"Verifying DMI Pool Data...disk Failure"
Nov 8, 2007
"Verifying DMI Pool Data ... Disk Boot Failure, Insert System Disk and Press Enter". It is or was running on Windows XP. It was fine one day and the next it just gave me this message. Restarting it did nothing. When I press enter it just tells me "Disk boot Failure, Insert Disk and Press Enter". Aside from that it doesn't let me do anything. I can't run it in safe mode or do anything at all. I'm not sure if it might be a virus or if something else is affecting it.
View 2 Replies
ADVERTISEMENT
Dec 9, 2006
Verifing DMI Pool Data.BOOT DISK FAILURE, INSERT SYSTEM DISK AND PRESS ENTER I am getting this error right after Verifing DMI Pool Data........message. When I insert XP Install disk and press enter I can get to the recovery console but not sure of what switches to run to bring my XP windows back.
View 3 Replies
View Related
Aug 22, 2005
A USB 2.0 Lexar Card Reader and when the card reader is connected to my computer before booting up, I get this: USB Storage Device: Lexar Media Inc. PCI device listing, Verifying DMI Pool Data, Boot from CD. But when this card reader is disconnected before booting my computer, the computer boots up normally. I would like to know why I have to disconnect this card reader everytime I want to boot up the computer.
View 6 Replies
View Related
Sep 19, 2005
im installing xp on my uncles computer, right now...pluged everything in but i forgot the keyboard i plugged in was dead,so i restarted with working keyboard and now its stuck....on.... "Verifying DMI pool data........." and not doing anything..
View 6 Replies
View Related
Apr 14, 2008
After several hardware failures I installed windows.
But it wont boot, it stops at "Verifying DMI Pool Data"
I've tried a lot of things including:
Reinstall windows- didn't work
Reset the CMOS- Didn't work, but this time it says Verifying DMI Pool Data......Update Success then nothing.
Tried only one ram stick (I have 4 gigs)- got the update success thing again
Checked boot settings and checked drive settings- everything was right.
View 2 Replies
View Related
Jan 30, 2008
Ok, here is the situation, I want to know is there a way to repair or reinstall windows like this http://forums.techguy.org/windows-nt...l-windows.html Instead of booting with a XP Installation CD just putting in the cd and installing? Would a upgrade work? I use NTFS... The reason why I want to not boot with the CD is because I keep getting Verifying DMI Pool Data but instead of it sitting there forever like that, like most people, it shows the options like boot with safe mode or normal or safe mode with command prompt.
View 1 Replies
View Related
Jan 5, 2007
Windows XP Pro Problem began today.farlier today, the PC had booted to a disk reading error, using HDD #1, see below.I put in HDD #2 & life was good. When I had a chance to work on the problem [ disk reading error ] the BSOD & "bad_pool_data" error appeared.0x000000C2 [ 0x00000043, 0xDAE3E000, 0x00000000, 0x00000000 ]I have read http://support.microsoft.com/kb/314492/EN-US/ .The solution described is "Greek to me".The same problem appeared on HDD #2, so I thought I had bad ram.
I tested the ram; swapped it out AND ran diags.
View 11 Replies
View Related
Nov 8, 2009
Getting error message when trying to change out a 10 gig to a 250.NVIDIA Boot Agent 201.0462 PXE-E61: Media Test Failure, check cable PXE-M0F: Exiting NVIDIA Boot Agent DISK BOOT FAILUR, INSERT SYSTEM DISK AND PRESS ENTER" this drive I am upgrading also has Windows XP OS. I have another drive on the computer that has 160g.
View 13 Replies
View Related
Jun 23, 2009
What can I possibly do to solve this problem? I have Windows XP and everywhere.
View 1 Replies
View Related
Oct 30, 2009
I get a blue screen with following error. STOP: C0000218 {Registry File Failure} The registry cannot load the hive (file):System RootSystem32ConfigSECURITY or its log or alternate. It is corrupt, absent, or not writable. I tried starting in Safe Mode same error! Also tried starting with Last Known Good Configuration again same error!
View 1 Replies
View Related
Oct 15, 2009
My external hard drive has suddenly stopped working.My computer can see the drive (but not the drive label) and the shortcut I have for the drive will open it but when it does there is nothing there.I have downloaded a few so called free data recovery pieces of software and they can all see the data on my drive with no problems, even stuff I'd previously deleted seems to be available for recovery, however, as soon as you try to recover the data these "free to use" tools need to be registered and paid for.
View 12 Replies
View Related
Nov 9, 2007
Starting benq 500E scanner I encountered the following message: read image data failure 2882:1118. I know I've got the right driver installed, because it's the newest version and it always worked.
View 8 Replies
View Related
Dec 28, 2005
Hey, have built a new pc, but am using the same hd as my old one, when booting i get a "disk boot failure insert system disk and press enter" however when i press enter it boots up, not really a big problem just annoying and i wonderd if anyone could help get rid of it.
View 4 Replies
View Related
Aug 29, 2006
I have 2 hdds on my system and windows xp crashed and would not recover from main drive so in an effort to save my data I loaded windows on secondary drive which worked, and gave me access to the old drive, all files were in tact and so I tryed to use windows recovery on winXP cd to no avail. When I try to boot from the original drive I get "boot disk failure, insert system disk and press enter" The thing that makes no sense is that I have rewritten the boot sector and mbr I also used the automatic recovery feature on the windows install disk and all looked like it went fine but still no boot
View 2 Replies
View Related
Sep 15, 2009
I have created a Bart PE bootable XP cd. I can boot into windows using this CD I would like to know how to copy the data in my hard disk to pen drive or flash drive.
View 11 Replies
View Related
Oct 17, 2005
My dad sent my daughter a "E Machine" with XP Home. Before he sent it, he transferred all of his personal files. When I hooked it up, the screen said "Boot disk failure. Insert system disk and hit enter". The company sent us a new set of bootable CDs as we thought the problem might be in the CD.
View 14 Replies
View Related
Aug 4, 2009
For some reason my other computer i dont understand it alot but when it comes to a Disk Boot Failur, enter system disk and press enter i usually just shutdown computer plug out the wait around 5-10mins but for this time it has really driven me up the wall. at the moment now it hasnt worked and im asking for help here are some of the things i did... like i said before jst left it and wait... putting OS disk in and try to repair didnt work... try to reinstall didnt work it said it cant OS system something like that... changing my boot system to have HDD first and than CD-ROM than floppy (yes i do have a floppy drive).. but one thing it had told me Win XP when i first tried to repair it it said you have to quite when it count down on when to reboot it said if you have a floopy disk unplug it out and i did it and still not working.
View 7 Replies
View Related
Jun 16, 2005
I'm on a Sony VAIO with Windows XP. When my computer goes into hibernation mode and I try to reboot, I get an error that says, "The system could not be restarted from its previous location due to a read failure." There is one option for me to select which reads "Delete restoration data and proceed to system boot menu."I've done a check disk of all of my hard drives, and none of them turned up anything. Any help would be greatly appreciated, thanks!
View 2 Replies
View Related
Nov 6, 2007
so my computer is coming up with this message on a black screen. "Disk boot Failure, Insert boot disk and press enter." What is this? What does this mean? I just downloaded a "Regicure" to clean up my PC because it was running very slow and wouldnt open some of my files. Everything seem to be ok, untill this morning. Now i dont know what to do. It wont even boot. That black screen is all i get. Please help me! I purchased this computer in Feb."07. Its not even a year old.
View 14 Replies
View Related
Aug 6, 2005
Trying to hook up computer to wireless.Computer has been sitting in closet for 6 months. Worked great when taken down. Now when I hook up I get "Disk boot Failure".Any help will be greatly appreciated. Telling me that IDE Master none if that means anything.
View 8 Replies
View Related
Jul 6, 2006
Hey guys, as u gather my nakme is stresseoutsandy for a reason, i recently bought a diy kit ocmputer and builllt it up then when i turn it on it says boot disk failure: mplease insert system disk and press enter,when in do so it loads then goes back to the same screen.could this be because the xp disc is a copy ? or is my computer broken?
View 6 Replies
View Related
Dec 5, 2004
I am trying to help my son with his computer. I hooked it up and got the following message:Disk Boot Failure Insert System Disk and Press Enter I inserted his Windows XP Pro (SP1) disk and it started doing it's thing. When it finished, it asked if I wanted to install or repair. I tried both and got the same message - that Win. XP Pro couldn't find the hard disk drive.
View 13 Replies
View Related
Feb 27, 2008
I've had this computer for a year and a half, and this is the third time it's done this. I want to know if it's something I can fix on my own - I dont' know much about computers at all. To get into setup, I have to press F1 from the start up menu. If I don't do that, it takes me to a black screen where it says, Disk Boot Failure, please insert system disk and press enter. I have taken this computer to a repair shop, where I have been charged 200 dollars each time I get this message. Please advise me on what I should do, or if I'm doing something wrong? I have windows XP and it has only one DVD/CD drive, no floppy or anything like that. It started doing it this time when it froze and then I pressed cntrl-alt-delete and got the above error message.
View 5 Replies
View Related
Jun 6, 2005
I just built a computer today, and I'm trying to install Windows XP Pro with SP2. The CD boots fine, but once I have done the initial setup I get a Disk Boot Error every time I restart, unless I manually intervene and again boot from the CD (in which case I can finish the installation and everything works fine, except that I can only boot from the CD).I have done some searching, but although lots of people have had similar problems, I'm not finding a solution that works for me.
View 1 Replies
View Related
Jun 22, 2006
Well everytime I SHUTDOWN my PC after a while, Lets say 2hours+ I get a "Disk Boot failure - Please insert system disk to continue" message, BEFORE windows loads, Before I started to panic I just restarted my PC and then it seems to boot normaly and quickly, If I leave my PC on Standby for a while, It comes back fine and ready, I play lots of games from my harddrive so I doubt its hardware failure. I have ran virus scans and spyware scans, Im clean. My boot sequence is, Floppy : CD drive : Harddrive : N/A. I dont have a CD in my drive at the time I boot.What is wrong? Why does a simple restart make it function correctly? Is it my boot sequence?
View 14 Replies
View Related
Jun 17, 2010
When I start my non-brand PC with an MSI mobo I receive the following message:disk boot failure insert system disk and press enterAt first I thought it was the SATA hard drive but when hooked up to another machine I can see all the files. When I went into the Phoenix/Award Bios all the drives are IDE drives. Not an SATA drive option anywhere. The computer was working great for a number of years. I hooked a brand new SATA drive and the BIOS does not recognize the drive.
View 7 Replies
View Related
Jul 12, 2009
I keep getting this message everytime I try to turn the computer on. It will occasionally begin to start up but then will automatically reboot and I will get the Disk boot failure - Insert system disk and press Enter message again. I read the old posts on this but I have not been installing anything new.
View 8 Replies
View Related
Sep 6, 2010
i see this message comes on my screen that there is a boot failure and that two files are missing.i must then insert system disk and press enter,then the system goes through setup,after finishing this process it takes a good time for windows to get going.but my problem is when i closed windows and restart my computer iam getting the same message that i must insert system disk and press enter,can you say what is happening. i am using windows xp professional service pack 2
View 1 Replies
View Related
Jul 14, 2010
i have got the same problem....but when i insert a windows xp cd it is unable to detect it so the problem continues to be there itself...and more over i am using gigabyte mother board.and if i insert that cd.the monitor displays"FD 1.44MB System type(13)"gigabyte bootCD loader. press any key to boot from CD-ROM"
when i press a key...it shows.."hard drive not installed properly press any key to restart"
View 4 Replies
View Related
Dec 22, 2008
About 2-3 weeks ago my computer started playing up, i switched it on and it came up with disk boot failure, so i restarted the computer and it started up fine.. a few days later i got a blue screen message, didn't have enough time to read it, ever since the computer starts up to disk boot failure and i restart and it works, i do that every day to use it. Today however i restarted and it was freezing, wouldn't let me into BIOS setup, or anything, but after a few restarts it worked again.. about 10minutes ago the computer came up with a blue screen as i left the room, i didn't have enough time to see all of it but i got, 0x000000f4 (0x00000003 couldnt get the rest, and something about physical memory dump. i had to restart again about 3 or 4 times before it worked, and when i got through the computer froze.
View 1 Replies
View Related
Aug 7, 2009
My problem is when I turn on my Dell 5100 I get a floppy disk failure message and it instructs me to hit f-1 which then allows me to boot up. I dont have a floppy disk and this is slowing start up. What can I do to fix this? I went into Bios to try and fix this, nothing has worked. Also when I attempt to start windows media center it crashes.
View 6 Replies
View Related
