My 60Gb hard drive is seperated into 2 partitions:
C:/ 10Gb
D:/ 50Gb
And the C partition where windows is installed is almost full. The problem is, I try to put as little as possible to it, but it still eventually fills up. 200mb only left now.I'd like an advice on how should I clean it up, I'd delete anything that's unnecessary, but I'm not sure what those are.
How do I make the second partition, which includes all files from another hard drive, pretend that it is the main partition? I want to simulate the second partition being my main one for a while.
OR
How do I resize system partitions?
I have my Windows format disc and I want to create another partition with it. I tried to create one, but it said something like "You have no more space to create another partition because you used up all your space on your Windows primary partition". See, when I reformatted my computer a while back I just created 1 partition for Windows and applied all the space onto that partition.
If there is a way I could remove some space off of my Windows primary partition and create another partition with the space I removed. I want to do this so I can put general things in my other partition such as documents, music, etc. and just leave the other partition for Windows and programs.
What are the steps needed to access one of my partitions, delete it, then use 1/2 the space and apply to system drive and the other 1/2 to another partition?
View 5 Replies View RelatedI bought a new computer.It appears to have been partitioned into a NTFS format and FAT32 format.The default drive for my documents & my pictures etc is the NTFS which I have been using happily. It is Media Centre Edition so I also have a few large files (>4GB) - though I dont keep them long term.NTFS partition has fulled up - but I cant move my large files to other partition to free up space
I've done a little bit of reading but my question is "Should I reformat the FAT32 to make it more of use to me?".I cant really see the need arising to access older OS files, except .JPG's (photo's I had on my old Windows ME Comp) or "Should I move all my smaller files (documents and photo's) to the FAT32 partition and use the NTFS drive for the bigger files?"
My hard disk arrangement is C(primary partition FAT32)for Windows XP
D(extended logical FAT32) for non-os data (movies, pictures etc..)
F(primary NTFS) for Vista..
I am formatting F: and then C: through XP installation CD
(and C->NTFS from FAT32)
is this ok???
will D: be accessible after installing XP on C???
I would like to know if it´s possible to take free space from an extended partition and redistribute it to a primary partition using partition magic 8.0..both partitions are NTFS
View 1 Replies View RelatedNow I am having multiple new problems. I want to completely erase the hard drive and install a new version of XP Home, not Pro. At the beginning of the installation process, it gathers system info. Immediately it responds with "no valid system partition" and the only option is to exit from the process. How can I get past this to complete the installation?
View 14 Replies View RelatedMy existing C: drive. First I was getting the "Error 983" error. Then I un-installed SP2 which was causing a gang of problems, freezing programs for a couple mins mostly. After I got it uninstalled I did a disk defrag, then a chkdsk /f. Now I have partitioned the drive using PM8 again and this time after the reboot it is telling me it is completed but once Windows XP reboots there is no new partition.
Im trying to install Suse Linux 9.0. But I really want to have 2 new partitions, one for Suse, and the other as a back up.
what are the steps to create partition using Paragon Manager?
View 1 Replies View RelatedI had perfectly working PC with XP Pro installed on a 160Gb Maxtor HDD.For no reason I error checked the hard drive, which the system did after rebooting, at the end of the test the system rebooted and announced that there was a error on the boot and boot.ini.Useing XP Emergency (on disk) I tried fixmbr which did nothing then I tried Fixboot. XP found the drive identified it as FAT and said that it was successfully fixed.The drive was FAT and is now unusable.Partition Magic sees it as a FAT drive as does XP when I switched the HDD into another machine.
View 4 Replies View Relatedi plan to format my computer again and this time i plan to split my primary partition before i format. When i go to format i want to format only the active partition with windows in it.I have two questions. This trick does work right? the partition i created in windows using magic partition 8 won't be formated along with the active partition right? I plan to backup everything on my second partition.When i created the second partition i had two options. to either make it a logical partition or a primary partition. I chose primary partition. would that work?i plan to install windows xp pro sp2.
View 8 Replies View RelatedOver a year ago when I setup my new system and before installing most of my APPS, I backed it up to a small HD. My Win Xp Pro MCE 2004 has become a little buggy (MY FAULT).How would I copy or clone the smaller HD over to my 80GB drive AND maintain the larger partitions? I have Ghost 2003 but I'm not sure if it permits me to set the partition size when copying HD's.
View 6 Replies View RelatedI reinstalled my OS several months ago, and decided that I might want a dual boot in the future. I already had an old, smaller drive in the machine that's labeled the c: drive.
Reading one time that for security purposes it's good to have your OS on a drive other than C:, I decided to not alter the drive lettering.
I then partitioned a new internal hard drive into several logical drives. I formatted the D: partition as a Dos fat32 partition and the rest as NFTS partitions. Somehow, I allowed the D: partition to be the primary partition, while the E: partition which contains the Win 2000 Pro OS Winnt directory is a logical drive.
When I just checked disk management, I noticed that not only is boot.ini on the D: Dos partition, but so is ntldr along with the following Dos setup files:
ndetect.com
arcsetup.exe
arcldr.exe
I'm running Xp Pro SP2 & I need to redo the system. I have 2 Samsung 80gb hard drives but only one is currently in use.
What would be the best way to set them up for system speed, reliability & ease of back ups?
What sort of partitioning software do people have experience with ?
To reformat my computer now and i downloaded all the files i'd need to reformat and compressed them into a single rar file to put onto my d drive.
Although when i go to move theses filesonto my d drive i get a message saying: cannot copy "reformatfiles": There is not enough free disk space
Delete one or more files to free disk space, and then try again
Free space on this drive by deleteting old or unnecessary diles click disk cleanup.
I've just resized a partition on my main physical drive, and the OS sees the adjacent partition as unfromatted.
I'm using Partition magic pro 7 and WinXp pro.
The partition I resized is the primary OS partition which is formatted as NTFS, the adjacent partition is FAT32. How can I get XP to recognise the FAT32 partition again?
I decided to try Linux. 'Ubuntu' was my type selection. After trying by running off a CD I then decided that I would pick up some partitioning software like 'Partition Magic' or some software along that line to do the partition. But somewhere(s) I read that virtual or software partitions are less then a good idea for reasons I don't recall at the moment.
Is that true? If so, why and/or to what extent?
Is it possible to recover data from an external HD that I accidently deleted the partition and created a new one I just got a "new" computer - it's actualy a hand-me-down that I was trying to do a clean install of Windows XP on. I booted it up with the XP disk in the CD drive, and thought I was telling it to delete the existing partition and create a new one on the C: drive, but I didn't realize that it was also recognizing the external drive, which was already plugged into a USB port (why I even went ahead and plugged it in I don't know - that was stupid mistake It was the first one listed, and I thought it was telling me that there were two partitions on the internal drive, not two drives I also didn't pay attention to the size it was telling me the drive was (stupid mistake #2), I just told it to create a partition with the maximum possible size
View 4 Replies View RelatedI am having a partition problem I am having a machine with only one active partition i want to creat one more for the backup purpose
View 1 Replies View Relatedwhen i open Partition Magic 8 i see my Maxtor 6Y120P0 drive in a yellow color and the file system marked as "other": but my Windows 2000 Disk Management shows healty:
under windows i can read and write to the partition, so what is wrong? what does Partition Magic wants?
all I need to get my computer, as it was when i bought it it is windows xp.
View 2 Replies View RelatedCould you take a peek at this log and let me know if it is clean?
Am trying to clean out cookies, when done I get an index file that says there are 160kb in file that I cannot access.How do I access these to see what is there? It also says another program is usin this file and that I cannot access the file.
View 4 Replies View RelatedI bought 2 SATA HDDs and would like to set them up as RAID and clean install XP and all the drivers/programs on them. I don't want to use those image drive programs to transfer the old drive to the new drive. My old HDD has XP on it (activated) and I would like to format it and use it for data storage later. Do I need to reactivate after I clean install XP on the new HDDs (same mobo and CPU)? I have NOT plugged the HDDs in my computer yet.
View 4 Replies View RelatedI am going to try to do a clean install of XP. When i am ready to get my updates do i download all of them at once then reboot or do i have to get one at a time and reboot after each one?
View 4 Replies View Relatedwhat drivers will I need? ..I have most of the stuff but some of the disks were for my winme OS I think. How do I find out what motherboard I have and what driver I need?if it all goes pear shaped will I be able to put my old master in and get back to square one?if it the Xp install goes fine can I put in my old master as slave and copy the needed files over to the new master? The old master is fat32, so would that be a problem?I only have the winme version of word but my dads laptop has word perfect for xp...could I use this?
View 4 Replies View RelatedWhat would be the easiest way to do a clean re-install of Windows XP without the manufacturer's CD?
View 2 Replies View RelatedDid Not Find The Reply To My Message Asking Which Blocks To Check To Do A Disk Clean Up Although I Know There Was A Reply.
View 3 Replies View RelatedI have finnaly decided to enter the world of high speed internet (wait for appluse) and before I do this I want to optomize my computers preformence so I have Checked the hard drive for errors and defragmented it when I try to use the Disk Clean Up tool that comes with XP it asks what drive i want to check then I click the main drive and I get this error:"Disk Cleanup Manager for Windows has encounterd a problem and needs to close. We are sorry for the inconvenience"I looked it up and did not find any thing that lead me to belive that it was a common error Is there anyway that I can reinstall it or another way to run it? Also if anyone has any advice on speeding up my computer let me know.
View 4 Replies View RelatedI have been preparing all week for a clean install of XP this weekend. The only question I still can not find an answer to is whether or not I can get the SP2 from windows update after I have reinstalled XP I purchased prior to SP2, in August 2003. I recall reading somewhere that it was not available after a certain date. I would like to confirm I can get all the neccessary updates from microsoft's website after I have reinstalled.
View 5 Replies View Related