Connected HDTV To PC - NO SOUND AT ALL
Feb 18, 2009
Please could you help. I have a Hitachi 26" HDTV that I have connected to my PC via a HDMI - DVI cable + stereo jack. The picture is fantastic bit I have no sound at all. I have connected up using RGB cable, sound is fine. I have asked around and apart from people trying to sell me extra cables costing £40-£50 I have not had much luck. I think I have 2 motherboard (sorry not very tech minded) one is M3A motherboard and the other is K10N78hSLI-GLAN. I have checked all setting etc, volume on all is up. I have Realtek High Definition Audio.
View 9 Replies
ADVERTISEMENT
Feb 17, 2008
i have hooked up my pc 2 my panasonic hdtv and am now using it as my current monitor. however, there is no sound whatsoever. no matter what i do, i dont get any sound at all. I connected video through a hdmi to dvi cable and audio through a 3.5m jack
View 4 Replies
View Related
Feb 2, 2009
Im using new DELL studio 1535. Sometimes when I open laptop, it says sound device is not connected and there will not be any sound. But, If we have restarted PC, mostly the problem solved for that time. some times, when I use some audio files, sound crackles and stop working, windows media player error code C00D11B1 appears and sound has gone untill it is restarted. Sometimes, automatically sound goes and it should be restarted to solve the problem! I hav checked device manager, and it says all the sound devices are working properly..
View 4 Replies
View Related
Jul 23, 2008
I recently Got vista home premium 64 bit and my microphone is not working. It says microphone is connected and working. (not a headset), but it is not recieving any sound. My speakers do work. I have a x-48 ds4 motherboard, by the way. All drivers are updated, it just doesn't work.
View 9 Replies
View Related
Mar 3, 2009
I want to connect my pc to my hd tv so i can watch blue-ray, what lead would i need to do this? plus the lead will need to be abot 12ft long?
View 9 Replies
View Related
Mar 23, 2008
Instead of using a projector, I'd like to stream or display my laptops viewing to an LCD/HDTV or similar WIRELESSLY, can this be done?
View 9 Replies
View Related
Feb 7, 2009
I have been Googling for the past few days trying to find information about how to use a Vista Ultimate PC as a DVR. Specifically, I want to make it a dual-tuner over-the-air ATSC (DTV) DVR my ancient VCR. So far, the only TV tuner card I have found that mentions the ability to play back to a TV set is the Hauppauge WinTV-PVR-350 card, but it appears to be a single-tuner NTSC card. I need a dual-tuner ATSC so that I can record two DTV broadcasts over the air at the same time.
Either an internal card or USB device is fine. Is anyone out there doing this with a dual-tuner card or USB that can play back the recorded show to an HDTV? Apostrophes: when in doubt, leave them out! You will be correct more often
than not.
Its = Belonging to it. For example, "Look at the sky. Its color is blue."
It's = It is. For example, "It's hot today."
It's = It has. For example, "It's been nice talking to you."
Its' = completely incorrect usage. Stop it!
View 5 Replies
View Related
Aug 22, 2008
is it worth purchasing a HDTV to be used as a PC monitor?
View 4 Replies
View Related
Feb 25, 2009
A pal of mine with low sales resistance went out and against advice,bought a Wal-Mart special; an HP Pavilion "Slimline" with No S-video and HDMI outputs. According to the specifications for this HP S3713W, the video/graphics are all on the motherboard .
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01623239&lc=en&dlc=en&cc=us&lang=en&product=3870526
Furthermore, though there is in her "Slimline" one available slot provided to accept a "replacement" graphics card (for whichever model would have such a card) according to the manual, it will accept only "low profile" cards, and even at that they warn it still might not fit, so as to allow the inputs and outputs be exposed at the opening.
And since for her computer, this would not be a card replacement,those "cables" and plugs they refer to would be who-knows-where on the motherboard, or even hard-wired to it.
So now I'm wondering about something like this RGB to S-video
converter . . .
http://www.js-technology.com/product_info.php?products_id=34
My friend is largely blind, but she can see images and text on a large screen. My question is this: would such a converter enable video output from her computer to a large 42" LCD HDTV--and if so, would the mouse function be operative on that large screen same as on the 19" LCD monitor that came with her computer? Most importantly, would she get a full 42" display of her desktop and applications?
View 9 Replies
View Related
Sep 23, 2008
I would like to use my Vista Media Center as a DVR using a Media Extender. I have digital cable (Comcast). I would be using it just to watch recorded shows on my HDTV using a Media Extender and would not be watching TV on my PC. I want a HDTV tuner card that will record programs from my digital cable using Media Center Software, not proprietary software. Any HDTV tuner cards fit this bill? Can be PCI or USB cards (my PCIe is taken by my graphics card.).
View 6 Replies
View Related
Feb 15, 2009
Got something on my mind that has been bugging me for awhile I have my system hooked up via optical digital to my 7.1 surround sound amp for sound.For video output, DVI from GPU card via HDMI to HDTV. Couldn't I just hook up my HDMI to my amp then another HDMI to the HDTV?? This would eliminate the need for the optical wire, and maintain a lossless crystal clear sound, and still provide the 1080p picture.
View 4 Replies
View Related
Jul 29, 2009
I keep getting a yellow exclamation point on windows start navigation sound I can go in and select it and it works for the time it is selected. but as soon as I reboot the yellow exclamation point comes back how do I fix this can someone help me please it annoying and aggravating to have to turn that on all the time. I even did a system restore back to yesterday thinking I did something to it no go still dose it. nothing else broken all works good sound everything just not this one.
View 9 Replies
View Related
May 6, 2009
This worked for me before but I messed it up. I used to be able to record the sound coming from my computer and play it to my microphone right away as it goes. Meaning when I record something, it would record whatever is playing on the computer. But I forgot how to make that setting.
View 9 Replies
View Related
May 20, 2008
I just upgraded to Vista U x64 and am having sound problems. I have a prelude x-fi sound card but the sound coming out of it is extremely low. I have maxed out every thing I can max (control panel sound, creative panel) and the sound level is whisper quiet. I have also upgraded all my drivers except the prelude's, I would but their website isn't offering those drivers at the moment. But the drivers supplied with the card are vista certified so I should get something. But my mobo, etc is all updated. I have been searching for a solution for two days to no avail.
View 8 Replies
View Related
Mar 23, 2008
I have windows vista home basic, installed on my laptop and I am having a problem with the sound recorder. Everytime I open it up, a window pops up saying, "Windows Sound Recorder is not installed properly. Run REGSVR32 WavDest.Dll." How do i go about fixing this problem?
View 9 Replies
View Related
Mar 23, 2008
i am having troubles with windows updates and a microsoft tech told me to uninstall anything to do wit sigmatel. i take it that sigmatel has something to do with the sound because now i do not have any. i sent them back an email but they have not got back to me yet. what to do to get the sound back?
View 8 Replies
View Related
Oct 1, 2009
Since i built my computer I have been having fight with other family members over the internet as our router broke and we have to plug right into the modem (only one can connect at a time). Today i purchased a 8 port 10-100mbps network switch (Buying a router is not possible at this time) I connected the modem to the switch, then my computer and then the home computer. When i connected on my computer, everything was fine (I have vista ultimate x64 sp2.)
I then disconnected and connected the home computer (xp Pro sp3) Everything worked fine. Then I came back to mine and tried to connect and after a bit of waiting i got the message "Error 815" and that the server is not responding. When I do the opposite and connect my computer and then try connect the xp computer, I get the message "Error 676 the line is busy." I can browse both the computers files through network as long as I have the other computers password.Does anyone know a solution to my problem so that both computers can be online at the same time e.g. a shared internet connection from vista pc to xp pc or connect to the internet through the other computer and vice versa? P.S Both computers have kaspersky internet security but i tried disabling them and it still didnt work
View 5 Replies
View Related
Feb 6, 2009
This is not causing any problems, I just don't know why. I have an i7 on a Gigabyte GA-EX58-UD5, gigabit Linksys switch, Norton 2008 firewall, Vista 32bit, and 3 PCs (Vista, Vista, XP) in a LAN. Vista doesn't seem to think a LAN/switch is a real network? I can see all of the other network PCs, connect to the internet (DSL) thru a switch connected Linksys wireless router, share files, and printers; but it's bugging me.
View 7 Replies
View Related
Mar 23, 2008
I'm desperately trying to solve a network problem with Vista to a internet provider.
Nearly brand new PC with nVidia Forceware ethernet controller. After booting the PC, the network ICON in right bottom bar becomes blue. For 1 - 2 seconds the blue bell is visible, then disappears. It shows the PC is connected locally, but not to internet. According to IPCONFIG/all required IP addr, DNS, Default GW etc is set
correctly.
View 5 Replies
View Related
Dec 24, 2007
I went home for the Christmas break and I am trying to get my laptop to connect to the network back at my house. I set up a wireless network through the main computer and have found nothing but problems. The main computer is running XP and I am running Vista. Now, the problem is my computer will detect there is a wireless network available but it will not connect. It let me enter in a password to connect but it tells me there isn't enough strength to connect. This makes no sense due to the fact that it will display 90% network strength.
View 8 Replies
View Related
Jun 16, 2009
The machine has two NICs, both of which are connected to the Internet in the following fashion:
route 1: NIC 1 -- Internet (preferred Internet connection)
route 2: NIC 2 -- Switch -- Linux Cluster -- Internet (preferred LAN connection)
|-------(Printer, NAS, etc)
The linux cluster is consisted of some RedHat workstations, all of which are connected to the internet independently, but one of them (the frontend) also distribute IP and does NAT for the LAN. Also connected to the switch include some network resources, and this Vista machine..........
View 5 Replies
View Related
Apr 14, 2009
I'm re-posting this because it is only visible online at the MS website, not on NewsReaders so.... (I'll try again)...I just installed a D-Link DIR-625 router, before, we had a Linksys router with no issues whatsoever. (This is in secure WPA mode, there is no problem in "unsecure" mode) My sons PC has Vista installed. He has a D-Link wireless usb adaptor. Before, with the Linksys router, hookup was as would be expected, find the SSID, click, a prompt for passphrase, sweet. Now what happens is this... I right click the network icon in the taskbar and select "Connect to a network" a list of available networks shows.( as usual) I click our SSID and a different message appears than before, instead of getting the usual prompt for a simple passphrase, I get a "Windows needs more credentials to connect to this network", I click it and then a window appears prompting for...
Username
Password
Domain pass
this is not an option suitable for the usual WPA Personal encryption, first off there is no user name, no domain, its just WPA personal, TKIP,passphrase... what can I do? like I said it connects fine if no encryption is used. and it worked fine Lo these last 2 years with a Linksys WRT54G I'm not very familiar with Vista, I'm an XP man myself (I and my wife have XP, router installed on mine)(My wife has windows XP with a Linksys adaptor and it works fine so I know it is a Vista conflict)
View 6 Replies
View Related
Mar 23, 2008
I can't print nothing from my computer, the printer said the USB is no connected. I don't known what that means.
View 4 Replies
View Related
Jun 8, 2008
I have a printer connected via USB on my desktop computer running vista Ultimate 32bit and I have a Laptop running Home Premium 32bit it sees the printer cause its there on the printer's folder but when I try to test a print page from the laptop it says its being sent to the printer but nothing prints out. I know it works cause it worked when my desktop had XP PROFESSIONAL installed which was like 3 weeks ago. My desktop prints fine. I just need the laptop to print. By the way Im sharing the printer from the desktop
View 4 Replies
View Related
Sep 16, 2009
I've got a friends laptop to repair. I've determined that at least the boot files are damaged. I've connected the hard drive to my own PC in an attempt to recover the files from the drive. Unfortunately, my PC says that access is denied when I try to browse the drive. In the disk manager I can see the drive. I've gone onto the drive and updated the permissions on all the files to allow full access for administrators and users, yet I still cannot access the drive. I know that the content of the drive is still there because I COULD see the filenames zipping on the screen while the system was updating permissions. (That shouldn't work if I don't have permission, should it?) If I boot from an installation CD and try to access the drive from a recovery console it asks for the password for that Windows installation. I enter the only password that is on the laptop, but it does not work. There is only one user on the laptop, so that SHOULD be the password.
View 4 Replies
View Related
Mar 23, 2008
I have a Canon LBP 1120 printer connected to a Windows XP PC and a Vista Laptop. I used to be able to print from both computers..... suddenly the printer started rejecting orders to print from the Vista Lapton. It sends to the Canon printer menu but it disappears after a few seconds. I've reinstalled the driver but no joy. Find it strange that it used to print from the Laptop but suddenly stopped yet still prints from the Windows PC. don't wish to pay the ??99.00 Dell wants to charge to trouble shoot the problem!
View 4 Replies
View Related
Mar 10, 2009
Windows Vista Business with SP1 I have two NICs in my Vista Business SP1 machine - one NIC is connected to our corporate network, the other NIC is connected to a private network. Both networks are using DHCP, with the private network obtaining it's address from a LinkSys WRT54G (not being used as a router - just a switch with DHCP). The problem I having is that both networks end up with a entry in the routing table for 0.0.0.0 with the same metric. So anytime I try to access the internet (which should always go through the corporate network), I have a 50-50 chance of actually succeeding.
View 4 Replies
View Related
Nov 8, 2007
I recently bought an 8800 Ultra Extreme, I had a low PSU (580W) and was advised to upgrade, so yesterday I bought a 650W Zephyr PSU + Gigabyte 3d Galaxy2 liquid cooling system. I connected everything (including the 2 power 6 pin into the card) but in my motherboard I have a PCI_E (4 pin) power to be connected to that gives extra power to the card, I have a Gigabyte M59-SLI-S5 mobo. so it stayed up for about 4 hours yesterday, (testing games, and using the pc) without connecting that 4 pin power, I noticed lower FPS, but temps were more than fine.. Until now I realized the 4 pin power for the PCI_E onboard is not connected, so I connected it. now the FPS is back to normal, temps are still very normal, but i'm worried there might be something damaged with the card? I tested a few games and its fine, but i'm just worried. cus I have my 7950 GX2 artifacted, not sure why tho. Right now temps are 66C idle 74C on load.
View 4 Replies
View Related
May 18, 2008
I recently bought a new Dell with Vista Home Premuim and have not been able to connect to any of the six (6) wifi networks I've tried. Two home networks, one at work and three public. On each occasion I have been able to detect and where appropriate, provide security keys, but although it says it's connected it will not go on the internet or do any network activity. I do have a nice cheap Palm TX which connects to all of these networks, so I'm thinking it's a Vista issue. Given I bought a laptop for the explict purpose of using wifi, this is a rather expensive rock which is pretty much useless. Seems like lots of people have the same problems, but haven't yet found any solutions. What a surprise from Microsoft, eh?
View 4 Replies
View Related
Mar 23, 2008
I just got my HP Pavilion dv2068ca yesterday. I tried to connect through to internet. It was able to connects to my network, but not able to connect to the
internet. It also says my network is "Unidentified Network" It gave me options to diagnose and repair.
My laptop connect through 802.11 b/g WLAN
My wireless router is a D-LINK 802,11g 2.4GH
View 9 Replies
View Related
Feb 22, 2010
System InformationOS NameMicrosoft® Windows Vista™ Home Premium
Version6.0.6002 Service Pack 2 Build 6002
Other OS Description Not Available
OS ManufacturerMicrosoft Corporation
System NameDOM-PC
System ManufacturerDell Inc.............
View 9 Replies
View Related
