I have a Sony Vaio. I just bought it a week ago. Model PCG-3G5L. At random intervals I get a black screen, like a standby mode, and I have to press the power button or tap a bucnh of keys to turn it back on. I did a virus sweep and I have no viruses. Sleep mode is disabled. It was working FINE yesterday.
View 9 RepliesI have a computer which runs Windows Vista 32 bit and I have a problem with it. When my computer its turned on and I leave eat(because eating and so) it goes to standby or power saving mode. And when I come back and move the mouse or pressing enter it will not start again!!? and the mouse, the keyboard, my external sound card and my monitor is not powered. its simply dead. (the power button on my computer (the harddisk) is blue and it means that the pc is turned on but the monitor is just going to sleep. To shut down and restart the pc I need to hold down the power button. After that I restart the pc by pressing power button again and all the thing works again and windows says: continues windows and then I am where it went to standby or power saving mode ?
View 8 Replies View Relatedmy computer has been failing to enter and stay in standby mode. I had set the power button to initiate hibernate, sleep button to initiate sleep and close the lid to turn the computer off. All was working fine and settings are all as they should be, to my knowlege nothing has been changed but when I press the power button or try to enter hibernate through the start menu, the computer enters hibernate and then instantly starts back up. I am able to turn the competer off completely but no luck with hibernate. System restore is failing to work also so I am not able to set the system back to an earlier state.
View 7 Replies View RelatedI am currently researching into upgrading the telecommunications scene in our house satrting with replacing my current router which is driving me insane. The signal strenght is totally erratic & it often wont reconnect to the internet after going into standby mode.
Belkin : Wireless G+ Modem Router
I am totally noob when it comes to wireless, do all routers produce basically the same strength signal? Are some more long range than others?
Usually people want to get their computer to go to sleep or get their keyboard to wake up from sleep. Well my problem is that all devices other than my keyboard are set NOT to wake computer up from sleep but when I sleep my keyboard automatically wakes it up.
Can anyone help me figure out why my keyboard keeps waking up my computer automatically. Its a Dell SK-8135. I just want to be able to send my computer to sleep and wake it with the keyboard under normal situations.
I just recently turned off my laptop by pressing the off button and not the proper way on the start menu ( I know I'm an idiot) and now it won't turn on or off. It is now a black screen and when I press the on button it blinks purple and then red. I am currently using my friend's computer to post this. Does anyone have any advice as to what I should do in order for it to wake up?
View 4 Replies View RelatedI want to transfer all my files ect onto a standby computer, to have a fallback onto the information contained in them. I was under the impression that the necessary software for the transfer and Synchronization was in Vista Windows, but having connected the computers with a transfer cable (which was installed as new hardware on both computers) nothing further happened although I was supposed to get instructions on the Standby computer how to proceed with the transfers.
View 5 Replies View RelatedI had trend doing a new scan a more complete one while it was doing it i went in i could stop it hit cancel stop safe box and computer wouldreturn to normal I thought that was 6 hourds ago well after i deletedtrend it still in a safe mode.
View 9 Replies View RelatedI can say is I changed trend to do a real good cleaning of all of folders etc. When I got the safe mode I found trend was doinmg a scan so I stopped it and then it said close and stop safe mode which I did. I also deleted trend to. I m really bad I dont know what I did. I use that I had brain surgery and I m just dah sometimes.
View 5 Replies View RelatedComputer refuses to go into sleep mode. When I force sleep by clicking the power button on the task bar the computer goes to sleep for about 5 - 20 seconds and then wakes up and stays awake. The cause; Installation of a gateway router from AT&T to provide TV and internet service. AT&T tech support claims no known issues with this router, yet the computer slept just fine prior to installation of this router, and if I power down the router the computer sleeps with no problem. This is not a solution since the router must remain powered up to provide TV service to my home. I have searched the internet for a solution, and have performed all the steps in the tutorial authored by Brink to no avail.
View 9 Replies View RelatedWhenever I go into safe mode or run the memory diagnostic, after a few minutes it just turns off by itself. When I go to normal mode it works fine (as in I can have it on for as long as I want and it doesn't turn off). I don't know why it keeps turning off in safe mode.
View 7 Replies View RelatedI was late in activating my copy of Vista Ultimate, it went into RFM and now that it's activated, it still won't come out of RFM, I even installed SP1 in hopes that would bring it back. What else do I need to do to get my desktop and functionally back, this program cost me to much money for it to be so screwed up like it is. how to get my computer out of RFM? Another problem while I'm writing this is, my computer's Task Manager is grayed out, how can I activate it so it can be used?
View 8 Replies View RelatedI've found a few issues regarding sleep mode, but none that seemed to directly address my problem, so here goes: In the last two weeks or so, I've noticed that when I close my laptop's lid, the computer doesn't go into sleep mode, but instead hangs with a blank screen, and is completely unresponsive when I try to wake it up. The only way to fix it is to hold the power button to get it to shut off. However, this only seems to happen when my wireless network card (internal) is switched OFF. Even then, it doesn't happen all the time (i.e. sometimes it successfully goes to sleep, and wakes up again when I open the lid). It hasn't been a problem at all when the network card is on.
This started happening in late April, when two things happened (and they both happened at about the same time). First was that Windows Update automatically downloaded and installed a hotfix (946776) related to the computer crashing when the network status is changing. For what it's worth, I had never experienced the problem that the hotfix was supposed to correct. The other thing that happened was that I uninstalled McAfee and installed ZoneAlarm antivirus and firewall. I haven't been able to reproduce the problem 100% of the time, so I haven't figured out what sequence of programs running causes the problem (though it seems that iTunes and/or Windows Media Player is usually running when it happens). The first thing I tried was to use system restore and went back to before I installed zonealarm and the update. When I reinstalled ZA, Windows Update decided it was going to hurry up and download the hotfix before I had a chance to tell it not to. I uninstalled the hotfix (though it still shows up on the update history page, but not the list of installed updates), and the problem still occurred.......
so often I'll leave my computer on for several hours and come back to it and notice that the screen has turned off but it hasnt gone into sleep mode. this doesnt always happen there are time when my computer will sleep when its suppose to but I just cant figure out why it doesnt always do it. I have my screen saver to come on after 10 minutes the screen to shut off after 30 and its set to go into sleep mode in an hour but like last night when I went to sleep with my computer on and woke up hours later only the screen was off. does anyone know the cause of this?
View 4 Replies View RelatedI left my comp on overnight and now it has either gone to a deep sleep or hibernation and it wont come on now. I have an Acer Aspire L320 running on windows vista. Wheb i tried to wake it up nothing happened and now comp wont work. I have tried restarting, unplugging then starting, i thought i had tried everything but i am missing something. When i do try to switch the comp on again the fans make a noise then nothing, does this mean that something really bad has happened?
View 9 Replies View Relatedwhenever I put the computer to sleep mode and move the mouse while it's getting into sleep mode, it'll either restart or kill the computer. When it kills the computer, the fans still run but the lights on the front go out. There is also no picture on the monitor. To turn off the computer, I have to force a shutdown by holding the power button for around 4 seconds. Then, when I try to turn on the computer again, the fans turn on, the hard drive runs, but still no lights on the front of the case nor picutre on the screen. I fixed it by clearing the RTC RAM on the motherboard. After doing that, the computer would boot up, but if I did sleep mode and moved the mouse, then the computer would die again, and I'd have to clear the RTC RAM again. I'm wondering why this happens with sleep mode. I use Vista Home Premium 64-bit. Is there a solution to this problem or does anyone else have this problem?
View 9 Replies View RelatedWindows vista ultimate 32 bit crashed, bluescreens now and won't start up except in safe mode. safe mode with networking wont work either, so now im on my laptop. i tried restoring and it didn't work. am i screwed?
View 6 Replies View RelatedMy laptop wont go into standby/sleep all of a sudden. I click the button, screen goes black, sound turns off but all the lights stay on and dont go into that "blinking" status as it used to. Even the HP logo on the outside is still it up when it used to turn off when going into Sleep/Standby. Does anyone have any ideas what could be causing this? I have no active programs running, just on the desktop, with no HDD access occurring.
View 4 Replies View RelatedInstalled SP!. Had to go to work. Let it do it;s thing. Cam home, computer in standby, pushed button, upcame display. Right clicked on computer icon for properties. Damned rotating circle! After a while proprties did come up but nothing else would work. Had to power off via power button and power up again. I still think this is a piece of c-rap.
View 9 Replies View RelatedMy wife's desktop machine is a HP a1730n running Vista Home Premium. After
putting it in standby, after a short while, it comes back up to operation.
Most of the time it does this but sometimes, it will go all night staying in
standby. I asked this group about this and got the advice to go to advanced
settings in Power Options and change the multimedia setting "when showing
multimedia" to "allow the computer to sleep". This seemed to fix it for a
short while and then it reverted back to not staying in standby. I am
looking for some more advanced wisdom on this problem and hope for a
solution!
Vista x64 SP2 with 500GB Seagate SATA HDD. I can resume from standby, but it can take up to 10 minutes for it to work again. I believe it's the HDD not waking up (powering up) immediately when it resumes (S3 Hybrid Sleep).
View 6 Replies View RelatedIs there any way I can get my computer to go into standby or hibernate modes using Windows Vista. I've been to your web sites for help but I'm still not able to get standby or hibernate modes, in Windows XP there was never any kind of problem. My motherboard can use S1 or S3 setting but I've tired both setting and its just the same. The computer will start to go into hibernate mode for only five or six seconds then is will just restart.
View 4 Replies View RelatedUsing my ISP (Roadrunner Carolinas) speed test site; I get around 200 to 400 kbps download speeds using IE in normal mode. If I boot to Safe Mode, I get around 3500 to 4500 kbps, which is what it should be (this is what I used to get in normal mode before I re-installed Vista). Running the same speed test with Firefox, I get around 1500 to 2000 kbps in normal mode, but if I try to download a file it ransfers at only the 200 to 400 kbsp rate (if I'm lucky). Here's more detail about the system and what I've done so far:
Installed all updates including SP2.
Using Windows Firewall, no anti-virus.
Updated network drivers directly from NVidia (Chipset is nForce750i)
Updated graphics card drivers directly from NVidia
Disabled all LAN protocols except for Client for Microsoft Networks and IPv4
Connected via ethernet cable directly to cable modem, no router.
I've deliberately refrained from loading anything but the basics until I can get this sorted out..........
How do you switch between game mode and entertainment mode with creative soundblaster x-fi?
View 5 Replies View RelatedBefore the computer actually came to the point of "shuting down just before it tried to load the o/s" it literrly kept shuting down on its own randomly for a week or so. Then the blue screen appeard with this error: 0x0000007BC , 0x84C5DBA0, 0x0000034, 0x00000000, 0x00000000 "Run CHKDSK /F and check for Hard Drive Corruption and then restart your computer"
Basically it's telling me the DRIVE is corruptet! Well, I plugged that SATA 2 HDD into my other computer (windows xp), detected it correctly and actually formated the drive and reinstalled XP on it without any types of problem. Does it still mean - SATA 2 is corrupted or broken!? How about the RAM then ... indeed, I did run the MemTest for 7 times and no errors were found. So the RAM are ok in this case, or am I wrong?! Maybe it's the PSU... ermmm no that cannot be 'cos the computer never shuts down, if I leave it run for (e.g 5 hours) and even if it's comes to "overheating" that cannot be the case eather, as its *again" never shuts down when you leave it run on the power.........
When I reboot my computer through Windows the computer shuts down correctly, but then the monitor remains black and the bios starts beeping out the error code for "VGA not detected". Why would this be? I am forced to press the power button and wait from 5 to 10 minutes to reboot normally. (I'm using Windows Vista Ultimate x64, have an ASUS P6T Deluxe motherboard and a Gigabyte Geforce GTX 280. 800 watts ZION power supply) Is this a BIOS settings or GPU problem? I already reseated the GPU. Could it be a power supply failure?
View 9 Replies View RelatedHow do I transfer my quickbooks 2007 data on my xp computer to my new vista x64 computer with quickbooks 2007? Can this be done? If so how do I do it?
View 5 Replies View RelatedI would like to export my contacts from my computer to my second computer. Both computers use Windows Mail. I tried exporting the contacts as CSV and vCard files. Using both methods, I was able to import my contacts into my second computer but they weren't neatly organized in files: i.e. business contacts, personal contacts, family, etc. Is there a way to export my contacts so they are still in the correct files and are neatly organized?
View 9 Replies View RelatedI have a Vista Laptop that needs to access a printer on an XP computer in my sister's law office. I'm having trouble trying to even have the XP computer show up consistently on my sister's computer. I can ping it every time from the command prompt. I have all firewalls unenabled on both computers. Identical user accounts on both systems. File and Print sharing set up on both. The Link Layer topology is present on the Vista computer. When the laptop sits for a while the XP computer will show up on the map; but, Vista comes up with an error message when I try to access the XP computer.
Beyond that, the map will lose the XP computer on occassion. The Vista computer can access the internet well enough through the router. At this point I can't install the printer on the Vista computer for not being able to access the XP computer from Vista. I've networked Vista computers before on XP networks, and this is the first time I've encountered this problem. Additional info; net view will not show xp computer. Workgroup name is the same for both XP and Vista computer. The restrict anonymous registry key on the XP computer is set at 1. Was originally set at 0. (Norton's Systemwork altered setting)
I have a problem: I have a Windows 7 computer that is part of a Domain. By using System Restore, Windows has managed to ruin the trust relationship with the domain. I use a domain logon and am the only administrator on the machine (the Local Administrator is disabled). I cannot log in normally, due to the trust relationship issue. If I disconnect the network cable while logging in, I can (cached credentials), however I cannot change any UAC-protected settings because if I enter my credentials into it, connected to the network or not, UAC will simply show an error "This operation requires elevation". Nothing I try will work.
I cannot disjoin the domain, because those controls are protected by UAC. Logging in from a remote machine using my credentials will give me "Access is denied". Resetting the computer account in AD has no effect. I cannot format and reinstall because this laptop does not boot from CD by default and requires me to install a program to change BIOS settings (don't ask, it's a Toshiba, the usual way is broken). I cannot install this program because I am faced with yet another UAC prompt. I cannot remove the harddrive because of the laptop's design. how to salvage this computer?
I have been searching far and wide for a solution to my networking problem. I have 2 computers that i connect directly to each other by ethernet cable. Both computers also connect to the internet via wifi. So, on each computer, I have my Wireless connection, and the 'unidentified network' link between the two computers. The problem is that the 'unidentified network' settings never save, so when ever i restart either of the computers, I have to make the unidentified network private again, and there is no way that i can see to actually save the unidentified network settings in a profile. Also, to prevent the computer to computer connection from broadcasting over the wifi connection, i have to disconnect the wireless from one of the computers. I have tried making the wifi a public network and the ethernet connection private, but it never seems to work. anyone out there know what i can do?
View 4 Replies View Related