I have installed a Belkin USB 2.0 PCI card in my box (pc only had 1.1 on the board). I have an external WD hard drive that is USB 2.0. When I plug the hard drive into the USB 2.0 port I get a dialog box that says "No High speed USB hub found.... HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub." When I look at my devices, I do not see any USB device that specifies USB 2.0, only the 1.1 device that is built in and the new card whci says "OPTi 82C861 PCI to USB Open Host Controller".
I have unistalled ALL USB devices and reinstalled, and still the same. I am running XP Pro , with SP2. The device manager shows no errors and reports that all devices are working properly. I have checked with Dell and there is no new Bios for my pc (Dimension 4300). Everything I have read said XP should support this card without any additional drivers.
I'm connecting my iphone to usb and get the "this device can perform faster...." message telling me to disconnect from the current port and connect to a hi speed port I know which is hi speed port, but cant figure out how to disconnect and then reconnect it
When transferring pictures from my camera Fuji FinePix S7000 to my computer, I get a pop-up saying, pictures can be transferred faster using a high speed usb driver. Is this something availible for free on the internet or something that must be purchased? I have done a search but couldn't find anything.
Running an Intel 865BGF board with USB 2.0, and high speed is Properly enabled in the Bios. Yet, every time I connect my Flash drive a 1-Gig Sony MicroVault, I get the message that it would run faster if it was plugged in to a High Speed USB port. According to the device manager the proper controller is there and active, and as best as I can determine Intel says that the board has high speed USB ports, but still the message.
the difference between Verizon's 'high-speed DSL' andlow-speed DSL' packages?Here's the details: Go to http://getconnected.com/and choose 'High-speed Internet' on the left. You'llthen get a dialog box, where you must enter a phone-numberstreet-address and zip-code.(Use mine if you want941)355-2785828 Lakeside Woods Cir 3424(That zip-code happens to be in Sarasota Florida)
I been dealing with hp support the whole time I've owned it. The problem was/is is that the case fan runs on high speed much too frequently. When it cranks on It slows down the computer and continues to run for about a minute.Then after about 2 min. it turns on again at high speed. When this happens and your surfing the web or working in a program it slows that process down. The fan cranks on even when not in use, if left on. Anyway, hp changed the cpu fan first, did not fix the problem. Then they changed the motherboard, it did not fix it either. They are now sending me a new power supply and cord. I'll see what happens.
I own 2 of these pc's and the other one does not run like this at all. As I was troubleshooting the first one I unplugged the 2nd pc to move it to another outlet. I then went to turn on the pc and it's totally dead! I tried everything. Switched out the powercord but that was not it. There is a light on the back of the pc that comes on when the pc is plugged in. It's blinking. On the other pc it's solid, not blinking. I talked to hp and they are sending a tech to the house with a new motherboard and power supply.
Tried to download "free Highspeed usb driver", had to pay and download driver detective, computer still says I need highspeed usb port for highspeed usb 2.0 flash drive, is there a easy way to do this myself?. My system is Dell Inspiron 8200 windows xp 2002 service pak 3
I HAVE HIGH SPEED INTERNET. MY COMPUTER HAS BEEN WORKING FINE, UNTIL TONIGHT. IT IS GOING ONLINE AND OPENING WEB PAGES SUPER SLOW. I HAVE FULL VIRUS PROTECTION, SO I KNOW IT'S NOT THOSE. I HAVE DELETED ANY LARGE, UNUSED PROGRAMS.
I have installed a targus 7 port powered USB HUB on my computer. Device manager reports unknown device. I have deleted and it restalled the drived after the system rebooted. Device manager still saying unknown device. Their is not driver needed according to the manufacture. When the PC is booting it does see the IPOD mini and the Flash drive. But once the PC is fully out and login and I look a the device manager is still reporting unlnown device error (code 10).
I had some trouble last night and today with getting rid of a virus. Now that it is gone, I am having sound problems (maybe related, maybe not). This morning, when I opened iTunes I got a message that there was no audio device detected. After trying several things, I rebooted. Magically, I could play music again. However, a short while later, I again got an error message telling me that there is no audio device found, even though it shows up in Device Manager as working properly. The problem goes away for a short time after I reboot, but returns. It is Realtek AC 97. Why won't my computer keep recognizing it? (It tried going to Realtek's site to download an update. It has updates for Windows 98, 95, etc., but not for XP. Or at least I couldn't find it.)
when i plug in a usb 2.0 device into any of the slots, it works perfectly for a while, but then i hear that 'usb device unplugged' sound, followed by 'usb device plugged in' sound. after that, the transfer speeds become miserable, which is why i assume it switches to usb 1.1. i'm using win xp pro sp2 and latest ati drivers for the southbridge
My sons friend dropped his computer off to be cleaned up. GOt into some areas that appears to have taken over his system and his Internet service canceled his account and told him to clean up his system. It was home built using a MSI mb MS6702 / K8TNEO FIS2R or K8TNEO FSR not sure which.I was going to format his system and reinstall his XP but as soon as you start the system you get the No Device Found message and then a BIOS not installed message. If you try to get into BIOS using MSI's instructions (DEL key) it will not go into BIOS so you can set-up the boot sequence etc. If you let the system continue to boot the system will boot into XP with no problem.
When you click on the DVD icon in Device manager, it opens a window where you can troubleshoot the operation of the device. When I click on "troubleshoot", I get an error message indicating: "Marscore.dll not found", so I cannot troubleshoot the operation of my DVD player. I alos noticed that I get this same error message on some of my installed programs when I try to access the help files.
When I click on device manager it says Microsoft Management Console.The selected file cannot be found.Anyone know what file loads the device manager so I can see where it went?
I recently found an old Gateway desktop in my basement. It is from a few years back, but I figured I'd do a clean install of Windows XP on it and run it in an extra room.I copied the drivers over using a program called DriverMax, and it seemed to work successfully. I had the internet right away and everything else I tried worked. The only problem I am having is that there is no sound. It also says there is no audio device found. Device Manager says I have the most up to date Legacy Audio Drivers, but I am still having this problem.Is there another driver that I might need in order for my computer to recognize an audio device.
After formatting and installing W2k on a DEll 4100 PIII I'm getting the 'new device found' wizard and it says I have a PCI device not being found.. But all my devices are working (i.e. modem, sound card etc.) When I right click on properties in the device manager it says "PCI Bus 0, device 31, function 3" Anyone know how I can tell what device it's finding and can't locate a driver for?
After Service pack 2 was installed my bluetooth went mad(basicly)But i now got all the main features working with the Bluetooth.Before the installation of sp2 i had a mrouter that shared my internet connection with my phone via bluetooth.Now after that when i try to conect i get "error message 80042000"The router service could not be found on the device or bluetooth may be disabled"..Iv searched the net but no luck. Any tips at all would be great.The Bluetooth software is Widcomm.
I created a mess (but I'm learning more each day), and after a week got it going at least, but on boot got messagae "primary hard disc drive 1 not found" which required clicking F1 to continue. I ended up reinstalling XP, got everything up and running, but still have the HD message at each boot. I've passed all of the diagnostics in Set-Up, and found nothing on any of the troubleshooting sites that helped. Set-up says: Primary Drive 0 - Hard Drive; Primary Drive 1 - Unknown Device; Secondary Drives 0 adn 1 are both CD-ROM Readers. Everything works just fine, but I'd like to figure the drive problem. I had to create a partition for the reinstall - had no choice.
I recently just re-installed windows xp on my hp pavilion laptop. When I attempted to install the sound driver off of hp site I receive an error message stating."Driver Installation Failed: Could not find the Media device for this driver."I have a basic understanding of operating systems. If you can please explain in detail. I don't know what other information to list. So if more is necessary I do my best to provide.
I recently reinstalled Xp after formatting the hdd, since I was giving a friend in need this computer. Everything went smooth and I left the computer in her possession. A few weeks later I was visiting her and was using the computer when I noticed there was no sound, where there had previously been sound. Upon opening sounds properties box I found a message stating that there was no audio device installed.I opened the device mgr and there was a yellow exclamation mark under "video controller" which was under "display." After doing some research, I came to the conclusion that the chipset driver needed updated or re-installed.
I have given my 40GB ATA HDD to my friend to fetch some movies he has got in his 160GB SATA HDD. He configured my HDD as secondary master and copied all the movies to mine. Later he removed my HDD and rebooted the system to find that his HDD isn't booting up. He says that his HDD isn't being detected in the BIOS. The well known error message "No bootable device found. Insert system disk and press Enter" appears every time he tries to boot his system. What can the solution other than formatting?( Formatting isn't favourable as there is critical data in the HDD).
If i log onto my computer and just go into network connections, the computer is not able to look for wireless networks. if i hit the button to find networks, it gives me some strange error message. i have noticed though that i can fix the problem if i manually go into services and start the wireless zero configuration service myself. i configured this service to start automatically, and to keep restarting if attempts to start fail, but for whatever reason, the service does not start on its own when i boot the computer. once i start the service, i am able to connect without any problems.
The error message i get says something about finding more than one wirless device. i have a belkin usb wireless card, and before i installed the one i have now, i had another that coincidentally was the same size and also made by belkin. thinking that maybe some software was still on the computer, causing it to find both, and consequently not being able to connect to either, i uninstalled all the software for both routers and deleted all the related program files off of the computer. then i reinstalled and...got the same exact problem.
I am using a DSL connection with a maximum download speed of upto 2MBPS but i usually recieve it for about 1-1.5MBPS. I have tried using Download Accelerator softwares to increase my speed but wuth those some spam also come into my computer so i am not using it anymore. Is there any way by which i can increase my internet speed by doing some changes in Windows internally. Also while using sharing sites my speed tends to fall to about 45KBPS.
How can i Boost up my PC speed and downloading speed,Although i used some Optimizers but it also occupy my disks memory spaces and speed down the OS similarly for Booting Time.
i want to speed up my Network file transfer as fast as "whatever"is there any way that i can do using script or software or anythin Local area connections speed: 100 Mbps
it found the virus on the F hdd which u guys know its not the main one ...it was(virus) found on a folder i can't even see i have the "show hidden folders" on so why can't i see those folders ? i am more worried about that than the virus since my software found it im okay with it lol but i just reinstalled my os and i get a virus found on a folder i didn't know xcisted wtfuge ! ! and i have folder that are just named kinda like this "5e56dc46768be0474974c759ab4690" on some hdd any ideas? oh and i can't erase them why?
