I recently had to reinstall Windows XP Home Edition on my machine because I was complacent and did not keep up on my updates. As a result, my machine as riddled with worms, trojans, etc. So, I used a Win 98 boot disk and deleted the partition and installed a fresh XP. I ordered Service Pack 2 and installed that along with Norman Antivirus. However, I still need to get up to speed from SVC Pack2. Any suggestions on where I can find these updates so I can download them?I won't be using my machine as I don't want to risk it. In other words, that page where you go and your machine is scanned for applicable updates won't work because I'll be using someone else's machine. I was hoping someone would be able to tell me exactly where to go and I'll download them onto my jumpdrive.
i have got a hd with a little bit over 6GB and i dont know if i should download servive pack 2. can you tell me what i can get from this and how much space it will take, (i kno the downloads like 1GB), but will it take less space on disk? id like to know what id be gaining from service pack 2.
I just installed Windows XP Pro onto a band new drive. Installed the drivers and the antivirus. Next I went to get widows updates. I went to express because I was in a hurry. It installed service pack 2. Now it will not go into windows in any form. I have tried safe mode and regular mode. It gets to the XP loading screen in normal mode then reboots. In safe mode it runs through the list of files that it loads then reboots. Is my only way to reinstall windows?? Ihave had a fit to try to get into this machine. I hate to start from scratch again.
I went through Microsoft Update to get the latest updates for a PC that only has SP1 installed (and was missing 50 Critical Updates to boot). After I installed the 50 CUs the next time I logged into Microsoft Update I was prompted to download SP2. Everything went well until the Registry backup portion of the SP2 installation routine.
About 6 registry entries couldn't be backed up. I ignored them and tried to proceed but SP2 eventually came to a stop where my only option was to choose 'OK' and it began to undo whatever changes it had done.
I shut down every startup item using CodeStuff's Starter prior to this update. There is no AV running or anything else. Microsoft Update didn't work originally so I reregistered a couple of .dlls
Downloaded the new Service pack 3 update for Windows XP? I seem to remember it gave me problems with my pc re-booting. Hpw dp I get rid of the yellow icon sitting in my tray?
The Service pack starts out ok, then a little way into the process it says "cannot back up update. Access is denied": with options to retry, abort or ignore. The only real option is to ignore, and it carries on. About 5 mins later the whole process aborts saying sp 2 has not installed. press ok to undo what its done, and after its done that, it says windows has been partially updated, and may not work correctly
I did a full HP system restore and the Computer guy who came to my house installed the Service Pack 3, the latest version. I used to have Service Pack 1. I have had quite a few problems since then because of the full system restore and having to re-install alot of my programs, etc. But anyway I noticed today, that down in my system tray (or whatever you call it) on the bottom right of my computer where all the little icons are, there is this Microsoft Updates Automatic Updater with the yellow shield and it said that an update ready to install so I tried installing it. And this is what it said:
Automatic Updates Some updates could not be installed The following updates were not installed: Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update for .NET versions 2.0 through 3.5 (KB951847) x86 ....SO- that seems like a conflict since my computer had Service Pack 3 and the Microsoft Updates is trying to install this Service Pack 1 thing. What should I do? Do I have to get it all in sync somehow and is this messing up things on my computer? Also does this mean I am missing out on all the correct updates for my computer?
I have windows XP professional and recieve automatic updates on my computer on a regular basis. Does service pack 3 automatically install? I receive a yellow shield on my task bar informing me that updates are ready to install, I click the update button and it tells me to install service pack 3. I try the install and when I get to the halfway point of Performing Inventory I receive an error message: Service pack 3 could not back up registry value....ABORT-RETRY-IGNORE. no matter what button I select the results are the same Failed to Install.
Once I installed sp3, I could not get past the windows loading screen, so I started in safemode and uninstalled sp3 that way. My question is, does uninstalling sp3 remove sp2 as well. I can not see sp2 under add/remove programs, but my windows update history says I downloaded sp2 last May.
I'm working on a ASUS F5V laptop. The system had some problems, it has to be returned to the manufacturer on an RMA, and they re-installed Windows XP Pro circa December 2007. When I got the machine back it needed many Windows updates. The first was SP3, then there were 41 OS updates, and 9 hardware and other updates. The install process got to #46 of 50, KB951847 (Updated for .NET versions 2.0 through 3.5). The screen had not moved for an hour at that point but the same screen remained. I canceled the install, it reported immediately that cancellation was taking place, and then it stopped. No indication it was rolling back the updates.
I have had Windows XP on my computer for 3 years, during that time I have had no problems with updates. A couple of days ago updates were running when I got the following message box. Service pack 3 setup. Access denied1! Microsoft will now un-install the current updates. At this point I was in a hurry to leave and shut off my computer thinking that when I started up again, the updates would resume their activity.......
Every time I try to download SP2 computer restarts during the installation, specifically when its making backup files. I got this error signature after the computer rebooted I have a Widows XP Home edition.
My friend just got the net however she cant use it because she needs SP2. shes on SP1 Shes using a wireless connection. she cant connect to the net to download SP2 then to SP3. so is there a way I can download it? then pass it to her via USB? Link to download?
ANYBODY OUT THERE KNOW HOW TO UPGRADE MY WINDOWS XP,PRO(SP1)-TO WINDOWS XP,PRO(SP2)- I,JUST NEED TO UPGRADE. I DON`T WANT TO LOSE ANY OF MY UTILITIES OR PROGRAMS THAT CAME WITH MY COMPUTER. IF ANYONE KNOWS WHERE TO GO, AND WHAT TO DO
when I use the web based reader,I cannot open the text box to post a new question,and yet I can open the text box to post an answer to a post. when i select new question my screen flashes and nothing happens.Running xp pro with sp2.
If you go to Microsoft to download it it is old and it do't have all the updates. The Date Published is 08/10/2004.Is there any place to get the most updated version?
i have heard many good and bad things about teh new service pack and being a novice i am having a hard time trying to find a straight yes or no answer anywhere all im finding is very technical answers that i do not understand half of what people are saying
I have a retail version of Windows XP Pro without any service packs. Where can I download SP3? I looked at Microsoft's website but it is way to confusing. I think I downloaded SP3 but it said it was meant for IT professionals to be used on a network.
I have service pack 3 on my desktop pc with windows xp. is it possible to downgrade to service pack, my wireless usb adapter will work on it properly, This is what I was told to do by a tech at Linksys just now, although it worked fine last night, they know they have issues with service pack 3 on xp, and have not got a driver working yet for service pack So they told me to downgrade my pc to service pack 2 until they do have a good driver
I tried downloading service pack 2 and it messed up my computer and it takes a while to get onto it and the internet is slow. I can only use it in safe mode. Please tell me what to do, besides reboot the computer, for I have done that 2 times already.
I normally remove the updates/SPs from my Windows folder after a few days of running with the SP installed. All those packs can take up a ton of space. I move them to a separate folder for safe keeping for about a week, then, if all is well, I delete them. I don't think I've deleted the IE7 SP, but I don't know what the SP number is.
Is there any way to get a copy of service pack 1 OTHER than from Microsoft?....I bought my copy of XP Pro at a computer show and its license key is no good...so I can't install the version from MS
Concerning windows XP i'm being promted with an update to install service pack 3 (SP3) i'm currently running on (SP2) i've researched on (SP3) but before installing the upgrade would just like to know from users already using (SP3) what their comments are.
I am unable to install windows xp service pack 2. I have downloaded it and it gets to final stages of instalation (performing cleaning) and then I get an error message saying that it could not complete installation. I have a proper copy of win xp and have used it for ages and registered it. The problems came when I got a new motherboard and it asked me to register windows which I did successfully. When I went to download SP2 it told me I had to register windows and to follow certain steps in the control panel.
