Print Spooler Crashed
Apr 29, 2008
When installing a printer - at various stages of the process, the installation will fail. Two messages appear:
1) Unable to install printer. Operation could not be completed (error 0x000006be)
2) Spooler subsystem app stopped working and was closed. A problem caused the application to stop working correctly.
Windows will notify you if a solution is available. This computer is running Windows Vista. This issue occurs with SP1 as well. This computer has been re-imaged several times and the issue is still there.
View 4 Replies
ADVERTISEMENT
Mar 23, 2008
In my 64-bit installation, the print spooler server suddenly stopped running (and will not restart). I've tried cleaning out registry keys (HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrint), deleting the files out of Windows (C:WindowsSystem32spool) to no avail. The system log contains many of these:Error Service Control Manager Eventlog Provider7034None The application log contains these:WarningSpoolerSpoolss1035NoneThe print spooler failed to load print provider localspl.dll. This can occur because of system instability or a lack of system resources.ErrorSpoolerSpoolss1027None The system failed to initialize the local print provider: Error 0. This can occur because of system instability or a lack of system resources.
View 4 Replies
View Related
Feb 24, 2009
I was printing fine until one day I got an error that said, Print Spooler not running. I restarted the print spooler and tried again. I got the same message. I have reinstalled drivers and rebooted the system. I still get the same message. I can not add a printer or see the printers that are installed.
View 4 Replies
View Related
Mar 23, 2008
When connecting to network print devices. Printer Spooler crashes repeatedly. This happens on startup occationaly. It happens when running logon scripts. I have tried numerous scripts VBS and BAT files. All of which work 100% on XP boxes. When connecting manually it will load 1 or 2 devices then spooler will fail. I notice that there are 1000's of posts related to this issue. Is there a FIX or Workarount from Microsoft? Vista will never go in my enterprise at this rate...
View 5 Replies
View Related
May 13, 2010
Within the last couple of weeks the print spooler stops. The event viewer shows a message saying "print spooler service entered the stopped state" with an event ID of 7036. It does not display as an error - just as information There are no events on either side of it that are within an hour of the service stopping that shows that something occurred that might have triggered the event. I can restart service without any problem and print to all of the printers. It will stop again within a couple of days.
View 4 Replies
View Related
Mar 23, 2008
I'm having the same problem but with an HP Laserjet 1022. I have reinstalled the LJ 1022 several times, but when you print from Adobe it kicks the spooler out. What you can do is unplug the printer from the computer, reboot and the spooler will come back. Then you reinstall the printer drivers/ software, plug it in when asked for and as long as the user doesn't print an Adobe PDF, the printer won't kick out. I believe this to be an HP issue with their driver that is almost 1yr old.
View 9 Replies
View Related
Feb 16, 2010
I am getting a message saying that the spooler subsystem has stopped working and closed. I have tried manually restarting the spooler but I then get a interactive services message, saying that there is a message that cannot be viewed in windows, I click the view message button and I get a blue screen with a black window then I am told the it does not need to show me the message.
I am running Vista SP2 64bit
AMD athlon 64X2 Dual core processor 6400+ 3.20GHz with 4.00Gb RAM
View 9 Replies
View Related
May 7, 2008
I'm trying to install my Printer Driver for Canon Pixma printer. When I run the executable to install the driver, it come back with "Printer Spooler is not running, Restart Printer Spooler. So I re-start Printer Spooler under Admin. Tools. Then I try to run the executable again. And again the Printer Spooler is stopped. It seems the executable stops the Printer Spooler?
View 5 Replies
View Related
Mar 23, 2008
running vista 64 SP1 RTM cannot print from IE nor print preview unless I turn UAC off in control panel. Cannot print even if opening IE as admin. (some sort of error message about C:/users/username/appdata/local/temp/low/ and some files therein.) Note, on a different machine with vista 32 SP1 beta2 refresh (never got around to installing SP1 RTM on this box) - UAC enabled and no print problem at all
View 5 Replies
View Related
Feb 6, 2009
We have recently got new hardware and upgraded to Vista. We have also just changed to fully networked printing. We are having some printing funnies, but mainly when printing from Excel - no idea why. Here is a selection of the printing problems we have had:
File-Print: Print dialog does not appear
File-Print/Print: Does not print, no printing message
File-Print/Print: Looks like it prints to printer (see printing message), but nothing prints out...........................................................................
View 4 Replies
View Related
Mar 23, 2008
If I try to print from acrobat reader (8.1), (vista home premium) to HP LJ1020, the printer is stuck. I have to remove it from registry and reinstall it. It work fin until I try to print from adobe reader.
View 4 Replies
View Related
Feb 9, 2009
I have spent so much time on this already. I had Lexmark all-in-one X5260 and an old Epson printer installed on my Vista Business Sony Vaio laptop without problem since early 2008. Yesterday I removed the old Epson, with problems, as it had a test print still in the spooler. Since then I have had ???Spooler SubSystem App??? problems and been unable to re-install or print from the Lexmark. I did System Restore back to the day before I removed the Epson printer. I carefully removed the Epson printer. Still no printing with Lexmark. I have followed the recommendations of many of the posts here, especially ???Spooler SubSystem App??? with Alan Morris and Eddie. I uninstalled Lexmark. I followed the procedure recommended in and presumed I deleted the drivers and spoolers.
However I was unable to do the ???net stop spooler??? and ???net stop spooler???. I got the response ???System error 5 has occurred. Access is denied???. In Command Prompt I was not at the root directory, I was at C:UsersVaio. (Vaio is my user name.) I am the only user of this laptop and my printer is plugged into a USB port, not networked. I then tried to install from the Lexmark 5200 Series CD. Before getting to the ???detecting your printer??? phase, I got the Spooler SubSystem App closed error message. Lexmark 5200 now appears in my printers but a test page print or doc print does not work.
View 7 Replies
View Related
Mar 23, 2008
When I printed from adobe reader I got a message spooler problem and it will be closed. I you go to advance option and go to print as a image printing goes fine. So if the printer is stuck go to registry and delete your printer and reinstall printer drivers.
View 0 Replies
View Related
May 20, 2008
I've been printing from various apps without any problems since I purchased my PC in January. I started getting the error message " Thunking Spooler APIS from 32 to 64 process has stopped working" last Friday. It happens when I open Word 2007, and when I try to print in any other app including Notepad.
My OS is Vista 64 Home Premium with SP1. My printer is an Epson DX5050 and I have re-installed the latest drivers from Epson. The only changes I am aware of are various automatic updates which came out last week including Office 2007 SP1. I have tried a restore prior to last weeks updates but no difference.
View 5 Replies
View Related
May 25, 2009
i have plug in my HP laserJet 1010 into my laptop's usb port. I have even download the HP vistax64 driver for this particular printer. But the problem arise when i want to set printing preference for this printer. There will be an error and windows explorer will restart itself. But the problem is the printer can print out my document but do not allow me setup the print. Is it due to the vistax64 driver issue? Is there a workaround like installing the driver for Vista x86 instead? will there be any issue? To add on to my above problem, I get this error "Thunking Spooler APIS from 32 to 64 bit process has stopped working", when i tried to click on properties of the printer.
View 4 Replies
View Related
Jul 29, 2009
This involves my HP Pavilion dv9000t notebook with Vista Ultimate OS, & HP OfficeJet H470wbt (Bluetooth) printer. I am able to install the printer successfully. However, whenever I attempt to print anything I get a window stating: "Spooler Subsystem App stopped working and was closed". This happens both in Bluetooth & USB connection.
I have wasted my time dealing w/ HP support for almost a year. HP says the problem is with my OS. Per their instructions I even performed a complete recovery on my notebook & reinstalled everything back 6 times & my LapTop has been back to HP for warranty work twice. Nothing HP did or recommended has worked. The 1st new printer was returned & I was given a new one in exchange. Still the problem persists.
"Failed Solutions": http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=2093&lc=en&dlc=en&cc=us&product=3434461&lang=en
Removed drivers, re-installed drivers, verified print spooler settings & restart service, restarted the print spooler, temporary workarounds, etc. & nothing has worked.
View 9 Replies
View Related
Mar 23, 2008
I have Windows Vistax64 and recently I have been receiving the above message every time I try to open an Office application, Office 2003 32-bit is installed. If I remove all the printers I don't get this message, but if I add a network printer which has a Vistax64 bit driver I will start getting the error again. This has only been happening this week, maybe after some updates were installed.
View 5 Replies
View Related
Oct 15, 2009
I've a problem trying to print a document with Acrobat on remote MinoltaC353 printer. Windows gives me the following error: "Thunking Spooler APIS from 32 to 64 process has stopped working". I've found an Hotfix but it works only with Service Pack 1 and I'm under SP2.
View 5 Replies
View Related
Sep 8, 2008
I had a problem printing documents - the 'spooler subsystem app' was not functioning properly. So I found this site: You cannot add a printer, and you receive printer spooler error messages, and didn't see the fact that this troubleshooting page was for XP only. So I followed the instructions, and basically ended up deleting nearly all registry files in safe mode except the default ones. When I realized I had messed up, I performed a system restore that I had created immediately before editing the registry files. After the system restore, Vista wouldn't boot. So I restarted and booted in safe mode, got confirmation that the system had been restored, and restarted once again in Vista. Now, I have some annoying problems:
-the start menu freezes. I can click the menu, but i can't click any icons on the start menu itself. -Windows Live OneCare won't start -System restore will not boot. when I start it in the start menu (before start menu freezes), I see in task manager that rstrui.exe (the System restore file) is running as a process, but no application appears. How can i restore my computer?
View 9 Replies
View Related
Mar 31, 2008
Program path: C:Windowssystem32spoolDRIVERSW32X863HPWSPRE0.exe This problem happens because of partial incompatibility with Windows Vista. Please contact the program or device manufacturer(s) for more information. UNQUOTE Job stays in the print queue despite deleting it, and I cannot print
View 4 Replies
View Related
Apr 24, 2008
Hello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.
I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.
I ran a memory test and all was good.
So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.
I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?
View 9 Replies
View Related
Jan 19, 2009
I have a dell Inspiron 1525 with vista home premium and I resently downloaded Last chaos and I tried to play it, and It was fine logging in fine for a couple of seconds and then it crashed. anyone know how to make it work? when it crashes my computer is fine, the screen is fine everything is it simply says, program not responding so i exit out ive uninstalled it and re installed it and run it as an adminstrator nothings working
View 5 Replies
View Related
Aug 9, 2008
my computer crashed and I tried to recover it using a recovery disk.. but suddenly I choosed and click the TOSHIBA recovery wizard.. And there's a 2 option...Recovery of factory Default Software and the 2nd option is Erase the hard disk(delete all the data and partitions from your hard disk) then I took 10 hours of this..then when it finished the process.. I try to restart my laptop then suddenly appears this word with a black screen.. (invalid partition table)
View 6 Replies
View Related
Oct 26, 2007
Everytime i start Photoshop 7 Windows Data execution prevention closes the application with the following message. I am running Windows vista ultimate 64 bit.
View 4 Replies
View Related
May 5, 2008
I find every morning Outlook crashed. Computer is continuously busy (25% of CPU)Rebooting solves the problem, but next morning again crash. Only program running during the night (as far as I can see) is Windows Defender.
View 4 Replies
View Related
Mar 23, 2008
my PC crashed and will not boot, the NTOSKRNL.EXE is missing or corrupt, repair from the DVD does nor fix the problem. I need to reinstall but the only option I get when bootin from the DVD is to "Install from Windows" but Windows will not boot up.What can I do?
View 4 Replies
View Related
Jun 1, 2010
I'm a Vista and IE user, not a Developer. Sequence of events:
last week... downloaded Vista Service Pack 1
this week... IE8 has stopped working... screen goes white... DEP
problem (blocks code execution) or DEP/NX No-Execute Memory
Protection.....................
View 9 Replies
View Related
Aug 1, 2009
I installed vista sp2 yesterday and now my laptop won't start. it offers two options, start in repair mode or start normally. I have an 18 month old Toshiba Equiium running vista home P 32 bit. If I start normally, the microsoft logo comes up and then the screen blips blue momentarily then it goes off. If I run the repair, it scans for faults, then prompts to run a system restore. I take this option and then it takes many minutes to attempt repairs - ultimately ending with 'windows cannot repair..."
there is a log with lots of 0x0 type errors notices (which are meaningles to me) I can't even get to the point where I could elect to restore to last best save or whatever. I have all my docs backed up on a portable HD but I cannot get past this failed repair message.
View 9 Replies
View Related
Mar 31, 2009
Recently, my Vista x32 crashed. I deleted it and put on Windows XP. (This was three days ago) I now wish to go back to Vista, as I didn't expect this and never planned to turn to XP. A vista CD did not come with my laptop, but I have a serial. My friend had Vista and when he installed it, it would only be compliant with the serial number it came with. Is there any way to recover my Vista?
View 9 Replies
View Related
Sep 12, 2009
Yesterday I was playing a game, and it just pixelated my screen and crashed. I restarted my Vista system, and it couldn't reboot. I reinstalled a fresh version of Windows 7 thinking it might help out. Everything is okay, I run 1280x800 without the drivers for the video but once I install NVIDIA Drivers, it crashes. I can't play any games this way.
View 4 Replies
View Related
Feb 23, 2010
My Laptop was taking about 8-9 mins on average to boot. But Runs Great once running. also shut down was 4-5 mins. I tried Defrag, CCleaner Defrag Registry, Registry Cleanup,enable both cpu's at start up,ran Avanquest's System Suite Utilities, Chkdsk/f /r,also sfc /scannow.so reading on some forums, a lot of advice was to update all drivers. So I got Driver Genius Pro 9 by avanquest (Driversoft company when installed)this program found 22 drivers out of date. so I created a restore Point and did a full registry export(backup).next, I let all the drivers completely download, then First, I installed Intel turbo memory drivers,everything was functioning well, so I proceeded to install Intel chipset device software.
3rd was the Nvidia Display Drivers so I made a second Restore point (I had issues in the past with display drivers) So I installed the Nvidia drivers and on reboot I input my password and it says The User Profile Service service failed the logon. User Profile cannot be loaded. I tried to run Restore but it says Disk OS(C) has errors(Windows detected file system corruption on OS(C). you must check the disk for errors before it can be restored. checking disk OS (C) - Some Problems were found and fixed. But at reboot - same issue. so I went to vista forums."Brink" had some great advice I used that I found in a thread, to turn on the "Real" administrator account in safe mode to gain access and I uninstalled the Nvidia drivers under the admin acct. at reboot states corrupt system files (CheckDisk) But when I tried to run driver Genius in admin again to reverse the intel drivers (this shows up as Intel Matrix Storage Manager in Start>Programs) the PC crashed.
I ran CHKDSK /f .NOW I can boot into my acct. but there is NO sound device found, sidebar gadget shows no battery,or battery activity.Also bluetooth Hardware not functioning. The Drivers for bluetooth and sound show "Functioning" in device manager. Someone HELP Please as I spent many many months customizing and lots of money on software that will be lost. It seems to be fixable but HOW?
View 6 Replies
View Related
