it's not my settings at fault.Plus, ironically Vista remembers a bunch of OLD files I opened ages ago and still listed as "recently opened" I am tired of looking up for files (in File System/WinExplorer) which I used
to open with TWO CLICKS in WinXP. Yes I can place them all in a conveniently accessible folder, but do NOT want to, it's user's right to keep files where user wants to, especially b/c duplicates/confusion would arise & my system is loaded with a Million files.
I have a problem with microsoft office programs that will not open in the vista start menu? When clicking on a program from the start menu, won't run. When clicking the same program from the start menu -> program folder, it will run. What could be? I am not using the classic menu. I have tried to re-pin them,but still they will not open??, all other programs are ok.
View 5 Replies View RelatedI have a blue screen problem. Before you say anything, I have searched the forum for similar issues. Although I have found a lot of topic on blue screen problems, none is similar to mine. I dont know how this could be. Everything was fine, and all of a sudden, I start up my computer one day...it goes to desktop for like 1 min and then blue screen. I didnt install any new programs or hardware. I can run safemode with networking fine... which is how I can write on this forum. Here is what is says on safemode
Additional information about the problem:
BCCode: 3b
BCP1: 00000000C000001D
BCP2: FFFFFA600DE94D30
BCP3: FFFFFA600C160020
BCP4: 0000000000000000
OS Version: 6_0_6001
Service Pack: 1_0...............
I just built my first computer, I am a relative noob to all of this. I am having some issues that I am not even sure if is caused by Vista or not. I am crashing out of a couple of programs and I am crashing out of windows- as in the system goes to the blue screen and restarts.
What info do I need to tell you in order to have you help me figure this out?
Nothing is oced.
System is all brand new:
Vista 64 bit
MB GIGABYTE GA-X48T-DQ6 775 X48 RT
Cpu - Q6600
MEM 2Gx2 MUSHKIN 996629 DDR3
HD Western Digital Caviar Black 1TB 7200 RPM 32MB Cache SATA 3.0Gb
GPU SAPPHIRE 4870X2
PSU is 1000w PC Power and Cooling
PU temp is 35c to 45c ish
The OpenOffice.org Community is today announcing the general availability of OpenOffice.org Version 3. Right from the opening screen, OpenOffice.org 3 has a fresh new look, with a new start screen, new splash screen, new icons, and a host of usability improvements.
The Writer word processor has a cool new slider control for zooming, allows multi-page display while editing, has powerful new multilingual support, and boasts improved notes capabilities. As well as conventional office documents, Writer can now edit wiki documents for the web. The Calc spreadsheet has been given another increase in capacity - now up to 1024 columns per sheet. It also has a powerful new equation solver, and a great new collaboration feature for multiple users.......
For the past week I have been having problems where (while playing a MMO) my computer suddenly freezes, screen goes black. I cant do anything other than reboot (a couple of times my pc has automatically rebooted). Support for the game I play suggested re-installing graphics drivers to no avail. When I reboot and I look in the problem signatute,
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 2057
Additional information about the problem:
BCCode: 333
BCP1: 0000000000000001.............When I try to look at the minidump file, I get a access to C:WindowsMinidump is denied - even though I am logged in as an administrator. Im not even sure which program to open a minidump file with.Can anyone offer me any advice, firstly on what this bluescreen BCC 333 is, and secondly how I can open the minidump so I can find out more!
I have a Vista and XP LAN. The problem is when I open the network screen from the start menu it sometimes shows my XP machine and sometimes it doesn't. any ideas?
View 5 Replies View RelatedAny one have any issues with part of the words on the left hand side of the screen missing when microsoft office outlook is open? It's really wierd, sometimes the whole word is there and somtimes like the last one or two letters are mising but nothing that seems regular from day to day. Like on the name "Sent Items" sometimes it just says "Sent Iten"
View 6 Replies View RelatedI am currently running Vista Ultimate (32 bit) with an Intel E6400 chip and 4 gig of ram. When I open an Excel file and go to the page set-up, my screen start pulsating and it is difficult to get the drop-down menues to work. At the
same time I have a small circle that indicates the program is grinding away. I have had similar issues with Word when I try to print an envelope. This has also happened with other software applications such as Quicken 2008. Rebooting the machine temporaily solves the problem, but not alway.
I do not want to see any of the programs at the top of the list of All Programs (especially Internet Explorer). I just want to see the program folders listed, preferably sorted by newest or most recently modified first, by alphabetically would be OK. How to get rid of the 8 programs shown in here? Thanks.
View 6 Replies View RelatedIve been having a few problems with uninstalling some programs via the add/remove programs tool. For example I have been trying to uninstall Itunes and everytime I do Windows installer says it is preparing to remove and then it stops and a window come up that says "The system administrator has set policies to prevent this installation." and then another one says I do not have sufficient access to uninstall Itunes and to please contact system administrator.
So I spoke to a friend how recommended this forum subject and I followed the Take Ownership steps a few times but to no avail it still does the same thing. I can't update Itunes untill this one is uninstalled!!!!!
I use Vista 32 Ultimate and I have this problem during the startup of Windows: The UAC control stops 2 programs and I'm not able to let these programs load with UAC control active. Tried everything also in Windows defender but no success. I must always confirm and let run these programs clicking on the UAC block tray icon that appear during the load of these 2 programs. Someone tell me that these programs blocked by UAC must be updated from the developers to pass the UAC.
View 9 Replies View Relatedwhen i go to start, all programs, all my folders/programs show up, but then i noticed that theres a "programs" folder within the list, and when i click that, it shows all the same folders/programs that are in the "all programs" list. but then some of the folders within the ones in the 'all programs" list, they are empty, but they show up in the programs folder in the list. i dont know how this happened and i just wanted to know how to fix this issue.
View 2 Replies View RelatedThis morning, I started my computer, logged on and went on the Start Menu to access Microsoft Office programs. But when I went on the 'All Programs' menu, there were no programs listed! I really mean NO PROGRAMS AT ALL. This includes Microsoft Office folder and every other software and program i have got!.
View 4 Replies View RelatedI just got my new computer with Vista Home Premium x64, from Windows Professional XP. Installed programs are not showing up at Start/All Programs. Some are in directory C: Programs or Program Files (x86) and still dont't show up.
View 4 Replies View RelatedUsing Vista Home Premium with SP1. I cannot open a .dat file and cannot set an association to open it because .dat is not listed in the Set Association menu. How do I get .dat listed so that I can set an association to it?
View 9 Replies View RelatedOutlook 2007 installed,and working fine. I needed to open winmail and found that it did not open. Found it running in taskman, but there is no winmail program window available.
I have tried:
1)delete winmail reg entries
2)delete winmail storage folders
3)rename winmail.exe file....
None of the above worked. Specifically, the results of points above:
1)started winmail after deleting reg entries,just remade them,is all.
2)ditto for point 2
3)nothing happens when double click renamed winmail.exe...
I dont want to use another program. I needed to visually advise someone about adding signatures,but winmail did not start. Yes I could do an internet search, but that is not the point-winmail is broken somehow and I wish to fix it.
When I boot up in the morning, I have to wait 20 to 30 mins before Outlook 07 will connect to my Exchange 2003 server. Until then, when I try to open Outlook it says, cannot open the default e-mail folders. And it suggests there is a network issue or that the Exchange server is down. These are not the case. The Exchange server is up and there are no network issues. I have many other computers attached to the network and none of them have this issue. Some our XP Pro/Office 07, some are XP Pro/Office 2003. The big difference with my machine is that it is Vista.
After about 20 to 30 minutes, wow! it connects! And then it's good for the rest of the day. I usually only minimize Outlook after I actually get it open so the connection is maintained throughout the day. I'm not sure what would happen if I closed it completely. But one thing is for sure, every morning, it takes 20 to 30 minutes before it will connect. Eventually, it always connects.
I do not know how this happened but there is a folder called "Programs" in "All Programs". The content of the "Programs" folder is a duplicate of what are in the "All Programs" except "Programs" folder. How can I get rid of this duplicate?
View 9 Replies View RelatedI am building a new system and have a new copy of Vista Home Premium 32bit.
I got it all put together and tried to load Vista. It got to the Windows is loading files screen and then screen in getting black video. Keyboad and mouse stopped working at times. So I updated the board BIO's per intel through iso image and same thing. So I tried installing XP and got to the F8 screen to accept lic. and it just reboots everytime.
Any ideas why Vista would stop? Added the info about the XP install so it may help.
System:
Intel D975XBX2 mobo
Corsair 2048MB PC6400 DDR2 800MHz DHX
BFG GeForce 8800 GTX OC 768MB PCIe
Intel Quad Core Kentsfield 2.4Ghz Q6600 CPU
SoundBlaster xFi XtremeMusic
500GB SATA/300 Baracuda
Siteck Eclipse keyboard
Logitech G5 laser mouse
Viewsonic VX924 LCD
Lite-ON 20X DVDRW SATA LH-20A1S-12 Super-Multi Int
Masscool 8WA741 CPU FAN w/Heat Pipes 775
I know this is a Vista news group but I haven't been able to find a Windows 7 group so maybe one of you guys can answer my question. I have the power settings to never put computer or screen to sleep and there is no screen saver setup. When I leave my computer alone for awhile the screen goes black. This never happened with Vista when setup this way why is Windows 7 doing this?
View 9 Replies View RelatedSomething very odd happened today. I was as usual loading a large file ( 5.4gb ) in to Photoshop and as PS was doing it's business I noticed everything jumped over to my second monitor and the main monitor went blank. Moments later the image on the second monitor turned into a garbled fragmented mess before going into power save mode from which I couldn't get out of. Very strange.....Forced a warm boot. As the system had just been turned on so I can sort of rule out a heat issue - possibly & ram test OK. My workstation is mainly off line but two days ago I had to ftp something and I do remember vista installing an automatic update for windows update (without my permission) which I was very annoyed about, shame on you MS.....and after rebooting I saw a few reg. modifications come up on screen. Could this be the cause of this odd behavior. It's been fine since I had the warm boot - any ideas as to what's going on.
View 9 Replies View RelatedI've had voltage issues causing my computer to freeze or reboot during games and dvds. Fixed that and the computer was fine after memtest showing no problems. That was late Dec.
A few days ago, the computer would go to a blue screen saying it's dumping physical memory and then automatically reboots. Thinking my harddisk might be collapsing on me (I have a seagate barracuda 7200.11 500Gb HD with the SD15 firmware, the infamous crash friendly HD), I flash the HD with the SD1A firmware from seagate, then it was fine. 2days later, Catalyst started to cause problems by not responding, so I formated the drive and reinstalled vista ultimate, along with Catalyst, drivers from Mobo manufacturer ASUS, plus a couple of other softwares. That was yesterday, and now I'm getting the same blue screen back, or the computer just freezes.
I have recently bought a new PC running Windows Vista Home Premium. I have loaded the above programs for my son and when they a running the screen is not centred and the is a black bar to the right of the screen approx 3 cm wide. I have tried to run the games in compatibility mode and as adminstrator as recommended with other games but with no success.
View 7 Replies View RelatedI am having a very wierd issue with vista's screen saver. So basically when I leave the comp idle it goes into screen saver then turns off the monitor after 15 mins. Sometimes, more often than not, I come back and move the mouse and hit a few keys on the keyboard and nothing. The monitor wont come out of standby I try turning it off and back on, and nothing. I have the latest drivers for everything in my system and I checked the power management settings and they both are able to wake the computer up. I have a G15 keyboard and I keep the leds on and when this happens the leds are off and the lazer for the mouse is off too.
View 5 Replies View Relatedi went into my HDD and scheduled an error checking..well windows loaded as normal, but no error checking occurred i guess...now after the green bar is done, the screen hangs on a black screen.
View 7 Replies View RelatedI commonly get a blue screen. So how do I solve this problem 2ndly, whenever I play music on my WMP, the computer may just hang on me, giving all but zzzz buzzes and the whole screen shows lines.
View 4 Replies View RelatedProblem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
Why do I get black picture after I have pressed PrtSc button? Of course it shouldn't be black and it happens only when the screen is on full screen mode (for an example videos, games etc.). It also doesn't matters if I am using just PrtSc or Alt + PrtSc - the result is the same. It looks like this ---> http://img525.imageshack.us/i/blackba.jpg/ (and, no, I didn't painted it black).
View 4 Replies View Related