Unable To Access 250Gb Drive
Jun 20, 2007
have a duel boot system with a legacy windows 2000 installation and a Windows XP Proffessional(SP2),I am able to access a 250GB second drive thru the windows 2000 installation but not with the XP.The Boot drive is 80Gb WD drive, and usually runs with another 80Gb WD drive. All drives are NTFS.I have SP2 installed with XP and understooed that access to large hard drives was set to default with the install of SP1.I have tryed to use the support pages at M$ which state that I need atapi.sys drivers (non existant in my XP), But the fix which they give won't install due to me having SP2 already.I think i just need to install latest atapi drivers and change the registry to enable large hard drives but i'm perplexed as to why they arn't already there.
View 7 Replies
ADVERTISEMENT
Nov 30, 2004
My daughter and I installed her new 250 GB hd yesterday and installed XP; everything seems fine except the computer says 230 free of 232 GB, and it is a 250. The computer is a Dell Dimension 4300, 1.7 Mhz Intel Pentium 4, 700 RAM (512 + 254?).
View 14 Replies
View Related
Mar 5, 2008
Ongoing USB problem. WinXP Pro system new Dell Vostro. Finally able to split the drive to 2 partitions. When 1st installing the drive the windows found new hardware and assigned letters. Worked great. At end of day i logged off the Vostro unit and turned off the USB drive. Next morning at sign on the USB drive was not functional until several connect and disconnect attempts. The device would show in the hardware manager and sometimes have yellow triangle and other times would appear as this device is working properly but no assigned letters.
View 4 Replies
View Related
Jan 6, 2008
I bought the drive came home and installed in on a PC with XP SP_2.Stated the machine and it took forever to load up windows ( not normally like this )Went to start to transfer files over , and no disc to be found anywhere (?)Start/MyPc/properties/hardwareTab/device manager/ and there is nothing to indicate there is a USB hd connected to my machine .right click mypc/manage/discManagement and still no disc shows up in the menu .(?)restart the PC .NOW for the first time ever my pc takes forever to shut down and restart .when the pc restarts repeat the above and still no disc to be found anywhere .while plugged in and connected to the machine i unplug the power to the drive and plug it back in , now outta nowhere XP says it has found a new Seagate drive . YAY right , wrong. i restart my machine and the slow shutDown and restart is still happening (thumbs down )when the pc restarts ( finally ) i check the shortCut i made for the HD on my desktop , no hd icon just a grey box with a Question mark . so i unplug and plug the power cable as i did before and bang there it is again ( the hd).
View 5 Replies
View Related
Feb 9, 2005
I have recently fitted a Hitachi Deskstar 250gb Hard drive(model:HDS722525VLAT80) to my computer.After Re-instaling windows (xp) the drive was showing as 125gb.I have been told this is because windows xp will only support 125gb without service pack 2.I have now downloaded SP2. but it still shows as 125gb.
View 1 Replies
View Related
Feb 23, 2006
Hi Folks, I have a Dell Optiplex GX240 running Windows XP Pro with 512MB memory. I currently have a 40GB hard drive in there. I want to know if it can handle a 250GB hard drive. Any help will be greatly appreciated. I'm considering the Western Digital Hard Drive.
View 12 Replies
View Related
Jul 17, 2009
These two folders appeared some time back on my 250GB internal storage drive. The names of the folder are 15 characters long and are alphanumeric and have one subfolder in each named i386. And are ?0? in size. I first tried shift delete, ?Can?t remove access denied? I download and tried Erase. First with 1 pass, nothing? Not even an error! I went all out and did the Gutmann, 35 passes. Nothing and no error! The file just remains. For convenient sake I renamed the main folder to 1 and 2 and booted into the recovery consol and tried to delete it from there. Same thing! ?Can?t remove access denied? What the!!
View 9 Replies
View Related
May 4, 2009
I have a Toshiba Satellite A205-S5000 with Vista home on it and it works OK, but I bought a larger HDD and I thought that I would put Windows XP PRO on it, I went from a Hitachi 160GB 2.5" SATA drive to a 250GB drive, same Manufacturer, the only difference in the drives is the original was a SATA 1.50 and the new drive is a 3.0, BIOS see's the drive and the XP disk does al the usual stuff, then it asks if you want to Install windows on it, so I click OK and then it says the windows cannot detect any HDD and aborts the installation, I know that the 2 SATA's are compatible and the only draw back is that the 3.0 may operate in the 1.5 mode in the worse case scenario, but windows doesn't see the drive at all.
View 3 Replies
View Related
Jan 28, 2008
At times Cd drive Icon not visible in My computer. Then I have to restart the system to get it back. I m using Windows 2003 EE SP1 in newly assembled server.
WHile browsing the contents of the CD and if I choose back option it says D: or CD drive is not accessible and I have to restart the system to get it back.
-This is a fresh installation. Please let me know what could be wrong.
View 3 Replies
View Related
Sep 1, 2009
I have WXP Home, a 160gb HD. Asus Motherboard. I partitioned the C drive with Paragon 9 and moved all my data to the D drive due to some problems and had to format and reinstall windows on the C drive. when I finished and rebooted I could access everything. A short time later I could not access the D Drive, the error message said that I did not have permission. No explanation, Just locked out. I can access folders on the D drive if I search for a folder then copy them across from the search window into the C Drive, or if I boot into Safe Mode. That is no good. I need access from My Computer by clicking on the D Drive Icon. Any suggestions.
View 9 Replies
View Related
May 7, 2005
I am unable to access my cd rom drive.After inserting a data cd and clicking on the cd rom icon, a blank screen appears.I would be most grateful for any help you might be able to provide me.
View 2 Replies
View Related
May 16, 2007
Having been severely burnt by previous pc crashes I have built my last computer with two hard drives. I installed my o.s. WinXp, SP2 together with several minor programmes on C:I then used D: as a storage drive and have lots of valuable info on this drive including two websites. I have had a crash, and when I couldn't get C: up and running even trying the XP CD and using "R" repair wouldn't start, I then thought surely I will be able to format C: and re-install WIN XP, which I did.The pc is back running, but it has re-lettered the drives, C: , the CD ROM drive is now D: , and the 2nd hard drive is now E: (is this significant?) Now when I go to windows explorer or my computer when I click in the 2nd hard drive I get a message telling me this disc has not been formatted, Do I want to Format this?
View 6 Replies
View Related
Jul 29, 2009
I brought her computer home to use for my school work. Someone signed into the Administrative / Owner name and somehow locked it. We don't have one of those password reset disk that the Windows website says. I have a disk that says "Microsoft Windows XP Home Edition System Recovery CD/DVD" I was told if I reinstalled Windows on the computer that it would erase the entire harddrive. There are alot of pictures on the computer, not to mention Microsoft Office, that I don't want to lose. My mom passed away suddenly and while I know her other passwords, this one is different which leads me to believe one of my younger cousins was messing with her computer and did something they didn't mean.Is there anyway possible to reset the password and use the computer without losing all the pictures on it?
View 2 Replies
View Related
May 20, 2007
I ran a windows recovery on my HardDrive yesterday - I selected NOT to delete any of my files.Now Ive set windows all up again, and I cannot access my documents. Firstly when i right click on the my documents folder it says 'empty', but when i try to double click it it gives me a 'cant access' error.My hard disk is showing on 1.8 Gb remaining, so my documents are still there somewhere, i just dont know how to access them?
View 2 Replies
View Related
Jan 23, 2010
I am unable to access http site, but able to access https site.
View 5 Replies
View Related
Aug 6, 2010
OS is Windows XP. The computer is 6 years old & have never had problems. Recently I'm unable to access internet Explorer. The white page appears and the "connecting" message...and there it stays. Also, I'm unable to download .net versions 2.0 through 3.5, which appears to prevent me from downloading other programs. One tech tried to assist me remotely & ultimately suggested
View 2 Replies
View Related
Mar 15, 2006
My hard disc is a Samsung 250Gb disc and it is recognised in the BIOS. As soon as I attempt to install Windows XP, when formatting, it only recognises 127Gb. I installed it anyway and ran some Windows updates from the MS site, thinking this might fix the problem. It didn't. I also accessed the Disc Management window (saw this advice in one of your threads) to no avail: it says that this device is working properly, although only showing 127Gb. If this is important, my CPU is an Adlon 64 Venice 3000+.
View 9 Replies
View Related
Aug 13, 2007
I have recently re-installed XP onto a 250GB hdd but it is only seeing 127gb drive. I have service pk1 and service pk2 installed and the bios on the system is seeing the 250gb drive.
View 4 Replies
View Related
Jul 27, 2007
i just installed a fresh winxp pro, i did not set any password so the windows starts up without asking password, so i believed i have the administrative rights i have 2 local drives (c:) and (d:) i run gpedit.msc and configure the following:
1. remove run in start menu
2. remove search in start menu
3. prohibit command prompt to be use
4. Prevent access to drive access from my computer (drive c: only)
5. Hide specific drive in my computer (drive c: only)
i closed gpedit.msc now i cant re-run gpedit.msc to configure my settings again because i cannot access drive c: where gpedit resides (c:windowssystem32gpedit.msc) i dont want to re-install the whole thing or to start all over again. winxp expert
View 6 Replies
View Related
May 8, 2009
I've had a Maxtor External Hard Drive 250GB for about 2 and half months now, and its been working pretty well until now. The small light will come on only if the plug in the port on the EHD is being held in the right position, and the 2 plugs in the computer ports are fine. The light is on, but the computer is not reading it. It also makes a small beeping noise as the light goes on and off. Is it possible to fix, or at least get files off?
View 2 Replies
View Related
Dec 20, 2008
A little over a year ago I purchased a used IBM Thinkpad laptop from ebay for my wife. It came with Windows 2000 Professional installed and everything worked fine. No CDs or floppies came with the computer. A couple of months later, it was stolen by one of her business associates. It eventually was recovered, but the thief had installed Windows XP along with the OS that was already installed. In trying to remove XP and return the machine to its original state, I somehow managed to eventually not be able to use either OS. As it stands now I have no OS and cannot even access my hard drive.When I boot from a floppy then try to change to C: drive, I get the error message: Invalid media type reading drive c: Abort, Retry, Fail?
View 7 Replies
View Related
Jul 25, 2005
I had recently had to reinstall Windows XP. However, after I reinstalled, I could not access or use any of the old software or files that were still on the computer such as microsoft office. When I try to open and use the software, it takes me into the software screen (ie a blank document for word/excel) and it tells me that the software is not installed under the current user and then the program closes down. I also cannot access my documents saved under my user name. When I try to open the folder, it tells
me that I do not have access to it. It will not allow me to edit its name or delete it as well. In addition, it keeps telling me the folder is empty when I right click and look on its properties while at the same when I go up a folder and look under properties, the same folder has 9 megs in it.
View 1 Replies
View Related
Oct 24, 2008
I ran "cacls C: /P guest:n" in a command prompt. After that, I was unable to access anything. I shutdown and booted from the OEM CD. I ran a repair install. I rebooted and put the CD in to try to finish the repair installation. It was going fine for about 5 minutes. Then I got a fatal error. I looked the error code up and it said that this meant that there were not sufficient permissions to perform the necessary tasks. Now, I can't even boot into Windows so what is the best way to fix this? Maybe resetting the permissions (if so, how)? (By the way, I have already tried cacls in recovery console and copying it onto a flash drive and running it in the recovery console. Neither work. I am dual-booting with Ubuntu on another partition, so if I need to use linux for the repair, feel free to recommend that.)
View 5 Replies
View Related
Jul 6, 2005
I can't seem to be able to get into my System's BIOS, that system being Windows XP Professional. I've tried the Hold Del at startup method, but it doesn't work.Is there an alternate method with which I could use?
View 12 Replies
View Related
Aug 9, 2005
I just put together a new computer with a ASUS P5P800 motherboard, 1gb Ram, 200gb hard drive. AMI BIOS, Marvell 88E8001 GB LAN controller (built in NIC) and I am unable to access the Internet. Device manager lists the Network adapter and I tried uninstalling and reinstalling. It also hangs whenever I try to use dialup. It dials and hangs. Tested modem in Control panel and I can Query the modem fine. I suspect that it has to do with my BIOS settings, but I cannot figure it out. I am running WinXP Pro, SP1.
View 9 Replies
View Related
Aug 13, 2007
I have asked this question in several forum and no one has been able to figure this out. I can not access: www.onlinebandit.com. It is not a gambling site just a game site. All of my friends can get there plus people in the forums I've been to. If I can remember correctly these are some of the things I've tried. Its been a long journey.
1. I used to have McAfee. It has been deleted with the McAfee uninstall tool. I then d/l Kaspersky KIS7. I have done this process 4 times.
2. While both of these were deleted I tried to get to the site. Nothing. IE can't display the page.
3. I've contacted the site management they told me to use the site called the *cloak*. This site did allow me to d/l the client but when I was asked to run the application. IE7 said it had encountered a problem and had to close. No matter what I do I can't get to this site.
View 21 Replies
View Related
Jan 2, 2009
Hello, my friend at school built me a computer about two years ago. I recently got a debilitating virus on it, so I decided to reinstall the OS. I previously had XP Pro on it, but I didn't have the disk or the serial number so I installed a copy of XP home that I had laying around my house. After re-formating the hard drive and installing xp, I am now unable to access the internet.Also the graphics look very poor on my monitor. I am guessing it has something to do with my motherboard. So I went into device manager and there is a ?! next to the following things: ethernet controller, pce device, sm bos controller, unknown device and video controller.I have an ASUS P5L-vm socket 775 motherboard. I tried going on their website and looking up what to install, but I was unable to decifer which one to grab.
View 14 Replies
View Related
Sep 21, 2006
I have cleared cookies, cache, check settings reset modem, remove router nothin is helping. On a ping I get timed out.On a trace route it doesnt complete.
Any help to resolve this issue is appreciated for i have many sites i can access but some I cant.Sites I cant access are as follows www.no2allmails.com www.a-n-a-cash.com
and some others all give the same errors
View 12 Replies
View Related
Jun 26, 2005
I cannot open any files in a folder that is encrypted. I am the administrator on a Windows XP professional, SP2. I used to be able to access the files transparently until about 10 days ago. There was a Major “Windows update� consisting of 8 updates at the same time around June 18th. The problem occurred after this update.
View 6 Replies
View Related
Mar 8, 2005
microsofts website states that on your old machine if you un-install the drive before removing it, you should then be able to move it over to the new computer and everything should be dandy, now unfortunatly ive set up the new computer and the old computer isnt working for some reason and im not sure what happend along the way but thats another matter altogether.
my question is, is it possible for me to recover the information on this disk? xp is currently asking me to format the disk whenever i try to access it.
PartitionMagic and DiskManagement in XP both show the drive and its full amount of space but unfortunatly it doenst show up any partitions, it is however listed in PartitionMagic as a "dynamic disk".
View 4 Replies
View Related
Aug 25, 2008
Computer handed to me for problem fixing (here fix) - had a virus of some kind (unknown) someone else tried to resolve unsuccessfully.Windows XP SP2 (HP Pavilion Media Center Pc I've started to investigate...Windows installer problem unable to load / unload some programs.Specifically as a test I'm tryin gto remove Windows Defender from the Add/Remove programs - unsuccessful get message...The Windows installer Service could not be accessed.
View 4 Replies
View Related
