I have fully licensed copies of Vista and XP on separate HD on the same PC and I have to physically swop the SATA cable inside the PC to boot. I still have some Vista incompatible software on XP that I have to use from time to time. Can I set this to boot from the PC then select which OS to use? Vista SP1 has been installed. Appreciate any advice as the cable switching is a bit of a pain.
View 9 Replieson a xp PRO pc, I installed a fresh copy of vista business edition. I must have missed the option for dual boot, It did install on a separate partition which was an empty E: for the XP system ( 4th partition on the large drive. now the once E; drive is C; and what was C: is not the e: drive. there seem to be no setting for me to allow optionally boot into the old xp pro which is still in the now active boot partition.
View 7 Replies View RelatedHere is my situation: I have XP installed on a SATA drive in a computer I just put together (AMD x2 5600+, ASUS M2N-SLI Deluxe, 2Gig Ram) and I want to install another SATA drive with Vista Ultimate 64 bit and I want the ability to dual-boot like some people do when they have 2 operating systems on the same drive but in different partitions. I originally install Vista Ultimate 64 bit as the O/S but it was incompatible with many of the programs I use so I installed XP Pro.Otherwise I liked Vista.
View 6 Replies View RelatedI've never dual-booted a system before and I'm interested in dual-booting my Vista with XP. I know they have to be on separate drives (though I'm under the impression that a partition is good enough... is that true?) but my question is: do I need to install separate instances of all of my programs (e.g. Steam, Office, Firefox, etc.) or can I just point XP to their locations and everything will work fine?
View 6 Replies View RelatedDoes anyone know if the XP Virtual Machine that comes with certain version of W7 comes with a separate disk? Or, is it woven into the W7 disk? I ask this in case I
1) need to revert completely to XP, or
2) like a different virtual machine better, such as Virtual Box.
Is there really some performance increase to be had by having the swap file on a separate hard disc? TBH, I did not notice much difference when I tried that configuration in the past, but them again, I tend not to hammer my physical memory
to zilch.
in my vista computer i have two partitions main C and recovery D that came like this when i bought the computer from dell. I have 1 main partition thats 500gb and another thats 15gb that i believe is called the recovery drive. Do i really need them separate like this. Whats the point in having them separate when i can combine them and have 1 nice partition
View 5 Replies View RelatedAs the title states, I am wondering if there would be any sort of (even minimal) performance boost to setting the recycle bin to its own partition. Honestly, I don't know of a way (as yet) to do this. But, it would be nice to have ALL of the space on my partitions, and less used by windows.
It is also sometimes annoying to see the dialog pop-up stating that windows doesn't have enough space to delete something due to allocated space. I know that I can change the amount of space allowed, but it would be much simpler to have 1 partition strictly to cover the recycle bin...........
Getting my new system in a few days and it will have Vista Prem 64bit installed. The new system is going to be used for gaming and some surfing, all other stuff such as downloading and internet banking will be done on this machine which is running XP along with Avast and Comodo.
My question is- For the gaming machine I'm going to use Avast AV but do I need a separate firewall or is the one built into Vista good enough? Also I have heard of windows defender, is this already on Vista? Any other things/suggestions I need to do as soon as I start the new machine up? I was thinking of doing a system restore point before I put anything on it!
I had 2 seperate e-mail accounts when I used Outlook one for myself and one for my wife to move from one to the other I went "file, switch identities". Have now a new PC with Windows mail on Vista and our two mail accounts come into the one account in windows mail. How can i seperate these?
View 4 Replies View RelatedI'm trying to organize my pictures and I've made things worse in the process. I know it must be something really simple but I'm clueless to it. When I uploaded my pics from my camera they went into separate files (each day different file). I just want to put them all in 1 file, eg Summer holiday in 1, Xmas in another.In the process of trying to do this, I've ended up dragging files into files.
View 5 Replies View RelatedIs there a clever way to move applications to another partition without having to reinstall them? I have walked through the registry changing partitions with some success but I had fewer and simpler applications back then. Similarly, in a multi-boot configuration with each OS and applications in separate partitions, is there a way to avoid installing applications for each OS?
View 7 Replies View RelatedxAorKZKHA.1592@TK2MSFTNGP06.phx.gbl> I wanted to try Win7 without losing Vista, so I installed it on a separate partition to dual boot.So I have Vista on C: and Win 7 on G: - same disk, different partitions. A boot menu was set up, but Win 7 boots by default if I don't choose Vista instead.I now want to move towards Win 7 on C:, and return to just one partition. But I have quite a lot of software and shortcuts now set up on G:, and if I were to delete C:, change G: to C: I'd have to start uninstalling and reinstalling everything so that C: was referenced. by everything. I'd rather install Win 7 onto c:, and gradually install software again, whilst being able to continue booting into Win 7 on G; to carry on working as needed. So, if I were to install Win 7 again onto the C: partition, either by doing an upgrade, or formatting C: and doing a fresh install,
a) would that cause any activation/legal problems, having Win 7 installed on the same computer twice in separate partitions
b) if it was OK to do that, which installation would become the default boot option.
In a NG, I have joined with a question similar to that of the OP. I wanted to avoid a new thread to prevent that NG of being extended too much, and I expected only one answer. But my question initiated a lot of following postings. So, after all I wish I had made up a new thread. Is it possible to separate all these postings into a separate thread? Or at least to change the content of the subject-line?
View 8 Replies View RelatedI have windows vista premium and there are 2 users on our computer. Whenever I load any software on my side, it also goes on to the other side and visa versa.When we had xp, this was not a problem as our settings were saved after each session. So my question is, how do I keep our settings separate in vista?
View 4 Replies View RelatedOk. I now own Vista and I'm trying to recreate the mail experience I had on my XP pc. My wife and I both have separate email accounts with our ISP and in XP Outlook Express we set up two identities so that our mail was separate.
When we opened up Outlook Express we were able to select which identity we wanted to operate under.
In Vista we log in to the pc using a single account and that's how we want to keep it.
Is it really impossible to have segregated email accounts in Vista?
I've seen hints that Live Mail, which is apparently new, allows this but none of the documentation is very clear.
Can (2) separate Contact Folders be set up in Widows Mail...
I would like to be able to have (2) separate folders with the ability to import addresses to each and be able to switch back and forth.
I've managed to create two (or more?) desktops (not just shortcut icons or copies). I don't know How, or When, so experimenting with "restore" times is kind of a moot point. One I assume is at the regular path, accessible through "my computer" on the left hand side under "folders". I can't get it's exact path because if I right-click on it and go to "properties" it opens up "Control Panel>Personalization". Opening the "desktop" via that path shows the icons/shortcuts I currently have on my "visual desktop". ("Visual Desktop = the desktop I see on my screen). If I add a new folder to my "Visual Desktop", this is where it shows up, not in any of the following locations.
Another one is accessible through my user account name after I open up "computer" under desktop (path: C:Users*username). The files shown here are various shortcuts, none of which are actually on my "visual desktop"..........
I plan to build a new computer with Vista as the OS using a 500gb or larger hard drive. What's the current trend toward partitions? One partition, two or more? OS by itself on a separate partition? Programs on another, then media files on another? Any advantage to keeping XP (at all) on a separate partition?
View 7 Replies View RelatedHas anybody installed Vista twice in separate disk partitions on the same PC? I've been successfully running multi-boot with 2 XPs and a Vista on 1 PC. There's plenty info about on how to do that. Now I'm going to separate all XP installs onto 1 PC, and all Vista installs onto another PC. Will this make life easier? So I'll be running Vista Home Premium twice on 1 PC. One install will be for production use, and the other for testing.
View 8 Replies View RelatedIs Defender a part of Vista or a separate download. I have Vista Home Premium 64.
View 7 Replies View Relatedattempting to setup individual inbox folders for 2 gmail accounts, so that mail from one account is forwarded only to it's respective inbox folder in windows mail? Using pop3 mode of gmail
View 5 Replies View RelatedI’m trying to shadow copy Volumes C and E to the separate internal HDD Volume D. I understand VSS requires Dynamic Disks. Diskmgmt.msc (command prompt/administrator) shows all drives as basic type. Right clicking on any of them does not offer ‘Conversion to Dynamic Disk’, and Properties don’t show a Shadow Copies tab.
1. How do I convert from Basic to Dynamic disks on my mobile computer?
2. Do both source and target drives have to be Basic type?
I went to turn it on this morning, I just had a black screen showing the following words;
Press F2 to run
Press F11 to boot menu
Auto detecting PRI Master Atapai CDROM.
It then went to reboot and select proper boot device or insert boot media in selected boot device and press a key. I went into the BIOS to change the boot order and inserted my Vista home premium 32bit. I then got windows is loading in files. After a short while I got the black start up screen with Microsoft Corporation but after a few seconds it just froze. Moments later it went to a blue screen with white writing part of which said the following; A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO PREVENT DAMAGE TI YOUR COMPUTER.
My Vista (Buiness. Edition) connects to a network through a proxy server at work. How can I set up a separate "profile" (not sure of right term) so I can use other network settings at home (no proxy) but not mess up my work network configuration? I get "cache access denied" in Internet Explorer. I researched this, but the other problems with this symptom do not appear to apply.
View 4 Replies View RelatedStarting about 2 weeks ago, I can't open attachments in Windows Mail. Message says "command failed to execute" I have been reading the posts and still don't know what to do. How do I know if IE8 has been installed as an update? I'm inexperienced with technical stuff. I don't think I installed it, could it have installed on it's own as an update? Tried saving them to desktop but don't know how to separate them from the e-mail, so they still don't open.
View 9 Replies View Relatedi can no longer boot up my computer as the boot/bcd file is miising or corrupt i found a windows artical on how to fix it and it didnt work ive also tryedd googleing the problem and got many results but none that seem to fit the problem or are helpful what can i do to solve this
View 9 Replies View RelatedI have a Dell Inspiron 530 Desktop and every now and then it won't boot up. I get a black screen with 'Windows Boot Manager' ," Windows failed to start. A recent hardware or software change might be the cause."
File: BootBCD
Status: 0xc000000f
Info: An error occurred while attemping to read the boot config data.
When I boot the PC with the Installation disc, it repairs it and it works until the next time. When I click on the details to see what is to be repaired, this come up:.......
I have windows xp installed right now and I dual booted with vista by re-partitioning my hard drive. After encountering problems with vista I delted the vista partition and resized the xp partition back to it's original size. I am now stuck with the windows vista boot loader which persistantly telling me that the windows vista files are not present etc. etc. Is there any way that I can delted the vista bootloader and go back to using the xp bootloader?
View 8 Replies View RelatedVista used to boot up very quickly. Now it spends ages on the page with the "loading" bar. Is it performing some sort of CHKDSK during this time? I only have sidebar and rocket dock starting up, and it's fast again when it gets to the desktop, it's just that loading bit takes quite an ages, and it didn't used to. Virus/spyware/malware free. How do i find out if it's doing some sort of chkdsk at boot?
View 9 Replies View RelatedI built a new machine.Running Vista Home premium,8GB of Ram,Phenom11 3.2MHz.
I have 2 hard drives.First one portioned to C: and D:
Second HD portioned into D: and E: I have Vista on C drive.I would like to Dual Boot Vista with Windows7.
My question is do I need a Boot loader application or does vista have the ability to dual boot?