I just have a query with regard to my laptop. Before I go to bed at night I always instruct my laptop's monitor to switch off via the Power Schemes screen, however I tend to find that it often simply flashes off then switches back on again immediately, or it doesn't go off at all. More often than not I have to repeat the process twice (Power Schemes -> Turn off monitor -> After 2 mins -> Apply/OK) before it obeys. Any ideas as to why this might be?
I wonder if it is possible to switch off the computer's monitor manually. System Control / Energy provides the possibility to define how long the computer must idle to disable the monitor. I want to do that "by hand". Is that possible?
My laptop was in perfect working order last night but when I came to turn it on this morning it wouldn't. No screen, no sound. Tried again and got a high pitched continuos beep from it so turned it off/on again, nothing. Pressed F8 to try start it up in safe mode but it wont do that either. There is NO screen at all coming up. If i cant start it up in safe mode is it DEAD?
Yesterday he was trying to copy a DVD. As far as I understand (which is limited), it froze and he turned it off. When you try to switch it on, you get a black screen with a white message. the jist of it says that Windows shut down and that to restart it you need to choose a mode - it gives you options 'safe mode' 'last known settings that worked' 'normal mode' etc. We have tried all of these modes. the most successful of which always looks really promising - you get the blue windows screen, logo and jingle it looks like it is starting up but then dies and the screen goes black. When you turn it on you get the black screen again and go around in circles.
use Windows XP to manage my wireless LAN connections (View available wireless connections > Change advanced settings > Wireless networks > Use Windows to configure my wireless network settings (checked)).My wireless antenna is always on and I notice that I can get an extra 25 minutes out of my laptop battery if I disable the wireless antenna. Is there an easy way to switch the antenna on/off, ie. without having to disable it each time?
I have tried a search here, but not found a thread with the same problem as mine. That may well be my fault; I am relatively inexperienced so may be using the wrong search terms. My apologies if that is the case.I have a Sony Vaio laptop running XP with a built in wireless which can be switched on or off with a sliding button at the front. The laptop has not been used for a couple of weeks, and now I find that it will not start up properly as long as the wireless is switched on. If it is on, the laptop constantly restarts then crashes and restarts again, never getting started up properly. If I switch off the wireless, it will start perfectly normally. If I then switch the wireless on after a normal startup, it may take a few seconds or a few minutes, but it will then crash and go back to the restart-crash cycle. There is an error screen which comes up but it is too briefly displayed to read it or get a screenshot.
I did a little research and tried a system restore which did not work. I also tried restarting without my wireless keyboard and mouse hooked up. When I did that and switched on the wireless, it stayed up long enough for me to connect to my network (the only time it was up long enough) then reverted to the restart/crash cycle again.
My daughter 'flooded' the basement yesterday. We quickly unplugged her computer and found a slight amount of water on the bottom of her tower. Now, her computer seems to start up ok but there is no picture on the monitor. None of the wires got wet, but there is a small opening on the bottom where the case closes. Is it possible that so little water damaged her computer? It's only the monitor that doesn't work. We hooked up an old one as well, no luck.
My Acer XP screen cracked.I looked it up and was able to connect it to a different monitor by using the command: Fn then pressing F5 three times. It worked for the last few months, but Yesterday I accidentally hit the power cord of the monitor and it switched back to the laptop. I tried the command again but this time it didn't work.
Is there another command or something I could do to connect my laptop to the other monitor?
When I turn on the machine, the screen stay blank, no bios display, no windows boot logo, but the power light and hdd light flash away, AND once its up to the Welcome screen, the display kicks in and no further problems.She tells me it once did show a bios and Windows boot screen, and I can't seem to work out whats going on to blank the screen during this time. I can't even F2/F12 to a visible bios setup to see if its a setting, but I know its going in, because it stay blank forever
For whatever reason, my Function Key isn't working- so I can't turn up my monitor brightness on my laptop. Is there a way to do this from the menu rather than the Function keys?
My Latitude C610 with XP service Pack 2 is connected with external monitor and only shows wall paper on external monitor and not shows icons or any open application.
I have a multi-boot system set up and it Includes 3 OS's, Windows 7, XP, and a flavor of Linux. My XP installation does not recognize hardly any of the drivers for the hardware on my HP pavilion dv2941se laptop. Beings it doesn't have the driver for my network card i cant get online to search for other drivers.
Hi the other day i tried to turn on my computer but it never reached the log in page, which meant I could not use the computer as I normally have to type in my password to go to my desktop screen. I don't know what to do. By the way this is not that laptop. What it does is, it starts up normally where it goes to the bit where is goes windows xp and then under there is a bar with a small bar sliding inside it, but then instead of going to the blue log in page it just becomes blank and restarts. Please help my currently I have to use this not so good laptop and I just can't live without the other laptop.
One week ago, the virus W32.Skybot.Worm infected my computes, so I cleaned it and Norton send mis archive to Quarantine. When I star my computer, the system say me it can be loaded the archive mpdat.exe. Some friends told me that I need to restart the system, but I don�t like to do it. Let it be another way to resolve this problem. Also I like to know what is the funtion of this archive.
My Sony VAIO starts. It's plugged in normally. The power lights flash, it checks the CD-RW drive, and then remains on with the main power light on and the fan on, but the screen remains black and nothing else happens. Windows XP doesn't load. No Sony logo, no "Operating system not found," nothing. It's like it's had a lobotomy.I haven't installed anything new, and the notebook has just been sitting around unplugged for a few days. The last thing I used it for was to burn a CD with Windows Media Player. The only change I can think of is that my USB tablet isn't plugged in.
I just moved in to college and set up my computer, but due to limited space didn't bring my second monitor. Now my aim, and ventrilo windows are still on the other monitor but no way to get them to the current monitor for use.
When Windows adds a new monitor using the standard driver, can it detect the aspect ratio? When I hooked up mine, all the resolution choice were for 4:3 monitors. There were no widescreen options. It should choose the monitor's native resolution on its own if the monitor is an LCD.
I have a old Dell computer which I brought a 24" Dell HD monitor. I upgraded it with a new graphics card which has both VGA and HD capability hook-ups. Now we have a new tower to go with exisiting 24" monitor. My problem is I can not get a old standard VGA monitor to work with the old system listed above. When I plug in the the VGA monitor plug in the VGA outlet in the old computer I get no signal to the monitor. What do I need to do with drivers or other wise to get the old computer back to being able to be used with the old VGA monitor?
my darn gateway monitor screen is too wide. How do i reduce it to the regular size? I pressed Ctrl and held down on the scroll lock and nothing happens. i tried to reset it with the monitor button but nothing happens.i can not view the right side graphic on my monitor
I replace my old LCD monitors (Dell 1905s) with new acer P223w's. I have a dual monitor display.I power off both monitors with one switch that cuts off the power. When I do this however, Windows makes the sound like a device has been disconnected and it messes up my monitor settings. This is very annoying and it didn't happen with my other monitors nor does it happen on my other Windows XP system with different monitors. It's like Windows is trying to be "smart" by thinking the monitor is gone. I do not want Windows to care if the monitor is powered off.
Was never able to restart after that. Normal boot shows the windows initial screen, but eventually just restarts, safe mode does the same thing whether it's with network, command line or plain safe mode. Last known good configuration does the same.Needed to use a file so decided to remove the HD and re-install to another PC. I did have access to the file in question but now I'd like to fix the problem. The other system uses AVG. I started a scan and it detected Cekar.d (A0003977.exe, wdfmgr.exe and initially ntldr.exe), Dropper.Inor (ntdetect.hta, A0003979.hta), PSW.Generic5.ABVW (ctfmona.exe), PSW.OnlineGames.AAFI (ctfmonb.exe), PSW.Generic5.AFYK (ctfmond.exe), PSW.OnlineGames.ZWT (LotusHlp.exe) and some others but for whatever reason the scan stopped. I restarted it and now the AV still finds most of the threats it was seeing before but not Cekar.d. in the ntldr.exe file.
im running windows xp home edition sp3. while shutting down, my kid switched the pc off by the main switch. im getting a loop of starting up over and over and iv tried every option in advanced, ssafe mode etc, i just keep getting this loop of starting again and again. i got the bsod with unmountabe boot volume and a code, went to microsoft and the code cannot be found, i retyped it 3 times to make sure id typed it right and got error code not found. im using a netbook to find a resolution and i dont have any connectors to my pc. i havnt installed any new hardware or software and my gut is telling me that its because of the pc being swithced off by the mains during shutdown because i had no problems untill this happened. if i cant get my pc to switch on, how do i sort it out. my windows disc wont work.
i plan to switch to windows vista from xp, but first have to find out the benefits of upgrading - and the vista features vis-a-vis the windows xp - as well as the system requirements for vista.
For some reason, if I log on to my account (an administrator account), then log off, none of the other users (my husband's admin. account or the kids' limited user accts) can be signed on. XP sits on the welcome screen for an unusually long time, then goes to just the user's wallpaper screen (no icons, no taskbar, nothing). Can't pull up task manager or warm boot, have to shut down & restart. I can log on any of the other accounts, and log off, and switch to mine, but not vice versa. Even if I don't do ANYTHING after signing on. So, the problems seems to be with my account settings somehow.
I took a machine that had Win9x installed, replaced it with XP Pro and now it won't shutdown automatically. I comes up with the old "It is now safe to turn of your computer" message.
My PC does not shut down completely after a shutdown. The screen reads - "It is safe to switch off your computer." Doing that causes Scandisk to auto-start while booting.
I'm trying to play Diablo II: LoD, which requires that the LoD expansion CD be in my CDROM drive. I mounted an image of the disc with Daemon such that it's in (virtual) Drive E: (normal CDROM drive is D:[b][/b]). But the game seems to only be checking my D: Drive for the disc, and it won't let me point to the E: Drive.
Is there a way to just switch the drive letters around, and if so, do you think this would even solve my problem? Perhaps there's a way I can just set E: as my default CDROM drive, so that the game would check there?
I just switched from Internet Explorer 6 to Firefox, which solved many headaches on my computer! I have now is how do I switch to Firefox as by default browser?
I installed XP SP3 last night, and all was seeming pretty ok, surprisingly.But I've discovered that I can no longer switch between users. When I try to switch, the system freezes as it is loading the desktop for the second user and all I can do is reboot to get out of it. infuriating! There's no problem at all if I log out of my user account, and my wife then logs into hers. but they just won't run at the same time as they used to. I've tried checking to see if Terminal Services and RPC are running in the services list, and both are, so it's not that.
