I get this error...Your IMAP command could not be sent to the server due to non-network errors. This could for example indicate a lack of memory on your system. How do I find out if it is a lack of memory issue? How do I resolve this?
View 5 RepliesI am tying to set up Microsoft 2007 e-mail for my Sky.com e-mail account but am receiving the error message "Your IMAP command could not be sent to the server due to non-network errors." It states as a suggestion that this could be due to lack of memory space however this is a new PC with nothing but office and norton anti-virus installed so this is a doubful reason.
View 7 Replies View RelatedWhen attempting to download my folders from imap.googlemail.com I get the following message: Your imap command could not be sent to server due to non-network errors. This could for example indicate a lack of memory on your system. What, if anything, can I do? I really would like to get this Windows Mail working
View 6 Replies View RelatedI was trying to set up windows mail for the first time, al was going well then I got the following message,
Host IMAP cold not be found, please verify that you have entered the server name correctly. Your IMAP command could not be sent to the server, due to non - network errors.This could, for example, indicate a lack of memory on your system.
Incoming mail is set to IMAP (imap.aol.com)
Outgoinh mail is set to SMTP (smtp.aol.com)
I get the following error message when trying to send an AOL email through Windows mail: XAOL-UAS-MB authentication failed. None of the authentication methods supported by your IMAP server (if any) are supported on this computer. Account: 'imap.aol.com', Server: 'imap.aol.com', Protocol: IMAP, Server Response: 'Your IMAP command could not be sent to the server, due to non-network errors. This could, for example, indicate a lack of memory on your system.', Port: 143, Secure(SSL): No, Error Number: 0x800CCCDF
I am having trouble sending my e-mail messages it askes me the name of servers - incoming and outgoing names. (ex. POP or IMAP.......) I am using aol. Does anyone know what the aol incoming and outgoing server names are? I've already tried imap.aol.com for incoming mail and SMTP.aol.com for outgoing and these combinations don't work.
View 9 Replies View RelatedHow do I find out what my POP3/IMAP server is and what do I write in the box?
View 5 Replies View Relatedhere is the error i'm getting. The host 'courtneym513@microsoft.com' could not be found. Please verify that you have entered the server name correctly. Subject 'Hey', Account: 'courtneym513@microsoft.com', Server: 'courtneym513@microsoft.com', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 11003, Error Number: 0x800CCC0D
when i am trying to send an email. It is a new Personal laptop. How can is fix this problem. Plus i know when i set up the account i am not sure what IMAP server in and out name i should of put.
How can I reconnect? I hadn't used the account in awhile. But, I need to at this point. What can I do?
View 4 Replies View Relatedi am having trouble setting up e-mail account. do know know pop3 imap or server name where can i find thid info at?
View 9 Replies View RelatedI'm in college and tried to send a message my computer asks me to enter my email address and my name then my imap or pop3 server and receiver I don't know what this stuff is! I have the same problem on craigslist when I try to reply to stuff.
View 5 Replies View RelatedWhat do I put in the "incoming mail (POP3 or IMAP) server" box and the one beneath that?
View 4 Replies View RelatedI am having a problem with my Windows Mail. I have had to do a restore using the Packard Bell restore feature on the advice of my tech guy and have encountered a problem. Prior to the restore everything worked fine.
The problem is in the send/receiving of mail. When I press the Send/Receive button the Windows Mail dialogue box (showing the error tab) comes up a tells me;
Some errors occurred while processing the requested tasks. Please review the list of errors below for more details?
No errors are showing and at the bottom of the box it shows ?0 of 3 tasks completed successfully?.
At the bottom right hand corner of my screen it shows the number of the last messages received. I can still send messages if I go to; Tools, Send and Receive and Send.
On starting up my PC and Windows Mail, mail is received and sent in the normal way but when I try Send/Receive any time after that the problem occurs.
I have checked my ISP mailbox and there are no outstanding messages.
I have checked all my setting against my laptop and they match, I have three e-mail addresses and am operating Windows Vista Premium, all updates are downloaded automatically.
I have Vista Ultimate 64-bit computer as a server for home network. The clients are mixed Vista (Ultimate) 64-bit and XP (Professional) 32-bit computers. After installing Vista SP1 the Vista server reliability has gone bad for XP clients. When I use one of the Vista server disk shares from XP client heavily, the connection does down and I get "Not enough server storage is available to process this command" and/or "System error 58" in the client side. Vista server event viewer shows these error messages soon after the problems:- The server was unable to allocate from the system nonpaged pool because the pool was empty (system log / source srv / event ID 219)
The server was unable to allocate from the system nonpaged pool because the server reached the configured limit for nonpaged pool allocations (system log / source srv / event ID 2017) The server was unable to allocate a work item 43419 times in the last 60 seconds (system log / source srv / event ID 2021)this is a warning only The funny thing is that I can continue to use the same disk share from Vista client, but to be able to use the server again from the XP client I need to reboot the Vista server (no actions needed in the XP client side)....
from the first day I have seen plenty of errors in Event Viewer Acer Support even sent me System and Recovery Disc,s. I did a Recovery to Factory Default and there are 24 errors Errors in Event Viewer right after the Recovery was done, BEFORE I connect to the Internet for Updates. The only options this disc,s give me is Recovery to Factory default or recovery from back up, I don't have besides what good is it to make a backup when the first install is full of errors and I don't get to chose which applications or program s to install. In my older Computer, Vista home basic I get to Install Windows with no errors and get to chose which application to Install.
View 4 Replies View RelatedI am running Vista Business Edition I have a shared folder c:share on my hard drive, and I mapped that to my z: Now from command prompt which is launched with Admin privileges, i am not able to run any application located in Z:. for example Z:
est.exe...It gives an error - System cannot find the drive specified. How should i resolve this or in vista, we cant run any application located in network share from command prompt?
Anyone knows the name of a NewsGroup Server (NNTP) in the AT&T network?
View 9 Replies View RelatedI'm connected to a public network at a hospital where my husband is, and I can't send emails. I get these messages: The connection to the server has failed.
Subject 'Re: Tennis', Account: 'gccn', Server: 'smtp.comcast.net', Protocol: SMTP, Port: 25, Secure(SSL): No, Socket Error: 10060, Error Number: 0x800CCC0E AND Account: 'gccn', Server: 'mail.comcast.net', Protocol: POP3, Server Response: '-ERR authorization not enabled', Port: 110, Secure(SSL): No, Server Error: 0x800CCC90, Error Number: 0x800CCC18
I know it has something to do with authentification or authorization and have tried lots of different settings, but I can't seem to fix it.
I have a All in one printer connected to a pc with USB plug.. I want to connect another computer for use with this All In One. And still be able to use it WITH ALL it features. regardless of witch computer I was on , while trying to print. would a print servers do the trick or get a ubs hub (pluged into the wall for power) be sufficient..
View 6 Replies View RelatedThe problem is this: the file server will randomly seem to crash (hang) the network when the other machines are accessing it. This is more noticable with the XP machines, where the hang will cause explorer to crash, whereas the Vista machines accessing it will simply not connect. Occasionally the file server appears to reconnect after an hour or so, but mostly it will require a restart to get it back on the network and functioning correctly. I have had a look around at various forums, including this one, but have not seen this exact problem. I have tried solutions for other related problems, such as disabling IPv6, but this does still not seem to have solved the problem. Any ideas would be most welcome - obviously having to restart all the machines in the office a couple of times a day can be a bit of a pain!
View 8 Replies View RelatedWe have a Dell with Vista running on it. we connected it to the university network and are not able to get any browser to find any web site. I open a command line and do a ping both with ip address numbers and via name and ping works fine so there is network connectivity and name server access. I can't find any answer to why the browser will not work. I have tried the microsoft browser and mozilla neither will work. Does any one have any ideas? I am a nubie to Vista. but pretty well versed in 2000 and XP.
View 4 Replies View RelatedI recently upgraded a few of my systems to various versions of windows vista and I have run into an issue that is a bit hindering with regards to my media center. I upgraded my file server to Vista Ultimate and I upgraded my HTPC to Vista Home Premium. I'd like to add the media file folders from the file server to the video list on my htpc, the problem is, after i have added the folders to be watched on the file server they do not show up in the list after a reboot; unless i go into the network and actively log into the file server.
There is no password required, so all i need to do is to type anything in the username field and hit enter, then go back and refresh the videos list and the folders appear. The problem with this is each time i power on the htpc i need the mouse and keyboard which clutter up the living room. Id much rather have them both unplugged 99% of the time and as it stands now, this network login is the only thing i have used them for since i completed the configuration. It alsomakes it a bit confusing for my girlfriend (to the point where she just wont bother using it unless im home)
I have a problem trying to Map an XP drive on my Vista Home Basic Laptop that is proving a nightmare: We have several computers on our netwrok, including the XP server itself where we have our shared documents. (place where all shared files go that we want other users to see) I have mapped the same shared docs folder accross all of out XP machines. Plugged my Vista Home Basic Laptop into our network, couldnt map the shared docs folder on my server. After reading many how to's, i followed this guide: Microsoft Corporation I have downloaded and installed the LLTD responder on the server with XP All computers were restarted, now when looking on the laptops "Veiw full map" I can see FILE_STORAGE (our server) but the guide above says right click on the computer running XP, however when I do this nothing happens, it is a solid icon and clicking it does nothing.
All computers including the laptop are on the same workgroup The laptop has appeared when looking on the XP machine under viewing the network I have opened ports UDP: 137, 138, 1900 and TCP 21, 139, 445 2869 We have AVG Antivirus and Firewall on all machines including the laptop. AVG does not allow you to open ports, so the above ports were opened on my router. When I plugged the laptop into the network AVG asked me to select a profile, I selected ALLOW ALL for the time being as "Computer In Domain" was not there to select. The vista laptop has Network Disc. ON, File Sharing ON, Public Folder Sharing ON and Printer Sharing ON One thing I couldnt get my head round was the differance between Workgroup and Network. The workgroup is the same on all computers, but I wasnt aware that I had ever given a "Network" name on any of the XP machine. Vista did ask for a "Network" name. For safety i put the same name as is in the workgroup. Anyone any ideas, im desperate?
I'm trying to start a local tftp server session using SolarWinds or WinAgents TFTP Server Manger. However I keep getting the following messages: "WinAgents TFTP Server can not bind to UDP port 69 on one of local network interfaces. Probably, the port is used by other application. Please stop other software running on UDP port 69 and restart WinAgenst TFTP Server" or "SolarWinds UPD port 69 is currently used by another process: TftpService" When I tried to identify the program using UDP port 69 using the netstat -anb command I can't find anything that indicates that this port is in use. Has anybody encountered this problem I neee to use TFTP to copy an IOS from my laptop to a Cisco 2600 router.
View 7 Replies View RelatedHow do I connect my Vista Windows mail client to a mailbox on my SBS 2003 server? Exchange used to be an account type in Outlook Express, but appears not to be in Win Mail. But the Exchange server provides a POP3 mailbox to clients, I have an extra available, it would be nice if I could use it. The only reason that I would like to is because the Brother scanner application brings up Win Mail when it scans to email, even though I have set Outlook to be the default program for the .msg file type. If you know how to disable Win Mail, and let Outlook take the call, that
would work as well as connecting it to Exchange.
I am writing to this Forum in desperation because I cannot find any way to get in touch by email with Windows Live OneCare even though I am a paid subscriber. I have NOT had a good experience of MS tech support. After 18 months of endless problems with Windows VISTA Ultimate Edition V 6001 I now wish to reformat my computer and get RID of it altogether, replacing it with System 7 for which I have a serial number and a beta download from the recent Microsoft online download offer.
As VISTA seems to have eleminated DOS altogether and the old FDisk command doesn't work from a command line start, I have tried to reformat from my OEM Vista Ultimate Edition re-installation DVD which I am certain used to offer me reformat and partitioin delete as the first options but that no longer seems to offer me any reformat option at all and not only instists only on re-installing VISTA (which I no longer want) but leaves the old installation in a directory renamed "WindowsOld" which VISTA will then not allow me to delete....
I've been trying to figure out how to make a command prompt run a command line as soon as the box comes up.
I need this to happen all from one command line. A command prompt needs to open with "echo hi" being ran as a command line.
I'm having trouble with the REN command with wild cards as used from the command prompt. For example, in the REN command help, it says: "For example, if you had files that are named smitha.doc, smithb.doc, and smithc.doc, you could use the ren smith*.doc smythe*.doc command. All file names automatically show the new spelling, and are renamed smythea.doc, smytheb.doc, and smythec.doc.".........
View 5 Replies View RelatedAll of a sudden when I try to open attachments I get "The Command Failed To Execute" I hate Vista it gets worse and worse. They must have expected big problems as they uped their charges for help and when it crashes it now says do you want to return to your orginial site?
View 9 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
I hav disabled firewalls, virus checkers, tried secure connections etc and nothing
works. I have installed clients (Outlook, Outlook Express, many versions) before and they have all worked. I can even read my email from another machine with XP using my wireless network, however, everytime I try to update m IMAP folders in Windows Mail I get this message.
"Your IMAP command could not be sent to the server, due to non-network errors. This could, for example, indicate a lack of memory on your system."