I keep getting the error message "Windows - Delayed Write Failed : Windows was unable to save all the data for the file D:$Mft. The data has been lost. This error may be caused by a failure of your computer hardware or network connection. Please try to save this file elsewhere." I'm not sure if the error is D:$Mft or C:$Mft I'll post once the error appears again. The message appears at random times, usually when the comp's idle. The computer acts totally normal after the error message occurs. I've recently jumped from 1 GB of RAM to 2 GB of RAM and I've also upgraded my boot drive from a 250GB IDE hard drive to a 250 Western Digital SATA Drive.
this has been bothering me for weeks and not a single thing I've tried has solved it. It's really a problem now, because I can't just not back my stuff up forever, I have to get this sorted out.I have a PC that I keep all my stuff on, run uTorrent on, my media center application, etc. It's got 8 HDDs. Half for storage, half for backup. 5TB overall (well less...but you know). I have an application that runs once a day to sync the drives with their counterparts. Everything was fine, until I got a new motherboard and CPU for the system.Now.....whenever I run my backups, this message will appear. Either very rapidly, or at some point during. The whole system will slow to a near halt (it can take 30 seconds for the mouse to register movement), and the only course of action is to turn the system off and on again. It's because of this Delayed Write Failed error (it pops up, sometimes immediately....and sometimes if you let the system keep running).
I've looked online for solutions. Some of them say to disable delayed write in the HDD properties. I've done that for most drives (the drives connected to the system via a PCI-E controller card have that tick box option greyed out. Nothing I've tried has made a blind bit of difference.
i have three hard drives : 1 Hitachi 250 GB Sata 2 on Nvidia Controller 2 Samsung 80 GB Sata in RAID O on Silicon Controller 1. the problem is when i boot into windows the LAN connection (two small monitors in the taskbar) takes atleast 10 minutes to show !! and theother problem is that until tht two monitors dnt appear i dnt get any reply frm right clicking any of the drives to see their properties and frm My Computer too, but as soon as the two small monitors come all the properties just pop up.
2. Sometimes suddenly in between Windows shows Write Delayed Failed Error only on the Raid Drives and i cnt access them afterwards,restarting solves the problem tho but jst for sumtime.
"Windows Delayed Write Failed Windows was unable to save all the data for the file E:$Mft"started getting this error pop in in WinXP every 10 or 15 minutes for a couple days on my desktop..i would click 'ok' and things seemed fine..however i eventually googled it cuz it's not the most attractive (comforting) mssg
How do I tell XP to write the data NOW? It is very tiresome when one goes to shut down, and watch all the drives power up to receive those last bytes of data that would be lost forever if the system crashed.Is there a setting that allows one to force XP to perform these writes at an appropriate time,e.g., BEFORE powering down a disc? Or preferably with no delayed writes whatsoever?
When I want to install certain programs, there is a set of error messages that makes the installation fail.If I push "ignore" then this message appears:
"c:Windowssystem32autoexec.nt. The system file is not suitable for running ms-dos and microsoft windows applications. Choose 'close' to terminate the application." I have a feeling that this is caused by a Norton antivirus program I installed couple years ago that I had a heck of a time removing. Could there be a chance that some parts of the program is still lingering to cause this? I've been having this problem for the longest times and threw away a bunch of software.
I uninstalled Windows Defender ages ago as soon as I realized that it had just been hogging the CPU. For some reason, an error message pops up on startup: "The application failed to initialize: 0x800106ba. The problem caused the Windows Defender service to stop. For information on how to manually start a service, see the Help and Support center."
Windows XP .I am trying desparately to enlarge my c drive, which is partitioned from a large drive also containing f (programs) and g (data) drives. I need to enlarge the c drive to allow proper cmptr operation.i used Partition magic , which seemed to work up until the point where it rebooted and gave me error 58 "unable to write to the boot sector. Virus protection software may be running. "I have disabled Norton Anti virus, and Spyware Dr (complete shutdown). Still no success.How do i disable virus protection in the boot.
Previous Attempts at booting this system have failed at checkpoint [EMem]. For help resolving this problem, please note this checkpoint and contact Dell Tech Support.Is there a way to resolve this without having to wait forever on the phone with Dells tech support?
my computer won't shutdown normally i have to pull the cable so it shut off. then when i boot up evry is good until i get this message that says (parser Message Value Creation Failed At Line 45 ) i hit okay like some 10 time finnally the logon box appers with my user name and password box i just hit okay and i get into my window evarything works fine except the bootup and shutdown?
My son went to sign onto his computer and this is the message that came up Windows/system32/command.com C:/program~1/symantec/s32evnt1.dll. An installable Virtual Device Driver failed DLL installation. Choose close to terminate application
When I try to install updates from Microsoft's site I get an error saying "Updates were not successfully installed." This happens during both manual and automatic updating. I search google.com high and low and cannot find a fix that works. This is the specific error from the WindowsUpdate.log FATAL: Error: 0x80070005. wuauclt handler: failed to spawn COM server FATAL: 0x80070005: ERROR: Remote update handler container process created (PID: 1656), but exited before signaling event
i had was my motherboard cpu fan not working in its cpu fan pin, so instead i have it hooked up to a case fan pin. I am not sure if this means i have a faulty mobo or not.
I installed my brand new Creative sound card, I installed its software and drivers all fine and the PC restarted fine. Next creative wanted to update the drivers and I let it. After it was done installling the new drivers it needed a restart. On restart I could not even get to the post screen and was displayed with an error saying USB over current, PC shutdown in 20 seconds. At first i could not get past this error at all, so i tried taking out the sound card and putting inserting it again. I did not get the USB error now and was happy.
I played Battlefield 2142 for a few hours then shut it down. Now today when i get home from work and turn it on i saw that USB over current error again and got frusterated. After taking the sound card out and putting it back in I had some new problems. I only saw my Asus Splash screen saying "press delete to enter setup" although pressing delete did nothing, it just hung on that screen.
I'm running Windows XP SP 2 and I get an error message whenever i connect my blackberry curve to the computer. if the usb device is stopped, it will go away, but other than that it won't disappear after clicking cancel. if it helps, I installed the roxio media manager only yesterday, when the error first came up. Its name is Exception Process Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6b
Every time I switch on my machine and try to connect to the internet, I get a dialogue box: Web page is unavailable while offline. To view this page, click connect. When I click connect, I can view the page and don't get the error message again until I switch off the machine. Why does this happen?
If I restart my computer (a Dell Dimension 9750) I get a flashing icon at top left of screen. None of usual keys or mouse works. In 5 minutes time it then comes to life and after a further minute or so I get normal desktop. This happens every time. I checked the MSCONFIG "Boot Ini" and it is OK. Has anyone come across this or known what is causing it ? I have tried System Restore and Registry check to no avail. I even tried the Dell restore which reverts to what you get when computer first received.
Every time I try to install SP2 either from microsoft's web site or from a copy of the actual file, i get an error message that reads "cannot read or write to the database" and the install stops. It will go through everything except installing the program (i.e. check my key, check the system, backup files etc). What would cause this and how might I fix it? I'm running XP Pro.
I have a few computers in my office that take 10 minutes to 30-45 minutes. When booting it never even gets to the logon screen, it stays at "applying computer settings" for a very long time, but does eventually allow the user to logon.
I've run a number of anti-virus programs including Kaspersky, Avira and Avast. I've used Spyware Terminator, Super Anti-Spyware and Ad-Ware. Numerous runs of these programs has not solved the problem. I have not added any new hardware or other programs (besides the spyware and anti-virus). I've tried disabling the resident antivirus program, Avast but that doesn't seem to improve the situation. I am Any ideas about how to proceed from here?
Am running XP SP2 and have had this problem for years - I think I even experienced it on my previous computer, but I'm not certain about that. Essentially, anything controlled by explorer.exe seems to experience frequent delays when I try to do simple actions. For example, clicking the Start button or the >> button to show more Quick Launch items will often take 5 to 10 seconds. Here's some detail: I click either of those buttons, and am shown the "pressed/darkened" version of them as normal. There is then a 5-10 second delay during which the button remains in the pressed/darkened state. During this time, anything related to explorer.exe does not respond - I can't click anything on the taskbar, go to the desktop, etc. I can, however still switch windows with Alt+Tab and work within the applications fine.
When the menu decides to finally show itself, it appears smoothly and as normal. Anything explorer.ext related I clicked on or tried to do during the delay is now executed (e.g. switching windows, going to the desktop). For a while (no idea on the duration, I don't use the taskbar much) following this, the taskbar will behave and respond to clicks rapidly. This problem always seems to occur after booting up - I try to launch my first application, and explorer hangs for a while... then eventually decides to respond again and let the application launch. Occurs regardless of if I wait for all harddrive activity to finish after boot. It almost feels as if explorer is being paged out into virtual memory, but that's just silly and shouldn't be necessary with 2gigs of RAM and not using anything particularly RAM hungry... There also doesn't seem to be any significant harddrive activity during the delays.
I just bought a HP Laptop Computer and it has installed in it, Works for Windows. When I try to run the word processor part it come up with this message:
"The Application Failed to start because LTKRN13N.dll was not found. Re-installing the application may fix the problem."I click [ok] and the window closes. Then another windows opens and says this: Windows cannot access one or more required files. The files may have been renamed, deleated or moved. Try re-installing Works and then starting the program again.
Each time I boot up I get the following error: "Munins32_s.exe failed to start, unable to locate component, - LEARN32.dll not found." Can someone shed some lite on this for me and show me how to correct this please? And does anyone know what this "Munins32_s.exe" file is for?
when I start my computer. The first error message I get is Application error Inicio.exc failed to initialize properly (Ox000142). The second one is APVXDWIN.exe failed to start because pavall.dll was not found Re-installing the application may fix this proble. I am running Windows XP
Turned on the computer and got an error that said, Failed to start because UMPNPMGR.DLL was not found. Re-installing the application may fix this problem. Two problems � I do not know what that file is, and the computer will not get past the error, so even if I did find the file how would I install it on the computer? My computer knowledge is only average so I am not knowledgeable enough to play with the registry. I tried to boot up in Safe Mode also, however it would not get past the error.
I posted this on another thread but I noticed that no one has posted a reply since January 2005. I thought I would start a new topic about that the problem that I keep having.I am trying to upgrade from Windows Xp Home Edition to Windows Xp Professional. When I try to install Windows Xp Professional on my computer. I continue to receive this error message at 39 minutes during setup. Fatal Error: One of the components that windows needs to continue setup could not be installed. Error: installation failed : DI386asms. Error message: Incorrect function. I have tried reformatting my hard drive, cleaning my cds and cd drive numerous times. I have reburning the copy to three other cds (all brand new). I also tried unplugging my sound and internet connection only leaving the mouse, keyboard, and monitor connected to the computer while reformatting.
Hello, I have a computer that I built by myself but I have always had a problem installing programs due to registry problems. A prime example of this is when I tried to install AVG Free antivirus.
Error: Action failed for registry value HKLMSOFTWAREMicrosoftWindowsCurrentVersionRun:AVG7_CC: creating registry value Access is denied.
I am installing Windows XP Home on a computer. I just reformatted the hard drive using the Win XP CD.Now, when it goes to install, I get an error message that says Error: SXS.DLL: Syntax error in manifest or policy file "D:I386asms6000MSFTVCRTLVCRTL.MAN on line 16.Error: Installation Failed: D:I386asms. Error Message: Data error (cyclic redundancy check).Fatal Error:One of the components that Windows needs to continue setup could not be installed.If you are installing from a CD, there might be a problem with the disc; try cleaning the disc or using another disc.
a message keeps popping up saying the following: Cannot load dialog. Error 623: The system could not find the phone book entry for this connection. All I can do is click the close button and it goes away and nothing else seems to happen, but it pops up again in a few minutes.
I have a Dell Inspirion laptop and have formated the HD and removed the partions. Have tried booting from a USB HD and have also tried another burned disk. No change will not install.
