This is Windows Vista SP1 (Build 6001) , 32bit, Dell Inspiron 1525. The desktop does not boot. There's no taskbar, no icons, no background. There's no task manager with ctrl-alt-del, nor any kind of response from touching any key. Just a mouse pointer (the mouse pointer DOES respond to the touchpad, but does NOT respond to any right- or left-clicking) on a dark blue screen (not BSOD color). I've tried booting in safe-mode, safe-mode with networking, and safe-mode with command prompt. They all have the same response. The only difference safe-mode does (different than normal mode) is that it displays across the top "Microsoft (R) Windows (R) (Build 6001: Service Pack 1)" and it says safe-mode in all four corners, on a black screen.
I'm sorry I can't give any more information, but I can't get anything else out of the laptop. I don't know if there was anything recently installed or updated (I wasn't using it, my wife was, and she knows so little about computers that she's unsure if she was installing anything, or if windows was updating)
I shut my desktop off just now and was getting ready to go to bed but realized that I had forgotten to do something that I needed to do. So I go back to my PC and power it back on (good 5 minute gap in between power down and start up) to find that after the initial Windows boot logo it froze and would not proceed to my log in screen. I restarted my PC and tried again with the same results, from there I booted with Safe Mode... While going through the loading drivers list, the system froze up on "crcdisk.sys" and refused to go any further. I rebooted and tried again with the same results, however I let the system sit there for about 5 minutes this time and after awhile it restarted by itself and booted Windows normally. I don't want to shut me PC off again to say the least... Unless someone knows what's going on here...
i have a problem when vista is booting up past the loading bar screen sometimes not always the system kinda hangs when about to boot into desktop?, a mouse pointer appears and the screen is black for about 30-45 seconds then the vista circle icon appears then desktop loads? is this a known problem or just my system?
I have vista home premium The first time i turn on my comp each day vista freezes on desktop screen. I reboot and it fine. I looked in event viewer and the error which is happening when it freezes is to do with ACPI
Error message:IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 7, function 0. Please contact your system vendor for technical assistance. IRQARB: ACPI BIOS does not contain an IRQ for the device in PCI slot 6, function 0.
I am running Vista 64 Home premium. When I boot my system and reach the desktop, all my desktop icons are present and accounted for. Then, all of a sudden they will refresh. It's fairly quick when it happens, but is this normal? It happens on every boot. I have thirteen desktop icons counting the recycle bin. Can someone at least tell me if their Vista 64 OS does the same?
I recently bought a new Vista computer and after a few hours, it wouldn't boot all the way. It drew the desktop background but did nothing else. It was showing the mouse pointer, and Task Manager said only about 5 processes were running, including the desktop manager. It was not the first time I had booted it up. I wound up totally exchanging the whole computer. What would cause this to happen and what could you do to try to fix it - safe mode?
I'm not sure where this goes but i was wondering what would give my system the best performance after a reinstall. Boot Or From Desktop I have Windows Vista Ultimate 32&64bit. Going to install 64Bit. Whats the Best Reinstallation Method
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run Press F11 to boot menu Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
I can't get it to work. I tried running as administrator and no luck. I have a Asus G2 series gaming laptop-OS Vista Home premium 32 bit. The game installed great, but as soon as I click on the shortcut from the desktop it will flicker a black screen and just return me to my desktop. I tried putting my computer in a 800x600 resolustion and still didn't start it.
I want to rename /Desktop/Linux_Mag_Bugs.eml to /Desktop/Bugs.txt A right click on the icon does not give me the opportunity to change the suffix. Question: How can you change a file suffix?
I just cleared my desktop because it was absolutely cluttered with icons and stuff, but now it's like the Icons are part of the wallpaper, because I can't click on them, can't drag them, and if I drag a different icon over it it's still there underneath the other one.
I've been trying to set up a remote desktop connection between my laptop and my desktop both running on Vista Home Premium. Why does this error come up:
"This computer can't connect to the remote computer."
when they are both connected (wirelessly) via the same network.
I don't find the desktop to be of much use, too many icons take away from the image I choose to display, but I do use the desktop toolbar from the taskbar quite a bit. There are icons that I cannot remove from the desktop toolbar such as the Network & Control Panel icons they won’t leave the toolbar, and I can’t seem to kill the IE icon off for good, either.
I have rebooted my Laptop normally, I logged into Windows Vista and i was surprised by having the Desktop background disappeared along with it's Icons. The programs work fine... I tried choosing a picture and setting it to a desktop background. Still nothing. I terminated explorer.exe, The desktop background appeared. but since i terminated it, the taskbar and icons are gone. I Can't right click on the desktop, and when i move the cursor inside it, it's still "loading" for ever.
i can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
I have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD Status: 0xc000000f Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
I was working on the computer today using several programs and when I went back to the desktop, I noticed a sort of ghosted out icon that looks like a gear on top of a sheet of lined paper and the words "desktop.ini" under it. I have no idea how it got there. Is it safe for me to delete it or is there a better way of getting rid of it.
Vista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
I have more or less completed all the driver upgrades and windows updates but I keep getting repeated boot failures of Vista. I can always get into Safe mode but in Normal mode the boot fails just after the first spash screen at the point when the screen goes blank to be replaced by the small circular Vista logo. After 2 or 3 attempts it succeeds to load but then the problem seems to reoccur, particularly when I have been back to XP for a while.
I had a similar problem with XP but that seems to have sorted itself out. I have tired looking in the logs for faults and failures but no clues there. I am running an ASUS P5E MB with Intel Quad 6600, 4Gig RAM, GeForce 8800GT and 2x250Gig HDs.
This is the best install I have ever done (or was)…I did a fresh install and followed a tweak which was to very enlightening, to say the least. From there I have been to a few other sites and moved on to fully customizing my desktop/login and……well…this is where I stuffed up…My BOOT screen no longer works properly, even with the original “winload.exe.mui” file replaced.
I downloaded and used “Vista Boot Logo Generator” I loved the results on my last install…It worked well. Upon deciding to do a fresh install with Tweaking in mind, I simply coppied over a Boot logo I made previously after allowing permissions and all that as well as changing the NO GUI in msconfig…ect….BUT......
i am new to this forum but i have problem with my system bootup. my system takes too long to boot and it started 3days ago. it takes about 120secs at bootscreen alone. i believe it is not my start up programs as it takes about 3 secs to start up from login page. i donot use any third party bootscreen. normally, my system boots in 30 secs but now i am facing a lot of problem which i do not understand. i have tried all the tutorials in this forum relating to bootup problems but found no luck.
XP is on 1st primary partition [active] and is old. Vista is on 2nd Primary partition and is new. Dual boot info, I believe, is all on the XP partition. Soon I will want to go to Vista only. Do I just delete the XP partition (after imaging it, of course!) and set Vista partition to active? (Paragon Partition Manager). Will it then automatically boot into Vista (which has no boot.ini)?
I've had Vista x64 installed for about 2 full months now and I've recently begun having a lot of problems. One being: 187 seconds. What the hell? Before you ask, here are my specs. Lots of fast memory, a fast processor, 7200RPM boot drive (not listed), and ****ing awful performance. What gets me is that the delayed boot time is before I even see the "Welcome" screen.
My current boot time distribution: 1. BIOS does all its fancy stuff very quickly (about 6-7 seconds or so) 2. I get to my boot loader and it defaults to Vista after 5 seconds (dual-booting Vista/Ubuntu). 3. I then see the Vista loading screen (black screen with green loading bar) for about 4-5 seconds................
hp tool ask to do this "Then please go to “using DOS system files” column and add the link to where you stored the unzipped DOS boot up files. "so my question is , where can i get the "dos boot up files" for vista64? with the hp tool i need to locate the dos boot file address . so how do i do that? do i have to download vista64 boot files? every google links explains how to do this with xp. couldnt find any for vista. makes me feel like im the only person on the planet using vista.
I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed. I don't have Vista's DVD, and I'm trying to avoid installing XP again. If there's any way around...I would be gratefull! (Is there any way I can edit bcdedit.exe in XP?)
I was running dual boot fine between XP and Vista now im running both Vista it only reads my newly installed drive on boot and i have no boot options as you do in XP/Vista installs, im a newbie to dual drives and was wondering how to set it to have boot options now!
I searched all over the internet for this simple (I think) problem, but I couldn't find any solutions. I have installed Vista on my C: disk. After that I installed XP on D: disk. Now I can't boot Vista anymore. I tried with boot.ini. I've read that there's a program called bcdedit.exe. I tried to make that one work on XP, but I failed.
