I have been getting the BSOD for like a year now, but only frequently has it really been bothering me, it has happened 4 times today...
The error is consistant. Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.2
Locale ID: 1033
Additional information about the problem:.........
Is there a way to delete "failed install of updates" I have the most updated version of the driver. it installed a few times B4; now it won't, error code states already installed or not compatible
View 5 Replies View RelatedEverything is working fine (so far) except that it does not recognize integrated Ethernet adapter at all. On advise of support guys did driver reinstall several time including while in Safe Mode. Even restored factory settings i.e. reinstalled OS. If I run "pnputil -e" then the adapter package is listed but the adapter just does not show up in Device Manager.
Already verified that it is enabled in BIOS. Netgear USB adapter worked just fine after installing vista driver for it. Thinking of putting in a PCI card but that will occupy one slot. Only 3 PCI slots are available - standard, Express 1 and Express 16.
I started out with Vista Ultimate on my new PC i get every now and than the famous BSOD. My PC is running 24x7 so most of the times it happens when I'm not sitting behind the pc. in the beginning (2 months ago) it happend about once a day, after a few later updates is only happend about once every 4 or 5 days.The only thing noticable I see is that after the PC rebooted from the BSOD the wireless network is not working (Siemens Gigaset USB Adapter 108) that is easily resolved by unplugging the USB connecter and plug it in again.
Yesterday I installed the Windows Updates that where published on April 8th, with the result that the BSOD now occured every 2 hours (not exactly but more or less) and after the third time I decided the uninstall all the security updates from that batch that i could uninstall. There were a few other updates but Office related that I left installed and on security update that I was unable to uninstall (the prereq update for SP1: KB938371). After rebooting the pc it has so far worked perfectly again for approx 20 hours.I have no clue of what migth be causing the problem,
One usb ethernet adapter for internet connection through an old router, one for a Linksys Wireless G router hard wired to remote security cameras sums up the problem where one cancels the other out. This is a problem for XP, Vista, and even 7 beta while the primary system still runs XP. The dsl connection is through an old dsl setup using a usb adapter while the Linksys pci adapter card or usb adapter once installed becomes the default network adapter.
The wireless router itself is plugged with the RJ-45 ethernet adapter directly into the main controller/dvr box for live wireless feed to the main XP system or this one as a second means along with direct plug in to a tv set in the room where the main box is located. In XP, Vista, and even the later 7 beta the same problem of running two adapters without conflict is the main question needing a working solution. This thread is intended to tax the most network familar people here.
The landlord runs the main XP system with eventual plans to upgrade to Vista while this system serves as a testing machine a good deal of the time explaining multiple OSs as a rule. The router and adapters are in working order not seeing any defects while canceling the original dsl adapter out when installed. That takes out the online connection in the process.
Business with SP1
Sony laptop, fast core2duo, 4GB
Defender+Avast!
Working beautifully for many months, and then a few
weeks ago this began happening:
Perhaps 2-3 times a week, and with no consistency of circumstances, a blue screen will appear. It might happen while working or when returning from hibernate. There's a countdown as memory is stored, and then a freeze. The only way to recover is to do a hard OFF (5 seconds on the power switch) and restart. When it first happened, I had not installed or changed anything, so I was comfortable doing a restore. It happened again.
It's confusing because the stated cause is inconsistent. I've checked to ensure that all drivers are updated and nothing that's contraVistarian is installed. What analytical steps can I undertake to discover what's causing this, and then to help me make the necessary changes?
window vista home premium 32 bitand not long ago i had connected a wireless router to it.
shortly after my network sharing did not work any more there was a ! on the on the network adapter symbol. code error 31
i uninstalled it and wanted to reinstalle it but i did not copy down which one it was,
i did researse on my computer and foud four intel (R)/pro wireless 2200BG nectwok connection and others .
my question is which was the one a deleted or which is the one i need to reinstall to be compatible with my pc.
I am still trying to get some help for this. In Device Manager, under Network Adapters I get a list of 20 approx items all with yellow triangle warnings (apart from 2). The first ones are Microsoft 6to4 Adapters. Info says drivers are up to date,but I get an error code 31. Details: Message "This device is not working properly because windows cannot load the drivers required for this device" (Code 31). Have checked for solutions, but says there are none. I get similar warnings for the other 20 items shown. What do I do now please? (I am using an Acer laptop, with Vista Ultimate OS)
View 5 Replies View RelatedIt seems many people have problems with Internet connections in Vista. I am one of them and have gone through all the discussions looking for a solution - nothing so far!! What seems to work is a script that automatically resets the adapter on
start up
Everytime I reboot the laptop I loose the ability to connect to the internet although the laptop confirms a connection to the wireless network router.I click "Diagnose this connection" and choose "Automatically get new IP Settings for the network adapter" I have internet connectivity restored.
The laptop is an HP dv6755ca, less then one week old, and has been checked to be sure all drivers and updates have been installed. I have run anti-virus and checked for malware/spyware. The network setup is 1. PC connected via ethernet, 1. wireless laptop and 1. smc8014w-g wireless gateway.
Although the setup was walked through with me by the technician (over the phone) I'm not yet ruling out a faulty set-up in the 192.168.0.1 site [except that I have had no issues with the wired connection].
I have several notebooks with Windows Vista Business 32 installed. After wakeup from sleeping mode, is necessary to reset network adapter to get to the internet. Otherwise only local network is reachable. I disabled power off of network adapter during sleep mode, Disabled IP6. I tried to install KB933872 but installation end because KB is not for my operating system.
View 7 Replies View RelatedMy computer will load up normally the way until it reaches the screen with the green bar and black screen. The green bar will cycle through about two to three times, but then it stops moving. It moves forward just a little bit every 5 minutes though, so if I leave it like that for about 40 minutes then Vista will be able to boot to my desktop. And when I try to restart my computer, it just stays at the 'Shutting Down" screen forever. The longest I've let the shutting down screen just stay there was 20 minutes. I had to cut the power. Anything that has to do with networking seems to make my computer freeze up. I can start up in Safe Mode but not Safe Mode with Networking. And when I waited the 40 minutes start my comp up, the Vista said the the "Network cable is unplugged", but it wasn't.
When I disabled the network adapter, my computer froze again.My computer will load up normally the way until it reaches the screen with the green bar and black screen. The green bar will cycle through about two to three times, but then it stops moving. It moves forward just a little bit every 5 minutes though, so if I leave it like that for about 40 minutes then Vista will be able to boot to my desktop. And when I try to restart my computer, it just stays at the 'Shutting Down" screen forever. The longest I've let the shutting down screen just stay there was 20 minutes. I had to cut the power. Anything that has to do with networking seems to make my computer freeze up. I can start up in Safe Mode but not Safe Mode with Networking. And when I waited the 40 minutes start my comp up, the Vista said the the "Network cable is unplugged", but it wasn't. When I disabled the network adapter, my computer froze again.
So I turned my laptop on today and for some reason it would not connect to the internet. I thought it might be the router so I rebooted that and still no luck. When troubleshooting it says; "This computer does not have a wireless network adapter installed and configured" So immediately I think the driver or my adapter has been uninstalled. If your wondering what my adapter was its; Nvidia nForce Networking Controller (x64 Windows Ultimate) I went on there website and found the driver, installed it and still nothing. I also found another program that was installed; Broadcom 802.11 Uninstaller I really need this fixed ,
View 5 Replies View RelatedWhen I check the status of my network adapter, it says that DHCP is not enabled. How do I enable it in Windows Vista Ultimate? I'm trying to enable it for ICS to/with a windows XP Pro computer. The other computer (XP) is not auto configuring itself with the right type of network settings. (IP, Subnet mask, & Gateway) For instance: it will configure itself to use 169.254.37.72, 255.255.0.0 instead of 192.168.0.(2-255), 255.255.255.0, and Default Gateway of 192.168.0.1.
View 4 Replies View Related1. My network has ALWAYS failed upon RESUME FROM SLEEP using a WIRELESS connection via a NETGEAR WN121T wireless-N USB 2.0 adapter, but NOT when using a wired Ethernet connection.
2. It also works perfectly from BOOT via the WN121T wireless connection with my NETGEAR DG834N draft 802.11n (and another 802.11g) wireless modem/router on Windows Vista Ultimate, both with and without the SP1 Release Candidate.
3. But upon resumption from SLEEP, the wireless n/w connection has ALWAYS failed: attempting to re-connect to the network fails, and Device Manager reports for the WN121T that ???Windows has stopped this device because it has reported problems (code 43)???.
4. The only remedy is to REBOOT.
5. The consequences of this are twofold:.........
Problem Blue Screen. No new hardware or software installed recently, last Windows vista update was on 01/15. When I start first, PC passes user registration (boots fine) and
does the normal stuff like loading software and starting the wireless internet connection via Netgear, opening some windows/programms I will close. All normal, but than comes a Blue Screen and very fast shut down of system with restart. Hardly can read the message...Look like Blue Screen appears when to much action is going on like opening of IE and Outlook... or open to many windows... or some bad programm/hardware is booting. But when I restart, restart gives a different blue screens and trouble is much earlier or directly after registering to the system.
But all starting or booting turn slower, real slow now. Start in --safe mode with net working-- the PC works, but the PC can't handle heavy workloads, is really slow in action. I cannot open --My pictures-- to see all picture files displyed on screen (2.7 GB) (the process trying to access the files in safe mode is real slow) and when I attempt to transfer the file to a USB stick, the computer is stopping in middle of action (after 50% transfer)..........
My board is an Asus P5QC...the most unstable board I have ever owned... Anyway, I got this board since November and it was not running it's best but the I had the basics running. In the past 3 months, I have re-installed Vista 9 times I was blaming Vista, but I notice that my BIOS for some weird reason is not displaying some option that I had before. Now my network adapter will not function properly. I tried my old driver and the latest drivers, I installed it the way it is suppose to be installed and well...no success.
I tested all my cat 5 and they are all in good condition. My router is functionning well, seeing that my other computers are working.
I've been doing a clean install of Vista x64 for about a week and have been getting many random blue screens of deaths yesterday I did another clean install and only had about 4 drivers or so installed and I got a BSOD but no dump file was created for some reason so I kept installing more drivers and it work for about 4 hours till it crahsed again this time it gave me a dump file so here are the results.......
View 5 Replies View RelatedI started to have problems with Local Area Connection in Vista, during logon there was two networks identified, one that I had set up and one unrecognized. This was a problem, because it disrupted the DHCP discovery. I have read here that many have the same problem, but so far haven't been able to pinpoint the cause. My solution was to try to disable the network connection and enable it. This seemed to work sometimes, but once I rebooted the machine, the whole network adapter had disappeared from device manager. I tried re-installing the driver but Vista doesn't seem to recognize it. How do I get Vista to install it back?
View 8 Replies View RelatedI have a issue with my Linksys wireless USB adapter. I am trying to use it with Vista Home Premium. After installing software... I plug the adapter in (like directions say) and windows update goes to work. It updates the driver, installs correctly, I then connect to my home network and all is good. My prob is for some reason I lose internet and the USB adapter itself. One time I switched users and lost all. I have tried uninstalling adapter and tried reinstalling by pointing to my D drive (install CD) in hopes of using the driver that's on the installation CD. as soon as it saw everything.. windows update once again gave me the same buggy driver. I have tried to install with UAC disabled... no luck... the Linksys website/support for drivers has the same updated driver. I tried to use an older one but Windows keeps forcing this updated one down my
throat.
I've had voltage issues causing my computer to freeze or reboot during games and dvds. Fixed that and the computer was fine after memtest showing no problems. That was late Dec.
A few days ago, the computer would go to a blue screen saying it's dumping physical memory and then automatically reboots. Thinking my harddisk might be collapsing on me (I have a seagate barracuda 7200.11 500Gb HD with the SD15 firmware, the infamous crash friendly HD), I flash the HD with the SD1A firmware from seagate, then it was fine. 2days later, Catalyst started to cause problems by not responding, so I formated the drive and reinstalled vista ultimate, along with Catalyst, drivers from Mobo manufacturer ASUS, plus a couple of other softwares. That was yesterday, and now I'm getting the same blue screen back, or the computer just freezes.
I commonly get a blue screen. So how do I solve this problem 2ndly, whenever I play music on my WMP, the computer may just hang on me, giving all but zzzz buzzes and the whole screen shows lines.
View 4 Replies View RelatedProblem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 3081
Additional information about the problem:
BCCode: 1000007e
BCP1: C0000005
BCP2: 98DD3A3D
BCP3: 8837B8FC
BCP4: 8837B5F8.......
My one guess is its something to do with the display driver maybe because that has been stuffing up a bit of late, in the way of the screen going black for a couple of seconds then recovering.
I got a Nvidia 8400GS When i got the PC but brought a Sapphire ATI Radeon HD 3870 X2 / 1GB / PCI Express 2.0 / Graphics Card. My brother took out the Nvid card and then formated the PC to make sure that all drivers where uninstalled then put the ATI card in. In divice manager under dispaly adapters there is standard VGA Graphics Adapter and further down the page there is "Other Divices" with Video controller. When it installs these some times the standard VGA Graphics Adapter fail but the video controller succeed but with error. saying. "Incompatable display Adapter has been disabled. At least one display adapter on the system has been disabled because its not compatible with the driver for the VGA adapter". lso i carnt change the resolution above 1024X768. Also my Graphic card is a Sapphier brand but in the windows update its looking for ATI Technologies Inc. - Display - ASUS EAH3870X2 Series
View 9 Replies View RelatedI've had pretty good luck with vista so far but every so often it will blue screen on me and I cant figure out why. The scenario is
1. System startup from power off condition
2. System boots to login screen
3. Blue screen referencing processor timing or something
I have not overclocked or anything everything is vanilla. I would also note that I run hardware diagnostics utilities and it seems fine. Also, I never get the message about abnormal system termination like ususal. How can I get a clue as to what is going on here. So far it seems like the error is bogus, I can log in and the machine will run for days with no problem.
percent user of Vista Ultimate x64 and I have a problem! It gives me this blue screen with this information..................
View 6 Replies View RelatedI got a new pc yesterday, plugged it all in and after downloading the driver for modem worked fine. Untill it started shutting down and a blue screen appeared. I ran the solution checker and it said it was a problem with the driver to the modem.
View 9 Replies View RelatedI have a brand new vaio and when I shut it down last night it "hung" - so finally I switched it off at the plug. Today I cannot get anything other than a blue screen.
Should I take the battery out and try and re-install it or is this something that a computer expert will have to sort out. Its such a pain.
It has become a routine. This dreaded screen (which I've never seen during my seven years with Windows XP) has poped up several times.
Is there a way to see what causes the problem. I was denied access to some mini dumps.
Dell Studio XPS EOM.
It was a nice day (September 2007) and i opened my Windows Vista 32bit Home Premium Laptop, my desktop appeared just fine and while Nod32 was trying to load, my wagtail mouse stopped moving its tail, few seconds later, the "famous" BSOD appeared!
I didnt care really since i could format, ok then i formated. 5 months after the format i was having some crashes, e.g i clicked on Photoshop and the taskbar froze then the same happened to the start button and then the whole desktop! I restarted but i couldn't use Photoshop anymore. Few days later i dragged and dropped something in the recycle
bin and guess what? Yea thats right! I got a Blue Screen! I was freaked out and mad! So then i formated again. Now 2 months later, May of 2008 i opened my laptop and Nod warned me that the dll files of Adobe Flash, Nero and PowerDVD were viruses and that the svchost.exe tried to open them. I ignored them since i knew that the svchost.exe goes crazy sometimes. Then it stopped doing it but i started having crashes like the one i said before the second BSOD. Today i received 4 more crashes but the last one was deadly! I mean like, i only clicked on windows live messenger and vista made that BEEP sound, then everything was frozen,even the mouse!
I'm running Vista Home Premium x64, and got a BSOD yesterday after updating KB915597. I understand that this is just the Windows Defender definition update, and that they recycle the KB#, and I found some posts on this forum from a few months back regarding the issue...I never had it before, but this time, it's got me.
I did a System Restore to before the update, then changed Windows Update settings to "notify but don't download or install." My question is this: Will it ever be safe for me to re-enable Windows Update, or will I always have to do it manually from now on because of this one incompatible update?
