I have just re installed crysis today on my system and all was fine, I played it for a few hours on high settings and max res. I went to work and got home tried to load it and it begins to load then 20 seconds in causes my system to restart....
View 5 RepliesI have just upgraded to Vista 64x SP1 and am having difficulties with Crysis / Crysis Warhead. My specific problem is that it is not allowing me to select resolutions higher than 1280. When I was running it on XP Pro 32 bit it was running at 1920 by 1080, and allowed me to select up to this resolution and all lower options.
I am particularly confused because: Far Cry 2 runs in 1920 * 1080 without problems My desktop is set at 1920 * 1080 I have tried creating a autoexec.cfg file in the game directories forcing the width and height without success I have reinstalled the latest vista 64x CCC and drivers I have tried reinstalling both games completely without success thewre is no scroll bar on the right in the resolution options which I have forgot to use I upgraded to a 64x system specifically for Crysis / CW as I understood it would improve performance and I wanted to see the DX10 effect - needless to say I am very frustrated as a result!
I have a Sony laptop with Windows Vista as operating system. The system crashed. So I initialised a new start via CTRL, ALT and DEL. Unfortunately, the shut down process got stuck and the screen just displays "shut down" without doing anything. It remained like this for a couple of minutes when I hold the turn-on/off button pressed. I was expecting to force my laptop to restart again (which is the usual case on a Windows XP machine). However, my laptop just went to the stand-by modus. Pressing the turn-on/off gave back the frozen display of "shut down".
View 4 Replies View Relatedi have installed litestep, didn't like it, so i pressed uninstall. nothin happened.i decided to reboot, did so, and when i log in, it shows My Computer in explorer! i thought it was just meant to be the desktop starting, not explorer. and there wsa also no taskbar anywhere. i pressed the windows button, nothin happening. anyway i tried safe mode, in which i noticed there was an exe file starting with the core drivers. that must be what is left of litestep.
View 7 Replies View Relatedeverytime i restart the computer my system restore point that i made by my self is deleted and when i open system restore center i get a messege that no restore points were made and i made one my self further more i can see the file in systyem restore folder aproximatly 300mb but after restart he's not there what the problem could be?
View 8 Replies View RelatedWhy, on Earth, that even my desktop computer which I've just recently re-installed windows XP is it annoying me with the yellow shield saying I need updates?! I just did it now and it said "done, now we need to restart" I click restart, it boots up and it STILL says I need to update! Could it be because, this computer ALSO has Microsoft Office 2003? If Office 2003 the problem, or is my luck just crap bad nowadays?
View 4 Replies View RelatedWith my system specs (you can see below on system specs button)
i get on average 30-40 fps on a high w/ 1680x1050 resolution. on a 23 inch acer monitor. Does anyone think thats good? how much do you guys get and make sure to put if your cards are in crossfire/SLI
i have a single MSI HD 4870 1 GB with 4 GB RM XMS2 w/ Heat Spreader Corsair @ 800 mhz and an Intel Q9650 @ 3.0 ghz. running it all with a p45 chipset (p5q Pro Turbo)
Every time i play Crysis i crashes after i short while. I've tried to install all new drivers for motherboard, Vista, Graphic Card and sound card.
It almost always comes with the message "nvlddmkm driver" failed.
What does this mean?
How can I run Crysis without crashes?
I run
Intel Core 2 Quad 2.4 Ghz
4 GB RAM (3327 MB)
Windows Vista Ultimate 32 bit
Gainward 8800GTX 768 MB graphic card
ASUS P5K motherboard
I downloaded the Cyrsis demo, which worked on my XP machine in the past, yet Im getting some strange results with vista.
After i install it, i cant find it anywhere, its like its not installing even though it appears to install and i dont get any error messages.
There is nothing in my "all programs" or program files folder to indicate it even exists.
Ive reinstalled it mulitple times with the same results.
Is anyone else having problem starting crysis warhead singleplayer? When i start game it says i need an internet connection. BS, there is nothing wrong with my Pc or connecting online, everything works fine except warhead. Not sure why singleplayer needs internet? Is it a bug in the game or what.
View 9 Replies View RelatedI just installed Crysis and have it running on 64 bit. I can only play for a short while until it either freezes or does the thing where windows closes it out saying it stop responding.
View 6 Replies View RelatedJust downloading now Crysis by Electronic Arts. Be warned its 1.77GB, so my take upto 15mins to download
View 9 Replies View RelatedRecently ive been trying to encode video using Convertxtodvd but it always crashed after about 5 mins. I switched to TMPG dvd author and all was fine i could encode my video. Today i installed Crysis on my pc. My pc froze completely after about 10 mins of playing it. The sound was repeating itself and the computer didnt respond to anything.
I had to restart the comp, i then loaded it up again for it to crash after about 20 mins of playing. Im not really sure what to do. Not sure if its my hardware or software. Im using vista 32bit but i tried installing windows xp pro and the same freezes occured.
I was playing Crysis today and all of a sudden the game froze. I have a HP Presario xxx with Vista premium. Can anyone tell me how to fix it?" Example 2: "The Postmaster said my mail box is nearly full! I have a lot of messages in my sent Items folder, but Vista won’t let me delete them!? What do I do now?" This question is so vague that it leads to more questions than answers. This is an easy post to ignore! Example 3:.................
View 9 Replies View RelatedI have a GTS 250 and when playing Crysis on Very High 0xAA 1024x768 i get horrible framerates. (12-18FPS) I change everything to LOW settings and the frames still are the same.
View 9 Replies View RelatedI am using vista home premium 32 bit. specs. core 2 duo 2.2 ghz. ATI Mobility Radeon HD 4650 graphics card. 2 gb ram. it says that my card can play crysis at low graphics.
View 7 Replies View RelatedAs title says..works with DX10 64 bit out of the box. Nice one. No fiddling like the Demo. Using the 169.01 beta drivers.
View 8 Replies View Relatedi have crysis warhead installed on my rig in this folder C:Program FilesElectronic ArtsCrytekCrysis WARHEAD. i have downloaded the 1.01 patch (or something like that) and the 1.1 patch, i am 100% sure it is for warhead and not wars. when i launch either patch i get this. also, does anybody have any idea when te Sandbox editing thing is released.......ive wanted to play it soooooooooo much for about a year and was pretty disapointed when i realised warhead doesnt have it, but i have heard that it was going to be released soon.....i heard this about 6 months ago. i have tried: running as admin re dl'in running in compat xp 32 mode. my system specs are in that special box....but i dont think that really has much to do with it..
View 5 Replies View RelatedThis problem began to be noticed on vista, but the vista laptop was too slow to really get into crysis. Crashes such as this one occur on both. In additon, Crysis may also fail to menu, and be resumed with the resume game selection. This is a new win 7 system with a quad core AMD Phenom II at 3.2ghz, not overclocked, and a Diamond MM HD4890 video card also not overclocked. 4G OCX 1066 memory (dual channel) on an Asus M4A79 Deluxe MBD. Video driver is ATI's last release. I seem to remember that there might have been a reversion to an older copy of MSVCR80.dll in order to patch some ATI video drivers. The list at the bottom identifies the dash numbers I found on the system. The system was fully patched as of yesterday morning. Crysis has the Crysis update patches as well.
Problem Event Name: BEX
Application Name: Crysis.exe
Application Version: 1.1.1.6156
Application Timestamp: 47d6d167
Fault Module Name: MSVCR80.dll...............
I want to buy the alienware M15x, I want to configure it so it has a 1GB ATI Radeon™ Mobility HD 5730 and a Slot-Loading Dual Layer Blu-ray Reader (BR-ROM, DVD+-RW, CD-RW)which will make the Lappy $1399....Would it be able to play StarCraft II when it comes out? Diablo 3? Sims 3? World of WarCraft? All of these games at high settings? I love video games, but I don't play high demanding ons such as crysis or other games like it, pretty much the posted games above are what I play. Is it worth the price? and will it last me for many years graphics card wise? can the video card be replaced if i want to upgrade? if so how much
View 4 Replies View RelatedI've finally got Crysis Warhead. it came out the 16th. and was available yesterday. but my gamestop was closed cuz AC broke. BS I know. so, I've finally got Crysis Warhead. the cover looks pretty cool. and the game looks pretty amazing actually. I can't wait to see how well it runs on my system. I'm installing right now. and I'll post back shortly after I play for a while today
View 9 Replies View RelatedI am having what seems to be the common problem of trying to run the 64 bit version of crysis and getting a black screen then crash right after launching the game. I have done a lot of searching and did a few of the suggestions like uninstalling the Nvidia Network Access Manager, changed my settings to force vsync both on and off, and set single display performance mode. I have tried both exes in the 64bin file, launching from the vista game explorer and my drivers are up to date. Also like others the 32bit version works fine. I have also reinstalled the game.
View 6 Replies View RelatedHaven't tried VMware on my Vista 64, though I have tried microsoft's own offering using my Windows Vista 64 system as a host to a Windows XP 32 guest. I installed Crysis in to my virtualized Windows XP 32 system but when I insert the disc in to DVD drive Crysis tells me it needs an original disc not a back up, [ and that is the original disc ] so I can't figure out why it thinks it is a back-up.
View 4 Replies View RelatedI Just got a new computer and upon first turning it on my daughter accidentally hit the button on my power strip turning the computer off mid-installation. Now when I turn on my computer it looks as if windows is trying to start but goes to a message stating "Windows could not complete the installation. To install windows on this computer, restart the installation." I then click "OK" and it just brings me back to the same message after re-starting. Could anyone please help me get this thing back on track?
View 9 Replies View RelatedHave had pavillion dv9408nr home premium vista 32 notebook for 2 and a half years,no problems.Untill 3 days ago laptop would not restart after sleep. Lights on but screen black.Started to do the same when i try to boot up from cratch ,never done that before. Takes a few attempts to boot up. Updated the bios and a few drivers but still the same problem also tried a system restore never worked either.
View 6 Replies View RelatedMy PC will not restart. Windows will shut down, screen goes blank (but still powered) then nothing... Power is still on, No HDD activity, just sits there all day long! You have to manually press the reset button on the case. Ive re-formatted with no luck. Even exiting bios does the same! I had a few problems yesterday when something went haywire and i lost registry keys to the point where windows would not load up in norma mode. no problems in safe mode though. So today i formatted and then i noticed this restart problem.
View 6 Replies View RelatedSeems like it's since SP1. Happened twice now, have to restart to get it to work. Anyone else having this problem? Running Vista Home Premium.
View 6 Replies View Relatedi,ve been playing about on my satellite pro. got board at 3a.m yesterday. since then when i restart my laptop and logged in, when the start- up screen comes on there,s a cmd exe box that appears. inside the box the dialog goes off and on to quickly to be read, need help to get rid of this please, totally annoying and also how did it get there in the first place.
View 4 Replies View RelatedI had been putting off updating to Vista SP2 but bit the bullet 2 days ago.After downloading the machine shut off never to restart.When I restart now it wont boot.I have done all the recovery tests and programs.I have tried a manual restore(all restore point were somehow lost) via the command prompts nothing seems to work. The startup Repair log says registry is corupt.I can see my files and obviously want to retreve them before I do a complete system restore.As I see it I have 2 choices. Buy a external harddrive,run unbuntu and hopefully copy files to the drive. Option 2 but a internal harddrive,buy a new OS,load it, connect my bad drive and see if I can copy the files that way. Computer is 2 years old (Dell) no Vista disk,downloaded the Vista recovery disk(didnt help) Vista home premium 32 bit.
View 4 Replies View RelatedI have Windows Vista 64 bit and have been experiencing problems AGAIN. I have to actually pull the plug on the computer to restart it because a message keeps coming up saying I have another instance of Windows mail running in the back ground. I THOUGHT the problem was solved when we un-installed and re-installed Norton but it worked for about a week and now I have the same problem all over again. I can open the mail ONCE and the when I exit and try to go back in. it says " Another instance of Windows mail is running in the background. I can't even go to Start/ re start. I have to unplig everything. Has anyone else had this happen?
View 4 Replies View RelatedI have a problem with my girlfriends Inspiron...I was running Partition Magic today and wanted to resize one of the partitions ... After restart Vista won't run... I pick the Launch StartuP recovery, it shows System recovery Options window with nothing in it .... When I try to load the drivers it lets me to choose from 3 partions ... but there is no Partition C with the OS . When I run startup repair it says: The Partition table does not have a valid System Partition. repair action : Partition table repair ... girlfriend nearly killed me ... cause of "lost" music etc ...
View 4 Replies View Related