I am running Windows Live OneCare and the firewall is enabled. The Vista Firewall services are set to automatic, however on bootup the Vista Firewall is turned off. Shouldn't be a problem but whenever the Vista Firewall is disabled I am getting unwanted traiffic on my laptop which the Live OneCare isn't blocking.
View 9 RepliesI am running Vista 64 and installed a program which apparently had a virus or I got it using IE8. I found an entry in the start up tab that was causing a problem. I went into the registry and deleted the item from the startup tab and I also disabled it in the startup tab. The startup tab still shows the item even though it is disabled and deleted from the registry. Why does it still show in MSCONFIG and how do I delete it from the start up entry
View 5 Replies View RelatedI have been using my e-mail for 11 years, sending bulk-mail without any problem. Too many recipients!? The message could not be sent because one of the recipients was rejected by the server. The rejected e-mail address was 'jmzl@bellsouth.net'. Subject 'Re1: ', Account: 'abcsys@ix.netcom.com', Server: 'smtpauth.earthlink.net', Protocol: SMTP, Server Response: '554 Disabled by HIPS Firewall', Port: 587, Secure(SSL): No, Server Error: 554, Error Number: 0x800CCC79 I already spoke with my provider, and nothing have changed with my account to limit the recipients to 50.
View 4 Replies View RelatedWe are running an old CA program for our antivirus here at school. It is called inoculateIT. It has performed well for us, so we've never upgraded to their newer offerings. To install it, you use a remote install program located on the domain controller. I just bought the first Vista computer to try out here and upon trying to install this program, it cannot find the path. When this happened with XP, it was because the Windows firewall was turned on. I have turned it off in Vista and disabled the firewall service, but still get the same message. It shows up in the list of computers in the remote install program's browser just like it does in the active directory list. I just believe it has something to do with the security in Vista that is blocking it.
View 4 Replies View RelatedAfter a long debate with myself, I went ahead and downloaded SP1 for my old system. I had installed a new Logitech camera that was using the Lv? .exe driver or something. Anyway, unplugged the camera and deactivated the Logitech programs in the startup for all users. Installed SP1. Rebooted. Came back after several hours. Re-Attached the USB devices. Everything works. For the moment, I have the Logitech entries still DISABLED in the startup.
View 5 Replies View RelatedEvery boot og Vista Home Premium PC asks for c: disk to be checked. In msconfig I disabled all services and all startup items, but 3 reboots called for disk check each time. I let the disk check run each time. However, if I start in Safe mode, the first start takes a long time (I assume it is doing the disk check) then restarts. From then on, r reboots in safe mode did not ask for a disk check. The first normal reboot after safe mode does not ask for the dsik check. What is my next step in debugging/fixing?
View 8 Replies View Related(not sure ifthis is the right place to post it)but i have zonealarm and i recently (last night) reinstalled Vista also im noticing and tremendous increase in startup time from my pc just by running 1 core not all four! if this is the problem can anyone tell me another really good firewall that doesnt make it startup so slow
View 8 Replies View RelatedI am using Vista ultimate with a new Canon LBP2900I laser printer. If I print with the windows firewall turned on it takes an age ti get a print out, if I turn off the firewall it prints stright away. All the drivers are up to date. In the firewall exceptions the printer is listed and ticked
View 9 Replies View RelatedWindows Vista Basic sp1. Im using a 3rd party firewall program. In Administrative Tools---Services it shows Windows Firewall status as Started. But, in Security Center it shows my 3rd party firewall being On but Windows Firewall being off. Also, in Administrative Tools---Windows Firewall with Advanced Security is showing Windows Firewall being on in Domain Profile. Is this normal? Why would one show Windows Firewall as On and another show it as Off?
View 9 Replies View RelatedMy firewall gives me this error message when i try to set it on. "Windows cannot start the Windows Firewall service." I have just installed SP1 but the problem started before that.
View 9 Replies View RelatedI have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and
comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
The last couple of days I had a few times a startup error. It said something like Windows couldn't start normally. Run Startup Recovery (Recommended) Start Windows Normally. I did the Startup Recovery and then it worked again but the next day or so the same thing, otherwise my system runs fine.
View 9 Replies View RelatedI have just added a new router on my computer. I am still having trouble with a laptop upstairs. On the laptop utility card it says encryption disabled. Is this a problem with my computer or their laptop? If it is what can I do? I just had my system crash and had it fixed at Future Shop. Everything works fine but the upstairs computer.
View 7 Replies View RelatedThe wife has her Vista 64bit box which uses dial up set NOT to check for and automatically DL updates because it is not online always plus user account controls are turned off. Updates are installed every couple days when available while she is at work by me. Because these are disabled pop-ups keep appearing about checking setting and such when I know what the setting are!! Is there a way to keep these notification pop-ups from coming up?
Evertime these things come up the wife gets all paranoid and is calling me to come check because the thing crashed once and now the warning pop-ups or whatever are getting her all bent out of shape even though I tell her to ignore them and they will go away. We know what the settings are and do not need the stupid pop-ups telling us that something is not set the way the damn system thinks it should be!
i recently bought a laptop which was on display in Comet in the UK. After having the laptop for a short time i noticed that certain items were disabled, such as the function Alt-F4, when you try and use it, it says the admin has disabled the feature which confuses me as i'm the Admin... and also when you go to the start menu and click the arrow next to the lock key, restart and shut down are not there as was expected. The only way to shut down is by logging out and doing it from there, i thought this was possible from the normal screen?
View 6 Replies View RelatedA friend of mine gave me a his HP notebook which recently developed a serious problem. It's an HP Pavilion DV6305 that uses an Nvida chipset and AMD cpu and runs Vista Home Basic. When he first bought it, I set it up for him with Eset's Nod32 anti-virus. The problem appears to be that at least 10 devices appear to be unable to load the associated device driver and in each case (looking in device manager) the error message appears to be: Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (code 39)Googling on this error only turned up dozens of references to people having this problem with their CD / DVD drive but nothing like what is going on here.
Of course my first suspicion was a virus, since this seems to be the case with so many people having problems these days. I scanned with the installed Nod32 V4.0.x and it didn't find anything. Of course not that that completely rules out a virus. Next I tried running a disk test on the boot drive with both "Automatically fix file system errors" and "Scan for and attempt recovery of bad sectors" and the system log seems to indicate that the hard drive is clean with no problems.
The devices that are disabled include both the Ethernet and wireless controllers, the USB controllers, the HP quick Launch Buttons, the audio controller, etc. The only way to get files onto the machine is by burning them onto CD, since the CD / DVD drive is one of the few devices that appears to be working. I've tried downloading drivers for the Nvidia chipset and networking controllers, putting them on a cd and trying to reinstall them but while the installation appears to complete without errors on reboot the device still doesn't work properly. Does anyone have any ideas what I could do to fix this problem? If this is a virus, any ideas on how to remove it since the installed scanner can't detect it?
I have just bought a HP notebook which has Vista Home premium 32bit O/S with Service pack 1. I tried upgrading this to Vista Ultimate with the Upgrade DVD. After entering the product key, I opted for the upgrade, after a while a message came up saying that the upgrading is disabled. I read somewhere that this trouble might have been caused by SP 1. So, one has to delete the SP1 and then upgrade. I looked into the add/remove programmes in the control panel, but there is no SP1 in the list.
View 4 Replies View RelatedMy friend recently installed some software, which was conflicting with Vista's UAC. Then a couple of days ago, I had a security alert prompting me to check my settings. Everything seemed fine except UAC was turned off. I turned it back on and restarted, it didn't appear. Then the next day it appeared. I can activate it - so it says it is on, but then once my computer is restarted it turns off.
View 4 Replies View RelatedAccording to the specs of this maching it already has vista 64bit. So I thought I just needed the upgrade. When I put the disc in to upgrade it, it went funny kept restarting itself and told me there was an error and it couldn't complete the upgrade. Upgrade was then disabled.
View 4 Replies View RelatedI have been using bitlocker on a Sony Vaio - with TPM. Yesterday someone used my PC to check an XP installation CD. They booted from the CD and when they reached the setup screen, they exited. After that I had to enter my key as I booted the PC - indicating that bitlocker had detected a change. The way to stop having to do that is to turn bitlocker off and then on again.I turned bitlocker off, but when I went to turn it one again, it tells me that my system is not configured to use Bitlocker. It tells me to remove any bootable CD or DVD and reboot and if that doesn't help to upgrade my BIOS. There are no CDs or DVDs and my BIOS is the latest version - and was working yesterday with Bitlocker. I am assuming that the XP instalation CD has in some way altered my disk drive so that it no longer appears to be configured to use Bitlocker. I have run the Drive Preparation Tool,
View 4 Replies View RelatedAfter using perfmon to determine what applications were hogging my internet connection at 2am every morning I found that AeLookupSvc and Appinfo were the culprits. After looking up what they did and deciding that it would be ok to disable them (!!) I did so, and now any activity that requires administrative privileges either does not respond, or returns the error "C:Windowssystem32services.msc The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. Perfmon, services.msc, windows firewall, system restore, accessing my registry, none of it works. I can still run programs and serf the net, but anything that needs admin priv will not work. I guess what I need is some kind of workaround, I need to enable Appinfo without administrator privileges so I can get my administrator privileges back. Thanks for any help you can provide, Tim **SKIP the FOLLOWING if you just want to help for said issue** Now time for the RANT: Jesus I have never been so frustrated! I have never had a prolonged experience with something so clunky, so ridiculous, and coming highly touted from one of the largest corporations on the planet! This is only one (and the worst) of the many problems I've had. While playing warcraft I'll suffer from framerate issues with a powerful dual core until the cpu's decide "hey, he's got 6 fps, lets stop whatever we were doing and help him out" and my framerates will jump to 60. I spent an hour in the registry working on my latency issues, I spent 30 minutes in the registry fixing a fallout 3 console problem, svchost will decide to go surf the net in the middle of me doing something myself and lag the crap out of me. My computer has a mind of its own and rarely is it doing something I want to do too! If windows vista wiped my a$$ it would be a 47 step process and have to stop and ask my permission to ask my permission. I went to microsoft support for help, entered in my product i.d. in order to determine if I could get support help WITHOUT having to PAY $49, and it told me the number was for vista home premium 64 bit instead of the 32 bit I selected, well, ok, I went back and changed the option to 64 bit, re-entered the SAME exact i.d., it gave me a product i.d. format error......the same, copy/pasted i.d..... I went and did it two more times both ways including opening a new browser window laughing my ass off!!! Way to go microsoft! Your $230 billion dollar organization wants $49 from me to help me with your problems! I'm so glad I was so frustrated I laughed, otherwise my laptop would have traveled through the wall. ( I know, anger issues, but can you blame me?!?!) There's some more I could write if you're still reading, but my finger's are getting cold, I haven't typed this much since my senior design project.
View 9 Replies View RelatedIn order to use another microphone, I disabled the webcam microphone. Now the icon for the webcam mike does not appear, in the recording devices. How do I reenable the webcam microphone?
View 9 Replies View Relatedi was connected to the internet at uni and i went to the network and internet thing and noticed i was connected to 2 networks, i then disabled one of the networks that i was connected to by accident and am unable to connect to the internet now. i have tried to find out how to enable that network connection that i disabled but am unable to find out how to, please can you help me fix it so i can connect to the internet.
View 5 Replies View RelatedOk this is not the same problem as the security centre cant be started issue. I can start thee service by going into services setting it to automatic stat up and clicking start service.
My problem is it after i click ok and go out of the properties box the security center start up gets set to disabled again. No matter what i do i cant set it to automatic/automatic(delayed start) and every time i start the pc i have to go into services and enable it manually. its highly irritating.
I'm running Vista Home Premium 64 bit and installed an Nvidia GeForce 9800 GT graphics card. I installed the current drivers but can't get Call of Duty World At War or FarCry 2 to run. I ran dxdiag, under the display tab I see the following:
DirectDraw Acceleration: Enabled
Direct3D Acceleration: Disabled
AGP Texture Acceleration: Enabled
When I run the 64 bit DxDiag,iIt tells me that all 3 are enabled. I also ran the System Requirements Lab Analysis on the NVIDIA site and it reported that I don`t have Video Card 3D Acceleration or Video HW Transform + Lighting. I had the card checked and it is working fine.
I can't seem to turn on Aero in the display properties menu at all.
View 6 Replies View RelatedI recently generated a system health report with my vista 64 bit system. In this report it told me that there was a problem with my pcouffin device. It said that it was disabled. It tells me go into device manager and either update the drivers or uninstall the device, if I am no longer using it. I looked in the device manager and was anable to locate this device. Did some fishing around and other people are saying that pcouffin has something to do with DVD burning software. I uninstalled
all DVD burning sofware on my computer but I still have this problem.
I am having an issue with seeing the computers I have networked together. All together there are five computers. All of them show in the network map on all of the computers. I have disabled the password, enabled the network locating (file sharing, etc...), and checked the TCP settings. The following are what I have found: 1) The 3 computers that talk see all 5 computers, but when you try to get into one of the two that don't talk it tells you that the network path is invalid. 2) If I try to ping the two computers that won't talk from any of the 3 computers that are talking my request is timed out. 3) If I go to view computers and devices on the two that don't talk only the three that are talking show up. If I go to view computers and devices on the three that are talking all 5 are there. However, If i try to open either of the two computers that aren't talking it tells me the network path is invalid. I need to get these two computers to comunicate with each other and with the three other computers.
View 6 Replies View RelatedUnder Vista, when I want to use the "SEND" option of WORD or other OFFICE apps, the only active options I have is to SAVE the email, the SEND function is disabled. Is there a way of making the SEND function active within these apps or is this just another function that vista doesn't emulate - as it did in every other os preceding it?
View 8 Replies View RelatedFor some reason the Task Manager has been disabled. How do I turn it back on in Vista?
View 6 Replies View RelatedI accidentally disabled my speakers and headphones in Vista Home Premium. I tried to enable them, they aren't even listed in sound devices. I'm on a HP G60 laptop. I went to control panel, clicked on sounds. Then i got a window with 3 tabs but no speakers or headphones anywhere. The volume icon says there's no sound device installed. I'm about to freak out!
View 4 Replies View Related