I am presently using TuneUp Utilities 2006 but after about 4 years of installing and uninstalling many programs, my computer runs like a "slug". The TuneUp Utlitiities 2006 has help but the computer is still ridiculously slow.
View 6 Replieswhat should i use i ran tuneup manager and its says my processor is good enough for x 64 windowz should i switch over i have a amd turnion 64 x2
View 3 Replies View RelatedMy computer automatically ran a PC tune-up and froze the screen afterwards. I cannot reboot the system ever since.
View 1 Replies View RelatedOn my box at home, I have Norton System Works, which contains a registry diagnostic/sweeper.At work, where I run Windows 2000 Pro, I was wondering...I know there are various registry diagnostic & cleaner utilities out there on the web, but I thought I had heard that Windows itself either includes one on the OS disc or makes one available for download.Is there such a thing as an official Windows Registry utility?
View 8 Replies View RelatedFor those of you who love Microsoft power tools, but hate the new bulky task switcher here is the fix.1.Run the msconfig2.Select the start up tab3.Un check the taskswitch.exe check box4.Click apply then ok then reboot5.Next time you use the alt tab utility will be back to normal.
View 9 Replies View RelatedI just got an assignment. One question asking what is utility program,can I ask what is that? Can anybody give me some examples?
View 7 Replies View RelatedI am unable to use the ping.exe utility in Windows XP. i need this to check my connectivity with my ISP and other network peers. as soon as i try to ping ANYTHING(even the localhost) it hangs. the details from event viwer r as below:
Event Type:Error
Event Source:Application Error
Event Category:None
Event ID: 1000
Date:11/9/2006
Time:3:17:01 PM
User:N/A
Computer:XPWORKSTATION
Description:
Faulting application ping.exe, version 5.1.2600.2180, faulting module unknown, version 0.0.0.0, fault address 0x00000000.
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 41 70 70 6c 69 63 61 74 Applicat
0008: 69 6f 6e 20 46 61 69 6c ion Fail
0010: 75 72 65 20 20 70 69 6e ure pin
0018: 67 2e 65 78 65 20 35 2e g.exe 5.
0020: 31 2e 32 36 30 30 2e 32 1.2600.2
0028: 31 38 30 20 69 6e 20 75 180 in u
0030: 6e 6b 6e 6f 77 6e 20 30 nknown 0
0038: 2e 30 2e 30 2e 30 20 61 .0.0.0 a
0040: 74 20 6f 66 66 73 65 74 t offset
0048: 20 30 30 30 30 30 30 30 0000000
0050: 30 0d 0a 0..
==========================
i tried to run it under SAFE mode in case some app might be restricting it from functioning but to no use i even replaced the utility with the original one from my installation disk but even that didn't work out.
but it seems theres some problem with the utility itself because i downloaded a 3rd party pinging utility and it worked just fine!
note: i have tested my firewall and antivirus options..they r not interfering.
When booting up, the Sys Config Util comes up with the usual canned statement. He has not made any changes. Clicks Don't show this again then clicks OK. Reboots and again it comes up. He is the only user and administrator.
View 12 Replies View RelatedI've been wondering about this for a long time, but is there something like the dell diagnostic utility on other winxp systems other than dells?
View 4 Replies View RelatedHow can I direct the backup utility to use the CD-Rewritable Drive rather than the Floppy Drive?
View 2 Replies View RelatedI've been ransacking XP for a backup utility, but apparently they didn't include it on the XP that came with my computer. Do I have to buy this capability? I've been a Windows user since 3.1 (remember?), and all previous versions had this utility included.
View 2 Replies View RelatedI used windows backup, all programs>accessories>system tools>backup, and made a complete copy of my system. How to load these files up without loging on?
View 6 Replies View RelatedHave tried for months to get my backup utility to allow me to make a backup of my system and it Will not allow me to do so.Still unable to use the backup utility, it gives me a specific message. The backup file name could not be used."E:2505.bkf" Please ensure it is a valid path, and that you have sufficient access.I have tried other names for the file and none has ever worked, I have tried this since the backup utility was installed, I also uninstalled the utility and reinstalled it, made no difference.I could use some suggestions on how to get this utility to work.I have installed this utility twice, from the addons disc for the Xp operating system disc that came with my Compaq.
View 14 Replies View RelatedI have a Dell Inspiron 1200! Before whenever I wanted to do a manufacturer restore (make it brand new like) I pressed CTRL+F11 and it would start a program by Symantec! A restore program! It would restore my computer to totaly brand new state. Like I just took it out of the box! Now I need to make it brand new like again, and me pressing CTRL+F11 does not start it no more! Skips it, like I never pressed it! I need to do a restore again and I can't! how to get it back up? How to make it work? Anybody knows exactly what do I need to do? May be some other program I can load up?
View 5 Replies View RelatedSystem Configuration Utility, Startup, dumprep 0 -k %systemroot%system32dumprep
View 9 Replies View RelatedDoes Window XP have a file compressor/unziper built in to the OS?
View 6 Replies View Relatedwhen I went to MISCONFIG/System Config Utility, under the startup items, there are a lot of items, but few, if any, of the items I, in fact, have in my startup. My items still startup when I boot, but the list is not in Sys Conf Utility!
What happened to them? How do I get my working startup items bacK? I recently installed Process Explorer, a program which I found of no use to me. I have uninstalled it, and still the problem persists.
In my "services" tab in my "system configuration utility" accessed via 'msconfig', I count about 75 entries all of them checked. Now, I know there a some of them that I need. example: "AVG Update Service". But there are many most, in fact that I haven't a clue about what they do or if I really need them. For example: "Cryptographic Services". What in hell is that? What I'd like to do is disable all the stuff that I don't really need, so that I'm not wasting resources. Thanks for any help anybody can give. If you really come through, another donation will be on the way
View 4 Replies View RelatedAs part of my monthly maintenance checks I ran Disk Clean up and it took so long to complete that it was almost like a drive-defrag. I had to cancel out of it at least once I try it in safe mode because I was sure it was hanging. Only it wasn't hanging, just running slow. The part that took forever was NOT the pre part where it estimates how much space you can free on the disk. That was done in a few minutes. It was when running Disk Clean up and it was doing the "Compress Old Files" part. It took at least 45 minutes. When I went into Safe Mode, as part of Disk Clean Up, I check something that I think was called "Temporary Index File Searching." that I did not see before in Normal Mode. Why would Disk Clean Up take 3-5 times longer to complete than usual?
View 6 Replies View RelatedJust clean installed XP for the 3rd flippin time in 4 months. Before I load any programs onto the PC. I would welcome any advise as to recovery programs, utility and back up programs etc. that would be a help down the road in case of trouble. Also a recommendation for a good AV program. I used the free Grisoft AVG program last time around and it created some conflicts for me. I also have a firelight 40 g external HD I can use.
View 2 Replies View RelatedI am having some problems with a Asus A7V266-E. It recently had a new hard drive put in and after that it froze and whouldn't even show anything on the moniter. Since then I have reset the CDCTRL or something beside the motherboard battery. I have gotten the bios to recognize the hard drive now and have actually been able to install and run windows from it. Upon boot right after the "Energy" screen it says "Fast Trak "lite" Bios ver. 1.31 (Build 24) Scanning IDE Drives. and after that and hitting "Ctrl + F" as it says to do In the FastBuild it says there is no disk found and does not let me change anything withing since after hitting any key it reboots the system. If "Cltr + F" isn't hit it will eventually load into windows. Please help me, I'd like to know how to fix the problem of the Fastbuild not thinking there is a HD and slowing the booting process down that much.
View 5 Replies View RelatedWhen I try to run Disk Cleanup, the message comes up, "Disk Cleanup is calculating how much space." but the progress bar is frozen at about 10% and nothing happens.How do I unfreeze it so the utility will run?
View 2 Replies View RelatedWhen using the Disk Cleanup, if you never want to "Compress Old Files" (which is often annoying and takes a long time) follow this tip: Locate and then click the following registry key: HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionExplorerVolumeCachesCompress Old FilesOn the Edit menu, click Export, in case you change your mind.On the Edit menu again now click Delete. Thanks to Microsoft for this tip:http://support.microsoft.com/default.aspx?scid=kb;en-us;812930
View 9 Replies View Relatedi realised my pc cannot resume from a standby or hibernate. it shows a BSOD. some kernel inpage error. i surfed several forums about it.they say to run dskchk. but i cant use any of hard disk utilities. dskchk doesnt find my drives. i installed HD tune. it says no disks were found. i thought maybe somethin is wrong wid OS.. so tried a reinstall. but even it cant find my partitions. so i cant even format my pc now.. i can open & use my drives perfectly from my computer but problem is with disk utilities... Disk management doesnt show any of my partitins, it only shows my dvd drive. disk defragment shows them but cannot defrag. so i cannot defrag, scan for errors, format any of my drives. at one forum sum1 mentioned trojan remover can fix this... i installed it & started scan.. but it detects my system files as malicious & asks for action. but i aborted the scan cuz i'm afraid if it deletes or excludes sytem critical files i wont be able to boot & neither i can reinstall OS. so there is very much chance of data loss.
View 3 Replies View Relatedtyping msconfig in the run box will not start up the utility. msconfig.exe is located in windows/pchealth, and nt servicepak uninstall. The pf files are located in windowsprefetch. how can I get the utility to run, sort of reloading xp.I have sp2 as well as all of the updates.all the other utilities run ok.
View 5 Replies View RelatedA Handy utility for speeding up system performance in Windows XP (or any version of Win9x/me for that matter as well) is the System Configuration Utility. To access the system configuration utility, go to Start and click Run. Type msconfig and click ok. Click the tab labeled Startup. Uncheck any items for which you do not care if they load when Windows loads or you do not have any idea what they are. In Windows XP, no items that are listed here are essential to Windows running properly, so feel free to experiment. After you removed everything you don't need, click apply and then ok.
View 9 Replies View RelatedI have a Windows XP Pro system that became hosed during a failed attempt to apply SP2 and now is in a "Incomplete install rebooting" loop. Before attempting to recover, I would like to boot into a command prompt. hopefully from a bootable CD... and back up any critical files before messing around. (Security files, registry, etc.)Does anyone know of a utility for accomplsing this?
View 5 Replies View RelatedI used the backup utility that comes with XPPro/(i am running sp2) and used the wizard process.I chose the one that says you will be prompted to make a floppy once the back-up is done.The back up is done(i copied the whole of "C" drive onto another drive on my machine) but there was no prompt to make a floppy.I guess i have two questions..
1. what happened to the prompt, how do i get the wizarfd to work etc etc
2. to make my own floppy, what files should i put on it?
Download a System Diagnostic Utility For Windows XP Pro?
View 14 Replies View RelatedIs there a utility out there for low-level formatting SD disks? Or a utility that can delete and re-create partition on an SD disk. The disk is corrupted somewhat and Windows XP can't seem to format it.I don't need a picture recovery tool (i already have that).
View 7 Replies View RelatedJust wondering if it is possible to access/install the Backup Utility in XP Home Edition without the XP installation disc/s. The reason I ask is that my computer came pre-installed with xp home edition & no disc/s. I have read you need the xp installation disc/s to install the Backup Utility.
The D drive on the system has all the recovery files if things go wrong. I have made the recovery discs as per instructions. Can I access the Backup Utility form the D drive or recovery discs?