I have several programs that the UAC need my approval for. I have setup tasks for each with all the correct settings (Run with Highest Privileges Checked, etc.). After creating a shortcut to the link, I attempt to click it. For a few brief seconds, a CMD prompt screen comes up and says something about the file wasn't found. I checked your article to see if I could find a mistake. There wasn't one. I even created a new task using your tutorial, and still it doesn't work. I am wonder if this is a fix with SP1 (I have SP1 by the way)? Is there another alternative?
I downloaded some pictures from digital camera this morning and saved them on my desktop as I always do. Viewed the pictures & all was ok. Just gone to view the pics again and says the following: The drive or network connection that the shortcut (then the image number) - Shortcut.Ink refers to is unavailable. Make sure that the disc is properly inserted or the network resource is available and then try again. I have no idea what this means but deleted the pictures of the camera as I viewed them and they were fine.
I do not want to see any of the programs at the top of the list of All Programs (especially Internet Explorer). I just want to see the program folders listed, preferably sorted by newest or most recently modified first, by alphabetically would be OK. How to get rid of the 8 programs shown in here? Thanks.
Ive been having a few problems with uninstalling some programs via the add/remove programs tool. For example I have been trying to uninstall Itunes and everytime I do Windows installer says it is preparing to remove and then it stops and a window come up that says "The system administrator has set policies to prevent this installation." and then another one says I do not have sufficient access to uninstall Itunes and to please contact system administrator.
So I spoke to a friend how recommended this forum subject and I followed the Take Ownership steps a few times but to no avail it still does the same thing. I can't update Itunes untill this one is uninstalled!!!!!
I use Vista 32 Ultimate and I have this problem during the startup of Windows: The UAC control stops 2 programs and I'm not able to let these programs load with UAC control active. Tried everything also in Windows defender but no success. I must always confirm and let run these programs clicking on the UAC block tray icon that appear during the load of these 2 programs. Someone tell me that these programs blocked by UAC must be updated from the developers to pass the UAC.
when i go to start, all programs, all my folders/programs show up, but then i noticed that theres a "programs" folder within the list, and when i click that, it shows all the same folders/programs that are in the "all programs" list. but then some of the folders within the ones in the 'all programs" list, they are empty, but they show up in the programs folder in the list. i dont know how this happened and i just wanted to know how to fix this issue.
This morning, I started my computer, logged on and went on the Start Menu to access Microsoft Office programs. But when I went on the 'All Programs' menu, there were no programs listed! I really mean NO PROGRAMS AT ALL. This includes Microsoft Office folder and every other software and program i have got!.
I just got my new computer with Vista Home Premium x64, from Windows Professional XP. Installed programs are not showing up at Start/All Programs. Some are in directory C: Programs or Program Files (x86) and still dont't show up.
On my x64 box, TFS power tools was conflicting with Office Communicator. So I blocked Office Communictor from the startup sequence. As I expected, at startup I would get a message "Blocked startup programs" with the option to "run blocked program" if I want to launch Office Communicator explicitly. Good.
Then I uninstalled TFS power tools, and decided to unblock Office Communicator, so it can run at startup again. Unfortunately, the Office Communicator app shows as "Permitted," but is still being blocked at startup.
In other words, I can't unblock Office Communicator. Vista says it is "permitted", but it is not permitted at startup. I tried disabling and re-enabling it, to see if it would clear up, but no good.
How do I force it to be unblocked so that it will run at startup?
I detest those shortcut arrows that get put on all the desktop icons. I used Tweak UI in XP to get rid of them but can't find anything that works in Vista. I tried Frameworkx that did absolutely nothing.
I am trying to create a shortcut to c:Program FilesMozilla KompozerKompoZer 0.7.10kompozer.exe The window within which you create shortcuts says that this file does not exist! I am looking at that file! I have opened "command prompt" and cd to that subdirectory. question: Am I trying to fight UAC? I am *certain* that my spelling is correct.
ive started to get an error message after i download a program and install it everytime i reboot it says problem with shortcut then the item and whatever the filename is that this shortcut refers to has been changed or moved so this shortcut will no longer work properly do you want to delete this shortcut y or n.ive run malware software and avg but no threats found anyone got any ideas because im missing having pokerstars etc.
Every time I create a shortcut, usually by right-clicking on an executable and then choosing Create Shortcut from the context menu, the default path is always set to, for example, C:Program Files (x86)My Applicationmyapplication.exe. However, I already set my default Program Files and Program Files (x86) location to be in the D: drive. Nature of the Problem After installing Vista Ultimate x64, I installed TuneUp Utilities 2009 and from there, I set the default Program Files location to my second partition which is D:. I expected TuneUp Utilities to make the necessary changes to the registry. To make sure that no programs were left out in C:Program Files and C:Program Files (x86), I manually re-created the 2 folders in D: and then copied all the files and folders inside. I rebooted afterwards. Upon boot, my expectations toward TuneUp Utilities 2009 seemed to be correct because the default now points to D: (whenever I install 64-bit or 32-bit programs). I had no problems running the applications as well.
But a problem arises whenever a shortcut is made. It doesn't matter whether it was created by the installer itself or created manually. The target path always points to C: while the Start In path points to the correct one, which is D:. Whether it be in the Start Menu, on the Desktop, or in the Quick Launch menu, the same behavior happens. It's often a pain to edit the shortcuts manually- doing a right-click > Properties > change C to D > Change Icon > Apply > OK every time I install a new application or decide to create a shortcut for a certain portable app. I believe there's a registry entry that I can change so that the default Shortcut path now defaults to D: instead of C:.
Since installing IE8 RTM in Vista SP1 x86 I've been having some problems with internet shortcut icons not displaying correctly on my desktop. I've tried deleting and redoing them, tried using AM Deadlink to refresh my Favourites icons to no avail. They show normally in Favourites but show as a smaller version within a white frame on the desktop. This doesn't seem to effect all of them, just some.
I've attached two thumbnails to illustrate what I mean. The first one is the Canada Post item in Favourites and the second one is the same shortcut on the desktop. As you can see there there's another one doing the same thing for Newegg.ca. I think I am right in saying that it's not a case of rebuilding the system icon cache as that only effects system icons, am I right? FYI desktop resolution is 1680 x 1050 and I have the desktop icon size set to Classic.
I am having a problem deleting shortcut files as when i attempt to delete them it says that it could not find this item, they are also unable to be dragged into the recycle bin, nor are they able to be moved anywhere else. when i right click on them it says on the security tab after properties that it is unavailable or cant be displayed. This isnt happening with all the shortcuts but it is wasting space
How do I delete a desktop icon. Windows says that it can not find the file and will not delete it. I removed the program the way I should but it left the shortcut on the desktop and will not let me delete or move it. I've tried to change the properties , added sharing, and everything I can think of to remove the shortcut with no luck.
How do i remove the white space on the start menu?. Everytime i add a shortcut to the start menu it just keeps getting bigger and bigger and it wont file up the empty space.I've tried everythiing in the customize settings and it still wont fix it.
Because of an ongoing problem (SQL error prevents my posting to Thunderbird Forums) with one of my regular Vista accts, I ahve to use another acct to post to TB. I have to switch back and forth between the two accts whenever I access TB forums. So, is there any shortcut that I can use instead of having to go to Start>switch accts, logoff, etc menu?
if you add a shortcut (to a networked computer, so you can copy files),if its off, it'll hang computer. I thought the prob was because I've got an internal card reader. So, I put an entry in the registry to hide them. BUT this didnt fix the hanging (thats how I found out having the computer off (the one I added under sendto as a shortcut, causes it). So, how would you fix this, without removuing the shortcut to the networked computer?
I'm new to this forum so please bear with me.. I recently went to Vista x64 and bought a new computer... Everything was fine till about 3 weeks ago... While I work on the computer, nothing out of the ordinary happens... (No problems)... when I walk away for awhile and come back, I click on a shortcut and the computer Freezes... I have to shut down the system to get out of it... Simply put; Vista Randomly Freezes... I've checked the logs to no Avail... I'm getting real irritated by this and I was hoping that someone might have a clue to what is happening.
I right click on the desktop, open the menu and pick new then folder and it works fine. I right click on the desktop, open the menu and pick new then shortcut and nothing happens. I restarted the computer but it is still the same.
I was trying to save a file in Adobe Reader, but typed the filename too fast before the "save as" dialogue box was fully loaded. As you can see below, my stupid document folder got renamed instead to "A". I've been searching and searching, but can't find a way to rename it back to my original username. Clicking on it still gets me to c:usersayzone which is good.
What's the point of the Documents & Settings shortcut in C:? I cannot open it. All I get is a msg saying it's unaccessable. Is there anything there, or is it just there to look familiar?
I want to clean up my desktop by deleting some shortcut icons. Each of the icons contains the directional arrow in the lower left corner. However, when I "right click, delete" on any Shortcut Icon, I am prompted: Are you sure you want to move this file to the Recycle Bin? I actually deleted several programs before realizing what I was doing. :mad: The wording I was accustomed to in WinXP: Are you sure you want to remove this shortcut ...* isn't offered to me. I'm running Vista Home Premium 64-bit SP1
new to Vista and ignorant to most things about it. I just bought a new hp laptop and had Camedia master 1.2 installed on my old desktop,it uploaded my photos from my Olympus camera and let me manage them. When I put the software disc in the laptop and installed the program,it looked like Vista was going to accept it, it installed in programsprogram files and when I clicked on the shortcut it opened. Then I got the red x box,saying invalid pathway.
Since I believe it installed right why the problem? is there any way I can correct this,without spending up to a 150 for new software? I opened the program right from program files and still got the same invalid pathway answer and it had to close the program. I have Vista home premium.
