HP Laserjet 1022: Won't Let Position Image On Page
Jun 10, 2009
I now have Vista Home Premium 64bit. My HP Laserjet 1022 prints just fine... BUT it won't let me position the image on the page the way I want it to. Sometimes I have a 16x22-inch image that I need to print full-size--what I've always done in the past (when I had Windows XP) is print it in four different sections. When I would start to print, it would automatically show me how the image was positioned on the page and I could move it around to get it in the right position to print one-quarter at a time. Now it does not give me that option.
View 4 Replies
ADVERTISEMENT
Mar 23, 2008
Vista Bus x64 / Office Pro 2007. how to do the following that were simple to do in XP fax:
1. Save a single page of a multipage fax as an image (.png, gif, tif, jpg whatever)? Easy to save as a multipage .tif, but most sw opens only the first page. I regularly need to save the 3rd page (which is an invoice) of a 3 page fax; ie. I want an image of just the invoice (pref .png or gif). Was easy to do in XP.
2. Change the fax resolution (eg. faxing a Word doc - mainly text). Seem to have no option to select the fax resolution & quality seems worse than XP (I used 200x200).
3. I cannot get Outlook contacts to show up in the Fax & Scan utility. Just Windows Contacts (which I do not use).
View 9 Replies
View Related
Sep 27, 2009
There seems to be no way to make my Sony Vaio with Vista print to my HP LaserJet 1300
View 9 Replies
View Related
Oct 21, 2007
When I open hotmail from windows live messenger, the page opens from an already open internet explorer web page + a new one with a message saying that the email address or password is incorrect. Does it happen to anyone else here?
View 7 Replies
View Related
Mar 26, 2008
I have a new Windows Ultimate Installation and changed the Control Panel to Classic View, and also expanded it into the upper part of the monitor, but it does not remember it.
View 5 Replies
View Related
Mar 23, 2008
I have a new Windows Ultimate Installation and changed the Control Panel to Classic View, and also expanded it into the upper part of the monitor, but it does not remember it.
View 5 Replies
View Related
Mar 15, 2008
Is there a way to set constant UAC popup window positions? It appears in different places on the screen depending on application, for example while starting Total Commander with administrator's right the UAC window appears at the left low corner, Symantec Endpoint Protection - at the middle of the screen's bottom. It's not a big problem of course, but maybe it is possible to fix such behavior?
View 5 Replies
View Related
Feb 17, 2009
I didn't seem to find a solution for this issue. I have a wallpaper that's 1280x800 and that's my monitor's resolution as well. I tried to have it "fit to screen" but the wallpaper ends up being at the upper left side of my screen (cutting part of the wallpaper). I've also tried the other available options tiling and centering but they all came out to be the same. I have to change the resolution every time I turn on my laptop in order for it to actually fit to the screen; change 1280 to another resolution and then change it back again to 1280 for it to actually fit. But even still this option doesn't really cover my entire screen (2nd picture: Top part
View 3 Replies
View Related
Mar 30, 2009
Me and lwbh have been trying to solve a problem where 2 of the options down the bottom of the Picture Position selection menu are missing.We understand that vista ultimate has all 5,but Home Premium only has 3.We were wondering if anyone knows how to enable those extra buttons under vista Home Premium(see the examples if you don't know what I mean).
View 6 Replies
View Related
May 19, 2009
I've seen numerous posts out there about how to get Vista to remember the size and position of Windows Explorer. Altering registry keys, holding down Alt, Ctrl, or Shift while closing etc. None of these worked reliably for me. Here's what I've stumbled across that works in my Vista Home Premium 32bit:
* Position and size Windows Explorer as desired.
* Select the Computer folder (via Navigation Pane or Address Bar)
* Close Windows Explorer (no need to hold down any keys)
View 4 Replies
View Related
Mar 29, 2008
I use a HP LaserJet 1012 printer with two WinXP/2 PCs on a wireless network. I also have a Vista laptop but Vista and the HP 1012 are not compatible. Are there any signs that HP or MS will address this compatibility problem any time soon? Is there a workaround?
View 9 Replies
View Related
Mar 23, 2008
I have troubles getting my laserjet 1018 to work with my Vista Home laptop. The printer is set up to my desktop computer wich runs Vista Ultimate and i have shared it in the network. Everything works alright until I adds the printer on my laptop. After that I can't print from any of the computers and the printer que just fills up and i can't empty it. If i reinstall the printer drivers on the desktop computer its start working there again but I cant get it to work propely when i have installed it on the laptop.
View 5 Replies
View Related
Dec 24, 2008
I am trying to install this printer (HP Laserjet P2015d) on my Vista 64 machine. It works fine on my XP Pro machine. HP has posted drivers for this OS/printer configuration (HP LaserJet P2015 Printer series*-* Download drivers and software - HP Business Support Center).
However, the installation programs does not work. The installation program does not seem to recognize the printer even when the printer is connected and turned on. Ironically the device (occasionally) shows up on the Vista Device manager panel, but not on the printer panel. The installation instruction mentions that the new hardware wizard should pop up on connecting, but it does not.
I contacted HP support (a nightmarish labyrinth of automated messages). After negotiating through this maize for more than 15 minutes, I finally reach a human. Guess what? They want money to fix their own problem! It is hardly a year old.
View 6 Replies
View Related
Jun 29, 2008
I can no longer print front to back, looks like I lost the driver that let me do that, the HP drivers and the default don't work. There is an option to print on both sides but nothing happens when I click it. Anyone know the fix?
View 5 Replies
View Related
Jun 19, 2008
I have a Toshiba laptop running Vista home basic. I use an HP laserjet 1100 parallel printer which I plug (via a USB-to-parallel converter cable) into a USB hub which feeds into one of the USB ports on my laptop. Very often, when I try to print (Word document, web page, pdf file, anything) nothing happens until I remove the converter cable from the USB hub and then reconnect it. After I have done this, the printer will then work fine from then on, but will then stop working whenever I reboot the computer. If, when I reach the point at which "nothing happens", I remove and rejoin the converter cable from the printer cable, or remove and rejoin the printer cable from the printer, that doesn't solve the problem. And if I have an extension USB cable joining the USB hub to the converter cable, and remove and rejoin the converter cable from the extension cable, that doesn't solve the problem either. The only thing which works is removing the cable from the USB hub and then reinserting it, and this usually works every time. It's not a big problem, but it's irritating to have to scrabble around about the cables. how I might be able to get my printer to start each time without having to fiddle about with the leads?
View 4 Replies
View Related
May 26, 2008
All free stuff (not necessarily 64-bit, but I have found them flawless with vista x64 and I'm sure most of you probably know these already)
- "Transparent" Tools -
- Desktop Icon Position/Restore (32-bit and 64-bit versions) Restore your icon layout after updating your display driver, etc.
- ClipBoardPath (32-Bit) As far as I'm concerned, this is much better than the default in vista. I use a lot of design programs and I need the file paths from inside viewers such as acdsee and this desplays nicely, whereas the default vista one can't be accessed.......
View 9 Replies
View Related
Apr 3, 2010
BTW - My system is Vista Home Premium 64-bit NVIDIA was randomly changing the placement of my desktop icons. UNTIL, I updated the drivers to 191.07. After that, the desktop stabilized and I didn't have an issue. NOTE: My version of NVIDIA is 8500 GT/9200 (not sure why it has two?) I just updated the drivers today to 197.13 and sure enough . . . during installation, it took my desktop icons, rearranged them, and shoved them all to the left. I cannot tell you how irritating this is to me.
I have read some of the other threads and the general concensus then, was that there is no way to lock the desktop. Has anyone found a way to either lock the desktop or resolve this issue? I assume I'm not alone in this. Course the "easy" fix would be to just restore back to the earlier drivers, but . . . I'm thinking that it's really best to have the most up-to-date ones - yes??
View 7 Replies
View Related
Feb 6, 2009
If Vista no longer or hasn't been able to install your trusty Laser Jet 1000 printer driver, then you are not alone. The solution is to connect a slower 1.0 USB Hub in between the LaserJet 1000 and Vista. For my particular resolution a Belkin F5U021 USB Hub was the key to success. Once the hub was connected, Vista expeditiously recognized and automatically installed the HP Laser Jet 1000 driver, created for WinXP.....
View 7 Replies
View Related
May 16, 2008
I really need some software like this. I used one on XP but it does not work in Vista. The icons are wildely dancing around my desktop every time I do something with the sidebar or switch from the full screen game. Change resolution or such and It is really annoying They often even get under the sidebar so I cannot use them...
View 4 Replies
View Related
Apr 12, 2009
Setup Vista Ultimate x64. I have the following printer HP color laserjet 2605dn and it won't let me print in duplex mode looked on Hp web site for installation drivers and found nothing, then I found this file EZInstall, but It can't find my printer on the network.
View 6 Replies
View Related
Apr 2, 2008
I'm trying to install an Hp LaserJet printer, simple task... but then, after a couple of "next's" in the installation, a message pops up saying i have no administrator privileges... ok, after reading about the famous UAC, it still wont install after disableing it... I also tred moving some of the options on the administrative tools - local security settings... but thre's no way. I have reinstalled Vista a couple of times just in case and still nothing. I'm Runing Windows Vista Ultimate, tried with and with out SP1.
View 7 Replies
View Related
Mar 10, 2010
I changed laptops in a docking station and used a drivers CD to install the printer which was attached. Test pages and anything else I try to print goes into the print queue but never prints, finally showing an error. I downloaded the latest drivers from HP and installed them, but this hasn't fixed the problem. The original laptop still prints fine from that docking station. The old laptop was WinXP, this one is Vista. I ran the "FixIt" diagnostics but it said all problems were fixed, and it still won't print.
View 7 Replies
View Related
May 2, 2008
I have Vista 64 Ultimate & Asus M2N-SLI Deluxe board.I have tring to hook up a HP 4000n printer with a parallel port. It just won't work. I have tried everything including downloading 64 bit drivers, changing the parallel port settings in the bios, etc. I suspect it has something to do with the port because the printer does not respond at all to anything I do.
View 6 Replies
View Related
Sep 21, 2009
I have an HP DV7 notebook that I recently added a second SATA 500 GB hard drive in the expansion bay. The purpose of the drive is to serve as a data drive. I also intend to store an image of my system disk on this internal expansion drive so that I can restore my system and apps when I am in the field. For most purposes the drive seems to be functioning normally. However, I recently noticed that, without my instructions, HP Updates were installing suipport files on my expansion disk rather than on my system disk and I have become concerned that Windows Updates may also end up on the expansion drive (so far they appear not to have done this). On further inspection in Computer Management - Disk Managment I discovered that when I put the expansion drive into the 2nd bay, my original system disk was automatically bumped from the Disk 0 position to the Disk 1 position and my expansion disk became the new Disk 0.
In Computer Managment - Disk Management the system currently looks like
Disk 0 - F: Expansion Drive - Healthy, Primary Partition
Disk 1 - C: - Healthy, System, Boot, Page File, Active, Crash Dump,Primary Partition.
If I physically pull out the F: drive from the machine the C: drive returns to the Disk 0 position. I am concerned that my system and application updates are going to get splattered across two drives when I want them to remain on the original C: drive. I can find no way in BIOS or Computer Management - Disk Management to assign the Disk and physically swapping the drives makes the system disk unbootable. Am I at risk of splattering my Window updates across two drives? Should I instruct Vista to regard my system disk C: as Disk 0 and how to I do this?
View 4 Replies
View Related
Jan 8, 2009
I wanted to know, how do i set this image On Startup What i have is ridiculous, it is a green bar only.
View 6 Replies
View Related
Mar 26, 2008
before this i try to install vista on my machine. and for sure in that time we need to create user (adminstrator) before we start using the vista. after that, i try to keep an image for my vista because if anything happen, it will be more easier to me. then, i try to image on my machine again. but, there already have i user which mean the administrator that i create during the 1st installation. so, when i do the image, i need to put the different user name because the user name that i try to create already exist. so that will create 2 different user when imaging is done. is there any way how to delete the 1st user? so when imaging is done, it will only 1 user (new user) and the windows will be automatically show the desktop. (i know how to delete from control panel>user account). actually this is for my client.
View 5 Replies
View Related
May 25, 2008
why cant i put a background image on my laptop? the only thing it allows me to do is change the backgrounds colors.
View 4 Replies
View Related
Jul 30, 2008
Just recently my shortcuts all have a broken link image where the little shortcut arrow would appear.
View 3 Replies
View Related
Aug 19, 2007
Mounting a CD image is a basic feature of almost every operating system package except for Microsoft Windows. Microsoft has never shipped this feature in any version of Windows including Windows Vista. Mounting a CD image is very useful when you have downloaded a .ISO cd image and you do not want to waste the time or the media to burn a copy. Since Windows Vista does not have this functionality built-in, you will need to download a utility. One popular utility that will mount CD images is called elby CloneDrive. Best of all, CloneDrive is free and easy to use. Follow these steps to mount CD images in Windows Vista with CloneDrive: ....
View 0 Replies
View Related
May 12, 2008
When I save any kind of image file to my desktop (jpeg, gif etc.) the file
wont open unless I put it in a folder first. I click on it and nothing
happens. I try right click > open with > and nothing happens, they will only
open if they are put in a folder. This problem only happens with image
files, all other files open with no problems.
I don't have SP1 installed on my Vista home premium.
View 9 Replies
View Related
Jan 12, 2010
I utilized Gadwin Print Screen to capture a screen. I captured same and was trying to send the photo to desktop as a "JPEG" file. Well it is on my desktop, and I cannot get rid of it. Programs work, but must access them thru start menu. Tried to perform "system restore" but it would not correct the problem. Can anyone help me get my desktop screen back?
View 7 Replies
View Related
