I have Vista 64 Ultimate & Asus M2N-SLI Deluxe board.I have tring to hook up a HP 4000n printer with a parallel port. It just won't work. I have tried everything including downloading 64 bit drivers, changing the parallel port settings in the bios, etc. I suspect it has something to do with the port because the printer does not respond at all to anything I do.
View 6 Repliesparallel port driver service failed to start due to the following error:
The service cannot be started either because it ia disabled or it has no enabled devices associated with it.
I use a HP LaserJet 1012 printer with two WinXP/2 PCs on a wireless network. I also have a Vista laptop but Vista and the HP 1012 are not compatible. Are there any signs that HP or MS will address this compatibility problem any time soon? Is there a workaround?
View 9 Replies View RelatedI have troubles getting my laserjet 1018 to work with my Vista Home laptop. The printer is set up to my desktop computer wich runs Vista Ultimate and i have shared it in the network. Everything works alright until I adds the printer on my laptop. After that I can't print from any of the computers and the printer que just fills up and i can't empty it. If i reinstall the printer drivers on the desktop computer its start working there again but I cant get it to work propely when i have installed it on the laptop.
View 5 Replies View RelatedI'm trying to install an Hp LaserJet printer, simple task... but then, after a couple of "next's" in the installation, a message pops up saying i have no administrator privileges... ok, after reading about the famous UAC, it still wont install after disableing it... I also tred moving some of the options on the administrative tools - local security settings... but thre's no way. I have reinstalled Vista a couple of times just in case and still nothing. I'm Runing Windows Vista Ultimate, tried with and with out SP1.
View 7 Replies View RelatedI have Toshiba notebook with Vista. I need to connect HP LaserJet 1160printer. My notebook doesn't detect the printer. How can I install dot4 porton the notebook?
View 9 Replies View RelatedThere seems to be no way to make my Sony Vaio with Vista print to my HP LaserJet 1300
View 9 Replies View RelatedI have evga motherboard with built in Realtek HD audio (ALC883). Board features 2 ports for digital audio (optical and coaxial). and according to manual both are output. However when installed vista drivers one of the ports has been chosen as digital output (optical) and another as digital input (coax) (i can see that when i hover the mouse over the jacks in "Realtek HD audio manager") Is there any way to make the coaxial port as an output port instead of optical? My my HT reciver has no free optical ports so i have to use coax to get some sound from the computer.
View 9 Replies View RelatedI use a AT&T exspress aircard and can't send mail out through windows mail on Vista. Do I need to change my outgoing mail port from 25 to another port number? If so what port or how do I obtain that info?
View 9 Replies View RelatedI am trying to use a SYBA USB to Parallel Cable to support my Color LaserJet 5 printer underVISTA. I checked SYNA and they stated support for only SPP mode but don't know where to change to SPP mode. Also, is there a special driver to change theinterface from Parallel to USB? I also tried using the installed Manhattan Parallel Port card but the result is always the same - data is loaded into the printer and then disappears without printing and no errors.
View 4 Replies View RelatedHere's another stupid question from yours truely.....me! I have an ancient laptop with Win 95, and my Vista desktop. I also have a parallel to serial cable, male parallel at one end and a female serial at the other end. I had read something about a Direct Cable Connection, but I didn't see certain options that were needed to use it....even then, when I tried to install that service on the laptop, it asked for the Windows install disk, which is long gone..
View 6 Replies View RelatedI am trying to install this printer (HP Laserjet P2015d) on my Vista 64 machine. It works fine on my XP Pro machine. HP has posted drivers for this OS/printer configuration (HP LaserJet P2015 Printer series*-* Download drivers and software - HP Business Support Center).
However, the installation programs does not work. The installation program does not seem to recognize the printer even when the printer is connected and turned on. Ironically the device (occasionally) shows up on the Vista Device manager panel, but not on the printer panel. The installation instruction mentions that the new hardware wizard should pop up on connecting, but it does not.
I contacted HP support (a nightmarish labyrinth of automated messages). After negotiating through this maize for more than 15 minutes, I finally reach a human. Guess what? They want money to fix their own problem! It is hardly a year old.
I can no longer print front to back, looks like I lost the driver that let me do that, the HP drivers and the default don't work. There is an option to print on both sides but nothing happens when I click it. Anyone know the fix?
View 5 Replies View RelatedI have a Toshiba laptop running Vista home basic. I use an HP laserjet 1100 parallel printer which I plug (via a USB-to-parallel converter cable) into a USB hub which feeds into one of the USB ports on my laptop. Very often, when I try to print (Word document, web page, pdf file, anything) nothing happens until I remove the converter cable from the USB hub and then reconnect it. After I have done this, the printer will then work fine from then on, but will then stop working whenever I reboot the computer. If, when I reach the point at which "nothing happens", I remove and rejoin the converter cable from the printer cable, or remove and rejoin the printer cable from the printer, that doesn't solve the problem. And if I have an extension USB cable joining the USB hub to the converter cable, and remove and rejoin the converter cable from the extension cable, that doesn't solve the problem either. The only thing which works is removing the cable from the USB hub and then reinserting it, and this usually works every time. It's not a big problem, but it's irritating to have to scrabble around about the cables. how I might be able to get my printer to start each time without having to fiddle about with the leads?
View 4 Replies View RelatedIf Vista no longer or hasn't been able to install your trusty Laser Jet 1000 printer driver, then you are not alone. The solution is to connect a slower 1.0 USB Hub in between the LaserJet 1000 and Vista. For my particular resolution a Belkin F5U021 USB Hub was the key to success. Once the hub was connected, Vista expeditiously recognized and automatically installed the HP Laser Jet 1000 driver, created for WinXP.....
View 7 Replies View RelatedSetup Vista Ultimate x64. I have the following printer HP color laserjet 2605dn and it won't let me print in duplex mode looked on Hp web site for installation drivers and found nothing, then I found this file EZInstall, but It can't find my printer on the network.
View 6 Replies View RelatedI changed laptops in a docking station and used a drivers CD to install the printer which was attached. Test pages and anything else I try to print goes into the print queue but never prints, finally showing an error. I downloaded the latest drivers from HP and installed them, but this hasn't fixed the problem. The original laptop still prints fine from that docking station. The old laptop was WinXP, this one is Vista. I ran the "FixIt" diagnostics but it said all problems were fixed, and it still won't print.
View 7 Replies View RelatedI now have Vista Home Premium 64bit. My HP Laserjet 1022 prints just fine... BUT it won't let me position the image on the page the way I want it to. Sometimes I have a 16x22-inch image that I need to print full-size--what I've always done in the past (when I had Windows XP) is print it in four different sections. When I would start to print, it would automatically show me how the image was positioned on the page and I could move it around to get it in the right position to print one-quarter at a time. Now it does not give me that option.
View 4 Replies View RelatedI?m trying to install a network printer on a Vista machine. Vista is able to locate the printer on the network but when I select it for installation, for some time, Vista tries to connect and then pops up this message: "Failed Connecting to Printer - Access Denied" And then another window pops up with this message: "Spooler Subsystem Application stopped woring and has been closed." In fact the spooler service always stops, so I have to restart it on the services windows, within Administrative Tools of the Control Panel. The machine is new and has been installed yesterday. Everything else works fine. The printer I am trying to install is on a Windows XP Professional machine within the same network (naturally).
View 9 Replies View RelatedI have a Dell PC with XP Home and a Dell A960 Printer attached to it. I also have a new HP Laptop with Vista premium that has also had the same printer attached to it at times so the drivers are installed on HP laptop. I recently installed a router so I can use laptop wirelessly. That works fine. However, I am unable to print to the host printer wirelessly. I get message saying printer cannot communicate with computer. I tried everything I found on Google searches. I have enabled printer sharing on both. Do I have to make the Workgroup names the same and if so do I change the Dell with XP or the HP with Vista? I changed the Dell once to no avail so I changed back. Do computer names have to be same? I am a novice at networking.
View 6 Replies View RelatedDose anyone knows if they make a printer cable: I received a new lab top and it didn't come with the older printer jack on the computer. I guess I need to use one of the usb ports? My Epson 660 still works I hate the idea of getting a new printer when my old one works.
View 4 Replies View RelatedJust installed Vista SP2. Everything seems to work OK except for my Dell 1720 printer. It now prints an extra page before the actual document to be printed. There are just a few spurious characters printed at the top of this unwanted page. The following "proper" pages are OK. I have, so it seems, the lastest driver available.
View 7 Replies View RelatedI cannot set the default printer in Vista Business with SP1. I am connected to a domain trying to set a network printer hosted from a server as the default printer. I have seen a dozen or more questions similiar to this in this group as well as on other forums and found no answer. I see a MS-MVP come on and tell people to remove local printers such as the XPS and adobe printers. This is a ridiculous solution. Sure it may allow you to connect to a network printer but you have removed printers that you are going to need to use again. Unacceptable.
So far the only other solution that does not include deleting all the local printers off of the machine is to make sure you have write permissions to the default printer registry key. I have checked this and I do have write permissions(Full Control). SO WHAT NEXT? IS MICROSOFT EVER GOING TO COME OUT WITH ANOTHER FIX FOR THIS?
i have installed a printer from my main pc which uses xp pro to my new vista lap top ----- it shows the icon for the printer in the tray but i cannot still print any thing
View 7 Replies View RelatedI just upgraded my XP home edition to Vista home premium with an upgrade disk provided by Dell. Before the upgrade I uninstalled my HP 2575 printer and software because it was listed as a compatibility issue. After upgrade I reinstalled new software from HP for my printer from the HP website. I plugged in the USB cable from my printer. Vista recognized the new device but would not put it in the printer folder in the control panel. Vista did find driver software online but could not install it. The HP solution center tells me no HP devices have been detected. When I try to print I get a message that I don’t have a printer hooked up. That’s the back ground here is what I have done.
I have updated Vista; most were successful some security ones failed. I have Service pack 1 I uninstalled and reinstalled HP software many times I started my spooler and reinstalled printer and software many times. I checked Task Manager and the hpqste08 services are running. I uninstalled virus protection and turned off the firewall. I have done everything I can find at HP, Microsoft and here. I tried to reload Vista but got a Worker Thread Returned at Bad IRQL error message so I stopped reload.
The one odd thing I did find was in the Device Manager. In the Device Manager the HP 2575 is listed twice. Once under IEEE 1284.4 compatible printer and once under Other Devices. When I click on the one under IEEE 1284.4 compatible printer and update driver software it finds the driver and says it’s up to date. When I do the same on the one under Other Devices, windows finds the software for this device but encountered an error when trying to install it. It does this when looking online and when looking in C: drive.The printer still does not show up in the printer folder in the control panel.
I have a Vista Home Premium Laptop, an XP Home laptop and an XP Home desktop (and an XBox 360) connected to my Linksys wireless G router and an XP Home desktop connected via CAT5 to the same router. All connect to the internet fine. The XP laptop finds and uses the printer on the desktop fine. I had setup a share of the Canon I560 printer, connected to my XP desktop, on the Vista laptop and it worked fine. I don't believe I made any changes, but now it won't find the printer and I can't seem to install a new copy.
The Vista machine will not detect the printer and won't even find the XP desktop or laptop on the network. The XP machines find each other fine. All machines get their IP address from the router via DHCP. All are in the same workgroup, or it seems so. Strangely the Vista machine shows WORKGROUP and the XP machines show Workgroup, even if I type the name in caps, XP still shows Workgroup and Vista WORKGROUP.............
I have a Vista Desktop that has a wireless router. I have shared a printer, but I would like my Mac laptop to be able to print to it. Do I install the printer driver on the Mac or on the Vista machine? If I install on the Vista machine, is there a special installer? The printer is an HP DeskJet 2445.
View 4 Replies View Relatedmy son retuned home this weekend with his HP Compaq CQ61 Notebook and told me his dongles, Itouch and stuff dont work? told me his mum had it at a shop and the guy did a restore and couldn't find the problem or fix it? I wonder what kind off shop it was? so i took a look and looks like someone has try'd to put something or FORCE something into USB port? i'v uploaded a pic from silly phone sorry about Quality but u can see that the port on the right is broken? AKA Wont work now the port on the left looks ok, so i try'd to hook up ex HD, Iphone and nothing works ? no power to device and PnP dont find anything new ?
i checked Device Manager and states that Drivers are ok and up to date? so the right one is gone and needs replaced i thought the left one would still work but seems not to ? should it?
I just bought the XFX GeForce 8400 GS from Amazon. I noticed that there is no DVI or VGA port it said DMS-59 on it, what is that and can I run DVI on it? Amazon.com: XFX PVT86SWML4 GeForce 8400GS 256MB GDDR2 DMS-59 Dual DVI Low Profile Monitor Solution PCI Express x16 Video Card: Electronics
View 5 Replies View RelatedI have a HP Color Laser Jet 3600n already installed on the company network. I just got a new gateway with Windows Vista Home Premium 32bit. When i go to the printer wizard it locates the 3600 printer on the network. Then it asks me to choose the printer software from a list. or choose a disk. I don't have the disk. So, looking through this list, it doesn't even have the HP Color Laser Jet 3600 in there. it's got a 3000 and then jumps to 7000.
View 9 Replies View Relatedi have a printer on my old windows xp computer. but i went to hook it up to my vista, obviously the printer is not compatible which sucks. so is there a way i can connect it through a network? i have no idea where to start or what to do first.
View 4 Replies View Related