I currently have a HP Pavillion Notebook installed with Windows Vista Home Premium, and everytime I try to do a PC Health Check with Total Care Advisor, I get the blue screen and my comp shuts down. I already went to HP support, but they didn't fix it either.
View 8 Replies
I find IE7 unusable and have installed another browser as default. Unfortunately, the HP Health Check utility uses Windows Help and Support for some downloads, & that seems to only use IE7.
1. It is refusing to download an important security update because of my security settings for IE7
2. it won't tell me what security settings are responsible; and
3. it doesn't even indicate where its trying to download from so I can use my default browser to manually download and install the security update.
The only thing I can think of which might work is setting all security settings in IE7 to minimum. Any other ideas, eg how to get Windows Help & Support to use the default browser?
One of my computers running "HDD Health" program shows no detail drive data. I've got HDD health installed on two very similar machines running Vista on Core 2 Duo ASUS P5DG MBs. Both have 3 hard drives but only one of these machine shows drive detail in HDD Health. One installation works fine but the other has no details at all. I'm wondering which of my setting is wrong
View 5 Replies View RelatedAnyone familiar enough with a sys health report to care to take a look for me and decypher it? There are several concerns in it. Just need to know how serious, or should I disergard? That being said, I'm not sure how to even post that one.I don't think I've ever had this many issues in this short a time span ever. I'm prety sure this one stems from the whole partition thing. Oh, while I'm thinking of it, any suggestions on the best config. to manage partitions? Single OS boot, dual HDD (internal)
View 8 Replies View RelatedAfter running the System Health Report from here;
System Health Report
at the System Diagnostic Report, I get a warning advising that the scan failed to detect running anti-virus, anti-spyware etc. protection, here and yet at Start>Control Panel>Security Centre, all protection requirements are shown as up and running, here
is there any way that I can get the scan to recognise the Security protection setup, and so include it in the System Diagnostic Report? I've had no problems with viruses, malware or spyware. This is purely an administrative issue to try and get the System Diagnostic Report to give a true account of the system.
review this if you can't generate a system health report the common way
View 3 Replies View RelatedVista started giving a blue screen a couple of days ago. Mentioned something about a bad device, but no new devices have been added. Went through the typical steps, tried to boot in safe mode and got the following errors:
AtBroker.exe The application failed to initialize properly. Click OK.
Explorer.exe The application failed to initialize properly. Blue Screen
Then booted to my install dvd, tried to fix errors. Came back with a failed check at the file system integrity check. Ran the check a second time and no errors are found. Can't boot in safe mode, and when i try to repair errors I get no errors found.
I'm unable to use spell check. I keep getting the following message "This language is no longer available for spell check". What do I need to do to activate spell check?
View 9 Replies View RelatedHello, my son's pc crashed and will only boot to the black screen with green loading bar, then quits. Monitor keeps going to sleep.
I tried everything: system repair (which says it can't do - corrupt registry). Restore (can't - no restore point was set.) Go back to last known good config - won't work it crashes.
I ran a memory test and all was good.
So, I saw on this site where it was advised to do an upgrade/repair, but I can't because the option is grayed out and disabled. I tried starting with the disc in, and also by starting and then putting the disk in. If I wait until the machine starts and put the disk in, it will not work. It crashes. If I put the disk in and then start the machine is when I get to the install screen and eventually the 'update is disabled' screen.
I'm really trying to avoid a new install. I wonder if there is a way to get around the disabled thing in my case?
I have a dell Inspiron 1525 with vista home premium and I resently downloaded Last chaos and I tried to play it, and It was fine logging in fine for a couple of seconds and then it crashed. anyone know how to make it work? when it crashes my computer is fine, the screen is fine everything is it simply says, program not responding so i exit out ive uninstalled it and re installed it and run it as an adminstrator nothings working
my computer crashed and I tried to recover it using a recovery disk.. but suddenly I choosed and click the TOSHIBA recovery wizard.. And there's a 2 option...Recovery of factory Default Software and the 2nd option is Erase the hard disk(delete all the data and partitions from your hard disk) then I took 10 hours of this..then when it finished the process.. I try to restart my laptop then suddenly appears this word with a black screen.. (invalid partition table)
View 6 Replies View RelatedEverytime i start Photoshop 7 Windows Data execution prevention closes the application with the following message. I am running Windows vista ultimate 64 bit.
View 4 Replies View RelatedI find every morning Outlook crashed. Computer is continuously busy (25% of CPU)Rebooting solves the problem, but next morning again crash. Only program running during the night (as far as I can see) is Windows Defender.
View 4 Replies View Relatedmy PC crashed and will not boot, the NTOSKRNL.EXE is missing or corrupt, repair from the DVD does nor fix the problem. I need to reinstall but the only option I get when bootin from the DVD is to "Install from Windows" but Windows will not boot up.What can I do?
View 4 Replies View RelatedI'm a Vista and IE user, not a Developer. Sequence of events:
last week... downloaded Vista Service Pack 1
this week... IE8 has stopped working... screen goes white... DEP
problem (blocks code execution) or DEP/NX No-Execute Memory
Protection.....................
I installed vista sp2 yesterday and now my laptop won't start. it offers two options, start in repair mode or start normally. I have an 18 month old Toshiba Equiium running vista home P 32 bit. If I start normally, the microsoft logo comes up and then the screen blips blue momentarily then it goes off. If I run the repair, it scans for faults, then prompts to run a system restore. I take this option and then it takes many minutes to attempt repairs - ultimately ending with 'windows cannot repair..."
there is a log with lots of 0x0 type errors notices (which are meaningles to me) I can't even get to the point where I could elect to restore to last best save or whatever. I have all my docs backed up on a portable HD but I cannot get past this failed repair message.
Recently, my Vista x32 crashed. I deleted it and put on Windows XP. (This was three days ago) I now wish to go back to Vista, as I didn't expect this and never planned to turn to XP. A vista CD did not come with my laptop, but I have a serial. My friend had Vista and when he installed it, it would only be compliant with the serial number it came with. Is there any way to recover my Vista?
View 9 Replies View RelatedYesterday I was playing a game, and it just pixelated my screen and crashed. I restarted my Vista system, and it couldn't reboot. I reinstalled a fresh version of Windows 7 thinking it might help out. Everything is okay, I run 1280x800 without the drivers for the video but once I install NVIDIA Drivers, it crashes. I can't play any games this way.
View 4 Replies View RelatedMy Laptop was taking about 8-9 mins on average to boot. But Runs Great once running. also shut down was 4-5 mins. I tried Defrag, CCleaner Defrag Registry, Registry Cleanup,enable both cpu's at start up,ran Avanquest's System Suite Utilities, Chkdsk/f /r,also sfc /scannow.so reading on some forums, a lot of advice was to update all drivers. So I got Driver Genius Pro 9 by avanquest (Driversoft company when installed)this program found 22 drivers out of date. so I created a restore Point and did a full registry export(backup).next, I let all the drivers completely download, then First, I installed Intel turbo memory drivers,everything was functioning well, so I proceeded to install Intel chipset device software.
3rd was the Nvidia Display Drivers so I made a second Restore point (I had issues in the past with display drivers) So I installed the Nvidia drivers and on reboot I input my password and it says The User Profile Service service failed the logon. User Profile cannot be loaded. I tried to run Restore but it says Disk OS(C) has errors(Windows detected file system corruption on OS(C). you must check the disk for errors before it can be restored. checking disk OS (C) - Some Problems were found and fixed. But at reboot - same issue. so I went to vista forums."Brink" had some great advice I used that I found in a thread, to turn on the "Real" administrator account in safe mode to gain access and I uninstalled the Nvidia drivers under the admin acct. at reboot states corrupt system files (CheckDisk) But when I tried to run driver Genius in admin again to reverse the intel drivers (this shows up as Intel Matrix Storage Manager in Start>Programs) the PC crashed.
I ran CHKDSK /f .NOW I can boot into my acct. but there is NO sound device found, sidebar gadget shows no battery,or battery activity.Also bluetooth Hardware not functioning. The Drivers for bluetooth and sound show "Functioning" in device manager. Someone HELP Please as I spent many many months customizing and lots of money on software that will be lost. It seems to be fixable but HOW?
I have a gateway MT3422 that I have had for 2 years and it came with vista. I have had to restore my computer once since I have had it and never had any serious problems with it. 3 months ago, my computer was trying to install SP1 and when the computer restarts, it goes to a blue screen, then into a black screen and it says "error, calling phyllat. can not find operating system" and it locks up. I push ALT+CTRL+DEL to reset it and it reboots and says the upgrade did not install and gives me the option to reinstall it. After 3 months of trying, I gave up and ignored my computer to download and install the service pack.
Then one day, it actually installed SP1 and when it restarted, it said "error, do you wish to launch system restore (recommended)" I did and it went to a black screen for 4 hours - no cpu or aything running or eve the blue cpu light to show its running. No fan on, no noise from the processor. I shut my computer off and it doesnt ever go to the windows vista loading screen.
Ive tried to boot in safe mode and it gets hung up on system/windows32.....drv and never goes any further and gets caught in a loop. I pushed f8 to launch the repair mode, and it gets caught in a loop. I put i my restore disc that came with my laptop and when I ask it to install windows vista, it gets caught in a loop. tried to do a system restore and it cant because my C drive is corrupted.
I have 3 VB machines running IE8. All worked fine until today, where nobody can open the IE8 app. The one XP machine in the office is working fine on IE8, and the Windows SBS 2008 machine we have is running fine on IE7. We did emergency Firefox installs, and this is what we are using now to do browsing. It looks like the program is trying to open, but just doesn't. The only update installed yesterday was a definition update for Windows defender, although since then I have installed SP2 on my machine to see if it cures.
View 5 Replies View RelatedMy hard drive crashed, so i bought a new one but when i try to run the recovery dvd disc, as soon as i click start it says Error 100a if problem persists contact hp. i called them and they're telling me i now need to get a new recovery disc, but i dont think they know what they're talking about and im sure they will just tell me i need to buy something else when that doesnt work
View 6 Replies View RelatedI've had windows vista on my laptop for over a year (it came with it) and it's pretty slick and clean looking but why isn't it compatible with a lot of software! like for instance, the window's chess game...worked twice then never worked again...always gives the "executable for chess game has stopped working". I gave up on that. another one, iTunes...has numerous problems in running. Now, I've just recently gotten the sims 2 deluxe and it was running okay but now I've gotten an expansion pack for it and the game works okay once after installation then will no open again and gives me an error.
"The application has crashed and will now terminate" I've tried absolutely everything (and making sure my games and applications meet the system requirements, and they do, running it in compatibility mode, updating my sims games which open for business update will not update after installing it once. It works if i install it immediately after I install OFB..but even then so, it crashes after one time playing the game!).......
When installing a printer - at various stages of the process, the installation will fail. Two messages appear:
1) Unable to install printer. Operation could not be completed (error 0x000006be)
2) Spooler subsystem app stopped working and was closed. A problem caused the application to stop working correctly.
Windows will notify you if a solution is available. This computer is running Windows Vista. This issue occurs with SP1 as well. This computer has been re-imaged several times and the issue is still there.
Was installing service pack 2 and system crashed now can not even get back to my old vista. Seems to be loading and then I get: !!oxc 0190005!! 9293/45274 (registrymachineschemawcm.//microsoft-...) Then it freezes. I let it stay here for 18 hours and nothing. Tried to boot with my old vista windows disk and can not get a fix or get back to loading anything. Latest error said windows can not fix problem. Frequant black screen of death after bios or it goes to above point and stops.
View 4 Replies View RelatedI have a Sony laptop with Windows Vista as operating system. The system crashed. So I initialised a new start via CTRL, ALT and DEL. Unfortunately, the shut down process got stuck and the screen just displays "shut down" without doing anything. It remained like this for a couple of minutes when I hold the turn-on/off button pressed. I was expecting to force my laptop to restart again (which is the usual case on a Windows XP machine). However, my laptop just went to the stand-by modus. Pressing the turn-on/off gave back the frozen display of "shut down".
View 4 Replies View RelatedI installed autoruns and conveniently disabled just a few nuiscance startups like google toolbar updater, javaupdate, msdefender after a reboot I could not longer boot into vista. there was some error message indicating autochk corrupted or something to the affect and when ever I started in safemode the system would halt at crcdisk. anyways since nothing was panning out via the diagnostic menu or with a visto boot cd,
View 4 Replies View Relatedmy system is crashed when i start it dosent load a blue screen appears and nothing happens it jsut restarts so plzz hlp me tell me wat i should doand 1 more thing it dosent open safe mode alsobut i hab backed up my system in other local disk tell me how to boot it
View 4 Replies View RelatedI don't know if anyone else had a problem with the latest update from the wonderful people at Microsoft but I sure did. The system suddenly went into a loop trying to install the latest update then shut down at installing step 3 of 3 at 0%. Well I tried everything and then finally did a reinstall and NOT formatting the drive as to keep the windows.old files. Everything worked great and then the install happened again but this time it took with no problem. It may have been that at the same time cyberlink was having issues with playing a blue ray but I am not sure. I just thought I might mention the solution in case anyone else had the problem. Now everything is nearly back up and no problems so far.
View 4 Replies View RelatedTried installing Kaspersky Anti-Virus 2009 (KAV) on a friends Vista machine and it crashed during the install. I was required to use the last restore point to get the machine up and running. Has anyone had similar issues w/KAV & Vista 64-bit? When I tried to install KAV initially it found Norton and would not install. I removed Norton but did not reboot before installing KAV. Does anyone think this might be the cause? I am reluctant to try again as the computer is for my friends business and he lost a few files when I went to the restore point.
View 4 Replies View RelatedI bought sims 2 to play on my Toshiba laptop, which runs with Vista, and it worked fine for aaaages, but then one day when i took my sim lady downtown, it froze while loading the downtown screen, and when i restarted and re-opened that family, it wouldnt work and was constantly frozen. since then it crashed everytime i tried starting sims or saving a family id made. it doesnt even stay on long enough to move a family into a house. I dont get an error message, it just stops loading or freezes. When i ctrl alt and del it says the programme is not responding. I bought sims seasons, and im still having the same problem. i have ran numerous virus checks and my laptop is fine. ive also uninstalled and reinstalled many times. Ive also tried changing game compatability without success. Ive gone as far as going and buying a new sims 2!
Here are my directX Diagnostics..
System Information
Time of this report: 3/15/2008, 14:15:51
Machine name: BETHANYGEORGIA
Operating System: Windows Vista™ Home Premium (6.0, Build 6000) (6000.vista_gdr.071023-1545)
Language: English (Regional Setting: English)
System Manufacturer: TOSHIBA
System Model: Satellite L40..........
