NTFS Sys Have Caused An Error / Blue Screen In Home
Jan 19, 2006
I installed windows XP on a system that I am servicing.The floppy drive wasnt installed correctly in the first place, and windows XP kept crashing to a blue screen, then restarting.I unchecked the Reboot automatically after system failure checkbox and recorded the error.Its written below..It doesnt happen at any specific time, or when a specific application is open..It did it after the first fresh install, so i did ANOTHER fresh Install, and its doing it again.
Blue screen error caused by a device or driver You received this message because a hardware device, its driver, or related software has caused a blue screen error. This type of error means the computer has shut down abruptly to protect itself from potential data corruption or loss. In this case, we were unable to detect the specific device or driver that caused the problem.
iam running windows xp....ive been having problems with my pc forever and i can never seem to work out if its bad ram or a memory issue. Anytime my pc is running for a long period of time it seems to hang and give me the blue screen, if i try to run a media program or burn a cd or anything along those lines it hangs also....What could this problem be? do i need to let someone look into my system or can it be resolved at all. Ive had every error msg i believe...it seems to always tell me its a device error when it hangs or when i reboot it gives me that msg and then reports the proble
I've recently been getting this weird error when i perform a full scan on my computer, using ANY anti virus scanning program(TrendMicro,OnlinePanda,AVG). It leads into a blue screen saying / A problem has been detected and windows has been shut down to prevent damage to your computer.DRIVER_IRQL_NOT_LESS_OR_EQUAL If this is the first time you've seen this stop screen, restart your computer. If this screen appears again, follow these steps: Check to make sure any new hardware or software is properly installed. If this is a new installation, ask your hardware or software manufacturer for any windows updates you might need.If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing. If you need to use safe mode to remove or disable components, restart your computer, press F8 to select advanced startup options, and then select safe mode.
anyone that knows what I can do to fix this problem would help me out alot. I am trying to upgrade my dads computer from XP Home which he has to XP Pro which I brought for him. I go thru all the options to upgrade and the computer restarts and goes to bluescreen and gives me this message."Setup cannot find a cd-rom drive. make sure your cd-rom is on and properly connected to your computer. if it is a SCSI cd-rom drive make sure your SCSI devices are properly terminated. see your computer or SCSI adapter documentation for more info. setup cannot continue, to quit setup press F3"..I tried setting the DVD Drives to Boot first in BIOS and that did not work, I even tried removing the BIOS Battery for a little to reset BIOS and that just made my speakers work bad for some reason, now they are raspy. I just cant figure this one out, luckaly there are people out there that can teach me,
I get a blue screen saying I have problem with NTFS.sys. I went to My computers>Manage>event viewer >System.The computer has rebooted from a bugcheck. The bugcheck was: 0x10000050 (0xf637c508, 0x00000001, 0xf7599278, 0x00000000). A dump was saved in: C:WINDOWSMinidumpMini121705-01.dmp.I have attached the dump file (changed .dmp to txt)
I installed XP home from an AMD image to an Intell system. It seemed to go fine,windows was activated and I finished installing drivers and programs.I installed SP3 and started to have problems with an occasional blue screen and reboot. I searched online for " XP Home reboot" and found referance to the same problem but in reverse. INTEL TO AMD in sp3 when intelppm.sys tries to load and the AMD system doesnt recognize it.I managed to get the computer to load windows and removed sp3. Now I dont get a blue screen but it continualy reboots. I cant even get into safe mode. I dont want to use the restoration program because I am afraid it wont recognize the new mother board and CPU.
When booting PC up, there is a problem with URLMON.DLL, i took the harddrive out and copied over the file, and was given information that some other DLL files were damaged also, i painstakingly copied the files over, untill it booted up, ran all the scans I could - MS AntiSpy, Adaware, Norton AV, and Norton WinDoctor, Spy Subtract. Rebooted the computer and the First URLMON.DLL error message came up and would not allow me back into windows.
Today I tried to update a notebook (Gateway W3223-Ul1) from Xp Home To Xp Pro. Now the computer wont even start I get this blue Screen (look at photo).I can only get the system to start in safe mode, trying to start it normally puts me in an endless look of blue screens.
Decided to do the semi annual reinstall of XP after boot time got up to 9 mins and shutdown got to 5 mins.So nothing was really broken.Its a no-brand desktop machine based on GA-M55Plus motherboard. Have a main disk SATA II and two more in a Raid-0 array.Prior to starting had reassembled the latest drivers for motherboard, video card, printers, mouse etc and put on a USB stick..Disconnected the Raid array, blew away the partition on the main disk and installed XP from original media (which has SP2 included)
All went pretty smoothly but after about 6 hours started getting BSOD - its still too quick to read KERNEL something.along with the advice to uninstall recent additions / drivers etc.This happens after a few minutes or a few hours.Well the last thing it did was 71 updates from Microsoft!! (Including the cursed IE-8 which had previously caused grief on this machine)I can think of two things that have changed since before.
1. the 'latest' drivers 2. the order things were applied
Can you help with any advice as to the order things should be installed. Whilst waiting for MS to get around to delivering updates I was installing the drivers etc. Starting with the chipset and video drivers.So is it best to wait hours to days for MS to deliver all the junk? (without the mobo drivers its a bit average)Can you get an image of XP with SP3 included - better yet all the 71 other vitally important updates? Do you think it would help to wind back the auto installed updates and try and get them in small chunks?(and why cant you download once and use many times!)
After a current power outage, my screen came up blue with the following information: unmountable_boot_volume..blue screen reads:if problems continue, disable or remove any newly installed hardware or software(nothing new or added). disable BIOS memory options such as caching or shadowing. If you need to use Safe Mode to remove or disale compnents, restart you computer, press F8 to select advanced Startup Options, and then select Safe Mode.All this has been tried and the blue screen continues to come up.
I am running Windows XP Home Edition, and I have recently been having frequent crash errors. Everything seems to be running fine and suddenly the screen goes blue and a long message shows that said that the computer is shutting down to prevent a crash.
the computer freezes at start-up on the blue screen that shows the Windows XP logo, and the words "Windows is starting up". I found that I can navigate through this at startup by tapping the F8 key rapidly before that screen appears. I tried the System Restore to a date earlier than the administrator's work, but no help. Is their a repair or restore procedure that will cure this problem?
I have a Toshiba Laptop Satellite with windows XP, Service pack 2, and always when I open a photo or see a movie with windows media player it changes the screen resolution and always came too big so I have to restart the laptop. The solution of microsoft is to update the graphic driver but when I go to the web page they don´t have an update for me, and also in the toshiba web page.
Man, my computer for the last two weeks have been crashing like an emo. I mean, when I play GTA: San Adreas, in 20 minutes, I get a BSOD with a stop error. When I put hardware acceleration to full, in a half an hour, I get a BSOD with a similar error. Believe me, I got three kinds of errors, and some were from different time. I believe the problem either came from the either the PSU, new 512 mb of ram, old 512, CPU, system board, or the graphic card. I'll try to post the error as best as I can. So, is there a solution to this? Error Message: STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER (Q293078) This is one of them, but there another one with KMODE that I can't seem to remember. Also, sometimes, after it tries to recover from a serious error, the computer shuts down during the bootup before I can choose which XP version I can choose. Also, I hate to say this, but I'm not using a legit windows copy sp1, but I have updated to sp2.
i had XP 2008 virus/spyware, which I think I managed to get rid of with Malwarebytes' Anti Malware and System Mechanic 7. Now I have a new problem. After receiving a recent download from microsoft, upon restarting, I get the blue screen of death with this message; STOP: C000021a (Fatal System Error) The Windows Logon Process system process terminated unexpectedly with a status of 0xc0000005 (0x00000000 0x00000000)
I can't get anywhere into Windows, I've done F2, F8, F12, everything I could think of without risking more damage. I've booted from the system mechanic CD with the Hard Drive recovery, and while it said it found and fixed a problem, it didn't fix this one.
After around 10-15 min after logging in a program error box opens up saying winlogon.exe fatal error then it switches to a blue screen saying fatal error c0000021a error. I have windows 2000 proffessional and a HP compaq nc6120 laptop.
I'm getting pretty frequent shutdowns with the below information. When the box re-boots, the message says device driver but never can point which device driver. Can anyone have a look at this and give me some advice?
Encountered a Blue Screen of Death error. The error stated that I should run Chkdsk and then proceeds to restart and bring me to the Windows boot selection screen (safe mode, last known good configuration, normally). No matter which choice I pick, it always leads to the BSOD then restarts. Since this is getting me nowhere fast, I want to just format and reinstall windows. I do not have my recovery CDs, and when I enter the BIOS to change the boot sequence I cannot change it so the CD drive is above the hard drive in priority. The reason it gives me in the bios is that "All items on this menu cannot be modified in user mode. If any items require changes, please consult your system supervisor. Any ideas on how I can boot off the cd and reinstall windows from scratch?
When I start the computer, it asks if for the choice of Safe Mode, w/ Networking, w/Command Prompt or Normally.
I've tried them all and if I try it normally, it won't get past the XP loading screen. It's loading and then it flashes a blue screen for a second and then restarts the computer again.
I tried pressing F8 at boot and selected 'Disable automatic restart on system failure' and this is what I get
I even tried using this http://forums.techguy.org/6669592-post28.html to get to chkdsk At boot, F12, chose CD/DVD, but still nothing, I even tried disabling boot from +HDD, FDD and LAN from the bios setup menu to see if it works and this is what I got, it just keeps going on and on unless I enable boot from +HDD
The start of my problem is that I was receiving an error 'cannot initialize lsass.exe service'.After repairing XP SP2, the following is displayed every time that I boot:SAFE Mode - black screen with 'safe mode' in bottom corners of screen Windows Mode - blue screen.The mouse is responding.There are no icons.There is no text (except for 'safe mode' as above)CTRL/ALT/DEL does not display task manager.CTRL/ESCAPE does not display anything.Clicking on various parts of thescreen has no effect.I have replaced Explorer.exe from c:i386
I couldnt start up windows. It would hang at the windows loading screen and go no further. So I was told to try a repair-install. And thats where even more trouble has started. So I started to repair-install. During the Windows Install setup, it gets almost to the point of being completed, but gave me a blue screen error STOP message at around the "18 minutes left" mark. During "Registering components". It would do this every time at the same spot. So I searched a bit about how to solve the problem. One suggestion I found on the interwebs was to try it with only one stick of ram installed, I have four overall at 2gb. So I tried that, next time I boot up to the comp, it loads up the bios, and then goes to the black windows loading screen with the loading bar, then starts with a blue screen saying "Setup is being restarted" So I figure its restarting my windows installation since it never was completed, after that message, the screen goes black with a cursor, and stays that way forever. I immediately put all the ram back in, and no luck, same thing. I tested each individual ram stick, same thing, just goes black. So now, I can't even seem to re-install windows. Did my hard drive just crap out? Some hardware issue? Im already thinking about buying a new fresh hard drive, installing windows on there, and just moving all my files from the old hard drive over to the new one. Though that would be a pain, I really want to save my current drive! And all the data on it.
I was informed today that our home computer has been freezing over the last day or so. I logged on and looked up some info on the error i was described, then perhaps fortunately, i got the vile BSOD. This is what was contained:Then it began a memory dump.It claims a device driver error, but i do not recall installing anything recently. the windows report proved less than helpful (surprise).
I seem to have bad luck with multiple partitions on one drive. I have a 160 gb hdd that was partitoned with one approx 137gb partition with windows xp. It was working fine. I decided to partition the remaining space which was something like 25gb. I did it from windows xp in the disk managment snap-in. It worked fine until I formatted the new 25gb partition and assigned the page file to this drive. I had not rebooted before formatting the new drive and I believe the format is what screwed up the drive. I have tried to chkdsk /r but it took forever and then crashed. I believe windows improperly sized the partition over part of the original C partition. I really hate logical drives. I always seem to have some sort of data loss with them..
I have seen a similar problem posted previously on this forum. But after reading it i think this is a different problem, so, here goes: I recently bought a new graphic card: Radeon all-in-wonder x1800xl. Installed it on a clean system (did a reformat before i installed). The problem occurs after usually 30-60 minutes of gaming (so far with oblivion, black & white 2). The game freezes for about 30 sec and then goes into blue-screen mode.
The message is as follows: Kernel-Data-inpage-error stop error screen then there are a lot of numbers etc. I have sometimes noticed a slight change in fan noise prior to freeze (speeding up) After reebot everything's back to normal.........
Recently we've been getting "Blue Screen Errors" on our Windows XP. The most common one is called "Blue Screen error caused by a device or driver." Since they mention a likely hardware or software problem, I suspect our computer screen or speakers might be to blame. A couple months ago, we hooked up a screen and speakers from different brands. I think the screen's brand name is Westinghouse and the model number is LCM-17v8, and I think the speakers brand name is The Digital Experience inc., Model number gem 2.0 USB.
We've also gotten other error messages along with this one, such as "Address a problem with your computer", also strongly suggesting a problem with hardware, and "Troubleshoot a problem with your audio software". Is it possible that the screen or speakers may be incompatible with the computer, resulting in these errors, or would it be something else?
I have a Prolink Hurricane 9601C Modem. It has two LED's indicating Power and Link. As of recently, the Link LED, starts to flash on and off, and all network connections get terminated. The Driver software of the Modem stops responding. I tried to unplug the network cable and re attaching it, but nothing happens.... The System will not shutdown either. Once windows logs off, I get this Blue Screen Error.A problem has been detected and windows has been shut down to prevent damage to your computer.
For the last three days I have been getting a blue screen error, the only thing I have done is ran Softwar inspector Secuna, and uninstalled Abobe Reader and reinstalled the updated version.Error message: A problem has been detectd and Windows has been shut down to prevent damage to your computer.KERNEL_STACK_INPAGE_ERROR If this is the first time you've seen this stop error Screen, restart your computer. If this screen apperas again floow these steps. Check to make sure any new hardware or software is properly installed. If this is a new install ask your hardware or software manufactor for any windows updates you might need. If the problem continues, disable or remove any new installed hardware or software. Disable BIOS memory options such as coaching or shadowing. If you need to use Safe Mode to remove or disable components restart your computer. Press F8 to select Advanced Start up Options, and then select Safe Mode.
I am running XP media center 2005 and it is a pretty fresh install. All of a sudden today I am having crashes and the one blue screen I got had this code on it - STOP: 0X0000008E(0XC000005, 0X805AE8AC, 0XA55DEBDC,0X00000000)
I've recently put together a PC and for the first 3 weeks it was running perfectly. Then in the past week, it started crashing completely randomly it seems. No error messages or blue screens, it just auto restarts. On reboot, it has an error log (the following are 5 examples out of about 10 crashes so far) Ex 1 Error code 1000008e, parameter1 c0000005, parameter2 c0384dc0, parameter3 ebf4e4ec, parameter4 00000000. (This occurred when I was finishing an installation of iTunes..don't know if that's of significance?) Ex 2 Error code 1000008e, parameter1 c0000005, parameter2 c038d724, parameter3 ecb494ec, parameter4 00000000. Ex 3 Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec2dc4e4, parameter4 00000000. Ex 4 Error code 1000008e, parameter1 c0000005, parameter2 c038c2f4, parameter3 ec94189c, parameter4 00000000. Ex 5 Error code 1000008e, parameter1 c0000005, parameter2 804e7fc2, parameter3 ec4da4e4, parameter4 00000000. I've not installed any new hardware in the last week nor any major programs. I've got no spyware (according to spybot). Norton windoctor reported a missing msvcr80.dll (i realise i can't just add this .dll back into my system...plus I'm told it's a necessary .dll for office 2007 and .NET 2.0) Any idea what my problems could be?? PS: the attached jpegs shows the errors windoctor comes up with
I have XP Media Center on my desktop and got a BSOD the other day. Unfortunately, I didn't copy the error code on the BSOD down. Now, whenever I try to open IE or iTunes or just about any program, the cursor just stays in the 'working' mode and the computer never does anything else. I can't even restart it via the Start menu. I have tried to do a system restore, but the pc freezes just when I click on 'next' to start the restore. I've even tried the system restore in safe mode with command prompts and got the same result. I ran Spybot, Ad Aware and AVG in safe mode, but they did not pick up anything. Not sure if that is relevant to my problem... Is there any way I can force the BSOD so I can get an error code? Does anyone have any idea what might be causing my problems?
