Hibernation In A Loop - Disabling ACPI
Sep 19, 2009
I messed with some setting in the window for display properties>screen saver>Power Option Properties. Don't remember what I did, but the next time I restarted the comp. it loads windows then immediately after the startup screen goes away it says it's going into hibernation and does.It will stay on in Safe Mode, but the checkmark that tells hib to be on or not is not there. I've tried disabling ACPI in the BIOS but that doesn't fix it.There has to be some setting in the registry that can be changed to disable hiber, but no one seems to know how.
View 7 Replies
ADVERTISEMENT
Oct 31, 2009
Recently my laptop starts to hibernate/shut down randomly, which is really annoying. I saw on web that lots of ppl have same problem, but in addition to theirs, my problem includes:
-it is certain that it's not over heating, because once it hibernates randomly, I went away for about 30 minutes to let it cool, then as soon as I turn it off, it IMMEDIATELY goes into hibernation again! without me even seeing the enter password screen!
-I have my laptop plugged into mains all the time
-I tried disabling hibernation through power option, but it still happens. when I can turn laptop back on, I found that the "Enable hibernation" box is magically checked!
-I reinstalled window xp about half a month ago, with updates and anti-virus. but this never ever have happened b4 I reinstalled the OS
-the case of "it hibernates as soon as it is turned on" has happened serveral times
-I use AVG anti-virus, and it detects no malware (however, I can not guaranteer there is absolutely no malware in my laptop)
-Once, it did not even hibernate, it just goes off instantly: as if I unplugged the mains and battery.
View 8 Replies
View Related
Nov 7, 2006
I just opened this computer I got from tigerdirect.com and I was loading windows 2000 pro onto it...It loads half way and I get this message:
ACPI Bios not fully compliant with the ACPI specification.
So I did what I read and When Setup starts again, press F7 (not F6) when you see the "Press F6 if you need to install a third-party SCSI or RAID driver" screen.
Windows automatically disables the installation of the ACPI HAL and installs the Standard PC HAL.
So win2k is installed but I cant seem to get onto the internet and update any of the drivers.
THe computer is a IBM netvista 8307 model. They had some deal on it awhile back for less than $150..so I couldnt pass it up.
Im kinda lost right now..not sure what the problem is.
I did add a new video card before I installed the OS. could that have been the problem?
If so..how would I go about fixing this.
View 2 Replies
View Related
Nov 29, 2008
I uninstalled my ACPI windows driver! How can I reinstall it?
View 2 Replies
View Related
Feb 10, 2006
Formated the drive, installed XP, it re-booted to continue the installation and then it hangs on a BSOD saying that my BIOS is not fully ACPI compatible. I am using an SATA drive. Specs: ASUS A8n-SLI 16 Deluxe, AMD 4200+X2 64 Dual Core, 250GB WD SATA drive, 2GB corsair 3200c2. I am thinking of just turning acpi off and then putting it back on once xp is on.
View 12 Replies
View Related
Nov 8, 2004
I have configured the powermanagement of my Windows XP clients (XP Prof. SP1 and SP2). I have setup the computers to enter standby after 1 h and hibernate after 2 h. The clients successfully wake up on LAN traffic.I would like to monitor the standby, hibernate and wake up events in any kind of event log.
View 4 Replies
View Related
Aug 12, 2002
Here is an easier way to do the Fresh Install with no ACPI. When setup is loading, the blue screen will ask if you have any raid devices, and to press F6. When it does that, press and hold F7, & Congratulations! No ACPI will be installed.
View 9 Replies
View Related
May 15, 2007
I accidentally formatted over my XP installation (should...have...used...gparted....not...partition...magic...) about a week ago. Fortunately I keep my files on a seperate partition. I put in the XP disk, and install as normal. Good, it reboots. XP logo shows for a split second, then..."Motherboard does not have ACPI support...blah blah blah http://hardware-update.com blah blah blah". Fine. Restart setup, in non ACPI mode. Reboot. Yay it works. Install videocard drivers, reboot. Now it just restarts after showing the XP logo for a split second. Damnit! Put in CD. Reinstall. Forgot to put on non-ACPI mode, get error again. Damnit. Restart install in non-ACPI mode....BAD_POOL bluescreen. Slam head on desk. Insert ubuntu cd. Install ubuntu. Go to techguy. Make post about XP install issues. Ask for help.
I'm going to a massive LAN party this weekend, and having XP would be nice, because I want to play Counter-strike, and not just UT and Doom. Thanks a bunch. Oh, hardware specs, right. AMD 4800+ 939, ASUS P5ND2 Platinum (or something) SLi, nVidia 7800 GTX, 1 GB 2-2-2-5 OCZ RAM, Antec NeoPower 480, 200 GB HDD, Linksys WMP54GS (stupid ubuntu not having ndiswrapper installed by default, stupid ndiswrapper refusing to install under ubuntu...), Creative xFi XtremeAudio.
View 14 Replies
View Related
Sep 24, 2006
I have just: Done a successful repair/rebuild of XP Home Did a CHKDSK /r/f on my System drive Defragmented my system drive with PerfectDisk Read and applied recommentations on changes so that I would see errors when my system re-boots Yet, When I shutdown my PC, it will shotdown, then re-boot again, without the benefit of a error messagw to help me figure out why it is re-booting instead of shutting down and powering off. Is there something wrong with my Phoenix Bios have ACPI On? What can I do to see error/warning messages on why my system re-boots when I shutdown?
Windows XP Home Edition Service Pack 2 (build 2600)
2.08 gigahertz AMD Athlon XP
128 kilobyte primary memory cache
512 kilobyte secondary memory cache
Board: ASUSTeK Computer INC. A7N8X Deluxe
Bus Clock: 166 megahertz
BIOS: Phoenix Technologies, LTD ASUS A7N8X Deluxe ACPI BIOS Rev 1009 09/27/2005
1024 Megabytes Installed Memory
Slot 'DDR1' has 512 MB
Slot 'DDR2' has 256 MB
Slot 'DDR3' has 256 MB
NVIDIA nForce2 ATA Controller (v2.6)
Graphics Card ? ATI AIW 9600- XT ? AGP
View 14 Replies
View Related
Jun 23, 2002
I installed a fresh copy of WIN2000 on my IBM Thinkpad A21m but I am having a problem setting up a device in Device Mangager. I have no idea what is going on.
When i reboot the laptop it prompts me that it has found a new piece of hardware and it wants me to install the driver for it. The problem is that I have no idea what device it is since all the devices that should be working are working - so i don't know what to do.
The clues that I have noticed that might help:
- the laptop takes a LOOOONG time to boot up (3 or 4 mins), and is sort of sluggish in operation (compared to how it ran when i bought it)
- my internet connection is super slow ( I have a DSL router that serves 3 computers incl. mine, the other two have XP and everythign runs smooth)
- the unknown device says it is located on the the "Microsoft ACPI-Compliant Embedded Controller"
Would any one know what Device this "Unknown Device" is??? I just need to know so i can install the driver so my system can run properly.
View 10 Replies
View Related
Jan 23, 2007
I changed the above setting in my device manager hoping to fix an annoying stutter problem caused with media player when my wireless signal would go out of range. I remembered changing the irq settings in win2k to solve conflicts on that system, but found that the options is not available in xp. A quick web search lead to a site which reproduced a knowledge base article from microsoft. Only, the article was truncated in a way such that the dangers of said action were not published. The drive boots up to the XP OS screen, hangs, blue screens, the end.
With my problem drive set up as a slave, is there a way to change the settings back, or manually cut and paste Hkeys, or system folders or the like to restore the drive to it's previous state? Seems logical same computer with the same installation of xp pro sp2
View 9 Replies
View Related
Nov 6, 2004
To enable or disable PIO/DMA modes simply follow these steps:Open Device Manager: Start - Run - DevMgmt.msc Expand the category "IDE ATA/ATAPI Controllers"Right click the desired IDE controller (Primary/Secondary) and choose Properties.Choose the "Advanced Settings" tab.Change "Transfer Mode" as necessary. Note: This option will only be available on hardware that supports this feature.
View 9 Replies
View Related
May 10, 2008
So I lost my hibernation function after going from 1GB of RAM to 4GB(dual channel). I've done plenty of research and found all the hot fixes and MS support articles, one catch...... They are all for x86 while I'm running' a 64x system. I want my hibernation back! Give me hibernation or give me death...well maybe not death but I'm considering downgrading back to 1GB just to get it back.
View 11 Replies
View Related
Oct 13, 2006
Every time you open an program or window in my wife's computer it immediately goes into hibernation mode. You can then go back into window/program out of hibernation, but then it immedaietly returns to hibernation.
View 3 Replies
View Related
Jun 17, 2006
I have recently hibernated my computer and now I cannot resume it. It comes up and says "Resuming Windows" to a black screen except for the white text.I cannot seem to find the hibernation file to delete it to see if that will fix it.
View 1 Replies
View Related
Sep 20, 2006
Right, got a Toshiba A30-151, had XP Home OEM installed on it when it left the factory (so no install disk), finally got round to doing a reinstall (been messing about with OSX, needed clearing off and starting from scratch anyway). Some time ago a copy of XP Pro (fully legal) was posted through my door addressed to someone else, with no return address, so i kept it. anyway, thought i'd finallly use this and installed it, but now i have no option to hibernate the laptop? The hibernate tab is not there in power management. I know it's supported, as i could hibernate it before i reformatted and reinstalled. any way round this, other than using my mate's Home OEM disk and my serial to reinstall?
View 8 Replies
View Related
Sep 3, 2005
I've seen very clear instructions on how to put a PC or
laptop into 'standby' or 'hibernation'. but I can't find ANYWHERE how to
bring the PC or laptop out of standby or hibernation. Can someone please tell me1. How to come out of 'standby'?2. How to come out of 'hibernation'?
View 6 Replies
View Related
Jul 4, 2005
i can't get my Dell Dimension 8100 (640MB RAM, 1.3 GHz P4) to go into
standby or hibernation mode. When I manually put the computer in standby or
hibernate, it wakes back up in about 5 minutes or so.
I've looked/read the articles in the knowledge base, which mentioned that
there was a problem with SP1 and USB mass storage devices. Well, I've got SP2
and there still is some problem going on!
View 11 Replies
View Related
Mar 9, 2009
I go into Control Panel >Power Options>Hibernate and I click on "enable Hibernation" then apply and I get the message that process cannot be enabled as another process is using file. I do a clean boot and try again but get the same message. Does anyone have an idea of which other process might be using the necessary file and how I can reenable Hibernation?
View 9 Replies
View Related
Feb 17, 2007
Windows pops up an error message box, with an "ok" box in it. The server app cannot be restarted until that silly box is clicked in. This is very irritating to me, because it only crashes when I go away from home, of course, when I need the watchdog most
View 8 Replies
View Related
Dec 25, 2007
Does anyone know how to disable the Windows Firewall/Internet Connection Sharing service in Windows XP SP2 in the registry? I know how to manually disable the service under Computer Management -->Services, but I would like to see if I can add/modify a registry key to do the trick.
View 2 Replies
View Related
Jul 16, 2005
Does anyone know how to disable the Windows Firewall/Internet Connection Sharing service in Windows XP SP2 in the registry? I know how to manually disable the service under Computer Management -->Services, but I would like to see if I can add/modify a registry key to do the trick.
View 4 Replies
View Related
Feb 18, 2008
I am having problems with my shared printer. I do not use a local area connection for anything except just printing, but it appears I disabled a service i shouldn't have to get it working.
View 9 Replies
View Related
Aug 8, 2007
I realize you can do a remote shutdown of a system by using the command line shutdown with -m. (Windows XP)
For security reasons is there any way to disable this from happening? Ie, some settings on computer X so that any other computer can't just randomly shut it down.I seem to have read somewhere that it's dependant on the Remote Proceedure Call service, but that can't be stopped.
View 3 Replies
View Related
Jun 25, 2006
I think I've finally stopped procrastinating and I'm ready to risk installing windows xp home edition SP2. But before I do, I want to be sure I do all the "prepare your computer" things I'm supposed to do. I did a complete hard drive backup. I'm running Norton System Works 2006, which includes Norton Anti-Virus. I thought I also had Norton Internet Security but apparently I do not. So I don't know what if anything I'm running for a firewall!!! [big problem perhaps, but a different thread!]
One message on this forum says "disable anti-virus and firewall..." In my case, how should I do that? I've disabled NAV "auto-protect" using the icon in my system tray. Is that enough, for NAV? I will disconnect entirely from the internet before installing SP2. But once I do that, do I still have to disable a firewall?
View 2 Replies
View Related
Aug 6, 2008
This problem just started occurring today. Whenever I lock the computer, then unlock it, automatic updates turns itself off and the red alert pops up in the taskbar. Same goes for when I restart the computer.
How can I fix this? I never turned them off and when I try to re-enable them, the security center tells me that it can't re-enable them for some reason, so I have to do it manually. However, the problem persists even after I turn them back on.
View 1 Replies
View Related
Jun 25, 2005
It seems like every time I turn around something (certainly not me or anyone else that uses this computer) removes the check mark that I've placed on the Recording tab of the Properties for my CD-Writers. I have several on this computer. This is getting to be a major nuisance.
View 12 Replies
View Related
Apr 15, 2006
Whenever I try to run Disk Cleanup, it starts to check how much space can be freed up, first by checking "Compress old files." Since I probably have something on the order of 5-10 million files on my computer (this isn't an exaggeration; I have several million files from research with medical data), this part of the scan essentially means that I always have to cancel Disk Cleanup, because it will never finish.Is there any way to do Disk Cleanup, but disable the scan for old files that Windows would want to compress?
View 16 Replies
View Related
Apr 28, 2006
I work for a very large company and the IT group has set all pc's to automatically go to screensaver and lockout after 10 minutes of inactivity (thanks security team!). I've found the registry keys and they are as follows:
Value 0
Name: ScreenSaveActive
Type: REG_SZ
Data: 1
Value 1
Name: ScreenSaverIsSecure
Type: REG_SZ
Data: 1
Value 2
Name: ScreenSaveTimeOut
Type: REG_SZ
Data: 600
Value 3
Name: SCRNSAVE.EXE
Type: REG_SZ
Data: cmpnydft.scr
Will is screw something up if I delete an entire value or key?
View 6 Replies
View Related
Mar 12, 2010
Hi
A8N SLI
1 GB Ram
6600 GT
Here goes, I had a dual boot system then I deinstalled Windows 7. I believe that Windows 7 leaves the boot loader so i ended up with.
Hard Drive 2: Bootable: Opening up the choise of OS between Windows 7 (even though Not installed hence my beliefe taht Win 7 leaves behind the boot loader). So on this screen I choose "earlier versions of windows and then it boots:
Hard Drive 1: Which has XP.
Since I wanted to clean this up I am trying a new install. Therefore I removed Hard Drive 2 and ran Win XP pro setup. Foolishly I believed someone who told me that there would be no problems. That XP would make HArd Drive one bootable and that then XP would install correctly.
I should perhaps note that I used a new copy of XP with service packs as I thought it would make more sense than the XP I've used previously which was the first version of XP.
Firstly, XP formatted the hard drive. Detected no problems. Then it copied across files. No Problem. Then on first loading XP I got the error message "Your BIOS" is not ACPI compliant. Contact Hardware Update.com to get update.
I have installed XP many many times on my system with exactly the same hardware and I have never got this message. Therefore I thought that maybe it was something to do with Windows 7 affecting the BIOS or maybe that XP with service packs conflicts with my motherboard. So I tried an earlier version of XP Pro that didn't have the service packs included.
Same message came up at the same time. On first running XP it gets to the Microsoft logo and then the same message comes up "BIOS not ACPI compliant."
At this point I thought that maybe the best thing would be to remove the CMOS battery. Clear the CMOS and therefore any bios setting would revert back to default and I could then proceed.
At this point when I rebooted the BIOS failed to detect the hard drive at all. I replaced it with another hard drive but still the BIOS doesn;t see a hard drive. I tried changing the SATA cables, changing which SATA port the drive connects too. I've now tested the hard drives in another PC and they are working.
So to recap:
BIOS doesn;t detect hard Drive.
Even when it did the XP installalation freezes at the fist run of XP saying BIOS not ACPI compliant.
As noted the hard drives worked before . I've reinstalled many times and never had any problems.
I am a total loss how to proceed. I've thought about flashing the BIOS with an update but since I've installed XP with exactly the same hard drive why should XP suddenly talk about ACPI. The BIOS not seeing a hard drive at all is weird. Even though I've changed SATA connectors on the hard drives and which connect to the Motherboard I'd expect it to see something.
ANy help very very much appreciated
View 2 Replies
View Related
Apr 3, 2005
During a typical dual-boot start-up, Windows provides you with a menu that allows for the selection of the desired O/S. However, after hibernating and restarting, the boot sequence DOES NOT GIVE YOU THIS OPTION! You can force things using the F8 key, but that simply generates a screen with two choices - continue with restart from hibernation, or delete the hibernation data and go to the O/S selection menu
View 5 Replies
View Related
