Automatically Shut Down After Install Windows Updates
Mar 23, 2008
After updating my windows on 11th March 2008, my computer keeps Automatically shut down by itself each time I tried to log in to windows. Before it shuts down, I saw this message on my screen: "Configuring updates: stage 3 of 3. - 0% completed
Do not turn of your computer." After a few minutes, my computer will automatically shuts down, and it continuously do the same thing over and over again. The updates are not completed and will always shows "0% completed".
I'm wondering if there is a simple way to take your Vista Installation Disc and use it to create a custom installation disc that also includes updated drivers and updated hotfixes. The goal would be that during a clean install, those updated drivers and Windows Updates are installed automatically.
For a specific example, I use a USB Wireless Adapter. If I could create a custom windows disc that includes those drivers, then I my USB Wireless Adapter would be recognized and I could therefore allow Windows to connect to the Internet during Setup to see if there are any hotfixes and updates.
I have two computers running Vista Business. I have them both set up to tell me about updates but not to automatically install them. So, why is one computer telling me that Service Pack 1 is available but the other is not?
In fact, on the one that not telling me SP1 is available, I told it to check for updates and it still did not tell me about SP1 (it said that everything is all up to date). Is there some legitimate reason for this or is this just normal operating procedure? And, BTW, I'm very hesitant to install SP1 of either computer.
I got a bluescreen full of "stuff", it must mean something to someone, when I tried to shut down. My Lenovo 3000 K series would not shut down automatically and I had to turn it off by pressing the Off/On button. The Ethernet network is pointed to.
I am helping a friend install windows updates on her Sony VAIO laptop with Vista Home Premium SP1 installed. Laptop had not been updated since January 2009. All updates completed fine with the exception of KB973565. When installed via automatic windows updates I get the following error...........
Microsoft office 2003 problem. When starting microsoft word on vista ulitmate, there seems to be a problem. This will automatically shut down, saying there was a problem and is shutting down. The other programs seem fine, Excel, powerpoint, etc. I havent a clue what this could be, has anyone else had this problem.
In the top right corner of microsoft word it will say "Finalizing Installation" and then after you type a couple of sentences it will shut down on its own. This is for a friend of mine, who had microsoft office put on when she bought the laptop of a friend, though she does not have the disk. so i wondered if this is an installation problem. Would this be some sort of copy of microsoft office 2003, that was put on for her She has only found this out now as her son needs to use word for school ( vista ultimate, 64 bit, sp2)
I purchased a dell laptop last year and have had numerous issues form the start. It is running the Vista Business operating system. I realize I should have sent the thing back to the factory right away, but I didn't. I would like to reinstall the operating system and start fresh to see if the same issues occur: automatically shuting down, blue / black screen, clock consistantly loosing time, printers not working, yadda, yadda, yadda. I have all the restore disks that came with the computer. What do I need to consider before attempting to take it back to square one?
Will I still get Windows Updates if I don't install the Service packs for Vista & XP? If that happens won't my system be obsolete? remove "nospam" in order to email me.
I have Vista Home Premium 32-bit, on Dell Inspiron 6400. After a repair install, I now have two problems: - Although there are 75 Windows Updates in the list, I have tried several times over the last two days to install these. So far, only a few are marked "Successful". The great majority are marked "Failed". - There is no SP1 available in the list of updates.
Here is the history:
- My laptop was pre-loaded with Vista (no SP1). The OEM DVD was also SP0. - I installed SP1 when it became available. - A few days ago, I neede to do a repair install. So I uninstalled SP1, and did a repair install as specified in Brink's tutorial: Repair Install For Vista - As far as I know, the repair completed successfully. There were no "Files discarded by Windows Upgrade" (Maybe this is important!). I was not asked for my product key, or asked to activate Vista. - Immediately after the repair, I launched Windows Update, and found the two problems noted above.
BTW: To the best of my knowledge, my laptop is working fine. The minor glitches that prompted the repair install have disappeare.
if their updates don't come through after installing sp1? If so, I have windows 32 bit os and it is set to install automatically at 3 am, but my compuer is always asleep then, but when I wake it up in the am, I used to get a windows symbol at the bottom right telling me there is an update avail.! Now, it won't do that after the update to sp1? I just recently changed the time to auto. update at 1 pm, when my computer is turned on, so I am waiting to see if it will do that. I have checked the options and they are set right, I just think that after the install of sp1 my os now does not recognize when there is an update avail.
I have configured my computer to automatically install Windows Important and Recommended Updates. Most Important and Recommended updates are installed automatically. Occasionally when I check Windows Update I get a message that an important update is available and I guess I would have to manually install it. For example, now important update Office Genuine Advantage Notifications is available for me to install. Why are most Windows important updates automatically installed and an occasional Windows important update is made available for me to manually install?
i installed vista 64 bit yesterday on a new macine. its a very erarly copy. i seam to be having isues with the windows updates working. it keeps downloading same files over n over. i had to repair vista start up a couple tijes now. im trying the falowing download of ms website i just hope they right. sp1: Windows6.0-KB936330-X64-wave1.exe sp2: Windows6.0-KB948465-X64.exe if this dosent work
When I try to install updates with Windows Update, I get a message that it's failed and an error code 80070002 (unknown error). I have deleted files in the Windows downloads folders as suggested
I have had many update problems with windows update (including windows vista sp1) due to "Code 80070246." I have tried many things (not including reinstalling OS)...including Stop error when you try to download updates from Windows Update on a computer that is running Windows Vista: "0x80070246"
However when i tried following those steps, i got to step 6 and the Windows AIK Command Prompt said it "cannot find the path specified." I'm pretty sure i have the same error as that one though, meaning a corrupted GlobalInstallOrder.xml file. I don't think it can find that file because I'm using a 64-bit system. Should i try doing the same thing as the microsoft site except replace Windowswinsxsx86_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_07289f4cca5f6990 with Windowswinsxsamd64_microsoft-windows-servicingstack_31bf3856ad364e35_6.0.6000.16386_none_63473ad082bcdac6 or do i have to do something else?
Maybe the problem isn't with GlobalInstallOrder.xml? I'm not really sure what to do.
I am running Windows Vista Home Premium on my laptop. For last few days I have not been able to install windows updates. I get the error with code 80070641. After wandering through different forums and suggested solutions, I followed this path - control panel > system and maintenance > administrative tools > services > windows installer (double clicked and saw that the start-up type is 'Automatic'). When I clicked on the 'Start the service' button in the left panel here, I got the following message:
Windows could not start the windows installer service on local computer. Error 3: The system cannot find the path specified. Can anybody help me resolve this problem and bring the Windows Installer back on track?.....
I can't install Windows updates, every time I try I get this error code - 80246008. All suggestions from Microsoft refers to the BITS service, but this service is not listed in services list, so I really don't know what to do
I can't install windows updates. The are not being installed automatically. I get the error of 80240016. Does this number tell anyone? why I can't install updates?
last night before bed I clicked shutdown and install updates in Vista. I woke up this morning and my computer will not turn on. It leads me to this: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your language settings, and then click "next"
3. Click "repair your computer"
If you do not have this disc, contact your system administrator or computer manufacturer for assisance.
File: BootBCD
Status: 0xc000000f
Info: An error occured while attempting to read the boot configuration data.
problem I have is that I do not have vista installation dvd. I am currently studying abroad in Rome and will take more time than I have to receive the dvd in the mail. None of my friends here have one either, but they all have the same make and model computer that I do. Is it possible for one of them create a installation dvd that I could use? Or could they make a recovery disc that could as least get me to the system recovery options screen?
is it safe to install Windows Updates logged into the machine as standard user (as opposed to a Computer Administrator)? Up until now I have always logged into the machine as the Computer Admin specifically to install updates - but is this necessary?
A friend's Vista SP1 PC is failing to install Windows Updates and also some other updates such as those for Itunes. The symptom is that the updates get downloaded but the installation phase never finishes (he's left it for 12 hours!). In the case of the Windows Updates, there are several updates that try to install themselves as the PC is shutdown or even restarted, but the message "Installing 1 of 6" never advances: the only recourse is to switch the PC off.
As I was looking at the PC, I noticed one thing which may have a bearing on this and may even be the cause: the System Restore applet (windowssystem32 strui.exe) fails to run. It displays an initial User Account Control window but the "Restore System Files and Settings - choose a restore point" window never appears. No error message is displayed and there are no entries in any of the Event Log logs.
It occurred to me that if System Restore is buggered, this might prevent any updates working if the first thing they try to do is to create a restore point before installation begins. I can't find any reference to System Restore failing to open its initial Window - I've looked on support.microsoft.com and done a general Google search for "Vista System Restore fails". All the info seems to describe possible problems if you get slightly further and select a restore point which then fails to install properly.
I recently decided to take a bold leap and upgraded my Vista 32 bit to a 64 bit machine. Th efirst day everything worked beautifully. I downloaded the latest Nforce drivers, creative drivers, and ATI drivers, most of my hardware installed automatically. Now whenever i try to install a USB device such as a simple USB drive, it recognizes a new hardware has been plugged in it tries to install it automatically but it fails!!! The same thing happens when i try to attached a USB hub it tries to install it but fails. Pretty much and usb device i try to intall dose not work. i am using a Microsoft USB bluetooth keyboard that works great (except my keyboard shows up as unknown device), a USB printer that works great but any new USB device fails to install. i am running on a abit KN9 board, AMD 6400 X2, with 6 gigs of ram
I have 3 updates to Vista Business that will not install; SQL Server 2005 Express SP3 (KB955706), Security Update for SQL Server SP2 (KB954606), & a Security Update for PowerPoint 2007 (KB951338). Over the past few months I have tried updating in safe mode, ran upgrade as admin (even thouigh I log in under admin user group), put the Office CD in the drive before updating, updated in safe mode, unregistered the dll's... Other updates install fine.If I had the time I'd reinstall Vista, but I really do not have the time or patience to do that right now.
I have recently installed vista ultimate on my new pc, i did it as an upgrade from xp. Everything works fine and the pc is well up for vista showing a 4.9 in the experience index. The problem i have is that vista has downloaded 33 updates and they will not install, when i click the start button, then the install/ shutdown button it runs through the installing procedure for about 20 minutes than shuts down, when i next reboot the system it says "configuring updates" runs like this for about 20mins then starts as normal. When i check the installed updates, they all show as failed.
I noticed that several weeks ago Microsoft changed the old good Updater to the new buggy one. Sometimes I cannot install updates because I cannot select them! See the screenshots. Week ago my hard drive died, so I bought new and reinstalled everything. Fresh system with old Updater updated well, but then new updater installed, and bug returned. I cannot fix by myself because I have no source code of Updater (Microsoft does not publish source code of their products for unknown reason).
that is my current problem and ive been searching everywhere for a solution and came up empty handed so i decided to post here, maybe someone has my answer. i also try and click the install important updates and does nothing, same with install updates and shut down computer....just freezes >_<
I desperatly try to install this update (Security Update for Windows Vista for x64-based Systems (KB948590)) and the SP1 but i always get the error message,Update failed Code 80073712.
I have tried to install in safe mode but no luck,it seems all the other updates are all ok just these 2 giving me trouble.
I was playing with gears of war and vigas2 and they used to work just fine but now and after instaling few updates it gives me the masseg "Please insert the correct CD-ROM"
I am running Vista x64. My computer is a bit over a year old and all of a sudden as of a few weeks ago I am unable to install any programs or install any updates. Never had any problems before. I am not sure why this is happening but I don't have any viruses, that I know of. A virus scan is clear. When I try to update I get an error code of 80200053
Using automatic install, upgrades KB950124, KB950125, and Vista SP 1 fails. Also since these upgrades were attempted, I lost all audio on my computer. I re-installed software for my Audigy 2ZS sound card and ran diagnostics with "failed" results everytime. My audio faults claim I must re-install and egister "CTTHXCAL.DLL" and "CTSCAL.DLL" files. Are these Windows files or Soundblaster files?
A few minutes ago, a message popped up in the bottom right corner telling me to install Windows updates. I checked and found that Windows wants me to install between 386 and 423 MB of updates -- damn, that's about as much stuff as I have on my HD to start with. These are the updates listed:
-- Office 2003 SP1 -- but I don't run Office 2003 or any components thereof.
-- Microsoft .NET Framework SP1 and Microsoft .NET Framework 3.5 Family Update -- What is this?
-- 2007 Office SP1 -- Maybe I could use this one as I am running Office 2007.