DVD Maker Hangs "unspecified Error"
Dec 15, 2008
I opened up Movie Maker and started adding to the storyboard both video clips and pictures. I joined the pics and clips with transitions. On completion i clicked on publish to DVD, and then DVD Maker started up and commenced encoding. Now this is were the trouble starts. The encoding gets to 64% and then hangs there and doesnot continue on, after about 40minutes I get another box reading "unspecified error".
To try and fix the problem i have removed each file, one at a time from my project, to try and determine if there is a bad file. After 5-6 hours of removing 1 file at a time ,saving project, and then again selecting publish to DvD and watching DVD Maker get to about 64% and stop. This didnt fix the problem. I then removed all transitions, This didnot work . Same problem appears. But now A Box comes up and I get "Catastrophic error"
View 8 Replies
ADVERTISEMENT
Jul 28, 2008
I'm using Home Premium x64. I can see my XP machines on my home network and access their public folders; however, they can see my Vista machine but not the public folders (the window is blank). When I try to turn on Public Folder Sharing in Vista I receive an "Unspecified error" box. Network Discovery and File Sharing are ON.
View 3 Replies
View Related
Mar 23, 2008
I have premium vista and i've used movie maker to create a film containing only video. when i try and encode it to wmv (dvd quality) it starts ok then just hangs half way though encoding. So I tried to burn it to DVD instead - DVD maker opens and I made a menu then clicked burn. It starts and makes one pass of the encoding progress bar. It then returns to zero and says buring and goes to 0.6% before stopping there. Both applications are running in task manager and respond to minimize/maximise/close etc without problems. my cpu use is low and I have free ram. I have tried different media and slowing down the burn speed, all to no result.
View 5 Replies
View Related
Mar 23, 2008
When i open the Movie Maker, I get a General Access denied error. How can I solve this to open the Movie Maker?
View 6 Replies
View Related
Mar 23, 2008
I keep getting the "Program has stopped working" message with either of these programs. I have cleared all 3rd party drivers in the "Compatability" section. I have a recollection that Nero 7 can interfere with these programmes, but cannot find the article in the Discussion Group I cannot find any details regarding constant crashing of the program anywhere. I am running on Vista SP1
View 9 Replies
View Related
Aug 14, 2008
When I begin installng physx every thing goes ok, but when it is about to finish. Translating things that is not in english: Error 1935. Error when installing assembly. OR "Error when trying to install assembly" Last LINE: "Contact help and suport for more information"
View 9 Replies
View Related
Feb 5, 2008
I just purchased a Toshiba A205-7464 laptop before Christmas and have been having a problem lately with the wireless internet hanging on me.
I will be online for a certain period of time, sometimes hours, sometimes 10 minutes. I will try to go to a website, not always the same one, and IE will just hang, no graphics will come up, the green bar just stops halfway through and it just hangs. I get no error page or anything but in order to get it working again, I have to reboot. It is really starting to tick me off because it is starting to happen more frequently. I have uninstalled McAfee and installed my own Security Software (CA Suite).
Here are some stats on my PC:...
View 3 Replies
View Related
Oct 23, 2008
I have built up a new system...been running perfectly since August 2008.
2 nights ago I had just finished an update to itunes and some other apple software which required a restart. Upon restart, the system hung while booting.didn't get to the user account log-in screen.it froze with a blackscreen with the mouse cursor sitting there in the middle.
I have done the following things and observed the following behaviour:I have not added any hardware to the system Windows Update has doing automatic updates the systems boots and runs perfectly in safe mode with networking I have reverted to a couple of different restore points prior to installing the apple software...no change I have disabled all non-Microsoft software from starting up via Windows Defender...no change I can get the system to boot to where it displays the user accounts login screen. When I click on an account and enter the password it will hang at that point. Mouse continues to respond but no further response. Disk drive light goes solid but no sound of the disk operating If at the user account log in screen I select to shut the system down it will hang during shutdown checking the event logs shows a range of various fatal errors.I can provide more info on this at later posts if needed but the messages look quite similar to other posts given for a range of different behaviours so I am not sure which if any are relevant. Booting to the Vista CD and doing a repair found no errors. In short, my perfectly happy and functioning system has suddenly gone mental for no obvious reason.
View 9 Replies
View Related
Feb 10, 2010
I have a recurring problem in that my computer randomly will freeze and become non responsive(though I can move the mouse during these freezes). When clicking on a link or trying to view an e-mail I get the message "Not Responsive" as I watch the Windows "circle" rotate in the middle of the screen. Usually within 15 seconds to a minute the computer again returns to usable state. It used to happen only in Windows Mail. But about two weeks ago it started happening when using other programs, IE, Firefox, etc.
My system specs are as follows:
Dell Dimension E521
Vista Home Premium 32 bit
AMD Athlon 64 X2 Dual Core Processor 3800+ 2GHz
2GB Dual Channel DDR2 SDRAM at 533MHz- 2DIMMs
256MB NVIDIA Geforce 7300LE TurboCache
Integrated 7.1 Channel Audio
Optiquest 19" widescreen lcd 1280 x 768
250GB Serial ATA Hard Drive (7200RPM) w/DataBurst Cache™
Tower
Dell USB Keyboard and Dell 2-button Scroll Mouse
DSL 3.0 Mbps down 384 Kbps up
To this point I worked with Dell support to try to solve the problem. After doing a disk cleanup, removing temp files, etc. that didn't fix it, they had me perform a restore to Factory Settings. However even after doing that and reinstalling my programs and data files, the problem persists. I have tried opening Windows in safe mode and the problem doesn't occur then. BTW, there are no error messages when this occurs.
View 9 Replies
View Related
Oct 18, 2008
When Dreamscape is running, Vista will periodically hard hang (will not respond to any input except hardware reset).
On reboot all desktop dispay setting are trashed.
Vista is UFAPP
(Useless For Any Practical Purpose)
View 9 Replies
View Related
Jun 10, 2009
Good Evening / Morning / Other
I have a PC running Vista x64 specs-
MB Asus P5VD2-VM
CPU Core 2 Duo 6700
GPU BFG Nvidia 8600GTS
HD Seagate 500GB Sata
RAM 4 GB DDR2 (System only uses 3GB due to chipset lacking memory remap)
For the past year its been occasionally hanging at random - sometimes repeatedly each day, othertimes once every few days. I have run ram tests and its found nothing. Its not overheatring. The only other thing I can think of is the hard drive when I run seagates tools it cant complete the long tests but it does the short test - can anyone thing of any other diagnostics I can try.
View 9 Replies
View Related
Aug 25, 2009
Im running vista 64bit home premium on my acer desktop. Its been absolutly fine until today. I uninstalled a game and suddenly...well.. every time I close any application the system hangs up/stalls..the cursor goes into 'wait' mode and I can't do anything, the windows key does nothing, etc. Task manager does come up after cntrl/alt/dlt, but it wont do anything - the cursor won't even close it. If Im in a game and tab out, the same thing happens. Sometimes it happens once Ive booted. The desktop pic may be there but the desktop icons wont be...If I go to the menu screen and hit log off then suddenly things happen as they should, but the machine, naturally, logs off. Ive run a virus scan using avast, but it found nothing.
View 8 Replies
View Related
Mar 23, 2008
I just bought parts for a new computer, today i finished putting together, now when I try to install Vista, it hangs at the 'loading files....' screen. I've tried installing XP Pro too, and it gives me a STOP C0000221' Unknown Hard Error' after it copies all the files, and tries to start the installation.
View 7 Replies
View Related
Mar 23, 2008
I can start the install fine, let it run to expand files et al, and then it needs to reboot. Thats where the problem starts. My comp reboots all ok until I get the message "Press a key to boot from CD/DVD or something similar, and then it hangs. Forever!
View 7 Replies
View Related
Jan 31, 2008
So this is the first issue I've really had with this. I try to uninstall the current SP1 to install the new refresh and this is what happens. All goes well until stage 3. Stage 3 gets to 74-75% and "hangs". When I say hangs... it does progress... SLOOOOOWLLLLYYY. Eventually its gets to about 85% then jumps to 100% and eventually says "uninstall has failed" and reverts changes. It's 11:30pm right now. I started the uninstall at ~6:15pm. Between it going slowly and then reverting the changes, thats how long it took. Tried this twice so far, both with the same result. I previously uninstalled a different version of the SP, no issues.
View 6 Replies
View Related
Mar 27, 2008
My Vista very often hangs, usually on shutdown. I have to pull the plug. Will this damage my laptop if I keep doing it? I have to though cos its hung. Problem Reports and Solutions is useless of course it doesnt specify anything. If it wont damage the laptop then I can just keep pulling the plug when it happens.
View 6 Replies
View Related
Dec 30, 2008
I've been having major troubles getting my Vista 64-bit box to start up reliably.
Symptoms: During startup my Vista 64-bit machine unexpectedly "powers off" and the power button, reset button, and power switch stop working until I unplug the power cable on the back and plug it back in.
Workaround: If I boot into safe mode first, I can usually reboot back into Windows normally.
Triggers: This doesn't happen every time, although usually after Windows Update forces me to reboot it will happen. There was a power outage today and it took several reboots and unplugging the computer to get it to boot again afterwards.
Other issues: Lately when I try to put Vista to sleep, it doesn't always go into low power mode and seems to just leave everything on. Sometimes it never sleeps and goes back to the login screen immediately.
When the system dies, it usually makes this high-pitched whining noise just beforehand that I think may be the CPU - this noise happens on every boot, whether successful or not, but might be a clue about what triggers the power-off.
View 7 Replies
View Related
Dec 18, 2009
A friends relatively new Dell laptop running Vista Ultimate SP1 32bit. Downloaded SP2, but has hung for 3 hours at the "installing Service Pack 2 stage 3 of 3 - 92% complete. Do not turn off or unplug your Computer" stage. I had disabled all anti-virus and firewalling software.
I am told by friend that this is what happened when he first tried to install SP2, though he DID get through to 100% complete, before message popped up that installation failed and that his lappie would be rolled back to last good SP1 configuration. I have tried the wuauserv net stop bits net start bits repair.bat file that I read about elsewhere. His wife's exact same laptop (bought at same time, same configuration, same updates installed) installed SP2 no problems.
View 4 Replies
View Related
Oct 22, 2009
When I try to download a number of emails ore large emails, vist mail will process about 3/4 of them and then just hangs and can not down load any more.
View 4 Replies
View Related
Mar 23, 2008
my computer hangs and doesn't came back even after 2 hours and it happens when i'm doing anything. it has hung twice just tring to write this question it hangs even when the computer is idle. and the only solution that works so far is to hit the reset button. if it helps here are my spec for my computer: Q6600, p35c-ds3r, gigabyte 8800gts, 4x kingston 1066MHz 1gig RAM, seagate 7200rpm 750GB hard drive. also have 3 fans keeping to cool 1 for CPU + 2 for case, none are overclocked.
View 4 Replies
View Related
Jun 23, 2009
Hanging up again and again.
View 0 Replies
View Related
Apr 20, 2008
When installing Vista SP1 on a Sony notebook the process hangs at 56% during phase 3. I have left the machine for many hours with no indication of any progress being made (no HD Led flashes and absolutely no feedback re problem).
View 6 Replies
View Related
Jun 25, 2009
New Install, updated to SP2, once boot up, I select a folder to check properity, explorer crash, next rebooted, and got to desktop and selected, my hard drive, right click, and crash again... What going on.. Why is Explorer hanging ? I ran system file checker tool, sfc.exe Nothing wrong, all is well.
View 7 Replies
View Related
Nov 14, 2008
When I click on the Windows Update button the box opens and that's it. The cursor tells me that it is working but even after an hour nothing happens. The box is empty. I haven't been able to update in a long time.
View 6 Replies
View Related
Mar 31, 2008
I'm trying to get around a problem in Outlook (2007), whereby Outlook hangs for around ten minutes if you hit key or click the mouse whilst it is mid-stream of checking a POP3 mailbox. To this point, I've tried just about everything, recreating the Outlook profile, recreating the Windows profile, installed SP1, uninstalled SP1, installed other office hotfixes, uninstalled same hotfixes, installed Vista SP1, uninstalled Vista SP1, installed Vista hotfixes, uninstalled Vista hotfixes.
The next thing I want to do, short of a fresh clean install of Vista, is to do an inplace re-install of Vista. However, in the Home Premium stakes, all I have is an OEM disk, which is what the machine came with. Does anyone have any way this can be done? I want to try this as a last-resort fix, as it did work for me in resolving a problem with a different Outlook 2007 problem on a Vista Business machine, but I feel kind of stuck, and in a position where I now have to purchase a Home Premium Upgrade, just to get the disk. Seems a lot of expense to go to, just for a piece of plastic.
View 7 Replies
View Related
Mar 23, 2008
I'm having issues trying to upgrade from XP Pro to Vista Ultimate. Upgrade advisor says my system can handle Vista just fine. I pop-in the DVD and it says it might have some issues with the printer and some cellphones I used to connect to the PC but other than that all is well. I continue with installation, it copies files and whatnot and then it reboots (which it is supposed to do). However, the installation hangs on the Windows Vista loading bar. It just stays there forever. No error message, nothing.
I've tried it twice now and both times the exact same thing happened. The first time as an upgrade the second time as a clean install on my second hard drive. I googled my problem but found no real help. Do any of you have any clue how I can get it to install?
View 6 Replies
View Related
Jun 28, 2008
I have received SP1 this morning via Windows Update. It started to install and asked to reboot to finish install. I went to lunch and after several hours is still doing this:
Show a message in the screen
Installing Service Pack: fase1 of 3 0% completed
After more less a minute it says Shutting Down and reboots
When it restarts it shows the above message again. Time after time, it's been doing this for the last 5 hours!
View 8 Replies
View Related
Dec 12, 2007
For some reason, when i start using explorer the system starts to take a long time to load anything and gets stuck on the loading cursor.. pretty soon it requires me to hard-reboot the computer. This also occurs when i am trying to install software.
View 6 Replies
View Related
Feb 1, 2010
I have Windows Vista Home Basic SP2 on Dell Inspiron 1525. It used to work fine, but recently when we tried to reboot, it hangs at black screen. I tried to open "Advanced Boot Options" menu by pressing F8, but still it doesn't show any menu and hangs at black screen. I also tried to boot the computer by inserting the Windows Vista SP1 CD but still no luck. It also hangs at black screen. how to get into Safe mode or to "Last known good configuration" option, to atleast try something.
View 5 Replies
View Related
Aug 25, 2008
i have been having a few problems with my new vista computer its a hp txz 2500z with vista buisness and im the administrater acount if that will help first prob is when i try to log off or shut or restart down the computer it hangs in the shutingdown or loging off screen and i have to use the power button to turn it off
other prob is the taskmanager wont show up. i see its icon in the bottom right bar (green gridlike box) it jus wont show up on the screen last some programs wont open like itunes or the conect to a network and network setings and sometimes windows defender i think they might run in the background but i cant get taskmanager running
View 7 Replies
View Related
Mar 23, 2008
I just built a brand new computer, it consists of the following: Q6600 quad core, EVGA 780i mobo, 8 gigs Corsair XMS2-6400 800MHz mem at 5.5.5.18 (of which only 2 gig during install), 2 150gig Raptors in RAID 0, and a Maxtor 300gig for additional storage. I am going to be putting in a 9800GX2 GPU in aprox 2 weeks(waiting for availability at my fav shop). For now I have an ATI X800 GTO GPU in it. Now all of these items are compatible with Vista(as far as I have found). After 4 installs that would not complete, I finally get to Vista desktop, the automatic update does its thing, reboots, and reboots...etc. I found a hard start from off it boots?!? So I turn off and put in 1 more stick of RAM(now at 4 gigs). Same prob, reboot snags over and over, but a hard start is good. I have a TON of components to install and hard start is not going to cut it.
View 4 Replies
View Related
