I want to use 'Windows Easy Transfer' wizard to transfer solely emails and contacts from XP OE6 to Vista Home.
a) Can I pick this alone, with the wizard ?
b) If Yes, How ? -- I don't find a choice to transfer only emails and address book.
c) If No, what is the alternative ?
I am attempting to transfer files & settings using the Belkin Easy Transfer cable from an XP computer to a Vista computer. All starts well by showing that the two computers are connected. But after finding the files and settings and providing the amount of data to be transferred, it starts gathering information but then shows a flashing disconnection icon in the upper right of both computers' transfer windows and freezes. This happens at a different place each time, but early in the procedure (after about 10 minutes). Would anyone have any advice? I have done everything by the book, as far as I'm aware.
View 7 Replies View Relatedthe instructions for both the cable and Windows Easy Transfer program are practically non-existant. The directions for the cable said to install the software onto the XP machine (easy enough), and then connect the two computers with the cable, again, very simple. Then I was to follow the on screen instructions.
Instructions were as follows: "Windows automatically detects the connection". That's it, no buttons to click, nothing to type in, no load screen, no scan, nothing. So I waited... and waited... and waited. Nothing happened. So I unhooked the cable, disconnected both computers from the internet, disabled any and all firewalls, spyware software, antivirus software, anything that could possibly interfere with the connection. And I tried again... and again... and again. Not Happy, not simple, not easy! Am I doing something wrong? Did I miss a step? Or is Vista really the problem everyone has been proclaiming it?
I'm running Vista Home Premium on a 2 month old HP. There are 3 harddrives --- the original one from HP, the old one from my old computer(both internal), and a drive that is external, connected via USB, thatI use to hold my backup disk image files.For a few weeks, no problem. Lately, every time I double click on theexternal drive in Windows Explorer, Windows Easy Transfer startsrunning. If I right-click instead and then click on "Open", there'sno problem (Easy Transfer does not open). Any ideas on how to stop this unwanted loading of Easy Transfer?
View 9 Replies View RelatedLast week I upgraded a HPxw4400X workstation from WinXP Pro w/SP3 to Vista Business. I did a full backup and also used FAST (files and settings transfer wizard). However, I soon found out that the DVD drive was "broke". HP told me it was because of the upgrade. They said to do a fresh install. Did another backup, fresh install, then a restore. Had lots of problems with BSOD, but a selective restore got it working again. But he can't see MS Office, nor navigate to it. I can see it when logged in as an admin. I thought of copying files and folders between profiles (he has 3 of 'em - , ., and ..000). The former is the oldest so I thought I could copy the App Data and User Data over it'd work (in both Documents and Settings, and Users), but it didn't work. I've been here working on various issues for 28 hours, so I'm not thinking as clearly as I'd like.
View 9 Replies View RelatedI bought a new Vista laptop about 3 months ago and have only got around to transferring stuff from my old XP pc just now. I decided to use Windows Easy Transfer and for the most part it was easy except for Outlook. It seems to have replaced my existing Outlook 2003 OST files with those from my old pc (also Outlook 2003) - does this mean that I have lost the last 3 months of emails or is the file I am missing been transferred somewhere that I can't see anymore. When I try to access local settings the UAC tells me that I don't have permission?
View 5 Replies View RelatedI have gone back to Vista after using Win 7. I used Windows Easy Transfer (WET)and loaded up an external drive. I found that Vista SP2 seems to have a slightly different WET gui and have not been able to xfer any data at all. I can get to the point of selecting path and password but then cannot get a path that the Vista version of WET will recongnize even though it shows up and can be selected the WET that is on the external drive. Went back to Vista to get ready for the release of the retail version of 7 and did not want to mess with the RC and eventual clean install next year.
View 7 Replies View RelatedI bought my wife a new Vista Home Premium notebook to replace her old XP one. When I used the Easy Transfer prg and the Companion, everything worked EXCEPT that her profile from the XP machine was created on the Vista one. By that I mean the Admin Profile on the XP was Nancy. The Admin on the Vista one was also named Nancy. Yet when the Easy Transfer happened, it created a second Nancy profile. One that had what I wanted to be in th enew one's Admin profile.
View 5 Replies View RelatedWhen I use Windows Easy Transfer am I removing the files from the old computer and putting them on the new one? Or am I just copying the files on the old and putting new copies on the new computer?
View 6 Replies View RelatedWill Windows Easy Transfer work with only XP? I'm getting a new laptop before my old one stops working and I don't want to move to Vista. I just want to move XP pro to XP pro.
View 6 Replies View RelatedI am trying to use Windows Easy Transfer to transfer documents and settings from a Window XP machine to a new Vista Professional machine. I am trying to do this over our network (SBS2003 if that's relevant). Windows Easy Transfer seems to be working fine to a point, but then it gets stuck on a particular file (on the XP machine) and doesn't continue. A flashing icon appears near the top right, but there are no options to skip a file or anything like that. I have tried deleting what I believed was the offending file, only to have WET stop on a different file. If there was a way to skip a problem file, that would be great, but the only time I see a prompt suggesting that I can do that is after I have already cancelled the transfer (on the XP machine).
View 4 Replies View Relatedi recently bought a new computer, its running Vista (64 bit) Home Premium, and when i first got it i attempted to do an "Easy Transfer" from my old laptop to this new desktop (the laptop was running Vista Home Premium ((32 bit i believe)), not sure if this may have anything to do with the problem)... but anyway, after the Easy Transfer was done, after shutting off my pc and restarting it, upon the windows startup screen the message "incorrect password" pops up first thing before i even try to type in any password o.O ... my pc is secured with a password and if i click ok and then type in the password it works fine, but at start up now every single time the first thing i see is "incorrect password" regardless of the fact that i havnt tried typing in the password yet, and like i said, if i just click ok and type in the password it works fine, so this problem hasnt really been bothering me that much, but i do find it quite odd and was wondering if anyone knew what this could be caused from (its the least of my problems with Vista 64 bit so far btw -_-) .... but yea, ive never seen a vista system show the "incorrect password" message before you even attempt to type the password in at startup haha...
View 4 Replies View RelatedI asked the following question in the XP help and support NG, but they told me to come here instead. I transferred what files I needed from my older XP PC to a new Vista machine. Now whenever I boot up my XP PC, the XP PC opens up a folder onto the desktop called "Microsoft" which has another folder in it called "MigWiz". I can click it closed, but it is a pain to have to do every time I turn that computer on. I tried to locate the program name running msconfig.exe, but could not findit in particular. I also went to "Add/Remove Programs...", found the program, but said that certain other programs I have would/could possibly not run right if I removed the Easy Transfer application...one of which is UPnP. Is there another way to remove the Easy transfer program? Perhaps reverting to an earlier system restore point?
View 4 Replies View Related1. On my old laptop (Windows XP) I first used MS Office 2003, I then installed MS Office 2007 Student and Home. Before uninstalling Office 2003 I stored some Outlook pst-files (e-mail, contacts and archive files). How can I import these files into Windows Mail/Contacts on my new laptop (Windows Vista/MS Office 2007 H&S). I tried Windows Easy Transfer, but it didn't work.
2. How can I import Mozilla Thunderbird files (e-mail, contacts) from the old laptop into Windows Mail/Contacts on the new one? The wizzard does not give the opportunity to select Thunderbird files.
If I decide to upgrade to Win 7 and do a clean install, could I use Easy File Transfer to retain my Outlook, Web Settings and Files? I have two internal hard drives, not raid, and an external eSATA drive. All 3 are the same size, 500GB. So I think I have the resources, I just don't want to lose data, favorites, contacts, files or emails. Having never used Easy File Transfer, how should I proceed? Store my easy transfere to my second HD "D", format C, install Win 7? I guess I need to buy a version of Win 7 that will read my Vista Easy File backup...duh... Is Win 7 Pro able to read Vista Easy File Transfers? I have two accounts on this computer, mine and my wife's, so there another issue too.
View 4 Replies View RelatedAfter I started windows 7 easy transfer on Vista Home Premium 32 bit, it runs for a while, then says "please reboot your PC and try again". Rebooted a few times and still get the same error. I got tried chkdsk at reboot time and 'Repair your computer' using vista DVD instal disk.
View 6 Replies View RelatedI got it for my XP Desktop computer, and on my Vista laptop... Ive tried to send files, and it finds and recognizes the files i want to send... but when go to transfer them, hte flashes the disconnected sign near the exit button. This is after about 30 seconds into it aswell.
View 4 Replies View RelatedI want to transfer all data from my main computer to a standby computer (without losing the data on the main computer) and then to synchronize them both on a daily/weekly basis, both with OS Win.Vista Business. I am advised by Belkin that their Easy Transfer Cable for Windows Vista is not 100% reliable for this purpose and they do not have a cable or software to do this job.
View 4 Replies View RelatedThis is probably a very simple question, transferring from xp to vista using easy transfer, over the years theres been a lot of stuff duplicated and deleted on my xp machine. I believe all these deleted copies and all the other deleted stuff stays on the computer, just not visible. Does esay transfer transfer all this deleted stuff as well,and if so is there anything special I should do to my xp machine to stop these copying. Don't want to fill the vista before i've used it with deleted stuff.
View 9 Replies View RelatedRecently I have run some registry programs like RegCure, Registry Mechanic, CCleaner, etc and I'm not sure if it affects my system.
1) Most of my programs in the Start menu are missing. Below are some of the examples:
a) Under "Accessories", I can only see Bluetooth File Transfer Wizard, Command Prompt and Run.
b) Under "Games", I can only see Game Explorer
c) Many programs shortcut like Window Defender, etc are missing.
d) I still do not know what else are missing.
2) Windows take some time to shut down and startup and also running of programs...........
I've just upgraded to a new pc with vista and windows mail from Xp & outlook express (with virgin). To save my files and emails etc I used windows easy transfer software and copied the files to an external hard drive and then loaded it to the new PC. I initially had problems as my modem didn't install but virgin sent me a wireless connector and all seemed OK. However, when I click on send/receive mail I get an error message 'some errors occured while processing the requsted tasks - please see details below.' But there are no details! I have 3 email addresses.
If I click on the little arrow next to send/rec and then click on each email separately there is no problem. Equally, if I click on 'receive all' there is no problem. When I click on send/rec the first time I open windows mail there is no problem, but thereafter always the error message. I've had Virgin remotely controlling the pc for 90 minutes and they can't suss it!
Also, bizarrely at the top of the page it says inbox - outlook express provided by virgin net even though I appear to be running windows mail (it certainly isn't the usual outlook I have on my old pc). Did I inadvertently load outlook as well as my emails on top of windows mail and they've kind of merged?
I have a customer with two Vista 64 bits home editions trying to run software that explicitly states its does not work with 64 bit Vista. Oh, what a mess! Question: if I switch her to 32 bit W7 Pro, will Vista's "windows easy transfer" data file work with the transition from 64 bit Vista home to 32 bit W7 Pro?
View 7 Replies View Relatedthe xp scanner and camer wizard and i cant get my head around the new vista photo gallery & automatic scanner. all i want to be able to do is once i scan in a photo, is resize it to fit te page, but i cant seem to do this with vista - the xp scanner had a preview button which you could then just click to fit the screen
View 5 Replies View RelatedI am trying to get a Vista Laptop to print to a XP desktop. It appears instead of setting it up as a network printer, I install as local printer and use UNC naming(\computernameprintername) to connect to the printer.
The problem I have it that Vista isn't consistent in it's add a printer wizard or there is something wrong with this laptop.
On my Vista Ultimate when I go to add a printer I get a list of manufactures and models. On this laptop with Vista Business, the wizard looks the same but never shows the list of manufactures or models. I have a choice of 'window update' or 'have disk'. Since there is no disk for an HP printer for Vista I choose 'window update', but it only has 5 Deskjet printers and none are the one I have (920c). I have installed two of the drives from this location and can get the printer to send a blank piece of paper (which
is good, it shows I have the connection to the network printer), I just have the wrong driver.
1. Tell me if this will work. Install the printer locally, then try the local port to connect to the printer and let it use the drivers it used to install it locally?
OR
2. Insert my Vista Ultimate DVD when it asks if I have the disk and make it search the DVD for the driver. I guess I could do the same with the current install as the drivers have to be there somewhere.
I have been trying to play 1602ad on Windows Vista and it needs to be run in 256 color mode. I have run the compatiblity wizard like everyone has told me to and it doesn't change anything. I have even gone straight to the application and told it to run in 256 mode and nothing happens game still won't work. Is there a driver or something I can download to get my monitor to display in 256. I have and generic PnP monitor.
View 4 Replies View RelatedAfter I upgraded my notebook to Vista from XP, I cannot add printers to the system. Before install, all printers where listed, but after install, nothing. Not even the document printer from MS Office. When I try to add my network printer, I get a "Local Print Spooler not started" message and when I manullay start that service, i receive an "error 0x000006be" when I try to re-install my network printer. I know that it is not a printer driver issue. Does any one have any fixes or know where I can find a fix. Cannot find anything in the MS Knowledgebases.
View 4 Replies View RelatedUntil recently, my scanner & camera wizard worked fine when I plugged in my memory card reader. Then it just stopped appearing when I plugged in the device. It just doesn't appear. I have seen other posts about changing registry entries, but I didn't want to mess with that until I was sure. How to I fix this so the scanner & camera wizard will autoplay?
View 5 Replies View RelatedAfter I install Gears of War I get a "Instullation wizard has stopped running and my start up code has been modifed. When I go the the main menu O the game and press play I am stoped and a message pops up that says it can not be played on a modifed code.
View 4 Replies View RelatedMy Vista Ultimate box will not recognize the Xbox 360 as a Media Center Extender. I do see the Xbox 360 in my network devices, but i do not see the install option. Additionally, it will not find the Xbox through the Extnder wizard in Media Center. I have network discovery, file sharing and media sharing enabled. However, i am able to UPNP share via Windows Media Player.
View 4 Replies View RelatedON SUNDAY MARCH 2ND I DECIDED TO REINSTALL VISTA HOME PREMIUM BECAUSE ICOULDN'T GET WINDOWS MEDIA CENTER TO WORK. AFTERWARDS, WHEN I PLUGGED INMY SEAGATE EXTERNAL HARD DRIVE AND TRIED TO USE THE BACKUP WIZARD I SAW THIS MESSAGE: -"THE DISK CONTAINING THE
BACKUP IS NOT ACCESSIBLE. PLEASE MAKE SURE IT IS TURNED ON AND CONNECTED TO THE COMPUTER." -I PANICKED AT FIRST BECAUSE I THOUGHT THIS MEANT THAT I WOULD NOT BE ABLE TO ACCESS THE FILES ON MY SEAGATE, BUT I REMEMBERED THAT I COULD GO THE LONG WAY BY GOING THROUGH WINDOWS EXPLORER AND CLICKING ON FOLDER AFTER FOLDER AFTER FOLDER, ETC. I WOULD
RATHER NOT HAVE TO DO THIS, ESPECIALLY SINCE ALL I'M LOOKING FOR IS JUST-ONE -FOLDER!
My wife's laptop, running vista home basic, only came with works word processor loaded, and cannot open docx files. Although I put zamzar on her favourites it can, when busy, take time to get the link, so I am after some freeware to convert and/or view the file.I don't think she is fussed about being able to edit it. Can anyone recommend something?Although she only needs a very basic wp I was thinking about downloading openoffice for her, as I noticed in my searches that it had a file converter wizard- will that handle docx?
View 6 Replies View Related