I received a reply from Sandisk (after 2 weeks of try this and that) with a solution - at least for me.Reboot and insert the Cruzer. I had success with my 256 MiniCruzer. Make sure that you have permissions to delete the keys.
View 9 RepliesI have several Sandisk Microcruzers, 1, 2, 4 and 8 GB. Job #1 once they are out of the package is to uninstall the U3 software to make them "just a regular flash drive", which is exactly what I wanted when I made the purchase.Anyway, the first 4 I bought operate just fine. The most recent ones work, but the problem is this - when I first plug them into the USB port, I get a new explorer window showing the contents of the drive.I have done nothing different with any of the drives as far as uninstalling the U3 software, and have not selected, or unselected any checkboxes or other options. I have looked everyplace I know, and cannot find where to turn this off.
View 6 Replies View RelatedI have a Sabrent SBT-EKU25 external enclosure with a 2.5 inch hard disk in it. This is a USB 2.0 drive and whenever I connect it to USB 2.0 port, it is not recognized (or "recognized" as an unknown device" ) on all my machines. It however is recognized as a drive and works fine on one laptop which has only USB 1.1 ports.I have tried separately powered USB hubs as well without success. So I don't think it's a power issue.I have even tried deleting all USB devices in Device Manager and let the machine rediscover them.
View 2 Replies View RelatedI have Windows XP Home installed and my dvd/cd burner is a Device Description SONY DVD RW DRU-530A. I have burned many files,photos,and music on this unit using cd-r discs. I am now using DVD-r discs and the burner will not recognize the disc. I tried DVD+r discs and have the same problem. Attached is the statement I get when I try to burn a disc. Should I go back to a CD-R disc or what could the problem be? I have tried to burn using Windows and using Nero with the same result.
View 4 Replies View RelatedI have been using this pc with windows xp for about a month now and up to now I have had no problems, but for some reason my drive has suddenly stopped reading dvds...My drive is an Optiarc DVD-RW AD-5170AI can insert a cd and it recognizes and reads the disk perfectly, but when I insert a dvd windows appears to start to read the disk, but after a few seconds nothing seems to be happening except that the read light on the drive is lit and the drive makes a few strange sounds. I have left it to load for a few minutes but still nothing happens.After searching, I have found 2 possible solutions:The first was to uninstall the driver and restart. Upon restart windows will reinstall the device.I tried that twice, still experiencing the same problem.
View 5 Replies View RelatedWhen I first got the computer, when I plugged in a digital camera, I got a "found new hardware" pop-up, thereafter when plugging in the USB cable, the XP camera wizard popped up and the pictures were downloaded without a fuss. At some point it stopped working, and I've ended up using Picassa to get the images d'ld, but it won't let me add photos to an existing folder. I want the Windows wizard to work again, that was better.My new camera is not recognized at all, and if anything pops up, it's Explorer. I tried to install drivers from the disc that came with the camera, but keep getting a message that says I don't need to. I've tried to manually add the camera with the "add hardware" function, but it won't work.
View 13 Replies View RelatedA Toshiba Satellite 2805-S503 that originally came with Windows ME. My friend at work upgraded my OS to Windows XP but now my CD-ROM drive doesn't recognize CDs. It recognizes DVDs and some games, but it won't read any CDs.
View 6 Replies View RelatedCd/dvd appears to be working but when a cd is installed a message is received to install a cd so it is not possible to install any software from a cd as it does not appear to recognize that a cd is already installed
View 8 Replies View RelatedWhen I try to go to the ipconfig command line in xp, I get this message: is not recognized as an internal or external command, operable program or batch file. I was trying to clean my DNS cache.
View 6 Replies View RelatedWhat would cause a relatively new HP Media Center computer to recognize other things inserted into any of the USB ports in the front (for example, a jump drive), but NOT recognize one device (a Lowrance iWAY 500c GPS car navigation device) that is readily recognized when it's plugged into a different computer?The HP computer is a friend's. The "different computer" is mine, a custom machine from Puget Systems with a P4 on an Asus MoBo. On the friend's computer, we get a "bubble" message from the taskbar to the effect that the device is not recognized -- so it knows something is plugged in, but apparently doesn't have the driver for it.
Her system is running Win XP and I assume (but don't know for sure) that she's kept up with Windows updates.
When I check MyComputer, the Lowrance isn't on the list. In Device Manager, it's listed as "Unknown device".I'm wondering about things like the HP lists a pot full of drives because it has all the camera card slots, etc. in the front panel (I think the drives go all the way up to J:, almost all of which are "removable drives".
I recently changed processors - nothing too technical -except now 5 times out of 6 , my PC will not recognize my DVD drive.There was no problem before.
View 7 Replies View Relatedon another thread, i'm looking for an answer to a problem with my daughter's computer and her dsl connection i was asked to run ipconfig/all on both my computer, that works well with dsl modem, and her's, which doesn't. the command prompt brings this error message "'IPCONFIG' is not recognized as an internal or external command, operable program or batch file."
View 10 Replies View Relatedi have belking N+ adapter comes with a stand which plugs in to my usb drives. Recently i have been getting Device is not recognized ive read through many forums on the "Fix" i unplugged my computer i un-installed my drives and the problem still continues only if i have the original belking stand. when i remove the stand and connect the adapter straight to my computer everything is fine. I did some tests with other usb extension cables i get the same problem but after removing and plugin in the cable a few times it works. Ive had moments when i have the belking stand connected i will get a connection signal but a few seconds later it will send a message USB device not recognized.
View 7 Replies View RelatedI have an HP Compaq 6515b and after I deleted Nero (could have been before that) I noticed that it only recognizes my drive as a CD Drive and no longer my DVD drive. It won't let me burn DVDs so do I need to search out DVD software? I have gone to HP and the only thing that they say about a DVD (drivers wise) is for a WinDVD program. What do I need to install to get my DVD burner back?
View 13 Replies View RelatedWhenever I try to use a usb device in xp pro it always shows up as unknown device or the usb device not recognized pop up comes up. It happens with everything, memory stick reader to a gaming controller. My specs Aopen AK79D-400 MAX mobo ,512mb ddr, 160gb western digital, xp pro .
View 8 Replies View RelatedI recently re-installed a fresh copy of Windows XP Pro because of a patched user32 virus that caused me problems it seems to be gone now since the re-install. But now since I re-installed Windows XP, my dvd and cd drives don't show up in Windows. In BIOS they are recognized as ch.0 master and ch.0 slave drives. But in Windows they're not there in My Computer or Device Manager. I pop in a disc and it spins around but nothing happens.
View 13 Replies View RelatedI have upgraded from windows 98 se to windows xp pro sp2 and when I did I no longer have cd and dvd listed in the device manager. I reformatted and put 98 back on and they are there and work fine. How do I get xp ro recognize my drives. I have a Dell Dimension XPS T800r with an NEC DV-5700A dvd and a SONY CD-RW CRS140E. I get a message when I log on to windows that windows could not load the installer for diskdrive and to contact my hardware manufacrer. Dell of course doesn't seem to have a clue about what is happening so any suggestions on how to get the drives back
View 11 Replies View RelatedRecently, I have not been allowed to download some software because I am 'not the computer administrator' but I'm registered as one. When I first installed WinXP, I put myself as the administrator. What do I have to do so that I will be recognized as the administrator and then I can download these programs
View 12 Replies View Relatedmy wife has a fairly new iMac and I was trying to set up an older external hard drive for her, which the mac wouldn't recognize. Well, I went to my trusty xp PC and downloaded some drivers that I was doing to expand onto a usb drive. Some how, gasp, d@%#mn, they must have loaded onto my system and now when it starts, it does so in DOS.
View 5 Replies View RelatedI did forget to mention that I had tried this external on 2 different pcs-- the other with xp home with sp2.
View 5 Replies View RelatedI've just bought a Lacie Porsche external harddisk 120GB if i connect it to a Windows XP Pro. SP2 / Desktop Small factor D500 1.7 Ghz PC the controller recognizes that a device has been connected but i cannot find it of my computer neither on the Disk management window.
View 1 Replies View RelatedI own a Dell Dimension 8400 system. I recently tried to download the Intel Chipset Software Installation Utility for the chipset from the Dell support website. As the installation of the software was completing, the computer froze and I turned it off. Now, when I reboot, the mouse and the keyboard aren't recognized after Windows XP loads. The mouse and keyboard do work before Windows XP loads.
View 1 Replies View RelatedCan anybody think of a reason that my video camera would not be recognized by my machine? It's a standard USB connection to a brand new Sony digital video camera. My machine doesn't even pick up that the camera has been plugged in (i.e. not even a pop up that says "New hardware detected" ).
View 1 Replies View RelatedWhat happens with the MBR on a disk which was used before as system disk and has not been formatted, but only files deleted. Is it still recognized as a system disk?
View 2 Replies View RelatedHad to reformat a drive and reinstall XP Pro on it, but upon reinstallation of XP it refuses to recognize the network adapter. It's been determined that the network adapter is a 3C920B-EMB Integrated Fast Ethernet Controller.Upon downloading drivers for this and attempts to install them, an error of "The device cannot start" occurs.On a separate install of XP on a seperate drive, the network adapter functions greatly. Is there a way to take the registry keys from the one install of XP and somehow...copy them over to the other install of XP? Or, is there a way to get the thing functioning without having to do that?
View 8 Replies View RelatedI have a Compaq Presario with a Celeron CPU 2.53 GHz and 504 MB of Ram. I use Windows XP Home Edition Version 2002 Service Pack 3. I know its a old machine but does what I need it to do. My computer has done this for a long time but I'm getting sick of having to restart the system to access CD drive. When system initially boots up the CD drive will open and close just fine but sometime later (not sure exactly how much later, (hours of 1-2 days) the door won't open by pushing button or sticking pin in small hole. If I go to My computer it doesn't even show the CD drive. What could be causing this?
View 7 Replies View Relatedi formated my computer and i have a c-media cmi9880 onboard and when installing the driver it says that the device doesn't exist or maybe removed manually and it tells me to plugin the device and reboot.but its on the god dam motherboard!i tried downloading a difrent driver and disconnecting all jacks and reseting and still it won't regonise alltougth i can clearly hear the computer beep sound coming out of the speakers.
View 13 Replies View Related6 months ago a message popped up saying "USB Device Not Recognized". I have 8 usb ports. The only one that i'm using is for the printer. It works fine. This message seemed to pop up after using my Sansa MP3 player. It to works fine. Everything that I have read about this problem is when people have it the device does not work.In my situation everything(digital camera,printer,Ipod)all work with no problem. This message went away for almost 2 months but now it's back again. Anyone help me out here? I'm running Windows XP home edition and the computer is 1 1/2 years old. One other thing. As i'm typing this the message appears and disappears on it's own. It will do this once every 30 seconds.
View 9 Replies View RelatedToday when I tried to install four new, different programs and/or updates on my Windows XP Pro / HP Compaq P4 machine, I received a variety of error messages which all, in effect, stated that the programs can only be installed on machines equipped with Windows XP Pro, SP 2.I have Windows XP Pro, SP 2 installed on my machine and, obviously, for some reason that fact is not being recognized by Windows installer or something else. Does anyone have a solution? Thanks.
View 12 Replies View RelatedI'm now praying that this will get fixed--my computer isn't recognizing any cd's I put in my d drive. It won't show up anywhere and when I go to my device manager there's a red x on top of the cd icon. I don't have any viruses or anything-I've run everything- and I've tried unplugging some of the wires and replugging them. I don't even know what that;s suposed to do or which wire is which. If anyone can help I would be soooooo grateful. my dad'll blame this on me if it doesnt get fixed asap. I have windows xp. and when I type in D:/ into run, I get the message:
D:/ refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it stil cannot be located, the information might have been moved to a different location.
I've got a IBM ThinkCenter that just won't boot. It powers on just fine, and I even tried installing a brand new power supply, so power isn't the problem. When I turn it on, I almost immediately get the IBM and Intel logos on screen but that's all. The machine does not seem to try to read from the hard drive, CD ROM or A drive. It never allows me to enter the BIOS or try to start Windows. I'm not even sure if the keyboard and mouse are being recognized. Is this a hardware problem? if so what? or can I still get this thing to boot somehow?
View 11 Replies View Related