Automaticaly Turn On Wireless Capability At Startup
Oct 3, 2008
I have a problem with the switch button for my wireless network adapter on my laptop. It doesn't turn the radio on when the laptop restarts. I suppose, it stays on off no matter what the button position is. So at every boot one has to:
- wait until it fails, (so all programs needing network at startup fail too)
- click on the network icon in the system tray, diagnose and repair
- wait for Vista to work out that there is no wireless connectivity,
- click on turn on wireless connectivity then wait until Vista repairs itself.
After that is works happily until the next reboot. I repeat - it is not some software option. The on/off switch doesn't work (nor the function key). Question 1 Can I switch on the connectivity on startup to allow this to happen seamlessly. Is there a cmd command which I can setup to run at startup.
Question 2 Is there some way of creating a shortcut which would allow the click of one button rather than going through the learning experience each time that the connectivity requires to be switched on.
View 9 Replies
ADVERTISEMENT
Mar 23, 2008
a friend has a new sony vaio with vista home premium installed. For some reason it will not connect to my netgear router wirelessly. I have tried everything. I am however not too hot on Vista as this is my first time with it. The adaptor says its on, but when you interegate it and ask why it wont connect it keeps telling me "switch on wireless adaptor capability". In the network connections it is on, the switch on the front right is swiitched on and the wireless network light on the front is on. The network is fine and working as i have my laptop connected to it. All security is present and entered. It seems to be the computer as it doesnt find any networks when there are loads in the area. Am i missing something exceptionally obvious? Does Vista have another "on" switch for this adaptor?
View 5 Replies
View Related
Aug 10, 2009
some of you might recognize me from the windows 7 forums, this is my first post here. I have never used vista except to help my friends so I am not very familiar with it, but it's very close to the windows 7 interface so it's not that hard to learn. My friend has Vista and has a problem with her wireless. she has a lenovo R61i Laptop. the router is linksys WRT54GC. randomly the wireless capability gets disabled even though the physical switch is not changed ( is always on ), this happens usually when the PC is restarted or when the router is restarted. sometimes we restart the PC or the router but it doesn't occur, so I cannot re-create the problem easily.
I googled a bit and saw some people suggesting this could be because the wireless service is not set to automatic, so I checked services and the only service that seems to have to do with the wireless is the WLAN service, and it is set to automatic and started. all we have to do is just do diagnose and vista will say that the solution to the problem is found , which is to enable the wireless capability, so I click on that and it will enable wireless and everything will work. but for my friend is it confusing as she thinks there is a problem with her internet connection or her router, I told her it is a simple bug with vista ( I think ) and I will look for a solution.
So What else can I check? we had limited time today but tomorerow I will try more things, maybe I will try an update for the wireless driver. btw it is an intel built-in wirless. I thought I would ask if any of you have run into an issue like this and what did you do to reslove it. sounds to me like a bug with vista as I said but not really sure...Windows Update is turned on, so I asume the latest updates for vista are installed but i did not check if SP1 is installed or not.
View 5 Replies
View Related
Nov 23, 2009
my laptop keeps going to startup repair whenever i turn it on.it wont let me go any where else and even when it finishes startup repair it goes back and does it all over again. whats the problem??
View 7 Replies
View Related
Apr 10, 2008
I can block startup programs using msconfig, but then when I reboot I always get the "Windows has blocked some startup programs ..." dialog and the icon in my notification area. How do I turn off this notification?
View 5 Replies
View Related
Feb 25, 2010
Everytime I start up my computer, that runs and pops up. How do you turn it off? I never use it.
View 6 Replies
View Related
May 25, 2008
i am a first time wireless user and it says that wireless is off how do i turn it on?
View 5 Replies
View Related
May 31, 2009
I have tried to search for anything related to this and I have posted this statement B4. sorry admins/mods, but the search function brings up nothing relating to my request--- see attached. How to get the Vista Search to find something? this was my solution ( great, but not the same ) anyone else? coper.. something not even close
View 5 Replies
View Related
May 14, 2008
I have a scanner Visioneer one touch 8820 USB that worked good on Windows XP home I was just wondering if it will work on Windows Vista 64 Home Premium if I ran it under capability mode I would hate to have to get a new one
View 4 Replies
View Related
Jun 16, 2009
Is there a way to add gpedit.msc capability to Vista Home Premium?
View 3 Replies
View Related
Mar 23, 2008
I am using Windows Vista Ultiamte SP1. I read that they would be incorporating Firewire 800(1394B)capability with SP1.
View 5 Replies
View Related
Mar 23, 2008
When I was running XP Pro my printer driver allowed me to see my ink levels. When I moved to Vista the old driver no longer worked and the Vista driver did not provide any capability for monitoring ink levels. Does anyone know of a utility that would allow me to see the ink levels in a HP g95 all-in-one printer under the Vista OS?
View 8 Replies
View Related
Mar 23, 2008
I have just purchased a new computer from Dell and assumed I would have some problems learning a new OS, but I did not anticipate the loss of a good applet like Microsoft Fax. I counted on this small program for occasional direct communication with other facilities fax machine. It was quick and easy.
I have a second older Dell computer which I invested with hardware updates in preparation for upgrading to Vista as well. The lack of fax capability in Vista precludes my upgading as I need one machine that can function in a more complete manner. I don't pretend to understand the rationale behind this lack in Vista but I sorely miss the function. Others have teased me about my early adoption of Vista and now I am definitely embarrassed. I sincerely hope Microsoft will reconsider this situation and perhaps at least offer a download correction to improve the functionality of this Vista suite......
View 7 Replies
View Related
May 5, 2008
I am still trying to make a decision about going to Vista. Is there any macro capability in Windows Mail? The absence of macros in Internet Explorer and Outlook Express in Windows XP is a pain. I did not see the word "macro" in the downloaded messages.
View 8 Replies
View Related
Feb 6, 2009
I have my Vista laptop (HP) hooked up to an external monitor, I have been using the sleep mode at night. The laptop is closed and on a shelf that is very hard to get to. I would like to shut it off at night. I can shut it off with the keyboard. Is there any way possibly software controlled to turn it back on? To reach the power button on the laptop you must first raise the lid which there is not room to do
View 9 Replies
View Related
Apr 3, 2009
I am installing a new Gigabyte mobo (MA78GM-US2H) in an HP Media Center Case. The pin layout between the case & mobo is nearly the same except that the HD LED and the Power LED are reversed on the new mobo. The power switch pins are correct. The case does not have reset capability. Does it matter that the two LED pin connectors are reversed or should I attempt to change the wires coming from the case?
View 4 Replies
View Related
Nov 2, 2007
Running Windows Vista Ultimate. Display turns off after about fifteen minutes regardless of whether I am actively using the computer or not. The only way to turn the display back on is to close and then open the lid. This disconnets me from AOL, so I have to sign back on again, and if I was emailing, I might lose my current email. Under Power Options, I have 'Turn off the display' set to Never for both On Battery and Plugged in. Under 'Put the computer to sleep' I have both On battery and Plugged in set to never. Nonetheless, the display still shuts off while I am working. What do I need to do to prevent the display from turning off at odd intervals?
View 6 Replies
View Related
Aug 27, 2009
I am embarrassed to ask it. Previously I had WindowsXP on my laptop - to turn it off you went to Start, Turn Off Computer. This laptop is using Vista, and I cannot find anything comparable. Last night I turned it off using the off-on button, so got the Windows did not shut off properly message when I turned it on; and I have a "thing" about leaving my computer on overnight. Also, is there a way of hiding all the command bars to "hide" like you can with the taskbar on the bottom?
View 6 Replies
View Related
May 23, 2009
I am running Vista 64 and installed a program which apparently had a virus or I got it using IE8. I found an entry in the start up tab that was causing a problem. I went into the registry and deleted the item from the startup tab and I also disabled it in the startup tab. The startup tab still shows the item even though it is disabled and deleted from the registry. Why does it still show in MSCONFIG and how do I delete it from the start up entry
View 5 Replies
View Related
Mar 23, 2008
I have just puchased my first Windows Vista computer - an HP laptop. I have purchased at leat five laptops since 2000 so I am familiar with setup and
comfortable with installations etc. I have three questions here.
1. My last computer had Windows XP and an 80 gb hard drive with 70 gb full - After copying the data only (55 GB) to my new 250 gb hard drive I have only 107 GB remaining of the 222 GB C drive partition. I have not yet added many programs. That tells me that Vista must be using 50-60 GB or more of the drive. Can that be correct?
2. My new computer takes 5-6 minutes to start up. After two minutes I get the welcome screen. Then the monitor goes black for a full two minutes before continuing the startup process. Is this normal for Vista?
3. Occasionally the monitor goes dark for a few seconds and a window pops up saying the display driver has failed but is back. Is this normal?
I certainly gained no speed with this new computer. There are many things I like about Vista. Since I have no previous experience with owning it I am trying to sort out if this computer is a lemon that should be returned or if I should just put up with the downside.
View 9 Replies
View Related
Apr 27, 2008
The last couple of days I had a few times a startup error. It said something like Windows couldn't start normally. Run Startup Recovery (Recommended) Start Windows Normally. I did the Startup Recovery and then it worked again but the next day or so the same thing, otherwise my system runs fine.
View 9 Replies
View Related
Dec 11, 2009
I have forgotten the Username and Password for the Login ID... and it is not the default (Username: *blank* Password: admin). I have heard you can hold the reset button on the back of the wireless router but will this reset my wireless network? By that i mean... will i be able to connect with my laptop still through that wireless network or will i have to set it up again?
View 9 Replies
View Related
Dec 29, 2008
Would over clocking it when your turn on the computer and then before you turn off your computer you put it back to factory settings screw it up???? or what The reason i ask is because when i turn off my computer it gives me the BSOD then the card goes back to factory settings but i can play the OC version of the card
View 4 Replies
View Related
Mar 28, 2009
I Just want to know why my screensaver doesn't work using a Microsoft wireless laser mouse, also microsoft wireless keyboard, windows vista.
View 9 Replies
View Related
Apr 11, 2009
I am using a windows Vista 32 bit home premium notebook computer for which the wireless network detection has stopped working. I updated the driver for the built in wireless card with out any results. I also tried a plug in wireless card which windows detected and said was working properly and this did not work either. This leaves me to believe that something is wrong with the OS. I can get on the internet via dialup modem and also by the ethernet connection with a DSL modem. I have been to several hotspots that I know have wifi and no networks show up. All critical windows updates have been installed.
View 9 Replies
View Related
May 15, 2010
I was wondering, is there really much benefit to connecting via Wireless-N as opposed to Wireless-G? Will I notice the difference? I'm on a 10mbit connection, with a Draft-N router, but my desktop isn't Draft N-compatible, but.. I'm not sure if I'd see much of a difference if it was.
I'm considering NWD-170N Draft N (1.0) 300Mbps Laptop PC Card 91-005-159001B ZyXEL Overview ...
View 7 Replies
View Related
May 25, 2008
Is there any way to turn off UAC, but without having the nagging notification on the taskbar afterwards?
View 7 Replies
View Related
Aug 10, 2009
I have an old-school program that creates its directory at a hard-corded directory in C's root (C:xxx). Now, I don't want to run it with administrative privileges, I changed the directory's security permissions to (everyone - full control) and make them inherited to all its sub-directories. The program reads & writes fine with existing files. But the program creates a c file inside its directory and tries to let a C compiler on a network drive compile it. That 92s when the problem comes in. It creates the c file all right, but the c compiler cannot read it (saying =93permission denied=94). If I turn UAC off, I don 92t get errors, but I don 92t want to turn it off.
View 4 Replies
View Related
May 14, 2010
Windows 3d flip simply keeps switching from the application window to the 3D stack. Any click causes the applications to stack. Click again and the application reopens. Click anywhere in the sindow and I am back at the stack. How do I turn this off?
View 3 Replies
View Related
Feb 16, 2009
I m using vista x64 home premium and when i try to shut down my computer it looks like it is turning off then it starts windows again. Anyone had the same problem or know what to do ?
View 9 Replies
View Related
Mar 31, 2009
I have a dell inspiron 1525 and I have no idea how to turn the touchpad on it off
View 9 Replies
View Related
