I used the Control Panel's "User Accounts"/"Change an Account" to change my Username on XP Home without any problems. However, under Documents and Settings, the directory with all my settings still has the old Username. Can I just rename the directory to the new one I created and which is reflected as my Username on login, or will that create problems.
I am the administrator of the account and would not like to get locked out or cause other types of problems. Can someone who is familiar with this type of maneuver confirm that it is OK to just rename the directory or how to go about approaching this?
XP SP2,I changed my original factory user name, (HP_Owner), to my new name (dk), but the directory name did not change.If I manually re-name the directory, will it break XP? original user name: HP_Owner new user name.
Can anyone tell me how to modify the user profile so that the default directory for queries is located on a server. I have to create and share queries with several different users and I would like the default to be on the shared server.
I have a computer that I bought cheap that has a factory(OEM) XP Home installation on it. It has the original user name listed on the Start Menu andSystem screen. How can I change the registered name to mine? Is there a program/patch that will change the name and registry to me?
I have set up another user on my computer. They have a restricted account. But I would like to tighten it up more. When I look at the Group Policy Editor (gpedit.msc) I don't seem to be able to specify a single account. Is there another Policy editor for individuals or is there another way I can restrict what a person can do?
I'm running XP Pro, I have the admin account - I'd like to know is there any way of changing the startup programs for limited users? I have a program I want to run at startup in my admin account, but I don't want it to start for any limited users when they login.I tried going into the limited account and running msconfig, but obviously this is disabled in limited accounts so no joy there.
We've just purchased a new monitor for out PC with a better resolution than our previous one. Basically, my dad wants to have his user account set at 1280x768, whereas I want to use the best resolution of the monitor which is 1440x900.
On the previous monitor, I seemed to be able to make it so that different user accounts could have their own resolutions. However, when I've tried changing the resolution in my dad's account, when I go back to my account, it is set as my dad's resolution. If I change it back to mine, then my dad's account changes to mine too.
Is there a way I can make it so that each account can have their own resolution set?
installed a file manager for his mobile phone and it's put a folder on the desktop which I cannot seem to remove. I right click it but there is no delete option for it. Even when I open it, I can't find any options to remove it either. Does any one have any idea as to how I might be able to remove this folder from my desktop? It's appeared on all user accounts
I am trying to fix a friends computer my usual story. Once it gets to the user screen for user selection both keyboard and mouse stop working, its either they stop working or the computer freezes, i am not sure. Life still goes to the mouse as it still lights. The keyboad works fine in the bios but not at freezing point.
For security reasons, Microsoft does not allow parents (computer administrators) to check on, maintain, adjust or otherwise enter their kids' (limited users) XP profiles without either resetting their passwords or waiting for them to come home and being confrontational about it.Ideally I would like to be able to log on to a limited user account from my administrator account without tampering with anyone's passwords-resetting them or otherwise. Actually, I have little interest in the (step) kids' personal life and stuff. Alternately, perhaps you may help me with my ultimate goal: limiting screensaver activity:
as soon as i log in instead of welcome screen to choose logins i go to a dialog box where i have to give my password and usernam... i tried to change this by going to control panel and user accounts. as soon as i clicked on "change the way user logs in or logs off" i get a error as 'A recently installed program has disabled the welcome screen and fast user switching . to restore these features , you must uninstall the program. the following name might help you identify the program that made the change - KLGina.dll"
so i tried to delete i couldnt ... eventually it got deleted by software "unlocker" but as i log in again an error as "please contact system administrator as klgina.dll is missing'.. i got that back again by system restore..
what i want to accomplish is to set an user account type automatically after creating one. as you may know, when you create an user account the system ask you what account type to apply for that new user. the default choice are: Administrator and Limited. i want to create an account that is not too limited but neighter with same privilege as an administrator. i went to the Local Users and Groups at the Microsoft Management Console (now on MMC) and assigned a different Group to each users i desired. task accomplished. but...
the problem is that i don't know how many user the computer will have. the owner of the computer are primitive human that don't know how to configure the system. i neighter want any of them to have administrative right because they have internet access and they still on the experiment process. meaning that they're propense to click 'YES' to any message even if those are viruses (most of them don't read english). the solution i thought was to assign only one user the administrative right so they can install and uninstall software and perform other administrative task as creating more user accounts. there is anyway that after creating an user account the system automatically assign the user a specific Groups? for example the built-in object Power User. or among the choice on user account tool add an new item or modify the existing items. or if there is anyway to modify the privilege and right for an built-in object Group. the Limited account pertain to the User Group, so instead of automatically assign other group, the new account inherit the privilage/right/limitation from the default group.
Operating system: XP home.When creating a user account for my husband with limited access, I lost my user account as administrator. My guest account has also disappeared. I cannot download or do anything because of the limited access that my husband has. How do I get back/show my user account with administrator access?
I'm going to create 30+ user accounts. They will be all running at the same time, running the same program. (the only way I've figured out how to dual-boot the same program) and I was wondering... Is there anyway to make it somehow use less resources doing so? Like, so far I've gone into Advanced > Performance and killed the switch on everything. I was just wondering, after days of running non-stop, it is bound to start eating up RAM or even cache to much, right? If so, what can I do to stretch the time this happens in? What else can I switch off/disable for each user to eat up less resources?
Does one group take precedence over the other. I had a situation where the user's accoutn was in both groups but when trying to install software,it appeared as if he did not have enough privileges. One of my technicians signed in as administrator and was able to install the software without a problem. When he signed in as the user who was in both Power Users and Admins, he said the install did not work. So the general question is how does Windows decide how to apply group membership roles.
I am having some issues with trying to share files on my home network.My first questions is,are the names listed in user accounts, (in the control panel under user accounts) have to be the same as user profiles listed under my computer in order to share files on my home network?
In recently restoring my crashed machine, I noticed that when the machine was idle, it would go back to the user login screen. I found this tedious as I just wanted it to go to screen saver but stay within the user session. I ran 'control userpasswords2' and de-clicked 'Users must enter a user name and password to use this computer.' (It's a home computer so not worried). Now when I reboot, it brings up a Windows login for Administrator and says, "Unable to log you on because of an account restriction." I can bypass that and log in as Owner or anybody else so it's more cosmetic than anything else.Question - who is this "Administrator?" The account doesn't show up under User Accounts. 'Owner' is the Administrator. Do I care about this account (which appears to be hidden? Should I allow it to log in under the covers? If so, do I have to re-click 'Users must enter a user name and password, etc."
I've got a hand-me-down laptop that I inherited from my dad (IBM Thinkpad 600X), which is running Windows XP Home Edition. I never cease to be amazed at what sort of weird configurations my dad managed to get in place, or how much time it takes to undo some of these configurations now that the laptop has been handed down.
The title sums up my problem pretty well. I used to have a problem with switching user, my computer didn't respond after clicking 'switch user.' I searched for a thread about that problem on this site and solved it instantly. However, after switching user, the computer now returns back to the Windows XP main log-on screen as it's supposed to, but when trying to log onto a different user, the computer almost refreshes the screen and comes straight back to the log-on screen. The only user that has access to the computer at this point is the user that switched user originally.
Current situation: When Windows XP boots it displays Windows logo, black screen and then a small error window with title "User Interface Failure" and text "The logon user interface dll msgina.dll failed to load. Contact your system administrator ..." There is a button to restart the system. Booting causes a loop back to the same state; I cannot get the system to boot to safe mode. Other than the lack of a logon and desktop the rest of the boot process seems to continue OK; I can access network shared drives from another system. Using BartPE I can see that msgina.dll is in C:windowssystem32 as it should be. Unfortunately much of the data I need to access for my work is not on shared drives and cannot be accessed by BartPE so I am in big trouble. Background: The express version of SpyCatcher was installed a few daus ago. All was OK until I restarted the system and arrived at the current situation. I also have BartPE which I have used to look at the SpyCatcher logs and found entries that msgina.dll was quarantined (along with many other safe items). I believe this is the cause of the problem and not anything else.
I have a corrupt user profile. A program would not work (Avery DesignPro 3.5) and their support told me to create a new user profile.I did, and the program works under the new profile. The problem is that nothing that I use all the time is under the new profile. How can I uncorrupt my regular user profile, or do I need to switch back and forth when I want to use that program?
I had a user account, However, for some reason, I have done something wrong and reboot the machine, that user account had gone, only Administrator is left. Then I created an account with the same name: John Smith. I noted under the Documents and Settings, there are 2 John Smith, they are: 1)John Smith and 2)John Smith.JS I think the first one is the original one because the date modified was a couple of months ago. The second one is the one that I just created.Can I recover my original one ?
I wanted to protect my documents on my laptop with a password, and I used ''the easy way'' of protecting it from within my XP user account (I used the built in documents password protection, found in the account mangement menu in the control panel). everything was fine until I've restarted the computer. I got (and still getting) the following message: ''The system could not log you on.
In XP Home, multiple users are supposed to be able to log on at the same time. That used to work for us fine. Now, a second user can no longer log on. Sometimes, I see an error message blaming winlogon.exe, but usually, the system just crashes. Curiously, there are no errors in the Event Viewer.
I have Windows XP Home and i want to delete a user account and i have been unsuccessful . Everytime i go into "control panel/user accounts" and try to "Delete account", it just sits there with the hourglass and then when I try to get out of it it says that the "program is not responding".
I'm running XP-Pro, ACT 2006 and Goldmine 6.0 databases. Whenever I need to sign on with my user name first and last name then enter a password to access secure websites the last name of my user name changes to a series of letters with no meaning and then I am denied access to the sight. This also happens when I want to enter my "Signature" at the end of an email
I'm having a problem on my parents' computer. They each have a separate user profile, but for some reason flash player only works on Internet Explorer on one of them. What could cause this and are there any possible solutions?
I bought a copy of the above online to overwrite my French version of XP. I see, however, that it is intended for PC server manufacturers and assemblers ONLY. Does this mean I cannot use the disk to overwrite my software? I'm reluctant to try it without advice. Unfortunately, my husband broke the seal on the package when it arrived so presumably I can't exchange it if necessary.
