the difference between Verizon's 'high-speed DSL' andlow-speed DSL' packages?Here's the details: Go to http://getconnected.com/and choose 'High-speed Internet' on the left. You'llthen get a dialog box, where you must enter a phone-numberstreet-address and zip-code.(Use mine if you want941)355-2785828 Lakeside Woods Cir
3424(That zip-code happens to be in Sarasota Florida)
I'm connecting my iphone to usb and get the "this device can perform faster...." message telling me to disconnect from the current port and connect to a hi speed port I know which is hi speed port, but cant figure out how to disconnect and then reconnect it
View 3 Replies View RelatedWhen transferring pictures from my camera Fuji FinePix S7000 to my computer, I get a pop-up saying, pictures can be transferred faster using a high speed usb driver. Is this something availible for free on the internet or something that must be purchased? I have done a search but couldn't find anything.
View 10 Replies View RelatedRunning an Intel 865BGF board with USB 2.0, and high speed is Properly enabled in the Bios. Yet, every time I connect my Flash drive a 1-Gig Sony MicroVault, I get the message that it would run faster if it was plugged in to a High Speed USB port. According to the device manager the proper controller is there and active, and as best as I can determine Intel says that the board has high speed USB ports, but still the message.
View 6 Replies View RelatedI have installed a Belkin USB 2.0 PCI card in my box (pc only had 1.1 on the board). I have an external WD hard drive that is USB 2.0. When I plug the hard drive into the USB 2.0 port I get a dialog box that says "No High speed USB hub found.... HI-SPEED USB Device Plugged into non-HI-SPEED USB Hub." When I look at my devices, I do not see any USB device that specifies USB 2.0, only the 1.1 device that is built in and the new card whci says "OPTi 82C861 PCI to USB Open Host Controller".
I have unistalled ALL USB devices and reinstalled, and still the same. I am running XP Pro , with SP2. The device manager shows no errors and reports that all devices are working properly. I have checked with Dell and there is no new Bios for my pc (Dimension 4300). Everything I have read said XP should support this card without any additional drivers.
I been dealing with hp support the whole time I've owned it. The problem was/is is that the case fan runs on high speed much too frequently. When it cranks on It slows down the computer and continues to run for about a minute.Then after about 2 min. it turns on again at high speed. When this happens and your surfing the web or working in a program it slows that process down. The fan cranks on even when not in use, if left on. Anyway, hp changed the cpu fan first, did not fix the problem. Then they changed the motherboard, it did not fix it either. They are now sending me a new power supply and cord. I'll see what happens.
I own 2 of these pc's and the other one does not run like this at all. As I was troubleshooting the first one I unplugged the 2nd pc to move it to another outlet. I then went to turn on the pc and it's totally dead! I tried everything. Switched out the powercord but that was not it. There is a light on the back of the pc that comes on when the pc is plugged in. It's blinking. On the other pc it's solid, not blinking. I talked to hp and they are sending a tech to the house with a new motherboard and power supply.
Tried to download "free Highspeed usb driver", had to pay and download driver detective, computer still says I need highspeed usb port for highspeed usb 2.0 flash drive, is there a easy way to do this myself?. My system is Dell Inspiron 8200 windows xp 2002 service pak 3
View 4 Replies View RelatedI HAVE HIGH SPEED INTERNET. MY COMPUTER HAS BEEN WORKING FINE, UNTIL TONIGHT. IT IS GOING ONLINE AND OPENING WEB PAGES SUPER SLOW. I HAVE FULL VIRUS PROTECTION, SO I KNOW IT'S NOT THOSE. I HAVE DELETED ANY LARGE, UNUSED PROGRAMS.
View 1 Replies View RelatedWhen ever I click on a page to open it seems to take forever to open on high speed internet connection?
View 7 Replies View RelatedMy problem is : When I called Verizon yesterday, I was told that to connect the printer to the router, I do not need the print server. I was asked to locate the ethernet port at the back of my printer, plug the ethernet port cable and connect it to the Verizon router. Unfortunately, my printer does not have an ethernet port. I was told to call HP,and I did but did not get much help.What should I do to get my wireless printer work? I have a PC and a laptop. Prior to Verizon, I have a DSL and Vonage, both routers and print server did not have the same problem.
View 1 Replies View RelatedHow do I find my processor speed, RAM, and hard drive speed/configuration?
View 3 Replies View RelatedI am using a DSL connection with a maximum download speed of upto 2MBPS but i usually recieve it for about 1-1.5MBPS. I have tried using Download Accelerator softwares to increase my speed but wuth those some spam also come into my computer so i am not using it anymore. Is there any way by which i can increase my internet speed by doing some changes in Windows internally. Also while using sharing sites my speed tends to fall to about 45KBPS.
View 14 Replies View RelatedHow can i Boost up my PC speed and downloading speed,Although i used some Optimizers but it also occupy my disks memory spaces and speed down the OS similarly for Booting Time.
View 9 Replies View Relatedi want to speed up my Network file transfer as fast as "whatever"is there any way that i can do using script or software or anythin Local area connections speed: 100 Mbps
View 1 Replies View RelatedI recently kept getting a blue screen everytime I tried to restart my computer. This happened with my old computer and I ended up having to get a new Hard Drive. Well I was able to fix this problem by booting in safe mode and system restoring to an earlier date. Well now my CPU Usage is always running high, over 30% almost aways, dipping all the way up to 100% sometimes. This is when I have nothing system heavy running, I have Dual 3.2Ghz EE processors and 2GB of Ram.Well I was getting a similar problem last month, it was because of the trojan vundo. I got vundo off a couple weeks ago and no more CPU Usage problems. Well I didn't go THAT far back in system restore. So I did an updated Norton Scan, and updated Adaware scan and an updated spybot scan, still gettin the problem. It's doin enough that I cant watch videos with th epicture being jerky and sometimes it freezes my IE for 15 or so seconds.
View 6 Replies View RelatedI notice sometimes that my computer usage will jump to a very high percent. Most of the time between 60-100%. I get this when Im not doing anything, if theres nothing running (That I know of). Sometimes if I have more then 1 IE or FireFox box open. It will jump to 80%. Can someone help me find out whats going on?
Rob
I'm hoping I can resolve an issue here. First let me start out by apologizing for this long post, but i'm trying to get as much info out as I can.Recently i've been having big problems with my computer running VERY slow, my computer takes 5 minutes to boot up when normally it would only take 1, my mouse moves very laggy, and I can't start up any programs without having to wait minutes just for it to start. When I look at the performance monitor, my CPU usage is anywhere from 50%-100%...and i'm not even running anything! First let me get somet things out of the way. First off I have a laptop with AMD Athalog 64 2.5 ghz processor, 1.0gig of ram, and a ATI X600 mobility video card. I've had my computer for a little over a month so it's not outdated or anything, and all of my drivers are up to date.
I did a viruscan on my computer which took very long b/c my CPU usage was very high, and nothing negative came back when I did so. I ran adaware and removed all of the adware I had.still didn't fix the problem.
After trying both of those things I decided i'd try to restore my computer to an earlier point. it was successful. That was a couple days ago when I was having this same problem. Well here we are present date, and i'm having the same problem again. I tried restoring my computer to an earlier point again, but this time it resulted with some troublesome problems, apparently an important ATI file was deleted or something (not sure exactly) and I couldn't boot my computer up in normal mode, I had to go back into safe mode and rollback the drivers for my computer to even boot up. That was approximately 30 minutes ago, and here i am now. Obviously restoring didn't help this time because my computer is very slow at the moment.
I don't get it, because both times this has happened, it comes out of no where. My computer will be running just fine, then 'BAM!' out of no where my CPU usage is out of the roof. I'll try restarting, closing everything on my toolbar nothing works. Speaking of toolbars, mine is pretty empty, it's not overloaded with a bunch of crap, mostly just important stuff like firewall and virus scan. I can't imagine that restoring my computer is the only option here. There has to be something that is causing this, that i'm not detecting. Originally I would have guaranteed it was a virus, but McAfee Virusscan isn't picking up anything. And it's obviously some software issue, because when I tried restoring my computer a few days ago when I was having this problem, everything ended up working normally after that. This time when I tried it though, there was no luck.
Ive noticed that for the most minmal ofpc tasks my cpu usage alwasy jumps to 89-100% which in turn slows down my PC? does anyone have any ideas how i can lower that?
View 6 Replies View RelatedMy CPU Usage is too high. My computer is running really slow because of it. I looked under Windows Task Manager/Processes and System is taking up about 50% of the CPU Usage. It is not a virus because I have been through a whole thread in the Security section and they said I have no infection. This does this off and on. I have been having this problem for a while and then it stopped. I just restarted my computer and it just started again.
View 2 Replies View RelatedThis question is actually going to be for a friend of mine mostly and secondly for me. We have the same issue.We both have Norton Antivirus 2007 and the latest updates We both Have Zone Alarm Pro and the latest updates We both have all the latest drivers for all our hardware and use third party driver toolkits just to be sure about it We both Recently formated and reinstalled windows and made sure we have all the latest windows updates We both scan for viruses and other types of malware religiously For some strange reason my computer will be completely idle and out of nowhere the CPU will start running high (fast).I mean, it's literally out of nowhere because there are no changes in whatever i am doing. I will leave the computer completely untouched, without being connected to the internet and the CPU will just go off on its own running at high speeds out of nowhere. I don't even have a screensaver.
View 9 Replies View Relatedthis problem just happened today.. my cpu usage seems to spike to about 50% every 5-10 seconds, and it's become unbearable to work with.i scanned with avg and it detected nothing.. i believe the problem stems from something called services.exe because when i ctrl alt del, i can see in processes that it spikes up to a high amount of cpu usage. i did some googling and haven't found much help on the issue.
View 3 Replies View RelatedI formated my pc, deleted the partitions, recreated them and installed 2 OS of XP in each partition (same way and thing as I had b4). This time my cpu approaches 100% with nearly anything, from opening a window to scrolling down. Everything I do raises the cpu. The only thin I installed are the drivers for motherboard and antivirus. I checked the pc with 3 diff programs for viruses and nothing came up. I can do nothing! Plus I got this windows poping up telling me that I got system critical errors and that my registry is corrupted (?)
View 2 Replies View RelatedFor the past couple of weeks every time I turn on my PC and 'go online' within a few minutes the pc sounds as if it is downloading updates or similar ; but it isnt. It stops if i go off line . while this is is happening , which can last 4 or 5 minutes the CPU usage ia very high so the system is painfully slow. I have scanned for spyware etc but all seems ok . how can i find out what it is 'doing'. and more to the point how can i stop it ?
View 8 Replies View RelatedHi. Don't know exactly where to go to ask this question, but I want to add a Hi Speed USB 2.0 and firewire 3.5 in. drive to my computer tower in the empty bay What kind of connection should I be looking for on the motherboard.
View 7 Replies View RelatedI have noticed in the last few days that when I go to Task Manager is shows my PF Useage to sometimes be as high as 1.06 GB. I am also getting a message that indicates my Virtual Memory is low and that Windows is increasing it? I also notice my CPU goes from 2 or 3 per cent to 60 or 70 percent.
When I reboot the PF useage will drop to a much lower number.I have done a total virus scan, scan with Spybot and Ad-Aware in addition to the AOL spyware program. I also run Spyware Blaster. I also did a system restore to a point last week.Can anyone offer any explnation about these matters or have any suggestions as to what is going on and what
Windows has been running really slowly sometimes and i've ran spybot, adaware and a couple others and its still running slow. when i went into task manager it said explorer.exe mem and cpu usage was very high; cpu was 99 and mem was over 100k
View 5 Replies View RelatedWin Xp - Service Pack 2, I suspect the problem lays with a trojan dropper. In fact I'm certain. At the moment I am getting a trojan dropper putting random files into my temp internet files every 3-4 hours - the latest file being SQL.AVG?? Norton deletes it as soon as it appears but I'm certain its causing my 90-100% CPU usage on explorer. exe. Its been doing this for about the last week.
I've got all of these installed - ZoneAlarm, Norton, AVG 7.1, Ad-Aware Se and even Microsoft Anti-Virus. I updated them all and went into safe mode and ran every single one of them on full scan and none have found the culprit. When booted back into normal mode the trojan dropper has started again and cpu usage back up to 100% for explorer.exe. Basically everthing crawls after 5 or so minutes of reboot.
My Compaq running on Windows XP Home has suddenly and mysteriously started running at high CPU's (almost 100%) at boot. From Task Manager, I could see that it was the svchost.exe that was running high. I contacted Microsoft and after 2 1/2 hours of shutting down literally every process and then slowly re-adding them, it was found that it is the wireless zero config that is running all of the CPU's. I am on a laptop (wireless through DSL - sbcglobal - and using a linksys router which is running at 11 - maximum connection)downstairs. I have NEVER had a problem until 2 days ago. I have added NOTHING to the computer.
I can sit directly next to the router (upstairs) and the CPU will drop, but not completely. When I plug into Linksys using ethernet, the CPU stops to 1% - and the computer resets itself. It will be fine the rest of the day. I have also had success unplugging Linksys for about 5 minutes (while sitting next to it) and that also seems to reset the CPU usage. HOWEVER - if I restart, either from warm or cold boot, the same cycle happens all over.Linksys gave me a patch, which has done nothing. They said if it was a Linksys problem, the patch would have fixed it.Microsoft can't help - it is a wireless issue.SBC can't help - it is a Linksys issueI haven't yet called Compaq because I am afraid they will tell me that the high CPU is due to a failing in my internal wireless. THE Presario 3240US IS 4 YEARS OLD AND HAS BEEN GREAT - NEVER ANY MAJOR PROBLEMS! Obviously, the computer is having to work too hard to connect to the wireless system, thus the high CPU's. And, when it runs high, I have problems with the internet slowing down. Anyone out there ever had this problem? Is it time for a new computer?
I'm running XP on a computer with 1.3 gig CPU, 768MB RAM and 60 gig HD. My CPU usage is typically about 25-40%, but if I want to link to a video clip online and run it, CPU usage goes to 100% and the video won't run.I had a bad browser hijacker in May which took 10 days to fix with Tech guy help and me learning along the way, and a small problem in August, again fixed through advice from TechGuy, which I really appreciated.However, I have another teen living with us now, who says that my CPU usage should only be about 5%.Could someone help me decide what I layers of protection I can do without or how to configure all the anti-everything software I have that was recommended in May? I look forward to hearing back from someone.
View 5 Replies View RelatedEvery time i use my windows media player to play mp3s it changes the computer resolution from high to low.
View 1 Replies View RelatedWithin the last week or so I've frequently encountered a very high CPU load that stays around 70, 80, 90 percent and sometimes even gets stuck at 100% at which point I usually just have to reboot. It occurs even when no programs are running except minimal background like McAfee and ZoneAlarm. P4, 2GHz, 512 DDR RAM, XP SP2.
View 9 Replies View Related
