My Laptop was taking about 8-9 mins on average to boot. But Runs Great once running. also shut down was 4-5 mins. I tried Defrag, CCleaner Defrag Registry, Registry Cleanup,enable both cpu's at start up,ran Avanquest's System Suite Utilities, Chkdsk/f /r,also sfc /scannow.so reading on some forums, a lot of advice was to update all drivers. So I got Driver Genius Pro 9 by avanquest (Driversoft company when installed)this program found 22 drivers out of date. so I created a restore Point and did a full registry export(backup).next, I let all the drivers completely download, then First, I installed Intel turbo memory drivers,everything was functioning well, so I proceeded to install Intel chipset device software.
3rd was the Nvidia Display Drivers so I made a second Restore point (I had issues in the past with display drivers) So I installed the Nvidia drivers and on reboot I input my password and it says The User Profile Service service failed the logon. User Profile cannot be loaded. I tried to run Restore but it says Disk OS(C) has errors(Windows detected file system corruption on OS(C). you must check the disk for errors before it can be restored. checking disk OS (C) - Some Problems were found and fixed. But at reboot - same issue. so I went to vista forums."Brink" had some great advice I used that I found in a thread, to turn on the "Real" administrator account in safe mode to gain access and I uninstalled the Nvidia drivers under the admin acct. at reboot states corrupt system files (CheckDisk) But when I tried to run driver Genius in admin again to reverse the intel drivers (this shows up as Intel Matrix Storage Manager in Start>Programs) the PC crashed.
I ran CHKDSK /f .NOW I can boot into my acct. but there is NO sound device found, sidebar gadget shows no battery,or battery activity.Also bluetooth Hardware not functioning. The Drivers for bluetooth and sound show "Functioning" in device manager. Someone HELP Please as I spent many many months customizing and lots of money on software that will be lost. It seems to be fixable but HOW?
After two days of trying to recover my vista installation I've got a new version of vista and it it's still telling me i've got missing or corrupt files. Where can get the correct files/ a good recovery disk/ a bootable virus cd (tried bit defender - didn't work). I've read soooo many pages about this and nothing works. Startup repair - doesn't work; complete system recovery - doesn't work; formatting during the vista installation - doesn't work.
Recently I have had three files turn sour on me for no visible reason (corrupt). One of them is a very imporant bit of course work. Im running office 2007 and 32bit vista home. I have been storing the files on a USB stick I thing there may be someing wrong with the usb stick I have now changed it but this dose not solve my problem of the lost files.
I have tried downloading various recovery programs none of which have worked. I have also downloaded open office and that will not open the files either. I don't know where to go from here. If someone can send me back the "energy survey" in working order im willing to send them £5 via PayPal. Only 2 the first person.
found corrupt files when I ranAttachment 6215 sfc /scannow Also found the same thing when i went to use vista glazz to patch upAttachment 6216 and I cant provide the cbs log that scannow provided me, b/c I don't know what info is relevant
the Admin went corrupt. I cannot retrieve any files. How do I get in..? Im the admin holder, I am writng this on the other have of this unit. HP wants a fee to correct this, The store I bought this from does Not supply any discs for this unit
my problem is im constantly being told that i have curropt files it starts when i start windows continues in windows and even when i shut down. ive tried to run chkdsk but it wont run at all. right now im doing rfc /checknow but it stops at 25%.
I am getting messages to run a chkdsk for 3 different corrupt files. I was unable to run chkdsk. I followed all details I found on this website, but I dont have Session Manager under hkey_local_machine/system/currentcontrolset/control. I also tried to download the .reg, but no option to merge. I also lost all sound. It seems like problems just keep getting worse and more things are not working.
just got a Acer Aspire 6935G, few months old, no previous problems. just ran sfc to check the system files and windows resource protection found corrupt files but was unable to fix them. the trouble is i cant access the CBS.log file to see the violation/s. keeps saying access denied, i have tried changing the file permissions for my user account (ADMINISTRATOR ACCOUNT) to full control but still i get access denied. should i take ownership?
I've had a Dell XPS M1210 for about 15 months. I am running Vista Ultimate on it, now with SP1, before the RC1. Several times, I've had problems with files getting corrupt (about every month), which have made program being non-working. I also have problems with the wireless networking, but that's another problem...
I fixed the files with chkdsk and that sometimes solved it. I can't remember all files, but it has been the login, photoshop, office, logitech cam e.g. I couldn't even start up the computer without getting the message - file corrupt, run chkdsk several times. Luckily, the RC1 solved everything. Unfortunately, I had to uninstall it to install SP1 and that time everything crashed.
Now I have used the Dell restore to get the computer running (in April). Everything worked fine, but now I have gotten the files corrupt messages twice. Chkdsk has fixed it, everything seems to work ok. But I think it is only a matter of time before there will be more problems. Running the sfc/scannow shows there are some corrupt windows files. Anyway, I called Dell about this and they recommend me doing a clean install from CDs instead of their image on my computer. I doubt that this will work. The only thing is that this will take an enormous amount of time (since I have to install Adobe CS3, Office, etc), even though they claim it is quick. Their support is pure BS, IMO.
Could someone with Windows Vista SP2 check MSINFO32 (6.0.6002.18005) to see if it's generating .nfo file properly? Open msinfo32, save .nfo file and try opening it.
Hello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.
I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.
I ran a memory test and all was good.
So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.
I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?
I have a dell Inspiron 1525 with vista home premium and I resently downloaded Last chaos and I tried to play it, and It was fine logging in fine for a couple of seconds and then it crashed. anyone know how to make it work? when it crashes my computer is fine, the screen is fine everything is it simply says, program not responding so i exit out ive uninstalled it and re installed it and run it as an adminstrator nothings working
my computer crashed and I tried to recover it using a recovery disk.. but suddenly I choosed and click the TOSHIBA recovery wizard.. And there's a 2 option...Recovery of factory Default Software and the 2nd option is Erase the hard disk(delete all the data and partitions from your hard disk) then I took 10 hours of this..then when it finished the process.. I try to restart my laptop then suddenly appears this word with a black screen.. (invalid partition table)
Everytime i start Photoshop 7 Windows Data execution prevention closes the application with the following message. I am running Windows vista ultimate 64 bit.
I find every morning Outlook crashed. Computer is continuously busy (25% of CPU)Rebooting solves the problem, but next morning again crash. Only program running during the night (as far as I can see) is Windows Defender.
my PC crashed and will not boot, the NTOSKRNL.EXE is missing or corrupt, repair from the DVD does nor fix the problem. I need to reinstall but the only option I get when bootin from the DVD is to "Install from Windows" but Windows will not boot up.What can I do?
I turn on my computer and it tells me that my c drive is corrupt and to run chkdsk.
I go into command prompt (right clicking on it to run it as an admin) and run the command sfc /scannow.
It says that it's starting the system scan and that it will take some time, but as it's getting it's "Verification" it stops at 9 percent complete and says that "Windows Resource Protection could not perform the requested operation."
I've also tried going in through computer>right click>properties>tools>error-checking>check now and then clicking both check-boxes >start>schedule disk check and then I've tried restarting, but nothing happened.
I have a problem with my PC with windows updates. When I turn the computer on in the morning it starts installing new updates. this takes about 35 minutes on stage 1 of 3 then it shuts down. When it restarts again I get a tech guys message to say "Your computer was unable to start. Running start-up repair" At the end of this when I look at the diagnosis it says: Boot critical file C: toskrnl.exe is corrupt Repair Action: File repair Result! failed error code OxA Time taken = 4462ms Repair action: System restore Result: Completed successfully Error code = OXO. This is now happening every time I restart my computer and it takes about an hour. Windows then starts OK until the next time Do I need to reinstall windows Vista Home Premium??? It was already installed on the PC when I bought it and they did not give me a CD.
I downloaded the lastest updates for Vista, upon reboot, got the following error Boot Critical file: C......Tcpip.sys is corrupt. Will not boot at all, even in safe mode. Inserted my DVD and attempted a "repair", it failed on TCPIP.sys and said there it was not able to complete the repair.
just re-booted my pc got error pfn list corrupt am i right in thinking this is ram or hard drive related i did run memtest for 16 hours then stopped it thought it was playing up thats why it was running so long or does it run that long i have 2 gig of ram vista intel quad core 6600 2.40 ghz. 64 bit operating system memtest did show some error but how reliable is it.
I have a flashing power LED on my WRT54GP2 I have read in to this and it tells me that this is due to the firmware is corrupt but how do I refresh the firmware(I am finding it hard to find any WRT54GP2 firmware on the linksys website)?? This is not a ISP WRT54GP2, I brought it myself. [EDIT] so I have found some firmware but now Im struggling to get to the setup screen. I put in 192.168.15.1 which is the webbased setup no joy is there anyother way of getting the firmware on there?
I've been having some trouble with my installation of Vista today. It had been running without a hitch for nearly a year. I think the problem started since Windows was taking a long time to shut down, I assumed (wrongly perhaps) that it had frozen, and so I forced it to shutdown by holding the power button for 5 seconds. Another possible cause could be I plugged in a USB joystick (driver conflict?).
When I started my PC back up I noticed things seemed to be running very slowly at times, as if the system was having trouble accessing some files. I scheduled a Disk Check and restarted. It found and fixed some errors, brought me into my desktop, and then a pop up kept appearing in the bottom right tool bar saying '*.exe could not be accessed' and something about a folder named '$Secure'. My browser bookmarks wouldn't load, for example. I restarted again and this time during startup the green loading bar would run its course, and then a black screen and a cursor appeared, rather than the Vista logon screen. I booted off my Vista DVD and ran Startup Repair. It found and fixed some errors but I still have the black screen problem. I also ran another Disk Check, as well as some HDD diagnostic software - it said everything was fine. When I try running Startup Repair again, it tells me it doesn't see any errors and to remove any recently added hardware (I have). I'm stuck at this point. I would like to repair (upgrade) my installation of Vista, but I need to be able to get into a working install in the first place to do that.
I'm a Vista and IE user, not a Developer. Sequence of events:
last week... downloaded Vista Service Pack 1 this week... IE8 has stopped working... screen goes white... DEP problem (blocks code execution) or DEP/NX No-Execute Memory Protection.....................
I installed vista sp2 yesterday and now my laptop won't start. it offers two options, start in repair mode or start normally. I have an 18 month old Toshiba Equiium running vista home P 32 bit. If I start normally, the microsoft logo comes up and then the screen blips blue momentarily then it goes off. If I run the repair, it scans for faults, then prompts to run a system restore. I take this option and then it takes many minutes to attempt repairs - ultimately ending with 'windows cannot repair..."
there is a log with lots of 0x0 type errors notices (which are meaningles to me) I can't even get to the point where I could elect to restore to last best save or whatever. I have all my docs backed up on a portable HD but I cannot get past this failed repair message.
Recently, my Vista x32 crashed. I deleted it and put on Windows XP. (This was three days ago) I now wish to go back to Vista, as I didn't expect this and never planned to turn to XP. A vista CD did not come with my laptop, but I have a serial. My friend had Vista and when he installed it, it would only be compliant with the serial number it came with. Is there any way to recover my Vista?
Yesterday I was playing a game, and it just pixelated my screen and crashed. I restarted my Vista system, and it couldn't reboot. I reinstalled a fresh version of Windows 7 thinking it might help out. Everything is okay, I run 1280x800 without the drivers for the video but once I install NVIDIA Drivers, it crashes. I can't play any games this way.
I have a gateway MT3422 that I have had for 2 years and it came with vista. I have had to restore my computer once since I have had it and never had any serious problems with it. 3 months ago, my computer was trying to install SP1 and when the computer restarts, it goes to a blue screen, then into a black screen and it says "error, calling phyllat. can not find operating system" and it locks up. I push ALT+CTRL+DEL to reset it and it reboots and says the upgrade did not install and gives me the option to reinstall it. After 3 months of trying, I gave up and ignored my computer to download and install the service pack.
Then one day, it actually installed SP1 and when it restarted, it said "error, do you wish to launch system restore (recommended)" I did and it went to a black screen for 4 hours - no cpu or aything running or eve the blue cpu light to show its running. No fan on, no noise from the processor. I shut my computer off and it doesnt ever go to the windows vista loading screen.
Ive tried to boot in safe mode and it gets hung up on system/windows32.....drv and never goes any further and gets caught in a loop. I pushed f8 to launch the repair mode, and it gets caught in a loop. I put i my restore disc that came with my laptop and when I ask it to install windows vista, it gets caught in a loop. tried to do a system restore and it cant because my C drive is corrupted.
I have 3 VB machines running IE8. All worked fine until today, where nobody can open the IE8 app. The one XP machine in the office is working fine on IE8, and the Windows SBS 2008 machine we have is running fine on IE7. We did emergency Firefox installs, and this is what we are using now to do browsing. It looks like the program is trying to open, but just doesn't. The only update installed yesterday was a definition update for Windows defender, although since then I have installed SP2 on my machine to see if it cures.
My hard drive crashed, so i bought a new one but when i try to run the recovery dvd disc, as soon as i click start it says Error 100a if problem persists contact hp. i called them and they're telling me i now need to get a new recovery disc, but i dont think they know what they're talking about and im sure they will just tell me i need to buy something else when that doesnt work
I've had windows vista on my laptop for over a year (it came with it) and it's pretty slick and clean looking but why isn't it compatible with a lot of software! like for instance, the window's chess game...worked twice then never worked again...always gives the "executable for chess game has stopped working". I gave up on that. another one, iTunes...has numerous problems in running. Now, I've just recently gotten the sims 2 deluxe and it was running okay but now I've gotten an expansion pack for it and the game works okay once after installation then will no open again and gives me an error.
"The application has crashed and will now terminate" I've tried absolutely everything (and making sure my games and applications meet the system requirements, and they do, running it in compatibility mode, updating my sims games which open for business update will not update after installing it once. It works if i install it immediately after I install OFB..but even then so, it crashes after one time playing the game!).......
