I'm looking to upgrade my video card, but I need to find out what watt my power supply is. It is a Sony Vaio Model # PCV-7752, although when i try and locate the model at www.sony.com It is not listed. I open up my computer sliding off my side panel, yet there is no wattage listed there either. Any suggestions as to how i can figure out what my wattage is?
View 14 Replies
My PC has old configuration, the Max Power Supply can be only up to 350W. You know that every parts of the PC, either external or internal hardware will consume power. What I would like to know is that, what would happen to my PC if the total power consumption exceeds the MAXIMUM VALUE of the power supply unit.
The Memory has been tested by PCClub and has passed the test this memory is new and fresh so nothing is wrong with the memory.What im thinking is that its the power supply because i didn't get the Power Supply my friend got the power supply at the Thirft Store (the name of it is what it is Thirft Store) now i didnt think it was messed up because it was in package and all wraped.I have some pictures but NOTE: The Pictures are when i was useing the CPU from a Compaq Presario so dont pay anything to that.
View 16 Replies View RelatedCan i rebuild with a different power supply, and even into a new case with all the other bits i have?? or do i need to start from scratch. I ask about the new case, as i'm in desperate need of more drive space (cd/dvd etc)
View 9 Replies View Relatedcomputer for a few days you would press the start button on the tower and it wouldn't start right away but then after a few sec would come on. Yester day I tried it twice I pressed the start button on the tower and you could hear the power supply try to start but would die and the computer would not come on. so about the thired time press the button and nothing, would even try to start. I figured it was the power supply. I put a tester on the power supplyh and it said it was bad, so I bought a brand new one put it in and it still would n't do anything just dead.I tested the new one and my tester sasid it was bad, I changed it for another one and the store I bought the 1st one from tested the 1st one and there tester showed it was good, so my tester must not be working.
View 5 Replies View RelatedIs there a tool/equipment so I can check if the power supply is blown or can any tech store check it out for me.
View 5 Replies View RelatedI brought a 400watt power supply from eBay it has the sticker on the side that lists the power but i want to make sure that it can actually give 400watts because i know that it isn't too hard to change the sticker or change the case and replace the internals with the internals of a 250-300 watt PSU are there any tools that i can use to check if the power supply can give 400 watts? it is a PSU made by ultra.
View 1 Replies View RelatedI have been using a "Raidmax RD-350W" power supply with a 20-pin connector to the motherboard. When i bought a new power supply it had a 24-pin connector to the motherboard. Here are a few questions since I know nothing about PSs. 1. Is there a designation (besides just manufacture preference) between 20 & 24-pin connectors to the motherboard (i.e. Pentium vs. AMD.I use AMD)? 2. Can I just buy a connector from the 24-pin connector from the PS to the 20-pin connector on my motherboard and not adversely affect my computer's power.
View 6 Replies View RelatedI last night I turned off my computer for the night and this morning it wouldn't turn on. I checked the power cord and the power strip and everything looks fine. It looks like I have to replace the power supply unless someone has other suggestions. My question is, since I may have to replace my power supply, is it safe to replace it with one that is more than twice the wattage of the one that's in there now.
View 3 Replies View RelatedBack up Hard Drive into mine as he wanted to reformat and install OS. back up successfull, i took his hdd and put it back on his own motherboard to format and install an OS. As i on the switch, a burnt smell from the power supply reached my nose. the pc did not start at all.My PC's power supply is 450watt and my frend's PC's power supply that was burnt was 350 watt. Why did the power supply burn?
View 3 Replies View RelatedI recently put together a new computer. I have used it for about a week now, today I got home and my computer won't turn on. I am guessing bad power supply but wanted to check if it might be something else.
The mother board that I have is a Biostar K8NHA GRAND Socket 754 ATX Motherboard, DDR400, 1394, SATA RAID, 6ch Audio & GB LAN
The best solution to most issues with looping is POWER SUPPLY. Due to the huge amount of resources that video cards, sound cards, larger cpu's, they suck your power supply to the point that application cant perform. In turn it causes lockup, reboot and boot to desk top.A lot of resellers are only slapping in a 300watt power supply in newer systems. That doesn't work, you need at least a 400watt or greater. You need at least 450watt POWER SUPPLY. Take my word on it.This is the biggest issue i have studied on the net and in my lab for 1 1/2 years now. So many people have taken components back to the stores had them tested, to find out there is nothing wrong with them and go around shaking there heads in wonderment, without even considering power supply.
View 9 Replies View RelatedI have just upgraded one of my old Windows 98SE computers to XP Pro. The installation went well.But, for some reason now after I shutdown the computer in order for me to turn it back on I have to unplug it from the power supply and then plug it back in. Before i upgraded the computer I was already having a shutdown problem with Windows 98SE.Every time that I would shutdown, it would restart on its own.I tried to trouble shoot the problem.I even downloaded a patch from the Microsoft Website but it still didn't work.So i figured if i upgraded it to XP it would solve the problem, but I ended up with a different problem.
View 2 Replies View RelatedI have a problem I have a new system installed Windows XP professional. Everything was ok till yesterday. I just have a few more things to install and I have the computer plugged into the 4 plug UPS so if the power goes down the computer has 5 minutes to shut down. Well the hydro went off yesterday for a few seconds and all of the other computers came back up but the new one. It was booting into Windows got to the Windows logo and the bar going across loading then after 10 minutes still sat there. I decided to re-boot to see what was wrong as I am a computer tech. Nothing so I went into safe mode that was fine got out of there same thing logo looks like it was starting nothing. I did put in the Windows XP disk thinking to just do a repair still the same thing. I get the Windows screen like it is loading nothing. Go back to safe mode and here is what it says and there is no disk at all in the drive. Can not run setup from Safe Mode rebooting computer.
View 14 Replies View RelatedThis is an IBM think center with XP Pro. Symptons are random shutdowns and restarts, and constant freezeups. I checked the power supply and it smelled like it was burnt so I changed it. I replaced the HD with a new 40 gig Hard Disk and when I went to load OS it got as far as "checking system configuration and then it freezes. I cant format or reload OS.
View 4 Replies View RelatedI recently purchased a new graphics card (name in the title) and I installed it and I got an error at startup explaining that I did not have sufficient power supply so it lowered the power of the card.. it said something about adding power cords(that came with the card) but I don't know where or how to put them in
View 6 Replies View Relatedi use my geforce 8800 gts with a 450watts power supply wich do have only 4 pin connector instead of six. or shuld i wait till i get a power supply with a six pin. will i not damage the card if i try to use the 4 pin connector with this card?
View 9 Replies View RelatedI have a question regarding my PC and some problems that I have been experiencing, which I think are related to my power supply.
First off, my PC will not recognize my iPod Shuffle. When I first purchased the Shuffle, everything worked fine, however one day when I went to plug it into my USB port, nothing happened and the orange light on the iPod flashed. I tried all the USB ports, including the ones on the back of the machine to no avail. This is not a problem on other people's machines, where XP is able to recognize the external device.
Also, whenever I go to shut down my computer, the light on the front of the tower is on and the fan is running. It is like the computer is not even shut down. I have to manually turn off the power strip everytime I want to shut my computer off. Also, "Stand by" is not an option on the XP menu.
I've been told this is a power supply issue. Anyone have any other ideas?
Desktop Manager allows you to switch between multiple desktops creating more elbow room for those who like to stay organized while pushing the max thread limit.1. First grab XP PowerToys from microsoft.com Once installed right click then check: task bar > toolbars > Desktop ManagerYou may now view up to four new desktops. I prefer not to have "Shared Desktops" on as it reminds me more of linux (and is cleaner).Now you may hide the buttons etc. and use Windows key + 1-4 to switch between desktops and Windows key + v to preview.
View 9 Replies View RelatedI'm running WinXP pro and have lost all the reguler power schemes from the power options propreties window. Also I'm unable to Save a new scheme.I beleive the schemes where deleted from the power properties window by right clicking and selecting delete. They used to be there anyway Unknown is listed above Turn off monitor-Turn off hard disks-System standby-System hibernates and everything is greyed out. They are still listed in the registry but with no value set.How do I go about getting the schemes back?
View 5 Replies View RelatedWhen I start System Information (msinfo32.msc) it gives me, in the info panel, the following message: Can't collect information Cannot access the Windows Management Informationsoftware. Windows Mangement files might be moved or missing. I checked if the WMI service is not disabled (it is automatically started, the default).In Microsoft Mangement Console, under Services and Application, I have WMI Control. R-click, properties, and: Failed to connect to <local computer> because "Interface: class not registered"
I have an IBM NetVista running XP that at shutdown will close windows but will not power off machine, user has to hold power button to power off.
View 1 Replies View RelatedI had a problem with my electric supply, transformer shut down and my desktop was on. I have an old voltage regulator, not an UPS type. My pc was loading win xp back then, now whenever I fire up my pc it shows the - start winxp normallyuse last working confsafe mode - black screen.
View 13 Replies View RelatedI had an ELECTRIC POWER FAILURE during the start of Windows 2000 Professional this morning. After it, when I try to restart my computer, it begins to load Windows, but I receive the famous blue screen. The error code is:
STOP: 0x0000007B (0x8243D030, 0xC0000006, 0x00000000, 0x00000000)
INACCESSIBLE_BOOT_DEVICE
I tried with F8 (last valid configuration, etc of the list), but all give the same blue screen. My repair floppy disk is from september 2007. After it, I installed a second HD for files backup and needed to put drivers for Windows recognize the bigger HD size. All worked fine until the power failure this morning. Antivirus and scan are up to date. Since I installed the driver for the bigger size HD, I cannot more boot through the floppy disk, because it not recognizes the HD. Is there anything I can do to not reinstall Windows?
After I boot the system and go to the desktop, I get the following message: "Unable to locate language DLL - languagesEnglish.dll"
View 3 Replies View RelatedI wasn't sure where to post this, but I tried to run one of my games today, and I got a pop-up saying that:
Frozen Throne was unable to locate your CD-ROM drive.Please make sure your Frozen Throne disc is in your CD-ROM drive, then click on 'Retry'.I have never gotten this error before, so I right clicked on My Computer > Properties > Hardware > Device Manager. Then under DVD/CD ROM drives is has: Next to these names there is an icon which has an exclamation point. I right clicked on ASUS CD-S480/A5 , then properties and the device status says: Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41).I am not sure what this exactly means, but I cannot load any of my games.
I have bought a web cam and it uses usb but when I load on the program I get this message Setup is unable to locate working USB port on this system. Require working USB port to continue installation. I have gone to the control panel, Hardware and then to Device manager. When I look in there for the Universal Serial Bus controllers there is nothing there even though I have 2 USB ports on the computer and where going approx 2 yrs ago when I had my old web cam. If you are able to help can you please let me know what I need to do to locate what I need to get it going.
View 3 Replies View Related0x0000007E 0x00000005 0x00000000 0xAFC4FBB8 0xAFC4F8B4 this was the whole message before the dump. The system in question is using xp sp3 I've searched the last 2 in the list, even on the microsoft site and I get nothing.
View 7 Replies View RelatedI have a ton of background pictures that I really like, but I cannot seem to locate them. I searched my computer for the file names, but nothing comes up.
View 9 Replies View RelatedWhen attempting to open a JPEG in Windows picture and Fax viewer I get an error that the program is unable to locate gdiplus.dll, recommends reinstalling the application. After searching the PC I can see that it is installed 4 times in various locations.I also get this error when attempting to launch windows media player.
Recently I have been performing a clean up of my PC (With guidance of TSG Security Forum) due to spyware infections. Part of this included running Ewido security suite. I noticed that there is a file at location c:ewidogdiplus.dll.
I'm having some problems with my XP pro Dell computer. Recently my brother downloaded some songs off of Limewire ( I know it's really bad). I have AVG free installed and it detected multiple viruses as mshypiw.dll I prompted to remove them, and it warned my system may become unstable or crash, I still clicked to remove them and after a re-boot my computer opened up to an error.winlogon.exe - Unable To Locate Component.This application failed to start because mshypiw.dll was not found. Re-installing the application may fix this problem.After I click OK it gives me the same error over and over again for different .exe files. Ex: lsass.exe, Services.exe.It Then opens the logon to windows screen and I can login as normal. Then it gives me many more of the same errors, which if I enter through all of them, I can eventually get to the desktop. Then, if I try to run any program I get more of this same error, depending on which program I try to open, some will open and some will not.
I have googled for this error for hours on end and can't find an answer. I did find this KB article http://support.microsoft.com/kb/319114. Which seams to relate to my problem but the file framedyn.dll is not in my dllcache folder and I cannot get to my System setteing because of this error.
