Insufficient System Resources Exist To Complete The API - Tried Safe Mode
Oct 1, 2009
I have an desktop PC installed with Windows XP. Yesterday I realised that the free space in my C: drive was rapidly decreasing and before I could take any action, the free space was in KB's and the computer shut down.After switching it on, it comes up with the lsass.exe system error - 'Insufficient system resources exist to complete the API'. It only offers the choice of OK and when you click this it restarts and comes up with the same error again, and you can repeat this forever I tried to start in Safe mode also,but the computer restarts.
I have an Acer TravelMate 2303LC laptop. Yesterday I realised I was out of space on the C: drive (6MB I think) and was planning to delete/move files to free up space tonight. However after switching it on today it comes up with the lsass.exe system error - 'insufficient system resources exist to complete the API'. It only offers the choice of OK and when you click this it restarts and comes up with the same error again, and you can repeat this forever
I had Win XP and my laptop does not start it only gives me this message and then reebot and the window with these message only has the option ok so its a cycle I look to other post about these and says that I shoul liberate some of my disk memory but I can't enter in safe mode I already tried and this is a real problem cause I have 2 disk one of them removable but is only 8 GB and its completely clean it has nothing on it and the other one is the disk of my computer I can not remove it and is 8 GB too. I didn't install anything but the programs that I really need and my messenge
I have a Lite-On SHW-160P6S DVD drive. Just recently reinstalled windows and reformatted and was in the process of gradually getting everything set up and installed, when my drive disappeared. I don't know exactly when, but it was gone. I checked the device manager and it said the driver was corrupted, no updated driver available, so I uninstalled and restarted. Upon restart, Windows recognizes the drive and begins to install it
i month ago i got an Acer laptop with dual 1.66 intel, XP Pro, 120GigHD, 2GigRAM, 128megVRAM, xp pro/sp2
the computer hibernates just fine if i start it up and hibernate immediately... but if i open anything, even if only for a few minutes and then close it again, then when i try and hibernate, it'll act like it's starting to hibernate and then give me the message:
"System Error: Insufficient System Resources Exist to Complete the API
When I startup Windows XP I get the following message:
"Windows cannot create a temporary profile directory. This may be caused by insufficient security rights. If this problem persists, contact your network administrator"
DETAIL: Insufficient system resources exist to complete the requested sequence
I know that this question has been asked but I could not find an answer that fixed the problem, so I thought I might try again. Whenever I try to hibernate my computer, the message, "Insufficient system resources to complete the API." comes up. Afterwards, anything concerning hibernation disappear and the hibernation button cannot be clicked. My system details are as follows: Dell Inspiron 9300 running Windows XP Media Center Edition. 1.73 ghz processor with 1.50 gb of ram. (I have heard that having over 1.0 gb of ram might cause this, but I could not find anything that could fix it.)
Have"Iomega Automatic Backup Pro Software" and the Iomega 80gb usb external hard drive This software works great for backing up data The only way I can get it to work for a complete system restore on my C/Drive is in safe mode! Tried it on another computer had same problem. One of the computers has Windows Xp Pro (media adtion) the other windows XP home.The Windows Pro is HP that has the recovery backup on seperate partion D/Drive , installed as fat32,. Normal system is on C/drive . I can do a back up the on the D/drive Fat32 but not the C/drive which is NTFS. This appears to be great software very simple to use nothing like Ghost 2003 . only problem it doesn't work for doing a complete system backup. (The reason I bought it) Was wondering if anyone has used this software and had similar difficulties ? Or if anyone has any idea what could be causing the problem?
I first noticed my computer slowing down dramatically. Then I noticed that my windows updates were not installing. Spent two weeks with windows update helpers and could not get them to install. Kept getting the message "Insufficiet system resources exist to complete the request". I have tried to clean up my computer, deleting temp files, histories, unused programs and they still will not load. On some of the attempts to delete old programs I do not use, I would get the same message and the program would not delete. Even bought System Mechanic 8.5 tried to install it and it won't install. Tried to install everything in safe mode, but they will not install
I can not bring up animated graphics on my screen. It will view most jpeg files but not gif files. I get a 'drawing failed' on the screen. When I call up a folder, only half the items show to the eye. The others are blank. When I call up a program, it says 'Insufficient system resources exist to complete the requested service'. I took screen shots through my print screen program and no problem to bring that program up. But when I go after them to put in Photobucket to post I get the 'Insufficient' message so I can't post them for you. It lets me do some things but not others?
When I try to put my system in hibernation, I frequently get the message "insufficient system resources exist to complete this API". My only alternative is to kill the power to the computer. I have 2.5GB of RAM and more than 35GB of unused space on drive C:. I have recently defragmented the C: drive and I have used drive cleanup
When I've been using my computer for a while and try to place it in 'Hibernate', I get a message that states the there are not enough resources. Is there a way to free up resources so it can go into hibernate
After I have had the computer on a bit, this error message comes up 'The win 16 subsysten has insufficient resources to continue running. Click OK, close application and restart' Then one of my programs, either perfect works or Print artist just closes and I have to stop everything and restart the computer to get it back on. All the other programs are still running and I can keep working for days with out hese programs, but when I want to use them I have to restart the computer all over again. They will then work for a bit again and then it starts all over again.
I get a error box that comes up that says "Insufficient Resources", now I only get this after playing a game for about 15 minutes every time I play. Before (about 5 formats ago (which has been awile) I would never get this, now it's happening every time and it frustrates me because i'm trying to play and then I get this error then after about 2 minutes my computer reboots.I have 1GB RAM, so i'm sure that's enough to play the games (I play on lowish-medium quality).
Over the past two years, I've built six computers for friends and co-workers, including some real screamin' gamers (P4, 3GHz, 2GB RAM, 256 MB video card, all running WinXP Pro). They all work fine, but all also seem to share one common annoyance. After being left on for some length of time (10-15 hours), they all seem to lock up. They don't completely freeze up - the mouse will work, but clicking on any icon gives the error message that "insufficient system resources exist for the requested operation ..". This happens even when the computers are unused for that time (i.e., overnight). I thought it was pretty obvious that something is eating up memory, so I installed AnalogX MaxMem to monitor the memory. It didn't help. Over time, the computer's available memory seemed to stay steadily around 70-75%, but even with MaxMem showing that much available memory, the computer still gave the "insufficient resource" message after being left on overnight.
I am constantly connected to the internet via the university's network, run AVG 7.1 free, spybot s&d and its tea timer, and ad-aware se personal, all with updated definitions. I run an ewido online scan once a week, but don't keep it installed since it causes my computer to boot much more slowly. I also have the most current windows updates, except WMPlayer 10, and .Net 2.0 because it seems unnecessary. Well, back to the problem. I was talking to my friend on AIM, when I got the message "The connection to the service was lost" and had options to try and reconnect, etc. I tried to load IE, but it gave me some error along the lines on "Unable to load (initialize?) IE due to insufficient resources." I have a gig of ram, 3.0 GHZ P4, 120 Gig of hdd space, about 80 gig free, and run CCleaner about twice a week.
Anyway, I've been clean according to those 3 programs I use frequently, but after I got kicked off AIM and IE wouldnt load, my favorites were empty, programs wouldnt load, i couldnt shut down, etc. So I hit the reset button. When rebooted, the BIOS screen showed, and stayed for along time which it never does. Then, it kind of froze. As illogical as this seems, I just hit the switch on the back of the powersupply and waited about 2 minutes. All of my fans are clear of dust and in working operation (GPU, CPU, and PSU). I havent installed or removed any hardware / software recently, etc. So when I restarted, I rebooted into "safe mode with network support" and ran Spybot, Adaware, AVG7.1 and Ewido online scan. None reported anything outstanding, but AVG notes that read errors occured for the MBR and boot sector. Ewido found "spyware.chitika" which it removed. I rebooted and am currently in "safe mode with networking" just to be safe, but my question is: what could have caused this? and how can I fix my MBR? Thanks for any suggestions. I have a final paper that I need to finish before friday!
Went into msconfig and set up safe boot on restart.PC will not load in safe mode or in normal mode it just keeps looping back to the same screen.I have tried all the options on the screen.Is their anyway to get back to msconfig.I have the XP setup disk.
Ran smitfraud and rebooted but my computer keeps freezing both in safe mode and normal. I tried last good configuration but the same thing happened. Either just a black screen with the mouse icon or frozen on the long list.
have a new virus in my computer that deleted one of my files in WINDOWSsystem32 folder, and now when I run my pc, I get an error saying that a file is missing from WINDOWSsystem32 , I want to run system recovery but it won't let me. I tried pressing almost all the F#, so I decided to run safe mode and do a system recovery from inside my windows xp, but my safe mode doesn't work ether. For safe mode I tried F8, and F5
My computer has been freezing up a lot. I tried to use different system tools like msconfig, scandisk,and ect. to try to find and fix the problem, but my computer can't find those tools. I know I had them because they came pre-installed in Windows XP. Lastly I tried to start my computer in safe mode, but when it get to the safe mode drivers loading screen my computer freezes up.
I have the spy bot on my other computer not this one and it is not networked at home. the problem is I can get the windows xp first page to come up but then it goes to safe mode safe mode network last working page and start windows automatically I have tried all and to no avail. the blue screen flashes for a nanosecond so I can't get to the restore part. Do you think my computer has crashed?
A guy in the office was transferring images from his digital camera to his PC when the screen froze. He now can't start up his OS unless in safe mode. I've tried "last known good configuration", used an old restore point, checked for clashes in Device Manager, done a diagnostic startup using msconfig and still no joy. The machine is out of warranty and we can't find the recovery disks anywhere. Also, because the software was preinstalled there's no original disc to do an XP repair job on it. What more can I try?
Computer having a boot problem. Computer turns on and the screen shows up showing XP loading then the screen just goes black not blue no error messages. I can boot it in safe mode and wanted to do a system restore but evidently system restore is turned off in safe mode so I cannot do that. I tried to boot several times in normal mode and I would get the XP is loading screen followed by a black screen with nothing on it.
One of my kids ran my laptop until it died and now when i try to start it up it goes to the Window XP screen with the progress bar going side to side and stops there. I can start the computer under safe mode which i'm doing now but when i try to restart it does the same thing and i need to start under safemode again.
I'm running XP and I need to restart my system in safe mode, but evertime i try run safe mode it freezes on certain drivers.First it froze on agp440.sys and now it is freezing up on mup.sys .
Basically the original problem was a non functioning WinXP OS that led to using the system restore disc on a Toshiba Satellite laptop. http://forums.techguy.org/windows-nt...dont-work.html
Now the system will only boot in safe mode. So far I've done the restore several times. Gone into msconfig, checked Hide Microsoft services and disabled the rest, unchecked load startup items and tried a Diagnostic Startup. Device Manager looks fine, but I tried disabling items without change. It looks like the Restore Disc is the right one for the system.
i was trying to get into safemode so i could run an antivirus scan, problem is whenever i tried going in safemode the blue screen would pop up and computer would restart. now for some dumb reason i thought maybe i could get in safemode if i used msconfig and selected safe mode from the boot menu. so the computer restarted and now it boots in safemode but the blue screen and restart happen everytime now. ive tried "start windows normally" but that boots in safemode. ive tried "last known good config" and that too boots in safemode. so now im stuck
