Blank Screen Of First Boot With A Flashing Cursor
Aug 20, 2007
I've done a search for this but it's kind of a hard one to put in to keywords without getting tonnes of results with radically different problems. I bought a new computer a few months ago and bought Vista Ultimate OEM but I still needed XP for work so I just put my old XP harddrive in, played around with installing some drivers and everything worked swell. I had some free time on the weekend though and decided I may as well install Vista now. I chucked the DVD in and booted from it, then began the installation. I've got 3 hard drives, one of them is XP, one is for the bulk of my files and finally one that I cleared everything off of, ready to be formatted and have Vista put on. The installation seems to have gone fine, it unpacked all the files and installed everything. It rebooted, assumedly at the end (I didn't hang around to watch it install for half an hour) and booted in to XP. Cool, so I rebooted again, went to the boot menu and selected the Vista hard drive and then nothing happens. I get a black screen with a white blinking "_" cursor. I went back in to XP and looked on the Vista harddrive and it appeared to have the entire file structure on it. So is there any advice you can give? I'm not quite sure what else to try other than do a completely fresh install.
View 4 Replies
ADVERTISEMENT
Aug 17, 2008
I have a notebook with Windows Vista Home Premium 64-bit on it. The problem is that my boot is take a lot of time. First I get the BIOS screen with the Dell logo that is taking about 3 seconds (so that is good). But the loading bar is taking a lot of time. It is going from left to right for 13 times (This is not normal I think). After that, my screen is going blank for about 10 seconds and then I get a black screen with mouse cursor for about 10 seconds and then again a blank screen for 10 seconds (So a total of 30 seconds, which also not normal). After that I get the vista logo with the sound and the welcome screen, which is taking a long time (for about 25 seconds).
After that I get a blank screen for 20 seconds and then the desktop appears and from now on everything is running fine. So my question is: WHAT is causing this slow boot! I have already read the tutorial 'How to Speed Up Vista Boot Time' and did everyting they said. My startup programs are Kaspersky Internet Security and MSN Messenger. I have enabled superfetch and prefetch and set the registry value on 3. What else can I do to decrease the boot time?
View 6 Replies
View Related
Sep 27, 2009
For about a month now, after I've been sitting here a while, the screen goes black. For the next two or three minutes the screen will flash on for a millisecond, and gradually the frequency will lengthen, and then up to 12 minutes later back to normal. (HP Pavillion bought Nov 07, Vista Home Premium, AgNeovo F=17.)
Last week I thought it might need a new screen driver, so I got one, and for two days no flashes. My other big problem is everything seems to be on a hair-trigger. I'll want to click on whatever, and a box of choices or warning pops up, and I have to hit Escape to get rid of it...........
View 6 Replies
View Related
Nov 11, 2009
I just installed the latest drivers for the graphics card in my laptop, and when I restarted my computer, my cursor became invisible. I can move the mouse and still hover over links and click on things, the only thing is that I can't see the cursor. The cursor moves when I move the mouse, but I can't see it moving...its invisible somehow. Everything worked fine up until I installed the new graphics drivers.
View 5 Replies
View Related
Dec 17, 2009
I have an Acer laptop with Windows Vista Home Edition. Ever since I purchased it I've had a problem with the cursor jumping from one point on the screen to another. I place the cursor on a button or thread I want to open but the cursor jumps to another part of the screen. Also, it locks up some times when I am trying to scroll and the scroll bar takes off like a rocket. Other times I'll be dragging the scroll bar and it will snap back to it's original position.
View 8 Replies
View Related
Jul 20, 2009
how to get rid of the drop down bar which comes down when cursor is near the top of the screen I think its called the "support buttons",it has a habit of staying down.
View 4 Replies
View Related
Mar 18, 2010
my cursor is locked in the center. I have a logitec usb mouse and I have switched to an older mouse with the round plug. I've rebooted with both and get same results. Keyboard does work.
View 6 Replies
View Related
Apr 25, 2009
RIght now im on the same computer on my BItdefender 2009/Iceweasel.So after i get a black sceen with a cursor that i can move where i want but it just stays like that.I tryed all the safe modes and they dont work at all.Plus i dont have a VistaDVD to make it worse.(My Original OS was Windows Vista Home Premium x32)I really dont know where the command prompt is on iceweasel but i know how to use it in vista.
View 7 Replies
View Related
May 5, 2006
The issue is the screen goes nearly black, i.e. everything is still displayed but just really dark, as if the brightness on the monitor has been turned right down. However, the mouse cursor still appears bright white. It seems to occur pretty randomly. It has happened with both the default video drivers and the ATI beta drivers, and it has also occured both before and after the logon screen.
View 5 Replies
View Related
Jul 2, 2008
y cursor spontanius jumps over the screen while i'm not clicking on it. I tried a new mouse but the problem stays the same. I installed the mouse driver again but also the problem stays the same. It's not a virus because I checked that trough a virusscan. Is there anyone of you who knows how I can solve this problem?
View 7 Replies
View Related
Aug 9, 2008
Hey my names Mike and at the moment i have an HP Slimline with Vista Home Premium. (Vista Home Premium was already installed when i bought it) So heres my problem- I bought my comuter a couple months ago and its been working great. But a couple days ago whe i was trying to set up a webcam with software, i was told to restart my computer. fine. Though afterwards when it was booting up and after the Windows logo apeared it said Welcome and then went black with only my mouse cursor.
Im not to tech savey so i'm not to sure what im doing. Ctrl+Alt+Delete does work. Safe Mode Works also (Not really sure what to do in Safe mode though) Also im not sure if it's the new software or a malfunction in my computer but I've tried several times to restart it with no success. I've also tried a system restore with no success either.
View 7 Replies
View Related
May 6, 2009
I have searched this newsgroup (as well as Google) and have found many items which are similar to this situation, but nothing quite exactly the same.
In my office I have 9 of the exact same computer (Dell Optiplex 755),all with the exact same software setup (Vista Enterprise 32bit).This issue is happening on only 1 of the computers (which leads me to believe that this is NOT a driver problem).
The user has her computer set to require a password when the screensaver is activated (normal windows screen saver, not some 3rd party program).
When the screen saver is activated, it locks the computer and the monitor goes black. All is well.
When she is ready to unlock it, she hits alt-cntl-del. 7 out of 8 times, the screen comes back to the logon screen where she can type in her password, and unlock the computer. But 1 time out of 8, the monitor will be totally black except for the arrow for the cursor.
She can move the mouse around fine (indicating the computer itself is ot toasterized).
Things we have tried:
* about 1/2 the time, unplugging the video plug from the computer and
plugging it back in will restore the picture (note that simply turning
the monitor off then back on *never* works).
* typing her password on the black screen will sometimes work (my guess
is that the prompt is in the right place)
Other than this issue, the computer works fine (meaning there aren't
other symptoms that indicate other problems).
View 9 Replies
View Related
Oct 13, 2008
I have a Dell Inspiron notbeook, pre-installed with Vista Home Premium. Apart from what came from the manufacturer, this machines is pretty much clean - that is other than the Trend Micro Security suite installed, there is nothing else. Maybe the Adobe Flash and Adobe reader. I have downloaded the SP1 and installed it. The installation went smooth until it shutdowns and restart - message was something like - 1 of 3 updates... x% It went for about 6 hours apparently idle - the screen is black with the cursor blinking on top left corner and non responsive. I decided to turn it off and when reboot the machine displays a message - Resuming Windows and goes back to a black screen with the cursor on the top left corner and unresponsive.. Tried to reboot in safe mode and it does not work - it just displays a message Resuming Windows and goes back to a black screen...
View 5 Replies
View Related
Jan 3, 2009
i was updating drivers for my motherboard when my desktop froze and i was forced to manually reset, after the reset the computer restarted normally but it was slow on logon and it was weird since it always acts fast, i tryed to finish installing the drivers and it froze up again! so again i restarted, when i did... BLACK SCREEN OF DEATH!!!
when i try to reboot i get the boot choices (start windows normally, safe mode...) and none of them work! is all the same black screen with the cursor, i dnt get a choice of "last good known configuration" either, i tryed pressing ctrl-alt-del and nothing happens! does anyone know how to solve this problem without reinstalling windows? i have 300GB worth of stuff i dont wanna loose!
I tryed the windows vista disc repair procedure and it tells me it cant fix the problem, i try system restore and it tells me there is no restore points set, which it cant be true because a few days ago i opened system restore and saw tons of restore points from before.
View 7 Replies
View Related
Apr 24, 2010
Couple of days back at the time of booting my laptop I pluged in my iphone for charging. As it saw a new drive it started to scandisk it. I unplugged my iphone and restarted my computer as I was in a hurry. The scan was just taking a lot of time. After that my vista is not starting up. It goes and get stuck on a blank screen with the cursor blinking on the top left corner. As I have lost my original repair CD I made a recovery disk by downloading a vista recovery software for X64. Ran that and it did some thing and fixed the problem. But still I cannot boot my vista. It gets stuck on the same screen. Using this disk, system restore and complete recovery is not working either. Any one has any other tricks of making me pass the black screen. :-)
View 7 Replies
View Related
Sep 1, 2008
I've been running Vista for a few months now without much complaint until recently. After booting, the green loading bar is followed by the windows logo before the screen flickers several dark colors and then produces a black screen with a movable cursor. The hard drive light remains unlit after the black screen. Running in safe mode gives the same result. I do not have a repair disk and I would rather not wipe the hard drive with a factory default disk as I have important data on my hard disk.
View 7 Replies
View Related
Feb 19, 2010
My computer is encountering a black screen with a movable cursor after the windows logo on start up and I have no idea what is causing this. When I start from safe mode (safe mode, safe mode with cmd prompt) it does the same thing. One thing that I've noticed is that when I run it in safe mode it stops at crcdisk and continues on to the black screen.
View 5 Replies
View Related
Jul 7, 2008
I can connect my laptop to my computer and get sound and video with absolutely no problem. Where I run into my issue: When it's connected, the TV turn into the monitor and my laptop goes blank. (I believe I selected this option not knowing what the outcome would be when my windows vista laptop was connected to the TV for the very first time). I absolutely dislike that I have to work all my functions through my TV and would like my laptop monitor to display a screen at the same time. Is that possible to undo what I caused?
View 4 Replies
View Related
Mar 23, 2008
I read somewhere that if you go to the Power Options, advanced options, processor power management, and change the value of the minimum processor state to 100%."
View 4 Replies
View Related
Sep 18, 2009
I had 2.5GB of RAM in HP laptop. OS - vista home premium service pack2.
The system works fine.
I upgraded to 4GB RAM(2*2GB). when upgraded to 4GB in bios able to see as ~3.33GB of RAM. I am able to see microsoft progress bar also, but after that the screen is blank and able to hear windows logon sound but no display. The screen is black.
When installed only the new 2GB of RAM the system work fine. So no problem with the new 2GB also. But with 4GB the screen is blank. I have nvidia GeForce 7400 graphics card. Is there any configuration need to be done in vista before installing 4GB of RAM?
View 9 Replies
View Related
Jan 18, 2010
I accidently turned my Dell laptop off while it was performing windows updates. When I restarted the laptop it goes to the login screen and then goes blank (i cant enter the username/password).
I have tried the following:
1. Starting in safe mode (same issue)
2. Using the boot dvd and trying the different options in there (Repair, Restore to safe point, Memory check).
3. Using the boot dvd I have tried several different restore points, including the original store point.
4. I have looked through every forum and every post I can find and cannot find any suggested resolutions.
View 8 Replies
View Related
Apr 5, 2009
If go to Help And Support or click (or use F1 key) for anym windows' applications, the Help & Support Screen comes up but is blank. If type something in search get following message. HELP TOPIC NOT FOUND: "This Content Under Construction". "We Were Unable To Retrieve The required Topic". Have tried all the reg. fixes have seen for restoring Help & Support and ones relevant to this particular error message without success. No other problems with Vista Ultimate and have no idea why or when occurred.
View 7 Replies
View Related
Mar 20, 2009
I have 4 vista 32 bit machines. 1 will update beautifully. When I go to run the Windows update, the other 3 "time out". They sit there with a blank box on the screen for well over 5 minutes, before in sheer frustration, I trash it. I know at least 1 machine is saying it has 350Mb of downloads to do, but when I tell it to start, it does nothing. All are running SP1.
View 4 Replies
View Related
Jan 30, 2009
I have scheduled a chkdsk to take place the next time I restart my computer and when I restarted it, the problem started! After the Boot Screen finished booting nothing happens, the screen stays blank. I have left it for hours and still nothing happens. How can I solve this problem? I also wanted to mention that I have changed my boot screen using this tutorial. I didn't really have any problem after following that tutorial but I only wanted to mention that...
View 4 Replies
View Related
Dec 4, 2009
I recently updated my Vista, using the normal windows update. This made my WHOLE operating system go completely retarded, but once I used safe mode a couple of times it sorted out. I recently installed Ubuntu, so I can dual-boot my laptop. Now, all of a sudden after the Ubuntu install, my windows vista is broken!! I get to the log in screen, and i log in as normal, and then i get to my desktop - which is just a blank white screen with my curser on it. I can press CTRL-ALT-DEL, and i can log off and shut down, but I can not use task manager, and it gives me an error message saying something like 'it can not run' or something.
View 4 Replies
View Related
Oct 12, 2009
Whenever I start my computer (HP Pavilion dv5 laptop) from being shut off or if I choose "restart" from the start menu when Windows Vista (64 bit) opens up it opens up to a blank screen. - I have a curser I can control with the touchpad or mouse (I can't recall what happens to a right click function...) - the screen looks completely black (uniform in color) I need to exit using control+alt+delete and then log off and log back on. Only then will I get the desktop top to show for me.
View 4 Replies
View Related
Mar 3, 2009
Rebuilding my system, new motherboard, optical drives (Sata) new CPU Intel DUAL 8400. Install Windows Settings OK till naming PC, Then Blank screen. No Signal. Changed GPU. No Signal. Removed HDD and reformatted. Replaced , still no Bios, blank screen
View 4 Replies
View Related
Nov 4, 2008
The coordinate of the cursor in my Vista is not at the tip of the arrow, instead it is at the tail of the arrow. When I click a file name, the file underneath would be opened; if move the cursor to the edge of IE, the double head arrow will apear at the bottom-left of the edge.
View 9 Replies
View Related
Jan 2, 2008
i installed my 8800 gts with the cd that came with it...rebooted, but all the monitor shows is a black screen (yes the monitor plug thingy is connected to the new gfx card). since the black screen came up, i switched the input back to the integrated gfx card. how do i disable the onboard (integrated) gfx card so that my comp will detect the 8800gts on startup cuz right now it detects nvidia geforce 6150 se (on board gfx card) even if i uninstall it.
View 5 Replies
View Related
May 17, 2008
Switch on PC, Choose any user from list, after login, i get a black screen. After searching i found my way to the registry using F8->Repair
..->Command promt->regedit.exe
In there i found that the everytime i change
[*HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionExplorerShell*] to explorer.exe, and restart my pc, it changes to *cmd.exe /k start cmd.exe*. i dont know what to do now. The following didnt work:
- CTRL-ALT-DELETE/CRTL-SHFT-ESC to show task manager
- Safe mode
- System restore and repair
View 5 Replies
View Related
Mar 23, 2008
i have a basic Toshiba laptop "new" with the basic Windows Vista on it. For some reason every so often, about twice a day, the screen will suddenly go blank. I can still hear music that im playing or whatever, but the screen is blank and the only way to clear it is to manually push the power button to restart the computer. All i use the laptop for is itunes and surfing the web, checking emails. it has never been dropped. its sits on a desk and doesnt move.
View 8 Replies
View Related
