If you want to share with permissions per user, go to folder options, next go to the tab view and disable 'use simple file sharing'. Now you can set permissions for your shares per user. This only works if you use the NTFS file system. In Windows XP Home you have to boot into safe mode to access these settings.
View 9 Replies
I have a couple Desktop PC's and a notebook PC. Both run winXP and I have all setup in a workgroup called HOME. From the notebook, I can see the main desktop PC I want to access but whenever I try and open it, expand the tree, I get an error: "xxxx is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Access is denied."
But I have set the network sharing and security permissions on the c:drive on the desktop PC in question to allow for access and files to be changed by other users on the network. If I've set the permissions, and the computer appears on the list of network computers in the my network places on the notebook PC, why I am being told that I don't have access permission? Its feels like an XP bug or something...I can access my other PC on the network from the notebook PC just fine - add more network places from that PC on the notebook etc. But I cannot do this on the second desktop PC even with full access permissions granted.
I am running WINXP Pro after having to do a clean install (Network card failed and corrupted something?) I have a bunch of files that I could not access, figured out I had to take permission of them as individual files (I could see in the folders, just not the open the files) I've had to keep doing this every time I move a hard drive to another PC. My question is how do I reset all the file sharing permissions so that anybody on any network/pc can access the files?
View 2 Replies View RelatedI want to share a folder on the network, giving just certain users the ability to read and write its files, but not other users. That's easy in Windows 2000, I right-click on the folder and choose Properties. On the Sharing tab I click the "Permissions" button and then choose the users who will be allowed to access its files. But in Windows XP the Sharing tab has no "Permissions" button.
View 3 Replies View RelatedI have 3 PCs at my home (call them A, B & C). A is running XP Pro SP2 on an NTFS disk. B & C are running XP Home SP2. All can see each other fine thru our wifi network and all can get onto the internet fine thru our DSL router (NAT). On A, simple file sharing is turned OFF. I've got a folder on A that I want B to have access to, but not C. On B there is a user called Mary. I tried reproducing Mary's user account onto A (same name, password, account type). Then I went to the folder on A and set the permissions so only Mary could access the folder. Then I went to B, logged in as Mary and tried to access the folder on A but it said "permission denied".
How do I set permissions on a folder on A using XP Pro SP2 so that a user on B can access the folder on A, but not any users on C? In the series of permission screens, I tried to locate B & C, but it was only showing me A. How do I get B & C to appear so I can select a user on B as having access rights to the folder on A? From A permissions locations, I tried typing in \Busername , but no luck.
I have a problem with sharing permission's.The actually problem I kept a folder in sharing in which there are different files.some times what happens is two different users access one file at a time without knowing and save the data from were the real problem creates. i need to give permission like if one user is accesing the file the other user shuld get read only until he uses.
View 3 Replies View RelatedI am trying to move files from my old XP computer (to be called OLD from now on) to my new Vista computer (to be called NEW) over my network. In some folders, there are some files that don't have the correct permissions for me to move them. I get this message on NEW when I try to copy them over: Destination Folder Access Denied You need permission to perform this action
The folder that these files are in on OLD has the correct permissions set, but for some reason some, not all, of the files within it have not inherited the correct permissions level. I can't figure out how to change the permissions level of these individual files. When I right-click on the problematic files in OLD, I do not see a Security tab.
For somereason i can no longer enable Common Tasks, how do i go about fixing that. Also My Default folder view for all folders is not being set globally, it has to be set for each single folder After countless efforts of going through the process
1)view>list and arrange by name
2)tools>folder options>view tab>apply to all folders doesn't seem to work. Attached is a screenshot of the classic view error
Ever since I did a factory reinstall 3 months ago, every time I close my machine down and restart, my Windows Explorer settings keep getting reverted back to ICON view instead of my saved DETAIL view.I'm using the button under tools and folder options, View Tab, and Apply to all Folders.Is there something else I'm missing?
View 1 Replies View RelatedWhen I click on the Windows Explorer icon, it opens up with the left side being the blue bar with File and Folder Tasks, Other Places and Details showing. I have to manually click on the Folders button at the top to get the view I want. Is there a way to make this Folders view be the default view when I open Windows Explorer?
View 5 Replies View RelatedWhenever I save a picture from IE 6.0, the "Save Piccture" window always opens in a thumbnail view of "My Pictures". Is there any way I can make it open in the list view instead?
View 3 Replies View RelatedI run all of my anti-spyware/malware programs, disc defrag, chkdsk every week. I then create a restore point.Today, for the first time ever, I needed to restore my computer to a previous date because my XP view changed to Classic view and the option to change it back to XP view wasn't available. But the restore points that I saved were not available. I was given a choice of July 1,2,3,4 and 5. The last time I created a restore point was last Monday, June 27th,but when I clicked on the << arrow to go back to the month of June, it wouldn't go back.What happened to the restore points that I created and why couldn't I access them?I know that they were saved because I received a message that they were created.And I have no idea why my XP view changed to Classic View when I turned my computer on yesterday.
View 31 Replies View RelatedA folder full of PSD files. I have the folder on thumbnail view so I can easily find a look I wan't and choose it instead of opening up each one. The problem is that the folder is not generating a preview of the file anymore but instead shows the PSD icon. I just got a new computer and it is since then that this has stared, as on my old computer the previews showed up fine. Is this a setting I need to change somewhere?
View 9 Replies View RelatedI am just about to enrol on an mcse course so I am playing about creating user accounts and policies on my own computer, however while logged in as myself (administrator) I added XP/All Users to the security tab of C: and placed deny access to the drive. As now I am locked out of my own drive. I assumed as I am in an adminsitrative account this would not apply to me and now when i try access security tab from c:'s properties it wont allow me
View 1 Replies View RelatedOk i got these stand alone pc's and i wont to lock them down to where you cant download toolbars instant message clients, take off the games under the accessories tab no access to the control panel no run icon. just to where it will be only work can be done on it. can you point me in the right directions. the machines im running are dell opitplex with windows xp home edition
View 7 Replies View RelatedWe have a user that went to grant someone access to a folder on the network. They did this from there desktop, not the server, and now no one can access the folder. Not even an administrator login. I'm assuming they got the warning about changing permissions remotley, but he swears he didn't see anything like that. Now we have a couple of users that have icons that don't work because they're coming from that folder.Any way to change those permissions back? I know the permissions default to something.
View 12 Replies View RelatedThe other day, I moved some files+folders outside of a folder just to organize things. I tried to put them back inside and I kept getting the "Cannot move file, it's being used.." error. I was pretty sure I wasn't using any of the files so I checked the permissions to find that under the security tab, inside the "Group or user name" was completely empty without any user names. I fixed it by adding my user name. This has happened before. A few months ago, I couldn't access any folders and files in this one particular folder without getting the "Acess denied" message. I found out that all my files and folders within that folder had no user names under the security tab which was a pain because I have over 100s of files in there and the only sure way to change the permission is to do them almost one by one.
I was wondering if there were any particular reason why it's doing this. I'm pretty sure that this computer is virus free and I almost never turn off the "Use simple file sharing" under the folder tool section. I've only played around with the permissions once over 5 months ago and I haven't touched it since. Also, is there a way to change every permission within one folder so that I won't have to do them manually one by one?
I have Fedora Core 6 and use KDE.Is there a way to see permissions by using the command line, so you can see the results of a "chmod" command? I know you can see permissions by right clicking the file in Konqueror.
View 4 Replies View RelatedThere are 4 accounts on the computer, all administrators. Of the 4, only one account has access to everything. The other 3 accounts all have Access Denied pop-ups when trying to open any file on the C: drive.
I tried rebooting in safe mode and logging in as administrator to see what the security settings where. After looking there I found out that all 4 accounts have full rights to all folders, sub folders, and files on the C: drive.
I recently had a Windows XP HE crash that caused me to reinstall the application. Not thinking, I created a new domain name and user name for myself during the setup.
When I tried restoring my Microsoft Outlook 2003 files to my machine from a Novastor 7 backup, the files
restored, but I only get "Access Denied" messages when I try to access them in any way. I'm assuming, because of the the old permissions.How I can regain access to them?
How to access *Advance file Permissions* on NTFS file systems for XP Home simply by booting into *Safe Mode*, rt-clicking any file or folder, and navigating to the *Security tab*. This gives the user the ability to allow or deny read, write, execute, read & write, display contents, full-control, iheritance, and take ownership permissions, with many more options available to apply to different users and groups stored on the computer.Well, you don't have to do this in *Safe Mode* (XP Home).
Go to your command prompt - Start>All Programs>Accessories>Command Prompt. Now type "cacls" in the window (without the quotes). This gives you the ability to add, remove or modify file permissions on files and folders through the command prompt. Type "cacls /?" for help on different options and variables. You do not need to be in safe mode to use this so it makes it a little quicker than using the safe mode security tab GUI.Remember - this only applies to NTFS.WHY the system crashed ?(ie. faulty hardware/software/conflicts, etc)
For getting XP Pro security settings on XP Home.Easier way to set sharing permissions on folders. You can use the GUI instaed of the more complicated command line without having to go into safe mode.1. Click on the start button2. Then run3. Type shrpubw4. Chose the folder whose permissions you want to change and give the share a name5. Click next, now you can chose custom if you want to have full options.Quick Tip: In order to set file permission in windows XP Home, the file system must already be converted to NTFS.
View 9 Replies View RelatedI can access the BASEMENT printers and files from the LAPTOP. I can access the LAPTOP files from the BASEMENT. The OFFICE PC shows up in the workgroup computers list on both the LAPTOP and BASEMENT PC, but I receive the "YOU MAY NOT HAVE PERMISSION TO USE THIS NETWORK RESOURCE" message when I click on it. And I cannot access the LAPTOP or BASEMENT files from the OFFICE.
View 4 Replies View RelatedGot an XP machine that's using the guest account with restricted permissions. I can't log in in safemode as it restarts all the time before the loggon screen. I can't set it to not automatically restart because the guest account doesn't have permission. Putting the HDD in another machine we can see the Admin and another account, but they don't show up on the logon screen in normal mode. I know there is a way to logon the administrator account from the normal mode logon screen as i've done it before.
View 1 Replies View RelatedI have a file server that is not set to active directory, so I am trying to simplify the sharing of drive space. I am testing that I can or cannot get into certain groups. When I access from another Windows client and I get into my own file and then go out to try and get into another persons folder, I am auto directed to mine. I have to logg off each time to check each persons user folders and log in as them.
I was trying to restric the access of the power users to certain folders and I deleted the groups and users by mistake that could have access. I add the administrator group to get access to the drive and folders, but windows doesn't propagate the permissions to the subfolders and files. Windows let me do it folder by folder, and file by file, but it will take forever taking into consideration that that partition of the drive has 40GB of informations and houndreds of folders and subfolders. Does some body know the way to propagate the permissions to all the subfolders and files?
View 1 Replies View RelatedI was attempting to set permissions on my two NTFS formatted external harddrives and essentially deny users and guests the right to create/delete any files on the drive but I guess it somehow managed to restrict that right for EVERYONE. Not even in safe mode as the Adminstrator can I even look at the permissions and apparently it will not even allow me to open any files either. I cannot copy files to another drive and I cannot open or run any executables. Is there any way at all for me to reset the permissions for this particular drive or perhaps alter them to work the way that they rest of them work for me. I can't for the life of me understand how the Administrator cannot access the files on a folder and I don't exactly know what higher privileged user type exists. I really don't want to have to reformat the drive because it's got about 350 gigs of videos/music/programs.
View 7 Replies View RelatedI am trying to remotely access drives from my one computer to my laptop in order to transfer files with more ease than running back and forth, burning, copying, etc. The method I am using is simple enough. The drives are set for administrative share [c$, d$, etc]. And I am accessing through the run command via \REMOTE_IPc$. I am definately pinging the computer correctly because a dialog box opens, however this is where the problem begins. The dialog box does not let me switch to an administrative account. It only shows "Guest" in the login name.
I dont have the guest account even activated on my main Desktop CPU and I wont have much access without administative rights. I was just wondering what could be making it so that I cant login under my main administative name. My desktop is using WinXP pro. Laptop is using XP home. Not sure if this fact matters but the desktop is using internet connection sharing that is feeding a router, which in turn is giving wireless internet to my home network wherein my laptop is connected. Also, I can access remote desktop easily enough but even with disk drives shared they do not show up on the remote computers "My Computer" folder.
I'm working through an ASP.NET tutorial in which the datasource is to be an Access .mdb (the famous Northwind db, to be precise). I'm instructed to configure the permissions the folder in which the northwind.mdb file is supposed to reside. The tutorial instructs me to browse to that folder, and right-click it and select "properties" and select the "security" tab-- but i don't have a Security tab. My user account is an administrator account, but just to test it, i logged is a "Administrator", but there was no change. Why do my folder properties not show a Security tab, and how do i change it so they do?
View 6 Replies View RelatedI accidentally set all permissions for one folder on my hard drive to deny. Now I completely lost all access to this folder even if I log in as administrator. I cannot change permissions either. When I click "Security" tab in "Folder Properties" window, an error message shows "You do not have permissions to view the current permission settings for <folder>, but you can make permission changes." However, when I tried to give "Full Control" to Administrator, another error message shows "Unable to save permission changes on <folder>. Access is denied"
View 4 Replies View RelatedI was reallocating them earlier... and something went terribly terribly wrong. (gremlins I say) I try to log into my user account, but it says it does not have access to any of the files (like the desktop, c:/docs and settings/username/desktop)So is there a way to fix this, preferrably an app that will be able to rewrite the file permissions tables on a large scale?
View 8 Replies View Related
