DSL Static IP Can Not Connection
Jan 4, 2008
I have solved some of my woes. I will do my best to describe the rest of them to you. What I am trying to do is reconnect my Xbox 360 to my PC. I had this working for three months(since I have had the 360), then, I had to do a clean install of Vista. Well, almost a clean install, I quess it is a re-install, because if left a lot of the stuff I already had, just cleaned out my email and such. Now, I can connect my 360, and the pc recognizes it when I am in WMP 11 and look at the media sharing. Here's the problem. I can either connect to Xbox Live or I can remove the network setting in the 360 and I can browse the files on my pc through the 360, but I can't do both like I could before. It's one or the other. I am using a Netopia 2240 dsl modem/router. I have not changed any settings in the router whatsoever.
After I did a reinstall however, I could not access some SSL pages or recieve email( I could send ok, just not recieve). I fixed this by rolling back the driver for my Network card. The problem between the 360 and my pc existes only after the reinstall. Heres something else, win I try and ping my router it times out. And, I cant access it through 192.168.1.1. When I use the cmd prompt and look at ip's, they are all static. Shouldn't I have dynamic? One last thing, when I click on my Broadband connection and click on details, next to dhcp, it says NO. However, on my LAN connection it says Yes??? PS- can someone tell me how to take a screen shot so I can post/better explain what I am doing.
View 8 Replies
ADVERTISEMENT
Dec 16, 2009
Since there are no Windows 7 newsgroups I hope my post is appropriate here. If not, please let me know where I should post Win7 questions. I have a new Dell netbook running Windows 7 Starter Edition. I need to configure a hard wired network connection using a static IP address and I can not find where to do so. What I am looking for is the equivalent of Control Panel | Network Connections in XP.
View 6 Replies
View Related
Sep 19, 2009
I just wanted to ask.. is there a way to get static IP..So that i dont have to call my broadband provider. I have dynamic ip and it always changes... it really annoys me.
View 9 Replies
View Related
Jun 18, 2008
Can some explain in LAYMANS terms how to set up a static ip address in vista and are there any bad implications in doing so? The reason is I live in the UK and wish to join a UK based internet forum/club but they will only accept UK based ip addresses which apparently mine is not.
View 7 Replies
View Related
May 1, 2008
downloaded 2 "important" updates to my vista system. now, can't keep my ip address static (TCP/IP v4). keeps returning to dynamic. restarted and did lots of 'diagnostics'.
View 4 Replies
View Related
May 14, 2008
So basically, I have a Sony Vaio with Windows Vista 32 bits. We send it off to my fathers company to get an anti-virus installed. When they gave it back, I tried to get wired internet but nothing. So I checked the LAN configuration and the static ip and DNS of the company had been left there (when before it was configured to be used with DHCP as I use at home). So I tried to change it by putting Get IP address automatically, nothing complicated. I restarted the computer, but the static IP stayed, as if it was stuck. Tried the same 3 times and nothing. I am the Admin of my computer, but it seems that the OS or something won't let me change the IP address.
I went to talk the technicians in the company but they couldn't resolve it. I'm kind of getting mad about this subject, I just want to use the internet in my laptop. After trying everything (even reseting the IP through cmd.exe, which worked because the static IP was erased, yet when viewing properties, the static IP option is still selected but with no specific IP address in the boxes) I can only think of uninstalling and reinstalling the network controller. I am just afraid that the driver is not embeded within the disk (because when I bought the computer, no drivers were given to me). Before doing anything rash and messing the computer even further,
View 4 Replies
View Related
Jun 2, 2008
When i plug my headphones in i hear static, you can not notice it once the music is playing, but it gets really annoying really fast. I dont know what to do. I have my speakers hooked up to a Turtle Beach Montego DDL. I couldnt find any X64 bit drivers for this card, so i figured there had to be other drivers that had the same chipset......I was right. So i have different drivers for the card.
View 9 Replies
View Related
Jan 12, 2010
I'll preface this with the fact I am only so knowledgeable about this IP stuff. I am all my computer challenged family has to rely on so I want to be able to see what happening on about three other computers in three different locations. I am a serious cheapskate so I tried some Shareware called "Anyplace control" worked great through the online account but slow. There is apparently a direct connection option but I need a static ip to make that happen. So keeping it as simplistic as possible for me how do I get my mother Vista laptop, my two daughters Win 7 laptops able to be remote tweaked from either my Vista laptop or XP desktop. I am not locked into that software it was just easiest at the time.
View 5 Replies
View Related
Dec 25, 2008
I have a Static IP Address. And there is a website I want to access, but it can never connect. So I contacted the administrator, and he says I am IP banned from the site, and promptly blocks me. So I figure the best way to get around this was to change my IP Address. I've tried manually changing it, using tons of methods. I've even used the cmd method, but when I type ipconfig/release it gives me an error and says that "This action requires elevation" whatever the hell that means. I'm 13 and I am in no position to be calling ISP and asking them to change my IP address. So you guys are basically my last hope. How do I change my Static IP?
View 7 Replies
View Related
May 10, 2008
In the system tray in Windows XP there was a modem icon that lighted up when data was being transmitted or received. It really helped with a dialup connection - being able to see if the connection was active or not. In Vista, the modem icon is static and doesn't show anything other than the fact that there is an active connection. Does anyone know of a workaround to get an **activity** icon that works like the good old XP one?
View 4 Replies
View Related
Mar 23, 2008
I have been trying to connect a new Vista laptop to an old static IP4 network. The Vista firewall is blocking me. It is a public IP address (I'm not sure what that means), which apparently is the problem. My IP address starts with 207.191... Does that make sense to anyone? I need to know how to unblock this address or just take down the firewall all together. I'll only be connected to that network for a few hours a week, so temporarily removing the firewall wouldn't be too bad.
View 4 Replies
View Related
Feb 6, 2009
In my XP days I would assign each of my laptop's network adapters (wired and wireless) its own static IP address. I did this to make it easier to manage things like opening certain ports when using the laptop for gaming over the wired connection only.
Now that I have an all Vista home network consisting of a laptop and a desktop both with Vista Home Premium I am running into trouble assigning these static IPs on the laptop. The primary connection is the wireless and i use the wired connection to game or to transfer files across the network. When I go to set the IP on the wired connection I get the message: "Warning: Multiple default gateways are intended to provide redundancy to a single network such as and Intranet or the Internet. They will not function properly when the gateways are on two separate, disjoint networks (such as one on your intranet and one on the Internet). Do you want to save this configuration?".................
View 4 Replies
View Related
Aug 19, 2009
Now you see it now you don't. Here's the scenario. When I reboot everytime, the gateway static IP address disappears. I have to manually enter it again. Everytime! I'm using Vista 32 Business SP2 on a Thinkpad X60s notebook. Why does this happen and what's the solution?
View 9 Replies
View Related
Apr 13, 2008
I want to set a static ip and it works untill I reboot then local access but not internet. When I try to switch back I have to power down the motherboard to make it change back. Weird AAH! Its like the nic on the m2n32-sli deluxe never releases its memory untill I shut down the power supply manually.
View 5 Replies
View Related
May 20, 2009
my computer is not holding it's internet connection, even when i refresh it just wont reconnect and i end up having to restart and then the connection is fine. I'm running Vista Home Premium, Defender, ZoneAlarm (free) and Avast (free). Broadband connection. is there anyway to secure the connection permanently (which it should be) Have i, a setting wrong? At all times my internet icon says i am fully connected?
View 9 Replies
View Related
May 15, 2009
I am having the worst problems connecting using a cable connection, which I need because as I am in Europe at the moment, many sites or private homes are not equipped with wireless. Now, when I connect with cable, everything seems to be working fine, the Toshiba connectivity doctor tells me I am connected, the diagnose program assures me that the problem has been resolved etc. etc. and yet whenever I try to connect (IE, Mozilla, Google, I have tried them all), I get an error screen. I have tried everything I could think of, checking my settings etc. Nothing works.
Let me emphasize that:
1) wireless connection works fine
2) it is a problem with my computer, not the host, since I have encountered
the same problem everywhere (libraries with password protected access,
private homes without password protected access etc.).
View 9 Replies
View Related
May 2, 2010
I have a strange problem. I have AOL broadband and I'd like to connect to the internet without using the infamous bloated AOL software. I know how to do that using Vistas' "set up connection or network" wizard and I can successfully log in using by username and password. The problem is the connection is very poor when I use this method. The speed tests show the correct speed and downloads are full speed but pages seemingly randomly do not load (for long stretches of several minutes). For example my home page does not load ("page cannot load" error), google does not load, some pages load but not fully with many errors.
This isnt a browser issue (I tried firefox, IE, chrome), this isn't a modem/router issue (I have a laptop that works fine with a permanently logged in router), it's not an AOL issue I can still log in fine with AOL software and then browse fine with firefox, it's not a hardware issue, and it's not a firewall issue (it's off). Therefore it must be an issue with the way windows connects to my modem when using the built in PPPoE broadband connection. I really have no idea what could be wrong. Maybe one of you do?
View 5 Replies
View Related
Mar 24, 2008
With Vista, I can get internet for my new Dell XPS laptop over the wireless connection without doing anything other than selecting the connection. No user name or password is needed. But to plug in directly into my cable modem, it does not work. Seems to require user name and password. But I use Verizon and a Motorola SB5101 modem and while it is broadband, I did not think it is pppoe. I don't even know of any user name or password for my account. Am I wrong, is all broadband pppoe? My internet connection works just fine without asking for pppoe login info when I use my desktop with Windows XP. So, it seems to Vista specific problem.
View 6 Replies
View Related
Jan 24, 2008
I'm using Vista Ultimate x64, and a few days ago I started having troubles connecting to the internet. I have tried using both cabled and wireless connections, and both ends up with the same problem. I do get IP-adress, DNS and gateway from my D-link DI-624+ router, and when i try to ping a hostname on the internet ie. vistax64.com it resolves the hostname to a IP-adress. In "Network and Sharing Center" there is a red cross between my gateway and the internet-icon. I have no trouble connecting to other computers with other versions of Windows on my local network. The connection is also set to a "Private Connection".
View 4 Replies
View Related
Jul 8, 2009
my wired connection wasnt working so i looked in the network connection there was a network 5 and network 6 i dsiabled 6 and it was gone i thinking. i could re-enable it but no
C:UsersTricia>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Tricia-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Wireless LAN adapter Wireless Network Connection:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : socal.rr.com
Description . . . . . . . . . . . : Dell Wireless 1390 WLAN Mini-Card
Physical Address. . . . . . . . . : 00-1C-26-06-50-C0
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes............................................
View 4 Replies
View Related
May 3, 2009
I have been having ridiculous amount of trouble setting up my Linksys DMA2200 extender and I am a tech. I finally set it up and I also creating some instructions on how to set up the extender properly. Hope this helps you in getting your extender to work and save you the time it took me. All the updates listed are required and I do not have Service Pack 1 installed. I am using the advanced firewall ON in Windows and not using LiveCare and running AVG and no problems. View my site to see the list of items required for configuration to get the Windows Media Center to work properly with the extender. Also, the other link below has all the codec's that the DMA Extender to work. If your extender drops connections constantly set your NIC card to not go into Power Save mode. If it continues then reset the extender (Button in Back) Note: Need to hold it for 30 seconds. Then, turn on the extender and reset to Factory. Repeat setup process. If extender continues to lose connection after turning off again then contact Linksys or Seller for replacement.
View 0 Replies
View Related
May 22, 2009
It appears that I do have a very serious connection problem, which has popped up suddenly out of nowhere with no sensible explanation.
When I go to "Connect to a Network" I see that my connection has only one of five bars, with the connection status listed as "Low." When I go to "Control Panel>Network and Sharing," and "View Status" I see that the "IPv6 Connectivity" is listed as "Limited."
I removed the "Microsoft 6to4 adapter" previously because it had a yellow exclamation point listed next to it in my Device Manager after having read on the Internet that it could be deleted without any side effects if a person can't get it working, which was what I did. I now see that the "IPv6 Connectivity" is listed as "Limited" when I go to Control PanelNetwork and Sharing Center, and am wondering if this is due to my having removed the 6to4 adapter even though the system said it wasn't functioning properly. But I didn't have this slow connection problem until just the last couple of days, and I deleted the 6to4 adapter over a week ago.
View 9 Replies
View Related
Sep 3, 2009
I have a Dell Inspiron 1720 with Windows Vista
I'm trying to connect to some unsecure wireless networks at a friend's house for the first time and am only able to connect with local access.
I try diagnose and repair and it says that there are no issues. Three other computers are connecting to the internet just fine.
They signal is good, and there is supposedly data being sent and received but no programs will connect to the internet.
This issue has never happened before. I regularly run a registry cleaner and tried restoring to a backup from a couple days ago and that didn't help.
View 9 Replies
View Related
Dec 31, 2008
I recently built a second PC for myself, and decided to try out Vista on it. It installed flawlessly, but there's one problem. Vista does not seem to be recognizing my LAN connection. I tried hard-wiring it from my modem, to my router, to the Ethernet port on the back of my computer with no success. From there, I tried plugging it straight from my modem to the port on the back of the computer.
No success there either. I know that it's not a problem with the motherboard because I installed this program that came with the mobo called 'Expressgate'; and when I run that before my computer loads the OS, the internet works perfectly.
View 5 Replies
View Related
Feb 6, 2009
i have been having problems with a slow internet connection just lately.when i am trieing to diagnose the problem with my isp's tech on the phone another problem has surfaced they ask me to connect via ethernet cable to the modem,when i am connected my machine says i am connected i.e the little blue circle in task bar but when i try to open a web page it shows "internet explorer cannot..ect" i have reset the lan adapter and rebooted the modem my sons laptop connects via lan ok and i can connect wirlessly ok is there a setting i have to do .I find that i have to turn my wireless adapter off to get a connection via lan i have updated drivers ect iam using vista h/p ompaq presario the lan adapter is a realtech family fast ethernet adapter.
View 6 Replies
View Related
Mar 23, 2008
I'm trying to use a VPN connection and it works fine if I'm using my wired connection, however if I'm on my wireless network at home, the VPN connection does not work unless I disable the ethernet card.
View 8 Replies
View Related
Mar 14, 2009
I have a Cross-over cable (I'm sure becuase the wires either end are different) that's Cat5E (incase it matters). I'm trying to pass the internet through a wireless connection on a Vista machine though the LAN onto an XP machine. I changed the XP computers Workspace to WORKGROUP for the Vista one. Also ICS is enabled on the wireless connection, Do I also need to bridge the connections?
View 5 Replies
View Related
May 15, 2010
At my office we have 2 computers (both Vista version 6.0) networked together. I'll call them computer A and computer B. I can access, modify, and save Computer B files from computer A - I can save them directly to B or A. However, when I'm on computer B, it will only let me access files on computer A, which I then have to save to computer B if I want to save any changes I've made. I get a message saying they're read-only files and I don't have authorization to save to computer A.
View 6 Replies
View Related
Jan 2, 2009
Im on an HP530 with Vista Home 32bit. I wanted to see some videos on my TV (Sony Trinitron XBR) which is "kinda" old and does not sport a VGA in connection. I bought a VGA to RCA cable and got it today so I connected the male VGA to the computer and the RCA to the TV and the laptop is not recognizing anything. Am I missing something? The VGA-RCA cable ALSO has a SVideo female and also tried that one. I already clicked the windows key+x to add it manually thru the "mobility" settings.
View 5 Replies
View Related
May 7, 2008
I have had a problem keeping my connection to the Internet. when I connect everything is OK until I want to use my browser and then I lose the connection from my server to the web (dialup connection)I am still connected to my ISP but cannot access anything from the Internet zone,It is shown only that I have a local connection only. I can ping my ISP and Ping the ISP's website. so it seems that I have a DNS misconfiguration, question is what do I start looking for?
Netcomm internal modem IN5920 and have tried a swansmart internal modem and a webexcel external modem with the same results. I can start to download virus defs Etc but will drop the Internet connection as soon as I touch the browser and be just left with a local connection. I have had this problem for over a month and have greatly increased Telstra's Australian coffers
View 5 Replies
View Related
Oct 8, 2008
I like to have some advice on my internet connection problems.. when i open up my browser and going to surf a little my connection blocks after a few windows. if i close down my browser, and open up again, it works the same some windows and blocks.
View 8 Replies
View Related
