Services / Controller App / Add New Hardware Doesn't Work

Sep 20, 2005

I'll try to keep this short but I've really never had a problem that I couldn't get around before, and though I've searched all over the net I can't seem to find anyone with these exact problems. Recently installed a new hard drive and dvd burner to my system with Windows XP SP1. Previously had no problems as far as spyware, viruses, etc... Well, these two installed fine and were working fine. A day or two after installing them though, windows told me it would need to reactivate itself due to the configuration change. Did that, went fine, but afterwards I was able to update to service pack 2 and a few other things that never would install properly previously. Very soon after SP2 and the other updates go in, things start acting abnormally and the situation deteriorated quickly.

Eventually I've ended up with two things happening. The first is an error about Services and Controller app. Now I've seen other users with this problem, but some files are a little different, and/or there was no solution.

SzAppName: Services.exe SzAppVer: 5.1.2600.0 SzModName: ntdll.dll
SzModVer: 5.1.2600.1217 offset: 00033905
Error Report Contents
C:.......services.exe.mdmp
C:.......appcompat.txt...

View 6 Replies


ADVERTISEMENT

Doesn't Reboot - Safemode Doesn't Work

Jan 15, 2008

Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem.
The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.

View 2 Replies View Related

Cannot Use Any Services / Have No Task Bar / Key Does Not Work

Oct 7, 2007

I cannot use any windows services.I have no task bar, my windows key does not work, I cant add/remove programs, when I try and make a new profile in case this one is messed up I get just a blank box when I click on the user profiles in control panel.In the task manager where it shows user name they are all blank and it shows under users no one is logged on.I cannot transfer files either tried putting stuff I need on a removable drive but they wont copy or drag/drop.

View 9 Replies View Related

Vista / Dual Boot - SM Bus Controller Driver Wont Work?

Jan 20, 2009

I have just set up a dual boot with XP Home on my Vista system, but in the device manager under XP i am missing drivers for "SM Bus Controller".

View 3 Replies View Related

Generic Host Process For Win32 Services Error: Sound & Video Card Wont Work?

Jan 26, 2006

ive a question about a "Generic host process encountered a problem and finally ive decided to format my hd. reinstalled win xp family, and i noticed that neither my sound nor my video card was working and that i couldn t use usb devices that usually work without drivers. i plugged my internet connection (cable) and then ie always crashed. so i did not manage to download windows updates this way. i decided to active auto-updates, and, a few seconds later, ive seen the message: "Generic host process for win32 services encountered a problem".

View 14 Replies View Related

Screenshot Doesn't Work

Sep 3, 2010

i have a laptop and i know the keys to take a screenshot but it doesn't work .there is: fn+insert,prnt scrn sysRq but it does't work.

View 4 Replies View Related

Try Run Windows Normally Doesn't Work

Jul 27, 2007

This isn't my machine it belongs to my grandpa. It has XP SP2 on it. It loads just past cmos screen then reboots itself. no message or nothing. Try run windows normally doesn't work. Try run safe mode with network support NOPE.

View 12 Replies View Related

Reformatting Without F2 - Key Doesn’t Work

Feb 12, 2006

my friend tried to reformat my computer but for some reason my f2 key doesnt work out of all the keys on my laptop. i still get blue screens every once in awhile all related to windows. is there any other way to reformat besides going through the f2 during reboot?

View 7 Replies View Related

Msconfig Doesn't Work

Aug 4, 2005

why is it in win 2k msconfig doesn't work when typed into the command line?

View 7 Replies View Related

Definitive SEARCH In Doesn't Work

Aug 26, 2005

Going to START/Search button then adding parameters to close up search such as choosing "Case Sensitive" DOES NOT WORK. When I pressed Go for the search, all kinds of files popped up in the search such as Realization.doc, Capitalization.xls, anything that had the letters liz in it when I had typed in the "File and Folder" box Liz (Capital L lowercase iz) and then a space after the z. I have files named Liz(space).this and Liz(space). that, and that's what I was searching for. But files still appeared that had lowercase liz in the middle of a word like Capitalization. So what's the point of having a Case Sensitive box to check, when it doesn't work! Am I doing something wrong here?

View 1 Replies View Related

Ctrl Alt Delete Doesn't Work

Feb 10, 2010

Ctrl now opens the bookmarks side-bar in firefox when I try to ctrl + c to copy something it does in fact copy but it opens the bookmarks sidebar every time. Also I cannot ctrl alt delete to open taskmanager anymore.

View 3 Replies View Related

Bunch Of Stuff Doesn't Work

May 19, 2009

Alright, my in laws are having a problem with their computer and they said that last weekend Windows XP (SP3) asked to reactivate so they did without a hitch. I've never had a computer ask to do that unless I changed some hardware (which they did not) but maybe it's just never happened to me! So last week (a couple of days after the reactivation) they said weird things started happening. For instance if you go to the start menu to active windows, it comes up with a blank screen, the Windows search function comes up with a green screen and the little dog but that's it, IE doesn't load unless you type in an address and I couldn't get any web page to load that uses Active X. I ran the Kaspersky online test with no problems found and I couldn't run the antivirus from Eset because it requires Active X. Windows media player also doesn't load, it just brings up a blank screen. My father in law was able to defrag the computer though. I didn't have much time to really play with it so I'm not 100% sure what else isn't working but I know Firefox, Utorrent and VLC work fine. Has anyone had a similar problem or know where I should start to fix this?

View 3 Replies View Related

CTRL+ALT+DELETE Doesn't Work?

Aug 28, 2005

I just installed WinXP Pro on an Asus k8v deluxe mobo And ctrl alt delete doesnt work. Any ideas? Im sure there is a simple solution i am overlooking.

View 14 Replies View Related

Run Regedit Doesn't Work Anymore At X64

Oct 25, 2008

some hours ago, I tried to run regedit as usual by using "Start | Run", but it said:regedit.exe - Unable To Locate ComponentThis application has failed to start because clb.dll was not found. Re-installing the application may fix the problem.
I checked my running processes as well as restarted the PC. clb.dll was located at SysWOW64 (being a 32-bit dll, obviously) but not at System32 (where only 64-bit-files are stored), copying it to System32 didn't change anything.After a while of searching the inet in vain I realized I hadn't tried to start regedit.exe or regedt32.exe in SysWOW64 (but regedt32.exe in System32, which gives the error), and surprisingly, it worked. Still the problem remains: I can't start it using "Run" anymore (which worked since 18.05.2005), and I didn't change anything big but uninstalled WindowBlinds (a windows skinning software which worked quite well for many months). Could WindowBlinds be the reason, and if so, how? Moreover, will I experience further problems?(msconfig still works normally and can be started by "Run"; often, this isn't possible when encountering the regedit clb.dll error).

View 6 Replies View Related

Keyboard Doesn't Work After Booting

Jul 13, 2010

A friend of mine has been given a computer without a keyboard. It works fine except WinXP doesn't find a keyboard when a normal PS/2 keyboard is connected. The keyboard is working fine when running DOS or BIOS setup. I tried reinstalling WinXP but the keyboard doesn't work after booting the XP cdrom.Now the computer says "Restarting XP installation" after booting from the hdd. But it doesn't complete the installation without an usable keyboard.

View 21 Replies View Related

Entering Explorer In Run Box Doesn't Work

May 22, 2006

I have the option to 'open explorer window' in winzip checked so it opens an explorer window of the destination I unzip files to. Recently I noticed that stopped working. Then explorer crashed causing my start menu to disapear so I used ctrl-alt-dlt to open task manager and entered 'explorer' in the run box and clicked ok. Nothing happened. explorer did not reopen.I then figured out if I entered 'c:windowsexplorer.exe' in the run box explorer would then open.I'm guessing both these problems are related as it seems winzip is unable to to open explorer.Does anyone know how to fix this? I just recently scanned for virus' with 2 seperate scanners & and scanned for spyware with 2 separate programs and im clean & i only surf with firefox. So its not virus or spyware.

View 6 Replies View Related

Started To Updated USB - Now USB Doesn't Work

Aug 2, 2005

my system only has USB & a new USB2 device I recently bought automatically
started to update the USB 2.0 system, now none of my input devices work in
Windows XP.I've now read article 813139 & it says:"Note If you are using a USB keyboard and a mouse input device, Microsoft does not recommend that you update the USB 2.0 host controller driver by means of Device Manager. If you do this, the keyboard and mouse do not function, and you cannot control the system or safely restart the computer."

View 11 Replies View Related

Second Hard Drive Doesn't Work

Oct 28, 2007

So, I have the same problem few seems to have here, my 2nd HDD doesn't show up. The problem came when I formated my main HDD and installed XP on it. After that I can't get the 2nd HDD working.First of all, it shows on BIOS, its connected with cables (tried several, thought if the cables were broken), shows on control panel, on system. But I can't see any drives, not a single one. It has worked correctly for over 5 years, which 4 of them has been with the main HDD and XP, the same thing I have now.The 2nd HDD is Samsung SV4002H, I have few pics to clear the problem.

View 8 Replies View Related

Boot Editor Doesn't Work

Oct 6, 2007

i have recently downloaded boot editor and as it did not work the first time i uninstalled it, this was yesterday. Today i turned my pc on and the system speaker beeped and it didnt even show the first loadup screen that says energy at the top.

View 2 Replies View Related

Spell Check Doesn't Work

Mar 3, 2006

i just posted this and spell check thought teyh was ok, didn't offer up they. 2:15 isn't bad. you removed 2 checkmarks, how many still remain? what are teyh? i don't see any anti virus system in hjt. you need protection.

View 14 Replies View Related

MS Automatic Update To SP2 Doesn't Work

Apr 3, 2005

My OpticPro 9636T scanner parallel port scanner initially would not work under Windows XP Pro. Plustek does not support XP on this model. I finally found a driver from Germany. When installed with right mouse clicks, it installed in English, and worked perfectly. Since the MS automatic update to SP2, it no longer works, and the driver from Germany won't install.Does anyone know of a driver that will work?

View 10 Replies View Related

Network Connection Doesn't Work

Nov 9, 2008

My laptop works fine for wireless connection, but doesn't work for wired LAN's. There is no QoS Packet Scheduler in the Network Properties and if I click on Install it doesn't come up as an option. How do I find QoS or download it in order to install it?

View 7 Replies View Related

IE / Firefox Doesn't Work Correctly

Oct 8, 2009

I have a very specific issue here with user wallpapers. I have about 20 remote offices or so that are set up with a company wallpaper and we are using BGInfo so they can easily tell us the info we need to support them. Many computers are on sales floors and we need to keep them from changing the wallpaper for obvious reasons. I have tried the solutions of using a Group Policy, changing the registry keys, denying permission to registry keys, etc . . .

All of these solutions either have the problem that the user can still right click an image and set it as the background (IE, Firefox, Paint, Image Viewer), or it does not let BGInfo work correctly. I have spent a couple days searching forums everywhere and cannot find a a solution yet.

View 9 Replies View Related

MSN (Live Messenger Plus) Doesn't Work

Mar 5, 2007

i have MSN (Windows Live Messenger Plus) and sometimes it doesn't work. i type in my username and password then it logs in. but it doesn't do anything. and then i have to close it with the task manager otherwise i can't do anything on my computer at all. can anyone help me with this? 2: my rightclick doesn't work. i don't think it's the mouse cause i'm very good in reparing mouses. sometimes my computer restarts when i'm in the middle of something, without me actually clicking restart.

View 14 Replies View Related

Auto Complete Doesn't Work

Apr 17, 2006

Just installed XP and "Auto Complete" doesn't work as long as I'm logged-in as Administrator. As soon as I switch to "Guest" user, it's works fine. I've heard of this issue before and I've seen it appear on a number of search engines- just no appropriate fixes for it.

View 6 Replies View Related

Drag And Drop Doesn't Not Work

Oct 7, 2007

while using windows, i found that i am not able to drag and drop files. i can move them around, but when i place a file into another folder or location on my desktop or through explorer, the file doesn't move. it just bounces back to where it originated from.

View 12 Replies View Related

Reinstalled Doesn't Work: InstallShield Self-Extracting EXE?

Sep 9, 2006

i've redownloaded NCARB Software (free program developed by ETS for testing candidates to receive architectural license).I reinstalled and it doesn't work. something about it being corrupt. originally, i had a message about the AUTOEXEC.NT file in the C:/ Windows/System32 folder. And it changed my error. Now I get a message from InstallShield. It says: "InstallShield Self-Extracting Exe This file is not the correct size, or is corrupt, and is unsable. OK"

View 5 Replies View Related

Opening Folder Of A Program It Doesn't Work

Jan 20, 2007

When I try to open a folder of a program it doesn't work. I click the folder and the mouse changes to the mouse and hourglass picture but nothing happens after that. Sometimes I get that error sound but no message pops up. Then the title on the title bar of my applications goes blank and I no longer can click the menu that says file, edit, view,It highlights it but it won't let me click it. I also cannot right click anymore and when I try to reset my computer, it highlights it but I can't click that either.I also can't open the task manager when it happens nor can I type in my address bar or open a new tab for my browser.. I tried running a virus scan but it catch anything so I have no idea what I can do. I've tried system restore but that didn't fix it.

View 4 Replies View Related

PC Damage With Water - Monitor Doesn't Work

Dec 27, 2005

My daughter 'flooded' the basement yesterday. We quickly unplugged her computer and found a slight amount of water on the bottom of her tower. Now, her computer seems to start up ok but there is no picture on the monitor. None of the wires got wet, but there is a small opening on the bottom where the case closes. Is it possible that so little water damaged her computer? It's only the monitor that doesn't work. We hooked up an old one as well, no luck.

View 8 Replies View Related

Updates Will Not Install - Link Still Doesn't Work

Jun 28, 2005

my windows updates will not install. I have tried the all the solutions on this link but it still does not work

View 3 Replies View Related

Display Tabs - Click Doesn't Work

Nov 25, 2005

When I open up Display properties on my computer, I have a few problems. On the appearances tab, when I click on effects, it doesn't work. Additionally, I have two themes tab. I recently installed desktop architect on my computer, but then uninstalled it, but the second themes tab still remains. I suspect that that tab is from desktop architect, because it uses its same icon. I am not so worried about the second themes tab since it doesn't bother me, but I really wanted to use my effects tab for a theme I am creating.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved