I am having big big trouble and I need help bad.. This is what Im getting /windows/system32/config/system This is on my desktop Its a Dell 2350
My boss told me to press F8 and take it where it says Use last known good configuration....I did that but Im still getting a message windows could not start ref missing or corrupt file It said for me to start windows set up by using the original CD-Rom.... The only CD roms I can find for my desktop is this one.
My pc won't boot into windows...i get this error. I don't have a copy of XP to try and repair because i bought my PC from futureshop with XP pre-loaded..... anyway of fixing this without having a copy of xp?
while logged into Windows, the IDE cable that is connected to my HD went bad. I double checked this by replacing the cable and seeing if the BIOS could see it, which it could. When I tried to log back into Windows however I got this message. Code: Windows could not start becuase the following file is missing or corrupt:WINDOWSSYSTEM32CONFIGSYSTEMYou can attempt to repair this file by starting Windows Setup using the orginal Setup CD-ROM.Select 'r' at the first screen to start repair.I'm not sure how this works. Do I hit 'r' at the blue screen after it loads all the drivers or do let it setup and I will get a chance to choose a repair option. The error only effects Windows. I know for sure because I have a Linux partition that works fine. I have my orgainl Windows XP CD- ROM. Does anyone know the steps to fix this? Windows XP SP2 (Fully upgraded)(CD-ROM is the orginal XP SP1 disk)
my file windows/system32/config/system is corrupt. it says i can boot with the CD and use the "R"epair function. I do that and it takes me to DOS where I can roam around my harddrive and the windows CD. now how do I find this file to replace it? because on the windwos CD there is no "system" file in the directory I386/system32/config/. I've tried to copy it from my other computer, but since it's using the file I cant'!
I have a IBM comnputer and I used my sisters reboot disks. She has a set of five disks to use.. they say IBM/Leveno ghost. When I tried to wipe my system clean and reboot, it said "the following file is missing or corrupt" /WINDOWS/system32/config/SYSTEM
Trying to repair my son's laptop--Dell Inspiron 6000 running XP professional, cannot start-up due to above error message.tried steps outlined in link below from Microsoft, but get "access is denied" at every prompt
I am new at this so I will try and post as much relevant (or possibly no) information in hopes not to waste anyone's time. I receive the following message each time I boot up my Dell Latitude 400 with Windows XP update with SP1 and 2: Windows could not start because the following file is corrupt or missing: windowssystem32configsystem. You can attempt to repair this file starting Windows Setup using the original Setup cd-rom. select "r" at the first screen to start repair.
So I was working with adobe photoshop and it absolutely refused to exit. I tried ctrl+alt+delete and after about twenty minutes it was still frozen on my screen. So I tried shutting the computer down normally, and it froze on the "Windows is shutting down" screen for like, the fiftieth time. So I had to force it off by holding down the power button. When I turned it back on to continue working, I got a message saying windows/system32/config (or something like that) was missing or corrupt. I pressed "r" since I don't know where my startup disk is and it restarted.
I have Norton GoBack, so I hit the space-bar to allow it to restore to about an hour earlier before I opened photoshop. This wasn't the first time this had happened. I've been getting the same message at every other start up for a couple weeks and this method worked fine every time. It seemed to be okay this time too but then it just RESTARTED for no apparent reason. When it got to the Norton GoBack screen I got a message saying the system had become unstable and needed to start over, and it suggested it was possibly because of a bug in an application or a hardware problem which is also possible.
My problem started when I booted my computer. Windows (XP Home Edition) started with the message that windows/system32/config/system.sav was missing or corrupt. It told me to use the recovery console to solve the problem. I saw with the recovery console that the system.sav file wasn't missing so it had to be corrupt (0 bytes in filesize).
I was exiting a game and windows started getting really slow and i could not click on anything so i held my power button on my computer and shut it off. When I started it again it said "Windows could not start because the following file is missing or corrupt: windowssystem32configsystem" then it says I can put my original CD in and go to the recovery console. When I did this I got to the first step in a tutorial online where I type "copy c:windowsystem.... etc"
When booting a computer comes up with a message saying that the following file is either missing or corrupt...C:WINDOWSsystem32configSystem It then sits there! Doin' nothing btw, the same happens in both normal and safe modes, last known good conficuration does not help, plus it also freezes when trying to log on to the recovery console.
Windows could not start because the following file is missing or corrupt: /windows/system32/config/system It states that I can put in the originial setup CD-ROM and select 'r' to start repair but that doesn't help me. My laptop did not come with a windows cd as I bought it preloaded from BestBuy. So about 4 years ago when my computer was overcome with the Sasser worm, I reformatted and loaded a friend of mine's Win XP Pro cd on my laptop. I still have the CD but when I hit 'r' (Boot partition recovery) it does its little DOS thing and then gives me a Disk I/O Error. I am thinking that maybe it is trying to boot from a floppy drive and not my CD drive and thats why I am getting the I/O error?
I have a laptop, a Dell latitude d610 that says:Windows could not start because the following file is missing or corrupt: windowssystem32configsystem I attempted to try the fix listed here:http://support.microsoft.com/kb/307545 but when I went to copy using the command: copy c:windowssystem32configsystem c:window mpsystem.bak into the tmp directory I created it said: File could not be copied.
So i booted my t400 ibm laptop and this error message popped up as stated in the message title.My harddrive is in achi mode and i was wondering if i switch the harddrive mode and do a repair with an xp cd, will i lose any files?
Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM This is the error message i have. I have a copy of windows xp pro. i have no backup disk.
corrupt: windowssystem32configsystem ususally when i get this error i format the machine because i hate having to deal with the problem; im the tech guy at a school and i replaced the teachers machine with a new one, i was about to format this when she came in here last minute frantic because she has important accounting information on her local C: drive. she knows she is suppsed to save ALL IMPORTANT nfo on her networkd drive but shes a mornon and doesnt follow instructions. i don't have my copyh of knoppix so can somebodyh tell me a quick fix for this?
When I start up my laptop, the screen immediatly says Windows could not start because the following file is missing or corrupt: windowssystem32configsystem You can attempt to repair this file by starting Windows Setup using the original Setup CD-ROM. Select 'r' at the first screen to start repair.The deal is I dont have the cd. IF someone could tell me how to get an xp cd (without buying) that'd be great.
my laptop stopped working. After dwld some Excel service pack the pc refused to restart. The message is quite ominous: Stop error c0000218 and the hive affected is system root/system32/config/default It's impossible to recover the last working config or start in safe mode or do anything. It keeps looping back to the blue screen with the stop error. The pc does not recognize the hard drive, it does not have a recovery cd.
I was playing Medieval II: Total War and the computer crashes. Then when I try to boot it up I get Windows could not start because the following file is missing or corrupt: WINDOWSSYSTEM32CONFIGSYSTEM. I've checked BIOS for the boot procedure, and everything seems to be in order. I then go through the regular procedure of putting in the CD to run the repair. I boot from the CD, it loads up fine... but there are no partitions and no option to enter the recovery console (which I've read so many wonderful things about).
So now I'm sort of stuck. There's no options other than install and delete the selected (none) partition. If I hit delete (b/c in anger sometimes I'm an idiot) it tells me it's a system partition and there could be VALUABLE system information like AN OS (I'm fuming at this point). NO... I did not delete it. If I hit install, I get a bunch of bogus about how "Setup cannot install to the selected partition.
When I turn on comp. get the mssg: Windows couldn't start following file missing <Windows root>/system32/hal.dll Reinstall copy of file Recovery does not work. Tried to boot from a cd (changed BIOS to cd as 1st boot device) with win xp setup boot disk downloaded from MS site. Get same error mssg.
when i get my Dell Inspiron E1705 to boot from my windows xp cd it goes through the screen where xp is trying install all the raid drivers etc.. before i can actually access my two hard drives delete them and create a new partion. right when its about to get to that screen i get the blue screen of death. well i have been reading around i read that going into my bios and changing my hard drive config to sata auto detect will fix my problem.
well i went into my bios and i do not have any sort of options when it comes to my system to hard drive configuration so im assuming if i do not have this feature or option that i have a IDE hard drive not sata. so if this is my situation how do i get my computer to stop going to the blue screen of death before i get to the screen where i can delete my partion
For some reason when ever I start up the folder "system32" appears on my desktop. It's not a big deal it's more annoying than anything but I'm sure when I go to START UP what uncheck to stop this from popping up everytime.
I have a copy of windows but I don't want to have to reformat my drive. I have gone into the recovery thing from the xp disk bit that's as far as I can go. I don't know how to use the command prompt
I followed Norton and the one thing I can't fix is the wininet.DLL. It runs in safe mode and will not delete. How do I get this thing out? I fixed the registry(Norton instructions) and cleaned everything else. When windows XP Pro starts, I get a message that "sysinit32z.exe cannot be found. Should I put down the hijackthis log in here too?
I am getting the following error and it loops: "file is missing or corrupt windows root system32 hal.dll" When I try and run the windows cd and either wipe or repair the error it tells me that the "the setup did not find hard drive disks" Now I am thinking the hard drive is defective?? Or do I have a virus?
On startup, the System32 folder pops up on the desktop in full screen. Also happens sometimes when starting IE and AOL.Where in the registry do I look for the cause of this?
while running a scan with ad-aware it seemed to trigger an alert from norton antivirus(i know) that a virus had been detected, the ad-aware scan came up clean as did a spybot scan but im still left with the virus which is a trojan horse called c:/windows/system32/test3adll, now im not exactly sure what the best course of action should be, would i be right in entering the file details in the search bar of the start menu, making a floppy of the file just in case its needed for some other purpose, switching off system restore while i delete it and immediately switching system restore back on, any advice/help in dealing with this problem will be much appreciated
Windows xp crashed, wont even open. I get an error: <windows root> / system32/hal.dll is missing or corrupt. I dont have a xp disk, it did not come with the pc when i bought it. Came with xp already on it.
My computer, a dell dimension 8400 with windows xp home edition, keeps coming up with an error saying:Windows XP could not start because the following file is missing or corrupt: WINDOWSSYSTEM32Configsystem.i ran boot utility and scanned the computer and the drives come up fine with the test(except the hard disk which popped up errors on a constant.)
