I just got my cable provider to hook up the internet line and now i'm on my own to install the cd and configure the settings for the networking. However, i can't get pass the first part on installing the cd. Here is the error message that I get when the pc tries to run it. So when I try to cancel it and reboot my computer b/c it has crashed,
I am trying to install a second hard drive as a slave.This has its own operating systhem win'98 with alot of info i do not want to lose so i do not want to format it.I have installed the second drive.It registers in the bios.It does not matter wether i set the order for booting to the old disk wth xp on it or the new disc with 98 on it.It does not work.If I try to boot to xp 1st it stalls after it shows the xp front page loading and then i get a black screen.if i try the slave disk as priorty I get a black screen(no loading screen) with two small lines flashing at the top left hand corner.If I dissconnect the slave drive it will boot from xp from the master.
My system was working fine until I installed XP SP2. I am having trouble with a Blue Screen Error "DRIVER_IRQL_NOT_LESS_OR_EQUAL" I believe NVGTS.SYS is the culprit ? I have had to boot in safe made with network to come here to try and get help. Can someone please give me a suggestion as to what might be the issue? I am trying to install this on a new system build, Intel Core 2 Quad Q6600 2.4 GHz, EVGA NForce 780i SLI, 2 gigs of OCz DDR 2 800, Nvidia 8800GTS (G92) 512mb 256-bit GDDR3 PCI-E 2.0 x-16, WD 74 gig Raptor, Liteon 20X DVDR. Thank you~David
I'm having trouble when opening internet explorer it takes forever to load up, once it's loaded however it works at normal speed it always does then if I try to open another window or pop up it once again takes forever. Also I've been having some random pop ups for virus scanners even if I visit safe sites. Is there something I could do to fix this?
I re-formated my sisters computer yesterday, and after installing it i had no internet. As i hadn't installed any drivers yet, i understood that. But after heading over to dell's site, downloading all of the drivers for her computer and then installing them, i STILL do not have any internet. I don't see any connections on the computer either, it's just blank!
Computer went down two weeks ago. I have internet service again but it doesn't quite fit the monitor, the colors are different, and I know there is text missing. I am at a loss as to what to try next.
My OS is Windows XP, and I just did a clean-install for my entire computer from my Windows XP disc. All my drivers are already installed, except for all the ones listed under 'Other Devices'. I particularly need the USB driver listed under Other Devices, because my internet connection is through USB.
I can barely open Internet,have to work hard to open even TechGuy page. My comp is SOOOO slow..I can't open Internet,although I have connection. By the way. I have quite few space on PC AND It seems to me that my problems started yesterday after installing Ares. DAMNED Ares. Now I want to uninstall it ,but can't..Can't even open Ares. I think its what makes my comp slow.
Installed SP 3 on my neighbor's XP machine and the internet didn't work.So I removed it. Internet still didn't work. So I rolled it back to before the SP3 installation using system restore (oddly there was only one restore point, and that was just before the SP3 installation (I think Windows did that as part of the install).
i have just recovered from a very nasty virus on my machine i have reinstalled xp home oem i am able to access the internet using the IE but i am unable to access the internet when trying to activate xp the error is saying that i do not have a internet connection is there any help any one can give i have checked the connection and i am set up for a LAN this is what i have always done and it has worked in the past
When i try to install Microsoft.net framework from WindowsXP CD,it does not do anything.What could i do.Can i find it in the CD,tell me.I dont want to install it from internet or update
Reformatted sons computer and re installed Windows xp. Cannot connect to internet because there are no ethernet controllers, or video, and audio. This I expected and thought all I had to do was download drivers for the MS-7050. I have been at it 6 hrs now and cannot find them! I know I found before but cannot quite remember what I found. Am I looking for the wrong thing to get the controllers etc working? Its a HP dx5150, AMD 64 Athlon. Motherboard is MS-7050 Ver 1.3
I'm in the middle of a basic networking lab and one of my VM's crashed. As our host, we use Windows XP. For virtualization we use VMware Workstation. I had a problem installing the Internet Printing Client for my lab. I got an error saying that there wasn't enough hard drive space. I then shut down my VM and added another hard drive. Upon startup I was greeted with: STOP: c0000218 {Registry File Failure} i did this:Removing the virtual HDD I added before the problems started. Restarting the VM. Restarting the host machine. Trying the VM on another machine. Booting to .iso and using the repair console with the command chkdsk C: /r.
Im downloading right now and since they is alot of trouble on vista its probably not gonna come out for another year or year n half they were gonna resale it summer 2006.
First of all, I'd like to address the fact that this thread is on the wrong board, but I'll be honest and say I picked it because so many people are viewing, and I really need some help. I don't exactly know where to put this thread, so if a mod feels the need to move this, go ahead. I am using Windows XP, though.Anyway, my friend let me have his old headset a few months ago, and it, basically, isn't working very well. For some reason, some days it works decently, and others not at all. I've found out that for the times it does work, I need to have the mic right up to my lips, and even then my friends have a hard time hearing me. My headset is always turned on, and I have the sensitivity all the way up. It's one of those headsets where two jacks come out the end, one a headphone and another a microphone jack. They are both firmly stuck into my motherboard.
I have a copy of XP Pro here on DVD and having trouble getting it to boot. I downloaded setup onto six floppies and they all install fine but when it is time to put in DVD it says something along the lines "you have a faulty cd".I checked it out on another computer and the XP Pro seems to be on it alright but how do I get it to boot.
I had windows 2000 pro. I wanted to do a full format and completely wipe my hard disk, and install windows xp pro. I did it wrong though, and when my comp was on and i was on windows 2000 desktop, I inserted the windows xp cd and chose a new installation. Windows XP installed, however since I did it wrong and did not format, I now have both XP and 2000 on my hard drive. I tried to fix this problem by going into my BIOS and changing the boot order. Currently it is set to boot 1st from my cd rom. However, when I turn it on, it begins to start up, and says hit any key to boot from cd, but when I hit a key it just continues to load windows. the next screen asks me to chose an OS or press F8 to go into advanced setup. However, again it does not let me give it a command to change the highlighted OS, or go into F8. I can still go into my BIOS, and once windows loads up, my key board works fine, but for whatever reason when windows is starting it seems like it's not communicating with my keyboard. I do not have an A drive so I can not boot from there. I tried to reformat within windows, but since I'm asking it to reformat the drive I am already using, it will not do that. All I want to do is format my harddrive and wipe all OS's off and all info, then install XP. Can I do this without A drive, or without it recongizing when I hit a key to boot from cdrom.
I am having trouble with my system. I had recently upgraded my sytem to 2 GB RAM. I click on the folder for viz. when I Click on my computer>>d: folder>file it sould go step by step. But instead of going step by step after I click on back button it directly goes to my computer instead of going like file<<folder<<d:<<my computer And also like Whenever I click on any folder or application it opens up along with the other folder and applications.
i'm having trouble formating my computer i pop in my boot window xp pro sp2 cd and run it and half way through... it pops up a window saying the file corrupted and it ask me to restart the computer and i tried installing windows through desktop + putting in the cd still doesn't work.my computer running SATA Harddrive was wondering if theres any other method i can do to format my OS hard drive.also anyone ever encounter a problem where they idle there computer for couple hours and it freeze ?
First off, this is a legit copy of XP Home, and I've used it and successfully activated it in the past. The problem is that when I click on Activate Windows, this is what appears. I've tried waiting awhile, but this is all the farther it gets. Nothing is sucking resources while it's sitting there, and everything seems to be working just fine otherwise. I really have no idea what to do other than reformat and reinstall everything again.
I just re-installed XP on a different machine. I kept all the files (c: etc) but none of the settings seemed to have saved. WHen i tried to set up my internet connection, I couldn't. I think I need to install the drivers for my ethernet and stuff but I am confused.. i dont have any disks and Im not sure exactly what to look for.How can I find out what drivers I need and how can I get them working with my newly installed xp?
I'm having a few problems which I can't solve, which I assume were caused by CCleaner or Windows CleanUp!. I am running Windows XP Home Edition 2002.I cannot open "Windows Help & Support" from the start menu. If I try to open a help file, I get something similar to:Windows Cannot Open the File mk:@MSITStore: "file path here"I googled for a solution and Microsoft mentioned this solution: http://support.microsoft.com/kb/312456.I already have the correct version of hhctrl.ocx on my computer, so the next step was to register it. Upon doing so, I get the error: "Cannot find regsvr."Lastly, shortcuts to tools in Control Panel>Performance and Maintenance>Administrative Tools don't work.
Can't access so they say to use Internet Explorer or Firefox. No matter what I do I can't find Firefox or Internet Explorer on my computer. SO, I tried to download Internet Explorer but when I try I get a message saying I already have Internet Explorer! When trying to download Firefox, I get a message saying I'm not connected to the internet even though I accessed while on AOL. I am soooo confused. I've heard my friend use Pandora.com on his computer and I'd love to be able to use this service too.
A friend is being pestered by mcafee pop-ups telling her that her firewall needs updating. She does not use mcafee at all . She has Windows XP and its firewall is switched on. When she tried to delete it at 'Install /uninstall programs' it froze the computer. I suggested she start in safe mode and try. Here is her reply to me this morning: You won't believe this, but I have just spent the last 2 hours trying to get rid of mcafee. In safe mode you can remove all but the personal firewall. In normal mode it froze when I tried to remove it. In the windows security section it tells me mcafee personal firewall is on and you can't switch it off there....and under "add/remove programs" it doesn't appear, yet it is still running and still giving constant error messages.
I started up my computer today (Dell, running Windows XP) and it was taking a long time for windows to load. Then I just got a message that said: "An error occured while initializing Active Shield. Your system might be running out of resources or disk space. Please close other applications and try restarting Active Shield". Right now I have no toolbar for windows, and no start menu, it's just empty down there. I just have my desktop icons that I can click on, but I can't move them around on my desktop. I tried to remove the McAffee Active Shield I can't because when I click on "remove" nothing happens and the computer just freezes for a moment. I have plenty of space on my computer so I know that's not a problem.
Some backround info: whenever I used to start my computer before, I would always get an update offer from McAffee which would slow windows down (I couldn't get anything to load if I double clicked on an icon) until I hit cancel. It seemed to just slow things down until I closed the McAffee offer.
my computer didn't star. It's not an overheating issue because everything inside is cool. I managed to get my computer to start a few times and it would get stuck at part where windows plays a noise to symbolise the computer is being started, the sound skips andnasty sounds come from my speakers.
this gave me the idea to go ahead and turn off my speakers andunplug everything. It still all didnt work. Then I went to bed and woke up the nextmorning and tried again. It started right up! then 20 minutes later i realised I didnt have the fan next to it to cool it down so I put the fan back, as soon as i swung the fan around it froze up and wouldn't start.
I didnt have time to mess with it and went to work, came home, still nothing. So I went to school, i just got home and got the idea to move a cable going from my sound card to the front of my computer around. I did that and partially perched it on the outside of my computer so it would stay in one spot. So I beleive the problem stems from my sound card, but i'm not sure if it's just coincidence.
it seems my keyboard is messing up too and I can't space properly or whatever.
Recently I have had trouble just starting up my computer after the computer was in hybernate and then sometimes it would just freeze up. When I shut down and push the computer's on button it took more than a dozen times before it would even come on. What is the cause of this and is there anything I can do to resolve this issue. I at first thought that my monitor was not working but it happened even after I installed a new one.
so i was not sure what i was doing when i was messing around with encrypting files,I have my external hard drive and encrypted around a dozen video files, then my copy of windows xp crashed due to a virus, i lost the previous version of xp due to reformatting, however i would like to access the video files again on my external hard drvie. I do not also remember the password from my previous copy of xp also.
I have installed Windows XP Home on a PC I built.I can install windows just fine, However when i get the 2nd restart it stops on the windows loading screen, the one that has a little blue scrolling bar across the bottom. I ty resetting and it still stops there. I also tried reinstalling windows and it happens each and every time there. What is causing this? I tried two different video cards and nothing, and different Ram. Is it a bad motherboard? Bad Processor, it shouldn't be considering I can get windows to install up to that point.
Takes 4 tries to start my xp pro dell laptop. Getting an error message with blue screen most common error says: BAD POOL HEADER followed by messages and error codes.0x000000008E..ON each restart.error code changes, but still same blue screen.finally it will boot up, but get message that it recovers from a serious error.