How Get Network Security?
Jun 19, 2008I just purchased a laptop and have a wireless Netgear router. how I can make my network and computer the most secure possible?
View 4 Replies
ADVERTISEMENT
Wireless Network Security
Mar 23, 2008I have a Toshiba laptop that is connected to a wireless network in my home. My concern is security for this computer. I have been reading alot of articles on the internet concerning security, and most suggest several things, one being encryption, The others are enabeling static ip address and wireless mac address filtering. I contacted Verizon and asked them to help me secure this connection to my laptop and they enabled WEP and assigned a key. I then asked about the other two options mentioned above and they said all i needed was WEP enabled. Finally my question: Is that enough?
View 7 Replies View RelatedCannot Save WEP Network Security Key
Jan 14, 2010My WEP Network Security Key is not being saved in the Wireless Network Properties Screen Security tab. A couple of nights ago I used a motel wireless connection and I had to change some settings to make that work. Now I have changed everything back to my home router settings, the home connection is now fine, but I have to enter the home router Key every time I boot up even though I click on OK on the Wireless Network Properties screen Security tab. Is a configuration file holding previous, incorrect information that loads the wrong key on bootup?
View 4 Replies View RelatedNetwork Security Key Not Activate
Jun 28, 2009I have a wireless network in my home. I just purchased a Sony laptop with Vista Home business installed. When I try to get in Internet Explorer, many times I am unable. My network security key seems to always default to another code and I have to retype mine in in order to get on the internet. What can I do to have my key code be permanent?
View 4 Replies View Related"Security Network Key Incorrect".....but It's Not
Mar 23, 2008I am having some serious problems connecting to my wireless router. I have wpa-personal security and I bring my laptop from my work to home. The problem is everytime I bring it home it takes AT LEAST 20 times to connect to my wireless router. Everytime it comes back "your security key is incorrect", but it is NOT.
I am also not mistaking my network for another.
However if I boot up the laptop and let it sit by itself for about 30 minutes, it will just connect fine.
I have 2 other laptops that connect fine to the router with no problems.
Device info
Router: SMC Draft 11n Wireless 4-port SMCWBR14-N
Wireless card: Broadcom 802.11n (driver version 4.82.28.56)
I am thinking that Vista is sending the network key in a different version or something that makes my router hesitate?.html
Concistency Check: "replace Invalid Security Id With Default Security Id For File
Jun 29, 2009My computer is running the concistency check. It's at stage 3 and when it's almost complete it's starts to "replace invalid security Id with default security id for file ******" it's been doing this for a while now and I was wondering what I can do to speed it up. It's currently at 170000, and if I try to restart the computer the login screen will not load if I skip the disk check.
View 9 Replies View RelatedUsing Kaspersky As My Internet Security And In Past I Have Used Norton Security Suite
Dec 2, 2008I got Vista 32 bit installed on my laptop. I work from Internet And need a good firewall and security suite which can protect my computer from trojen and malewars and hackers. Currently i am using kaspersky as my internet security and in past i have used Norton Security suite, In Both I have noticed getting too much of hacking attempts 3/hr.
View 9 Replies View Related"incorrect Security Information, WEP Security Required"
Mar 23, 2008I have purchased a netgear wireless adapter to connect to my work supplier router. the router is set up with WPA-PSK and TKIP security, and is set not to broadcast. I have set up a network account with the correct details. My system does connect to the network, however, in the network screen the network is shown as "incorrect security information, WEP security required"
View 8 Replies View RelatedFile Sharing/network Discovery On, Private Network, Password Protection Disabled
May 6, 2008I have Vista x64 and I have read threads on this for weeks and can't fix it. I have file sharing/network discovery on, private network, password protection disabled, my shares set to everyone and everyone is on the same workgroup. My problem is that the x64 Vista computer will not see any of the XP (x86 or x64) computers and they can't see it from the Network Neighbourhood. However, if I type the IP address of the XP computers I
can access them. On the XP computers if I type the IP address I get an error that it isn't accessable and I might not have permission. However, if I type \192.168.0.100share or any of the other share names I access it just fine. pinging works too by IP but not by name. If I boot into the x86 install of have of Vista I can access XP computers from Vista and the Vista from XP by name and everything without typing any user names. The only differince between the two aside from x64 and x86 is that x86 isn't patched past SP1 as I don't use it often. Lastly after installing that XP patch I can see the x86 XP computers by name from the network map feature on Vista, still can't access them by name though...
Network Icon In System Tray Inaccurately Says It's Not Connected To Network
Mar 30, 2008I'm using Vista Home Premium and Windows Update tells me I'm up to date.
Every so often the Network icon in the System Tray tells me that it is not connected to a Network (by displaying a red X) though I can clearly see that I am.
Network And Sharing Center Window Show Unidentified Network
May 19, 2008I'm trying to network my new Optiplex 740 with Vista Business (32bit), and Norton 360, to my old Euro PC with W2K Pro. and SystemWorks, using basic Belkin /Realtek cards and yellow ethernet cable. My broadband connection is through my old machine and works perfectly, as does the network card installation.
My new machine also indicates that its card is correctly installed and functioning correctly. BUT the Network and Sharing Center window shows this computer as linked to an Unidentified network and no connection to either the other computer or broadband connection.........
Not Finding Wireless Network: Network Cable Is Nplugged
Nov 27, 2008I have bought DD a laptop for Christmas and thought I'd get it all set up beforehand. I already have a wireless network here at home, with 2 desktops running xp) and a macbook, they connect via a belkin wireless modem router. Vista however, doesn't even find a network, I get a message saying the network cable is nplugged. Its wireless enabled and the switch is on
View 9 Replies View Related2 Network Adapters And Become Default Network Adapter?
Mar 16, 2009One usb ethernet adapter for internet connection through an old router, one for a Linksys Wireless G router hard wired to remote security cameras sums up the problem where one cancels the other out. This is a problem for XP, Vista, and even 7 beta while the primary system still runs XP. The dsl connection is through an old dsl setup using a usb adapter while the Linksys pci adapter card or usb adapter once installed becomes the default network adapter.
The wireless router itself is plugged with the RJ-45 ethernet adapter directly into the main controller/dvr box for live wireless feed to the main XP system or this one as a second means along with direct plug in to a tv set in the room where the main box is located. In XP, Vista, and even the later 7 beta the same problem of running two adapters without conflict is the main question needing a working solution. This thread is intended to tax the most network familar people here.
The landlord runs the main XP system with eventual plans to upgrade to Vista while this system serves as a testing machine a good deal of the time explaining multiple OSs as a rule. The router and adapters are in working order not seeing any defects while canceling the original dsl adapter out when installed. That takes out the online connection in the process.
Freecom Network Drive Not Showing On Network
Dec 31, 2008Bought a Freecom Network Drive (LINK) from PC World today and got it set up and it seemed to be working fine on my Vista computer until I tryed to get it set up on my XP computer. It seemed to get setup ok but then the whole thing just stopped working. The hard drive spines and it works fine when plugged in as USB device but when trying to connect it to the network it simply does not show up. I have a Belkin G+MIMO Router and the Network Hard Drive is a Freecom Network Storage Hard Drive 250GB
Vista Network Not Connected And Private Network
May 15, 2010Just returned from holiday and while we were away I changed my laptop network in vista from private to public as advised and the internet worked fine. Now at home I can’t connect to my router, and I get a message saying that the details held on the computer is not the same as the router. Also there is no “customise” function being shown on the network and sharing centre screen to switch back to private network. I’ve tried everything to set up a connection, even a new one, but the same message appears all the time.
View 7 Replies View RelatedNetwork Via FireWire: Set Up Network Of Two Computers?
Feb 6, 2009Can I set up network of two computers with Windows Server 2008 and Windows Vista Home Basic with FireWire? How both systems will detect connection of two computers with FireWire cable? Does that connection make possible file exchange?
View 6 Replies View RelatedWireless Network , /XP Network
May 27, 2008ok so this problem has been going on for awhile now but has gotten worse somehow... before i could not access my vista computer upstairs from my xp computer downstairs. i've made sure the settings are what they should be on the vista computer since i can easily access my xp computer from the vista computer. now the problem has gotten worse by that i can't access my xp computer from the vista computer or vice versa so now i can't transfer files from each computer. i need to use my external drive or a flash drive.
View 9 Replies View RelatedSecurity
Mar 23, 2008Cannot reply, forward or send attachments. Have worked on this for 2 days within the Windows Mail Forum. Something is causing a delay in getting mail to the server. This appears to have something to do with security. Has anyone seen a resolution?
Details -
Unable to send mail problem was sporadic. Had Norton 2007. Took it in to tech support for service and they upgraded to 2008. At forum suggestion, deleted Norton and used the symantec utility to remove the remaining pieces. Replaced Norton with CA Suite. One person thought the Norton proxy may not be able to be removed................
Different With Security
Mar 26, 2010ive got windows vista home premium 32, it was all running fine with McAfee internet secuiryt no problems at all, then all of a sudden my McAfee could'nt update and asked me to reinstall the software, so i uninstalled it all and tried to reinstall it, but when i started to it came up with download error 12029. after looking around people said i might have a virus or spyware, downloaded malwherebytes and removed the viruses and spyware, then downloaded AVG free version and did another scan it found more stuff which now it has removed, i then ran another scan and it says the computer is clean. now other problems are occuring
1. still getting the download error from mcafee (ive also used the removal tool and preinstall from there site)
2. window won't update, just keep getting errors
3. windows defender won't turn on
4. some programs update and some won't
Security Account
Sep 26, 2008I moved my computer (Vista Business x32) from a domain (no longer available) to my work group. My domain account had local admin privileges on the machine so I was able to move the machine from the domain to the local work group (domain, admin, domain admin account are all gone). However, I forgot to create a local machine account before I rebooted and now I can't log in at all.I can log in or would I need to reinstall the OS?
View 9 Replies View RelatedWhat Is Best Security Protection?
Jun 9, 2008I have Kaspersky and it seems to be ok. But it is very weird and pretty hard to use. Im not sure if i want it anymore but i need to be 100% sure of another program before i uninstall the other one. I also wanted to know if it is possible to have 2 security protection on your computer at once. I would only want this because i would never want to have my computer being used without virus protection.
View 8 Replies View RelatedTake Control Of Security
Apr 13, 2009I want to install spam and virus filters in the internet based systems in my office. My work involves a lot of downloading from the net, and therefore always run the risk of viruses affecting the operating systems. I want an economical security service provider with state-of-the-art security techniques.
View 5 Replies View Related64 Crashing - Security?
May 15, 2008I have Vista Ultimate 64bit. I have all the updates including SP1 downloaded from Microsoft site. Up until yesterday everything has been working fine for the past month since I built a new system. Now all of a sudden my computer is crashing on me. No BSOD. Just shuts down and reboots. Last night this occured 5 times in the space of 4 hours..
Looking in my events log all I can see occuring at the times of the crashes is this information: Code integrity determined that the image hash of a file is not valid. The file could be corrupt due to unauthorized modification or the invalid hash could indicate a potential disk device error.
File Name: DeviceHarddiskVolume1WindowsSystemdrivers cpip.sys
I don't use windows firewall as I use the firewall built into Trend Micro Internet Security 2008. Checking though that programs logs shows nothing happening at the time of the crashes. After googling this and looking on Microsoft's site I am stumped at what I can do to resolve this. I do have windows updates on automatic and I recall an update occuring 2 days ago.
Shutdown Security
Jun 9, 2008I leave my pc running to allow various programs to run during the course of the day; however, other users manage to shutdown the system without any thought for my login "at work". Does anybody know of a "Shutdown Password" facility I can use which prevents this from happening?- I know I'm still at risk from the power supply being switched off.
View 4 Replies View RelatedSecurity Configuration Not To Use TCP/IP
Mar 23, 2008How can Vista (no router) be configured not to use TCP/IP as transport protocol for NetBIOS, SMB and RPC, thus leaving TCP/UDP ports 135,137-139 and 445 closed.The best to my understanding is that Seconfig works with WinXP only.
View 4 Replies View RelatedWindows.security Pop-up
Jun 4, 2009I am receiving this pop-up and I put in my e-mail address but I don't know if I ever had a password. What do I do now? I am unable to receive e-mails so I need to add or change my password but it's not asking me 'if I gorgot my password'.
View 4 Replies View RelatedSecurity Can Turn Off
Jun 8, 2008can you turn off the thing that says are you sure you want to start this program when you start it up like this:
View 4 Replies View RelatedThe Security Center Can't Be Started
Aug 15, 2009When i press Turn On now it says " The security center can't be started". What i must to do?
View 3 Replies View RelatedSecurity Window Keeps Popping Up
Aug 1, 2009For some reason this window has started popping up!
Please verify that both the username and password are correct for your mail server.'
To get rid of the Window I have to enter my details and password to gain access to Windows Mail.
Any tips please on resolving this problem. I am using Vista 32 bit. ISP Tiscali. AVG email scanning incoming.
Security Impossible To Update
Jun 21, 2008i have a vista computer with bullguard pre installed.Whenever i start up,a balloon at the bottom of the screen tells me defender is out of date.However,it has always been impossible to update this or indeed download any windows updates since i bought the computer new a few months ago.
View 9 Replies View RelatedNet Framework 1.1 SP1 Security Update
Oct 22, 2009why is my computer telling me it is failing to update Net Framework 1.1 SP1. I can't find 1.1 on my computer to update , do I need it.
View 9 Replies View Related