Dell Desktop Pc Wont Turn On?
Feb 9, 2010i have a 2 yr old dell desktop pc i was writing up course work and the pc just literally stopped working checked all fuses and battery what else could this be possibly hard drive do ya think
View 2 Repliesi have a 2 yr old dell desktop pc i was writing up course work and the pc just literally stopped working checked all fuses and battery what else could this be possibly hard drive do ya think
View 2 Repliescan anyone tell me how 2 turn on/off my wireless swith on windows xp.
View 1 Replies View RelatedIs dell optiplex gx620 desktop compatible with wireless networks? I am unable to connect to wifi networks
View 1 Replies View Relatedwhen I program my dell laptop screen saver it will not turn on,I have tried everything
View 6 Replies View Relatedi have a dell 6000, when i turn it on the xp starting sequence begins nad suddenly it shuts off with a message of fatal error and a lot of zeroes followed by a 5, what could be the problem
View 2 Replies View RelatedI downloaded a program and found out that I cannot delete it. Every time I turn on my pc It comes out and every time I log out, it stay on on my pc. So, I deleted it and then I discovered that all my programs became a executable link.
View 3 Replies View RelatedI have a Dell desktop pc given to me that I want to reboot to the factory settings to get the previous owner's crap off of it. However, after putting in the XP disk and starting up the computer I am not getting the hit any key to reboot from cd message I expected. (from what I've been reading maybe this is because XP was preinstalled) in any case I can hit F4 or F12 and am given options, but don't know the right way to reboot from here. I can easily follow instructions if someone can give them to me.
View 5 Replies View RelatedI have a Dell D430 running XP Pro. When I boot-up from a shut down, It takes the internal wifi connnection at least 5 minutes, after the desktop icons appear to load. Thisis true for the wired network connection as well. I cannot connect till these icons appear in the system tray.When I first received the computer, these icons were one of the 1st functions that loaded.
View 5 Replies View RelatedDell Dimension 8400 freezes several times a day when I'm surfing the net. I'm using Windows XP, Media Center Edition, 512 MB of Ram. The only thing to do when this happens is to turn off the power and restart. I stopped using Internet Explorer and switched to Firefox after this started happening with similar performance with both browsers. Used Spybot S&D and found some problems, however the freezing continues.
View 3 Replies View RelatedMy Dell Dimension 5000 (Win XP Home) which has worked fine for 2 yrs now starts in standby mode 90% of the time. Pressing and holding the on/off button only shuts it down. The box never starts to power up - I just get the on/off button flashing orange. If it does start up (after trying 20 times) it works perfectly. I've replaced the internal battery, disk space and memory are good, isolated the power supply, disabled Standby and Hibernate in Control Panel and BIOS. Regularly virus and malware checked, disk defragged etc. No new h/w installed.
View 6 Replies View RelatedI have a DELL computer with windows XP, and I have no desktop icons.My comp. turns on but once the screen comes up I have no icons.I don't even have the little start icon at the bottom, so I can't open anything.
View 12 Replies View RelatedI have a Dell desktop with XP operating system ram:- 2gb. It hangs up when you have offce database open, miscrosoft outlook and Internet Explorer open. Its strange how it happens only on my particular desktop and it doesnt happen when I access my profile on a different Personal Computer office. As soon as it freezes. Then it would nt work even if I log out and log in into my pc.
View 13 Replies View RelatedI just installed a new hard drive on my computer, it is a dell dimension E521, it had windows vista os on it, this was installed on the pc when I bought it ,after putting my new hard drive in I didn't have a recovery disk with windows vista but I did have an xp cd from my laptop so I've used it. The windows xp installed just fine on my pc but the problem I've run into is the drivers, the disk that came with it wouldn't work so I went to dell's website put in my service tag and downloaded all the drivers that it says my pc needs. everything installed ok except for my broadcom, which is not allowing internet, my warranty on this computer is out so I can't get any advise from them without paying a fee even though I bought the hard drive from them, and the computer! Just hoping I could get some help, and wondering if I have to install vista for everything to work right.
View 6 Replies View RelatedAfter putting Dell E520 in sleep mode for a day. upon restart logged in and a desktop came up that looked like a default dell set-up some program icons were there but my desktop image was not. No folders. Nothing I had customized for me was there.It was as if all files and folders I created or saved were deleted with no trace left behind.went into BIOS cked around everything looked o.k then shut down and started up same thing again. After doing this twice Started up again and logging in normally Everything came back up all folders and files , my desktop image everything as I had left it 2 days ago , totally strange.
View 3 Replies View RelatedI would like to upgrade my Dell 8400's graphic card.I am not a gamer.I just purchased a 21" HP widescreen monitor that is capable of 1920x1080 to replace the original (4:3 aspect ratio)Dell monitor that came with the computer.I just want a good quality,name-brand card that will provide the 1920x1080 resolution for the new monitor. The card that came with the computer is not capable of that resolution. My operating system is Windows XP.
View 10 Replies View RelatedI've been trying to bring my husband's older Dell 8100 P4 desktop back to life. It was an old ME system initially. I've done the following:Replaced the motherboard and ide cables New CMOS battery Flashed BIOS Replaced and upgraded the memory Reformatted the harddrive (using another system) and loaded Win XP Pro I've used this same harddrive (with XP Pro) sucessfully on another Dell so I know there is nothing wrong with the boot files. But when I install it in the broke Dell...no joy.
It hangs in the "Windows can not start normally" pick Safe Mode, Last Known Good Config...etc loop. None of the options work and it flashes a quick BSOD dump error (too fast for me to see) and then back through the loop.The BIOS recognizes all the drives, the memory, processor, etc.I also tried to boot with alot of the extra hardware removed (removed NIC, sound card, modem, un-hooked optical drives, etc) --- still same no-boot loop.
My computer asks for a password that i don't remember using before start up. Won't let me get to start up screen. How can i fix this?
View 1 Replies View RelatedI downloaded some windows updates but not all of them installed. When I go to Turn Off Computer, the "Turn Off" button has changed, indicating that when I hit it, it will install the updates. There's also a field I can click which will Turn Off without installing the updates. When I click the Turn Off buttion, it attempts to install two updates. It doesn't appear to be successful. Every time I Turn Off Computer it apparently tries to install the same two updates. I can reboot and do this over and over and they don't "take".There's nothing in Event Viewer to indicate what's going on. I couldn't find any installation logs though I'm not sure where to look.
View 1 Replies View RelatedOkay so I usually leave my computer on all the time. I went to bed and when I got up it was off and couldn't get it to turn on. So I assumed it might be the power supply so I went and bought a new one from stamples. He turned on for maybe 5 seconds then turned off. so I took it back thinking maybe I didn't have enough watts. The higher watts didn't doanything. I am lost without my computer can anyone help? I have Win XP..Could it be the fan? Even though the fan worked when i plugged in first PS...Second didnt do anything. Could it be something to do with motherboard?
View 8 Replies View RelatedI keep getting blue screen with page fault in non page area at start up. How do I fix this? I have Windows XP. Dell desktop.
View 6 Replies View Relateda friend has a Dell Dimension 4550 (P4-2Ghz, 60Gb HDD, 784mb RAM- added 512mb and a NEC DVD+/-R, circa 2002 I think?) and needs to do a clean install. He has the CD that came with it. We looked all over google and the Dell site and can't seem to find out how to do a clean install. We pressed F12 and tried to boot from the CD-ROM and thought it was going to work, but it said that we were trying to install XP on a partition that already had XP on it. I saw no option for full/clean restore.
View 3 Replies View RelatedI got a friends personal computer it is a dell demension 2400 it won't do anything except go to the screen with big dell letters on it.I have a soyo techaid card it came up with a code number 35 which could be initialize alternate chipset registers or is it what dell says there code 35 is cmos shutdown test in progress or bad.
View 14 Replies View RelatedTransferred all information from Dimension (Dell) to Dell XPS 410. Both computers using XP program. When I start to use my Picasa program I have a continual pop up that says " The DLL "cpuinf32.dll" can not be loaded. OS reports: The specifdied module could not be fouind. Am no computeer whiz--so this is all "Greek" to me. What should I do to correct this?
View 2 Replies View Relatedwhat is not necessary to have on and how I can turn them off I would really appreciate it.
View 6 Replies View RelatedHad to reinstall Windows XP. It appears there are issues with SP2 involving the video graphics card and the sound. Now I'm stuck. I thought that if I chose "do not use this device" under "Device usage" on the display adaptor tab, that it would pick the right adaptor.
Anyway, my screen went blank and I tried to reboot in safe mode and it sticks at mup.sys. I disabled mup and it now sticks at "nid" something or other.
I use "Windows Narrator" to try and reenable the adaptor but I think the reinstall or the SP2 killed my sound.
Is there a way to reenable VGA adaptor from the command prompt in recovery mode?
I recently ran my windows update and downloaded all necisary files but when I finally got to actually getting SP2 an so on . For some reason the firewall for it won't turn on and I've done what's told me to do but nothing I can't get it up and going
View 3 Replies View RelatedOnce again the computer impaired one comes to the table of knowledge.I shut down my PC, fans stop, lights go out. About 6-8 mins later it starts up again, been doing this for four days now. I ran a virus scan which came out clean. The only way to keep it turned off is to unplug it. The only tinkering I've done lately is to try to open a port on my router which I didn't get done, forgot password and reset button doesn't work. I don't think my PC is set to hibernate, I have never used that feature.
View 10 Replies View RelatedI've experienced the painfulness of my comp not shutting down right. I usually have to hit the button on windows about 10 times. Then I hit the one on the computer about 10 times as well. This is getting annoying and its really agitating when you think you've turned it off and when you come back its on.
View 3 Replies View RelatedMy problem with this computer is that every time the computer is turn on it freezes at any time... but then i turn it off and back on and i hit Delete and load the Fail-Safe Mode bios and save it then restart the computer it works fine... but then i cant turn off the computer because it would freeze... I have all software and bios with the latest updates but still i get the problem i have restart Windows Xp and still have the problem... I can give you guys a more details about my system if you need me to.
View 14 Replies View RelatedIs there anyway I can stop the beeper sounding when I do something wrong,such as trying to move the cursor upwards in Word pad when it's already at the top of the file. Or can I at least turn the volume down?I can't see any volume control on my newly acquired machine. Waiting for that hooter to go off is driving me nuts.
View 8 Replies View RelatedI have a Dell Lattitude C840 laptop with an Nvidia video card installed by
Dell.
Whenever I plug into a LCD projector and activate my external monitor the
dual monitor feature comes on and I cannot disable it.
Some times I want to run dual monitor with the laptop (such as for
lectures), however, sometimes I want what appears on the laptop screen to be
the same as on the projected image.
I have tried going into the Display Properties and Settings to disable the
second monitor and when I do all that happens is that I go back to only
seeing my laptop's monitor and nothing on the projector. When I activate
the external monitor the dual monitor feature kicks on again.
It never used to do this and I am not sure what changed on my system.
suggestions?