After I shared my C drive on a network it was working fine. I then unshared it but something went wrong and said the hard drive would be in a mixed state if i didn't continue the operation fully. i ignored it(idiot) and carried on. but now i cant access my C drive directly but i can access my documents. i was thinking i would just system restore it but i cant even access that and i cant back up my files either. but i can access them. I have tried changing permissions in the security tab of c drive but it wont let me stating that access is denied and i have tried to enable the guest account but it wont even open up the window to do so.
I have a usb drive that is from ubuntu (Linux) & would like to access it from vista but i get access not permitted. So tried to change the properties so everyone can access the files. See the current owner is Unix user 501. I tried to change with administration privileges but the unix files will not let me.
Vista Home Premium will not allow me to acces the applications/my Pictures folder, i get an access denied message, how do I get around this, or save screenshots to a different location?
I want to add a destination to my sendto thingie. I get the message that I don't have permission to access this folder (I am the administrator and the sole user of this computer) and to edit Security in Windows and then I am told that I have to use the Security Tab. What/where is the security tab and what do I do there once I get there?
There is only one account and it is my own. However on more than one occasion and, as a matter of fact, just now; when I log on there are two of me at the logon screen. Just two identical logons. Is this another profile the is a shadow or double of my login that runs at the same time. I can choose either to logon on to and they both are identical with identical passwords, etc.. Once I log on I can't switch user and see the profile again. What is this?
I have recently bought a new laptop which runs Vista Business, the problem I am getting is with Access. With my work I use Access databases which have the following files (please be aware I am an absolute novice when it comes to Access I literally fill in the blanks) "rpt.mdb" and "rpt_be.mdb". To start the database I double click rpt.mdb to bring up the front end of my report writing software. When I do this now the screen I usually get isn't complete and I can't access any data or input anything. The files were originally created in Access 2003 and they don't seemed to have converted over well.
Im the admin on my PC. There is a limited user account. I want to set permissions for certain folders such that they cannot 'cut' or 'delete' the files. Please help me with the settings. I have tried rightclick>>Security but i dont know to proceed further.
I know there are several threads like this on the vista forums, but the postmaster recommended a new thread so i am kindly obliging. I have the same ****ty problem many before me have had. One peeerty day I turned on my Vista comp, and all of a sudden my wireless connection had stopped working. Limited or no connectivity was the message I got. So I fired up my notebook, running with XP - same thing. Limited or no connectivity. Only when I did diagnose problem on my XP it did precisely that. and the problem was gone............
I have 2 laptops that are running Vista and get this message numerious times. I also have 2 Windows XP pc's on the same network. Why do the Vista pc's keep having this issue. My Linksys wireless router is setup with no restictions so I can get this problem fixed.
I'm on Vista Ultimate x32. I connect to my internet wirelessly using a Linksys USB adapter. When I'm downloading something my internet stops working, downloads top and it says limited or no connectivity - so I have to disconnect from the network, unplug the USB Adapter and then re-plug it in and then it connects.
My Packard Bell EasyNote MX37-U-05 (Running Vista Home premium) was working fne on a wireless network through a BT Wireless home hub. It did automatic updates and since then has connection problem reporting "limited Connectivity" what does this mean and how can I cure this problem? It seems to be the same if I connect through the Wireless or direct on the hub Lan connection.
I have an old machine running Win2K and a new laptop running Vista. Both machines are in a workgroup. The Vista machine can see itself, the Win2K machine and the router. owever, the Win2K machine can see only itself. Can someone tell me if Microsoft did this purposely to encourage people to migrate to Vista? Everything seems to be configured properly. If someone can tell me how to check out things thoroughly,
I m trying to resolve limited internet connectivity via ICS. My Vista 64bit Ultimate notebook connects directly to a wireless network, from which it gets internet connectivity. I can visit any webpage and see all network devices, so things seem to be working great on the server side.
My other computer, the ICS client, runs 32bit XP pro and is set up to connect to the internet through my notebook. Between the two PCs is a spare buffalo WHR-HP-G54. I can see all network devices, but it fails to connect to most websites. It will display Google and *some* pages from Time Warner Cable, but I cannot get to Wiki pages, my favorite forums, or download updates for anything on my desktop PC. Based on the status bar of my browser, which usually gets as far as "Transferring data from ", it seems the communication problem is limited to incoming streams........
I don't fully understand the use of an extended desktop - when I extend my desktop on the external monitor all I get is the background picture from my desktop...can i get anything else on this, am I just being simple? (mirrored monitors works fine)
I sucessfully loaded software and when I attempt to run it I get the msg that says that I am logged on as a limited user. In order for me to have access to all SonicStage functions I must log on to an account that has Administrator or Power User Privileges.
Dell laptop Inspiron 1545, WRT54GS - "Connected With Limited Access" - drove me up the wall. Tried everything. Browsed other forums for hours. What did I do? Just for grins, and for NO particular reason, I switched from WEP to WPA Personal / TKIP in the router and to WPA / TKIP in the laptop and other PC, entered the ten-char key I've always used, and POOF - instant connection.
Well basically last night my internet was running fine and when i woke up to turn it on i got Unidentifed Network - Limited Connectivity, I'm using my laptop's connection which is the same connection way as the other computer so i'm guessing there is somthing wrong with the desktop
About 3 days ago I was downloading a file when I noticed the download had stopped half-way through. Thinking the router had frozen I unplugged the router to reset it, as I have done a hundred times before with no problem. After restarting the router Vista (Home Premium 32-bit SP1) stopped recognizing my home network (wired) and I started receiving a "Limited Connectivity" message. When I go into the Network & Sharing screen I see "Unknown Network". When I boot this same computer into Ubuntu (7.10) I can access my network and the internet. I also have a small Ubuntu server and Xbox 360 that can access the network just fine. This is definitely a Vista issue. After trying many, many suggestions (Unplug router, Reset router, IP refresh,...) from around the internet with no success, I purchased a new PCI Ethernet card (Netgear GA311) just to rule out a possible hardware issue. I unistalled the onboard lan in Vista and disabled it in the BIOS then installed the new card. No Luck, Same Problem. My router is a Netgear FWG114P. I have had this network for over a year with no issues and now, out of the blue, nothing. I tried re-entering the IP, Subnet, Default Gateway and DNS addresses for the ethernet adapter, NO LUCK. I did notice a strange issue when I ran "Ipconfig /all" The default gateway was shown as "0.0.0.0". After re-entering the gateway address, the gateway was listed as "0.0.0.0" with my gateway address listed below.
I downloaded some new Mac fonts and I want to change the default font in Vista to one of them. I can't do that via Appearance>Advanced, because there's a limited variety of fonts to choose from.
I am one of the many users experiencing problems with wireless connections that work until your laptop goes into powersave mode, then only allow "Limited or No Connectivity" I have 2 wireless routers, a Linksys and ActionTec, supplied by Verizon with FiOS and Linksys has helped me a couple of times to make it work but that is all. Verizon is clueless. As am I since I have 4 XP laptops that all work. Vista is apparently trying to prevent me from hurting myself, and therefore I am unable to fix it.
This problem is driving me up a wall. I try to connect, and I get a "Connected with Limited Access" or "Limited Connectivity" error.I have a NETGEAR_WPN284v3 and I'm on Vista.
I've my friend who share my connection of 2mb/s. Problem is when he download GBs of stuff my speed comes to an end . Is there anyway I can allocate him limited speed say 20kb/s through my router? My router is Linksys Wireless-G ADSL Home Gateway WAG200G. There is no option for this inside the router settings.
After upgrading Vista Ultimate to SP1 two days ago, I noticed on the Taskbar that I'm getting a yellow Caution symbol on top of the Network Icon. My internet connection seems to be working correctly. I've tried resetting my Linksys router, removed and reinstalled Norton Internet Security 2008, upgraded my NIC drivers, (I'm using an ASUS P5K Deluxe motherboard with built-in networking.), tried the Network repair options, etc.
I'm facing problems with my internet connection in my vista. I'm trying to connect internet thro usb cable of my mobile as i've taken subscription of mobile connect. It used to work fine but now it shows as limited connectivity. In pc suite it shows as connected but cant connect to internet. I've tried all best possible options to check the connectivity.
One new computer using Vista Home. Installed wireless network card and ran software. Found and established connection to wireless network in the office. Then....I setup the network to be secured, connected with a Win XP computer with no problems using the correct key. Did the same process with the Vista computer, found the network, asked for key, entered correct key and have limited connection. Reset everything on network. Switched back to unsecured and hooked right up. Disabled firewall, the only thing running is McAfee Total Protection, no firewalls.
Got a new laptop (VISTA) and already have a wireless router (netgear) in the house. We connected the laptop wirelessly with no problems yesterday and this morning. Then, out of the blue, I get a "limited connectivity" message even though the signal strength is excellent. Our wireless network is the only one that's listed "connect automatically" and we were connected to it yesterday and this morning with no problems.
I have 2 computers at home both running XP SP2. One plugs directly into my Netgear router and the other is wireless. I recently bought a laptop withe Vista Home Premium. I was able to connect to the network before, but I think I accident;y changed something. It is now showing my network as a public network. It continually says "Identifying. Public Network)" in the Network and Sharing Center. Access is Limited connectivity. Also I am NOT able to access the Customize link in the NaS Center like I was before.
I am going crazy trying in Vista to execute a simple search for a string of text in all files of a particular type, something I used to do very often in earlier versions of Windows! It appears that to do this I have to:
(a) first type in the file type (eg *.doc) and wait for that to deliver results. (b) then type in the search string and click on "Search in File Contents" to trigger a second search and even then the second search ignores the file type and searches for the string in ALL files types in the given folder........
i have a netgear wireless router, one desktop pc connected to it with a Ethernet cable (still working fine) and a hp laptop running vista connected thought wireless everything was working fine until one day the wireless on the laptop just stopped working and gave the message connected with limited access i have disconnected from the network and tried to reconnect however all i get is connection unsuccessful then i go to diagnose the problem and have been given some suggestions by windows help i have checked my driver and they are all up to date i have also checked that both ipv4 and ipv6 protocols are ticked in the config for wireless networking, my adapter says working fine and i have checked that my WEP keys are still the same.
I need an norton internet security 2007 10.2.0.30 serial number and an office 2007 12.0.4518.1014 .. i got a new toshiba a200 but all this comes in a limited license.
I just installed an OEM windows vista home premium onto my computer so that I could take advantage of my 6GB ram. Unfortunately I don't know too much about building systems and I have an internet problem. After I installed the OS, when I plug my computer into my router, I always recieve "unidentified network..limited or no connectivity". I've done everything that the internet company has asked me to do as far as my modem/router is concerned, and Acer wants to charge me a buttload for their help.
Am I missing something simple that I need to do with my 64 bit software? I downloaded the 64 bit drivers for my LAN, audio etc from the acer website but it seems to still do no good. I even downloaded the driver directly from my Lan ethernet controllers brand website. I've been stuck here for days without much help and the wierd thing is that my girlfriend can plug her computer (32 bit vista home premium) right into the router and it connects fine. I'm downloading SP2 now if that makes any difference.
