Missing Or Corrupt File Spy-ware And Viruses
Jul 19, 2005
My friends computer is packed with spy-ware and viruses. I've been trying to clean it up and now I'm getting this message on start up. "Windows could not start because the following file is either missing or corrupt. windowssystem32configsystem You can attempt to repair this file by running windows setup using the originally setup CD-ROM. Select "r" at the first screen to start repair". What should I do. The computer won't even start up. I don't know if he is running a bootleg version of windows or not. And his setup disk doesn't seem to help. keep from wiping his hard drive.
View 12 Replies
ADVERTISEMENT
Dec 2, 2004
I have fixed this problem in the past in repair mode and i want to do the same with this, but, there is no filename at the end of the statement see below Windows could not start because the following file is corrupt or missing windowssystem32configsystem Can this be fixed in repair mode without having to be reformated or reimaged.
View 4 Replies
View Related
Feb 4, 2005
So my sister gets hold of a computer in the house and ruins it, and here is the dilemma I am facing: I turn on the computer and right away i come to this message....
Windows could not start because the following file is missing or corrupt:
windowssystem32configSYSTEM
Attempt to repair this file by starting Windows Setup using the Original CD-ROM. Select 'r' at the first screen to start repair.
So I enter the cd rom and press 'r' for repair, I choose C:windows, however before it can begin to repair it asks me for an 'Administration Password' which I have no idea of after many attempts.
I do not want to have to format the pc since I have some very important files on it. Any help is appreciated.
View 6 Replies
View Related
Nov 23, 2007
When I turn my laptop on I get the following message The following file is missing or corrupt - please reload the file <windows root>system32hal.dall
View 12 Replies
View Related
Apr 9, 2006
this error shows up. File is missing or corrupt: C:WinntSystem32DriversPci.sys Can I repair the file in windows or do I have to try the disk option?
View 2 Replies
View Related
Aug 22, 2005
I just boot up my computer and a black screen (which i've seen before and has only led to re-install XP) came up saying the following file is missing or corrupt: /system/ntfs32(I don't recall the exact file name - next time I will write it down). But i'm sure many have experience with this.Now somehow I was still able to enter Windows after reboot and F8 (never happened before - i've always had to re-install). What can I do NOW to prevent this next time from happening and perhaps (almost certain actually) having to re-install Windows XP? Can I get that file from somwhere? Am I missing a service Pack? I have SP2 for Windows XP Professional version 2002. (I double checked My Computer>Properties).
View 8 Replies
View Related
Mar 27, 2007
When trying to turn on my computer i get the following message: Windows could not start because the following file is missing or corrupt: Windowssystem32configsystem You can attempts top repair this file by starting Windows Setup using the original Setup CD-ROM Select 'r' at the first screen to start repair. i have done endless searches on my desktop to try to find a step by step out of this problem. i have followed such things as: >>Problem: You turn off your computer one day and then go to restart to find an error message that says: Windows could not start because the following file is missing or corrupt C:windowssystem32configsystem You can attempt to repair this file by starting windows setup using the original setup CD-Rom. Select "r" at the first screen to start repair.
View 14 Replies
View Related
Aug 24, 2005
Winows says file windowssystems32configsystem is corrupt or missing. It says that I can attempt repair using the original setup CD Rom and typing "R" at the first screen. I have an Emachine 4160. It was loaded at time of purchase and only recovery disc were supplied. I can reboot with the recovery disc but " how can I save my pictures "? Attempts to enter safe mode have been unsuccessful.
View 2 Replies
View Related
Sep 21, 2009
I shut down my laptop before I left last night and when I hope, my system didnt shut down all the way and there was a blue screen saying an error had occurred and if this was the first time I had seen the message to shut the ocmputer down and restart it.I did as instructed. When I powered it back up, I recieved a message saying Windows could not start because the following file is missing or corrupt:<Windows root"system32
toskrnl.exe. Please reinstall a copy of the above file.The problem is, I don't have the XP cd as my laptop came pre-installed. A friend suggested I go into the safe mode and do a system restore to the last saved date.
View 1 Replies
View Related
Sep 15, 2006
I have a big problem. My CFOs computer has been messed up with the uninstallation of Norton. The computer will not boot after trying to run Autocheck (file is missing or corrupt) and the gives an error. I tried to use the Windows XP disc and the setup sees the partition but cannot recognise the format.Unfortunatley I don't know any commands in command line / repair console. Does anyone know commands to get the machine to run checks / get the machine to install XP? Formatting is the last option as there are some data on the machine that is not backed up.
View 2 Replies
View Related
Oct 3, 2005
Last night while watching the news, my computer rebooted all on it's own way over on the other side of the room and now I have the following error message. Windows could not start because the folowing file is missing or corrupt System32/drivers/ntfs.sys. I will boot up if I try several times but even after doing a system restore I get the same message plus sometimes I get Windows could not start because the folowing file is missing or corrupt System32/drivers/pci.sys
View 10 Replies
View Related
Jul 28, 2005
I have been getting Norton (Corporate, installed by someone else) notificatons for a few weeks about a Trojan (cache.cachekit) and Norton could not get rid of it. Now I cant boot up and it tells me my file(System32/system/config) is missing or corrupt. I was thinking it was my Trojan I couldnt get rid of, what do you think? Also, my OS was installed by someone else so I didnt have my own disk, however I have ordered one and it should come in a week. If it is my elusive Trojan, for one, how do I get rid of it for good, and also, when I get my disk I dont know exactly what to do to fix the computer. I cant bring it up in safemode either. I have never installed a OS, but I have installed other software-on a properly functoning computer that is. Do I absolutely have to wipe my hardrive clean, and if so, how do I do it?
View 2 Replies
View Related
May 9, 2008
My hard drive crashed on my laptop. I had a running dual boot environment of Win2K and XP. Both the Win2K and XP were backed up with Acronis Ver11. After replacing the hard drive I created the partitions needed for Win2K and XP using a Win2K CD. Formatted and installed Win2k on the first partition. Did a restore of Win2K via Acronics. I used the restore because of the other software I had installed/running on the first partition (Win2K). The XP/OS application I have needs three partitions. The three were created by the Win2K CD and then formatted via Disk Management (Win2K). Next I restored my XP/OS via Acronics on the second partition. Modified the Boot.ini file for both Win2K and XP. The Win2K boots no problem. Selecting XP I get the following error: Missing or corrupt file Windows system32 configsystemd. I did copy in the NTldr and NTDetect from the i386 folder (XP CD), to the XP OS no change.
View 3 Replies
View Related
Jan 25, 2008
Well, I woke up this morning to turn on my computer, and I got an error like this. "windows could not start because the following file is missing or corrupt: windowssystem32configsystem. You can try repairing by using the original windows xp setup cd, press r on the first screen." Well, after scrounging for the xp cd, I put it in and booted from the cd, tried to do a repair install, but the repair option was not available. I could only install another copy of xp (onto the current copy) which I didn't want to do if it means that all my data is lost (I really don't want to lose them again!).I exited and googled up on why repair was not an option (I'm using my laptop btw), and some random dude told another guy with a similar problem to do chkdsk and bootcfg in recovery console. I went into recovery console and kind of played around with bootcfg, and I used the /rebuild function thinking it was repair, and then it asked me to type something and I was confused, so i entered "n" (for no). Well, basically now when I restart I have the option of booting up "Xp Home Edition" or "n", both of which lead to the missing file message, but how did I make two windows? And can I get rid of this "n" windows I made?
View 11 Replies
View Related
Jan 13, 2006
It worked fine for a few days, then I got this blue screen that said I have a system error and that I am missing a file or it is corrupt c:windowssystem32configsystem.Now, this was fine because I thought I knew the answer to this problem, which is incidentally the answer to another recent problem posted on this board, it can be found here:URL...I performed the operation, and again, it was all well and good for a few days.Then I got the same problem again. I used the same solution to make a fix.Then it happened again.So, my question is what's the problem? Do I have a hardware problem? I even used two different WinXp install discs to solve this problem on different occasions since I only needed the recovery console and I thought that the original disc might have become damaged or something.
View 13 Replies
View Related
Jun 3, 2008
When I started up my computer yesterday it said I had a missing or corrupt file and I needed to reinstall windows. So I put my disk in and it said loading files then it said setup is starting windows and then it said loading files. It kept doing this over and over and over. So I took the CD out and tried starting the computer. I got a disk read error. This is where I am now.
View 14 Replies
View Related
Apr 8, 2007
I have encountered another problem!
Ok, so, my computer wouldn't boot up right? I had to repair the installation etc and activate Windows, which I did today. The just recently, I was in safe mode trying to fix the PC, and then it restarted, and now everytime I try to start it up, it says,
The file Windows...../config/SYSTEM is missing or corrupt and it says I have to repair Windows, using the disk.
View 11 Replies
View Related
Jan 23, 2010
While formatting my system i am facing a problem. the system is showing the following problem.
Windows could not start because the following file is missing or corrupt:
<windos root>system32dal.dll.Please re install a copy of above file
View 1 Replies
View Related
Mar 17, 2007
My computer displays this message when booting up:Code: Windows could not start because the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYST EMYou can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM.Select 'r' at the first screen to start repair.The only disk I can think it is refering to is the Operating System disk. It had an option for an automated repair thing but then it asked for a floppy disk - I didn't have one. When if finally came to the window with an option to repair the system, I hit 'r' It then said there was no hard drive available and could not proceed with the repair.
View 2 Replies
View Related
Aug 2, 2005
I have a workstation running XP Pro that displays the following error message.Windows could not start because the following file is missing or corrupt.Windows rootsystem32hal.dll. Please re-install a copy of the above file.I did get the machine to at least prompt me for OS choice, yet Windows 2000 Professional was the only OS option listed..
View 5 Replies
View Related
Jul 18, 2005
Computer is packed with spy-ware and viruses. I've been trying to clean it up and now I'm getting this message on start up. What should I do. The computer won't even start up. He is running a bootleg version of windows. And his setup disk doesn't seem to help. Windows could not start because the following file is either missing or corrupt. windowssystem32configsystem, You can attempt to repair this file by running windows setup using the originally setup CD-ROM. Select "r" at the first screen to start repair.
View 1 Replies
View Related
Jan 21, 2006
I was burning a backup CD and when it was done my comp just froze. When I rebooted it, I got the message: Quote: Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM So then I decided to make boot disks but as I inserted the 4th disk in, I got the message: Quote: File usbehci.sys caused an unexpected error (4096) at line 5897 in d:xpsp1aseootsetupsetup.c
View 12 Replies
View Related
Jul 20, 2005
When I boot my computer I get a message (Windows could not start because the following file is missing or corrupt: (Windows root)system32hal.dll.) Please re-install a copy of the above file. I have tryed a repair with the XP disc but I am not quite sure how to use it as it is all in DOS.
View 12 Replies
View Related
Jul 1, 2008
I am having an issue with my computer obviously. I have a VPR Matrix desktop FT6100 computer. It has windows xp as its operating system. We had a huge storm here last Friday causing a total loss of power. Now, when I turn on the computer I am getting the following error message: Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM then it says please put in restore cd and press "r" for the repair menu. I put in my restore cd and the options were to just do the windows xp files, No Format or Quick Format. The first option the computer said was least destructive so I tried that route and brings me back to the same black screen w/ the same error msg. I went to microsoft.com to print off the instructions for the error msg and I can't even get to where the instructions are talking about. I don't want to lose all my files so I haven't touched the other 2 options on the restore cd. How can I fix this with my system?
View 1 Replies
View Related
Dec 16, 2006
Using Dell Inspiron 1200 with XP Home Edition. Upon turning on computer the following message appears: Windows could not start because the following file is missing or corrupt: <windowsroots>system32hal.dll Please re-install a copy of the above file.
View 3 Replies
View Related
Jun 29, 2008
XP PRO SP2- Recieve the following message upon unsuccessful boot attempt. "WINDOWS COULD NOT START BECAUSE THE FOLLOWING FILE IS MISSING OR CORRUPT: <WINDOWS ROOT> SYSTEM32HAL.DLL (not yelling ) I have tried to boot from my xp pro cd to utilize the recover utility however the computer will not boot from the cd. I able to use a dos boot disk however my keyboard is USB and I cannot find USB drivers to work under dos, so I was unable to do anything at that point. It was my hope that I could work through dos to edit the boot.ini file.
I do not want to reinstall windows. If I have to I will place the hard drive in another computer as a slave and work on it that way but I'd rather not. The only other tower type computer I have other then laptops is running xp home SP2.
View 8 Replies
View Related
Dec 15, 2004
Windows couldnt start because following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. You can attempt to repair file by starting Windows Setup using the original Setup CD-ROM. Select?r? at the first screen to start repair. what do do? takes me to repair consol and then? i tried to fixboot.
View 2 Replies
View Related
Jan 2, 2005
When Windows XP boots up, an error message states that a system file is corrupt or missing. Which command scans Windows system files for missing or corrupt operating systems files and replaces them with the correct Microsoft versions?
View 1 Replies
View Related
Jul 13, 2005
I have a 2.4 2 gig ram and a raid hard drive on my computer with 4 x 80g I'm not that raid literate and a friend helped me set it up but I know my way a bit with computers. The other night all of a sudden the computer froze up and when I tried to restart it I got this message
windowssys32configsystem with the corrupt or missing system file. First I tried getting my windows CD and using the "r" option to repair it but when I do that I get this message "Setup did not find any hard drives on this computer etc..." I was perplexed by this and went into my bios and under primary hardrive it detected nothing. I hit ctrl S for the raid utility and in the raid options it shows the 4 hard drives. I opened the case made sure everything was connected right and the 4 hard drives are hot still.
View 11 Replies
View Related
Aug 9, 2009
Trying to help out the grandparents, who just returned home from a trip. They tried setting up their computer and it is giving them the message about the file missing or corrupt (something similiar to this- I may have the order wrong: c:windowsconfigsystem 32) We printed off the directions from Microsoft for the recovery console. The first two files to copy regarding system and software indicate they "cannot be copied" however, the last three were able to be copied. I stopped my efforts there since the first two didn't work. I noticed a prior post indicated I could ignore the first two copy commands, is that correct? Or can I try a repair in the reinstall option? What should I try first? Unhooking the printer/speakers? Hardware issue? If that fails, try F8 and use last known configuration? If that works, do I do a system restore? When would I use "safe mode?" We are at different houses w/o wireless so I am trying to get all info I can before heading back over there.
View 6 Replies
View Related
May 3, 2006
I have an old computer with an Intel Celeron 467 MHz processor, 128 ram and I'm running Windows XP SP2. Earlier this week I came to turn on my computer, and could not log on to Windows. "Windows could not start because the follwing file is missing or corrupt Windowssystem32configsystem." I reinstalled XP. I couln't access the repair install. Then I thought maybe someone had gotten into my computer and I downloaded Zone Alarm...Big mistake. Since then my computer freezes, programs jam, I keep losing my internet connection,(DSL) and I get "cannot find server" messages. Its also slower as molasses in winter. A little better since the removal. Obviously Zone Alarm was removed and i went back to Windows firewall. I also use Ad-Aware, AVG, Spybot Search and Destroy, Spyware Blaster and I use Registry Mechanic and TuneUp Utilities.
View 14 Replies
View Related
