Unable To Boot Acronis For Cloning In Windows 8
Dec 30, 2013
- I just upgraded to Acronis 2014. Installation went fine. I have Windows 8 which is not letting me boot from the Acronis 2014 bootable media. Drive 1 (internal) is the source drive and Drive 2 (internal) is the target drive as per Acronis instructions. The Acronis Bootable Media is in the CD.
- It will never boot from the Bootable Acronis CD.
- Starting The Clone operation from inside windows 8 results in quickly needing to reboot and then nothing happens - nothing changes. If I reboot hard or soft it boots back into window 8.
- What specific instructions do I need to follow to get my new program to work in Windows 8?
- I do have a second computer that uses windows 7. Would the Acronis 2014 work on that computer if I wanted to have both the source and target drives in external USB devices? Other instructions I would need?
- Any other ways to clone a drive when I have windows 8?
- Any other ways to clone using the windows 7 computer as a foster parent?
I am trying to clone from a 2 TB drive to a 3 TB drive. Both are Seagate drives.
View 14 Replies
ADVERTISEMENT
Feb 17, 2014
I recently purchased an SSD to upgrade my Dell Inspiron 17R SE 7720 that runs Windows 8. This is the SSD I purchased and it came with cloning software: Amazon.com: Samsung Electronics 840 EVO-Series 250GB 2.5-Inch SATA III Single Unit Version Internal Solid State Drive MZ-7TE250BW: Computers & Accessories
I placed it in an external enclosure and cloned my HDD to the SSD using the program. After the cloning procedure the disk management looks like the figure below.
To me this looks good. But when I replace the internal HDD with the SSD it does not boot from the SSD at all. It takes me to the boot options and I don't see the SSD listed anywhere. I may just not be used to the Windows 8 setup.
View 9 Replies
View Related
Jan 15, 2014
i have a Lenovo Ideapad Z585 running Windows 8, secure boot, gpt paritioning and UEFI bios.The laptop comes with a factory shipped 1TB Sata drive which i want to replace with a Kingston V300 SDD 120GB drive.
I have followed this guide How to Migrate OS to new Hard disk.Ive run this in another desktop, it completes and i shut down, remove the destination and insert it into the laptop - power up and it blue screens with There has been an unexpected error message. Trying to access the recovery partition says it is damaged but looks like its almost going to load. Looking at the drive in EaseUS paritition master the paritions look a perfect copy apart from the proportional sizing.
AHCI is enabled in bios - i've tried EaseUS Backup clone, task was successfull but again blue screens but this time with a attached device cant be found.
One thing i wasnt sure about, the PC i done the cloning in has a RAID stripe setup but not sure if this effects it.Any one had success in cloning a GPT drive over to a SSD?
I cant do a fresh installation of windows 8 as i dont have recovery discs, nor does the onekey recovery software allow me to do so and id like to keep the recovery parition in tact really.
View 7 Replies
View Related
Jan 24, 2014
Quick question. I am trying to use Acronis disk imager. The second drive I am trying to use had been a primary drive, but it is not the current active partition. The "true" active drive is C...I am trying to reformat/delete everything off of that second drive so I can use Acronis and make the D drive my primary (since it's larger/faster) Disk management won't let me format D because it is showing active as well. I am not sure what to do here. It also wouldn't let me just delete the files manually. how to get around this?
View 1 Replies
View Related
Feb 17, 2013
I would like to reinstall Win 8 on my ASRock UEFI motherboard in the UEFI mode. I have Win 7 OEM and the downloaded Win 8 Pro upgrade. I have the Win 8 Pro upgrade burned to an ISO disc. I also have the hard drive backed up to Acronis 2013 and have an Acronis WinPE rescue disc to boot with to restore.
Several questions.
(1) If I convert to UEFI and format the drive to GPT, will Acronis restore to the GPT (from MBR)?
(2) If Acronis won't restore, will converting to UEFI/GPT affect installing or activating the Win 7 OEM and/or the Win 8 Pro upgrade (I assume I'll have to install Win 7 and then upgrade to Win 8).
(3) Will a UEFI system read other hard drives that are MBR formatted?
View 9 Replies
View Related
Jan 25, 2013
I am running windows 8 pro in a Intel i5 3470 + Gigabyte B75M-D3H system with UEFI bios .
I have two drives OS drive is a SSD & a 1 tb HDD with two partitions.
I am removing the SSD & want to transfer OS to one of the partitions on the HDD , the issue is boot files on the small 350mb system reserved partition on the OS drive , not sure how to transfer this partition or if this partion in on the SSD or the HDD.
This what my drives look like , C: is SSD :
Before i installed the SSD , I was running win 7 from the HDD installed in the 170 gb partition , to install the SSD i had to remove the HDD then do a fresh install of win 8 on the SSD & connected the HDD back later ,
The 170gb HDD partition is still untouched & has the old OS files , I want to transfer the SSD partition back to this 170gb partition i.e drive F: in the above pic . I am not sure how to transfer it & what to do with the system reserved partition .
View 3 Replies
View Related
Aug 4, 2013
i want to resize my partitions and yesterday i use acronis disk director boot cd and saw a learning clip but when boot from cd , the acronis shows my partitions but said "unsuppoerted" and i could not resize them(all of the options were disabled) why?
View 4 Replies
View Related
Oct 4, 2013
A couple of weeks ago, I cloned my HDD C drive to a new 250GB Samsung 840 EVO SSD.
After fitting the SSD in place of the old HDD, the system rebooted fine and worked well with a very noticeable increase in the speed at which Windows loaded.
However, Samsung's "Magician" software informed me that the drive was running in SATA mode and that better performance would be obtained by switching the Storage Configuration parameter to AHCI mode in the BIOS on my ASUS P7P55D Pro motherboard.
So, I tried this but Windows would not load. I didn't get a BSOD as such... I'd get the Windows 8 start-up logo with the spinning dots below for a while, then the screen would go blank, then a message would flash briefly on the screen saying something along the lines of "Windows has experienced a problem and was unable to start so your computer is being restarted" (not exact words as it's not on screen long enough for me to read) and my computer reboots. This startup/error/reboot loop is repeated until I enter the BIOS and switch Storage Configuration back to IDE whereupon all is back to normal.
Further research then revealed that I needed to tweak the registry so I did this but I still get the startup/error/reboot loop.
Next I tried booting into SAFE mode as described in this thread. It'll boot fine if I leave Storage Configuration set to IDE but not if I change it to AHCI. It just goes back to the same old startup/error/reboot loop and Windows makes no attempt to install any new drivers.
I know I could do a clean install of Windows but I don't really want to go down that route if I can possibly avoid it.
I strongly suspect that the motherboard's Intel(R) 5 Series/3400 Series SATA AHCI/RAID Controller does not have the right driver installed that would enable AHCI mode to work. Is there a way that I can force installation of an updated driver? Is there such a thing (device manager tells me the latest driver is installed)?
I can live with IDE mode as the computer boots considerably faster from the SSD and programs load much quicker too but not being able to use AHCI mode is bugging
View 9 Replies
View Related
Jan 9, 2014
have Acronis 2013 Plus. What I am trying to do is image the disk of a Windows 7 machine (source) to a machine that had Windows 8 pre-installed (target - Gateway SX2110G).
I connected the Windows 7 drive to the new machine (USB data cable), disabled Secure Boot, and enabled Legacy. Booted to True Image and started the cloning of the drive. Everything seemed to go ok, but as soon as it starts to boot Windows 7, it gives a 7D BSOD. (the same BSOD it gives when I simply plug the source hard drive into the target and try to boot from it).
The source HDD (win 7) boots fine in its original machine.
*I tried the startup repair that's included with the image.. does it matter if I use the one from a disc instead?
View 7 Replies
View Related
Sep 15, 2014
I have been running my desktop system under WIndows 8.1 since release, and I started having a problem the other day.
The system seems to have hung up completely, so I powered it down (it is usually up 24 x 7 since I use it as a DVR along with my computer usage).
It seemed to be ok when it powered up, but then a bit later it asked to reboot to finish installing updates.
It has not booted since.
During reboot, it displays the Windows logo and the spinning dots for a few seconds, and then the screen blanks, and my monitor loses signal. I have left it for quite a while and it doesn't come back. After some time, it goes into sleep mode (slowly flashing power indicator), so something is going on at some level. I have powered off and back on, and removed the power cord for a minute to see if anything different happened... it doesn't.
I have tried pressing F8 and Shift-F8 during reboots to try to get to safe mode, but so far no good. Last night, I used my laptop and seem to be able to access shares, but unfortunately it appears that the things I want/need most are not shared.
The bad part is that I haven't been able to locate my recovery disc, but I will continue to look.
I bought the system with Windows 7 right before 8.0 was released, and When 8.0 came out, I got the cheap upgrade and before loading it, installed an SSD for my C: Drive, and kept the existing HDD for my D: Everything has been running well until this incident.
View 1 Replies
View Related
Aug 17, 2013
I was writing an email and randomly my fairly new and perfectly working laptop kept freezing and showing Disk 100% in Task Manager so I restarted. After that my laptop is stuck on "automatic repair mode" whenever I power on and none of the options work. I have the options to "Continue to win 8" "use a device" "troubleshoot" or "turn off my pc" NONE of these options are working! If I click anything it just freezes.
How can I recover some important files I had on my desktop? I didn't have any partitions! I'm not able to boot with Ubuntu, win 7, or norton ghost DVDs. I even set the DVD drive to boot first in BIOS.
It's a toshiba satellite s855d-s5148
AMD A10
ram 8gb
HDD 1 tb
View 9 Replies
View Related
Jul 3, 2013
I am trying to run sfc /scannow to try and fix my boot problem but I keep getting "windows resource protection could not start the repair service"
I have found a few threads that mention this but they go off on a tangent and do not deal with what I am facing.
I have the original Windows 8 CD but it has never managed to fix a thing for me, it just says it cannot! I really cannot to a clean install as all of my work files are on there!
View 9 Replies
View Related
Sep 15, 2014
Asus Zenbook UX51VZ / Windows 8 OEMUpgraded to Win 8.1 around three weeks agoFaced no problems (surfing, media programs, games worked fine)Last Friday during startup I received an error message telling me that something isn't correct and that windows will try to find the problemGot “directed” to the following menu Refreshing doesn't work as my hard drive seems to be blockedCan't select any restorable system images (as there aren’t any)I really don't want to format my hard drive! Tried to safe my data by looking everything up, managed to gain access to my second partition on which I had only media files. Still, I urgently need to get the files on my C: drive back.
How I recovered my data on D: :
Ubuntu Live CDBoot Ubuntu instead of windows (which can’t be booted anyways)Nautilus, selected D:/ (called DATA)Received following error message: "Error mounting /dev/dm-6 at /media/ubuntu/DATA: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=999,gid=999,dmas k=0077,fmask=0177" "/dev/dm-6"
[Code]....
View 9 Replies
View Related
Sep 15, 2014
Recently I was trying to upgrade my Windows 8 Pro computer to Windows 8.1 Pro. But I had no working USB sticks so I thought I could make a NTFS partition into my hard drive and extract the Windows 8.1 Pro installation setup files on there. So when I restarted my computer, it booted up into the Windows 8.1 Pro installing setup but said that I needed to boot up into Windows and put the installation media back in. But I could not and just kept booting into the installation.
So I thought that if I delete the partition I could go back to Windows. So I did with DISK PART. Now when I restarted it, it now gives me "DISK BOOT FAILURE, INSERT SYSTEM DISK AND PRESS ENTER". I'm guessing that when I deleted that partition, there is unallocated space left and my computer is trying to read off that but not the Windows partition.
I have a Compaq computer ...
View 2 Replies
View Related
May 12, 2014
I have problem about booting from usb. I will add a short video about what is going on when I am trying to boot from usb but first let me show you picture of my system information.
I have tried 2 different usb to boot and one of them is shown in boot page but not opened the other one act like it does not exist. First usb worked on 2 different computer. Second one haven't tried on an other computer. I am using Universal USB Installer which is recommended by Ubuntu to creat bootable USB.
NOT 1: I wrote "Ubuntu" bu I think problem is not realated with what kind of bootable OS has it in.
View 8 Replies
View Related
Jan 17, 2014
I'm evaluating a windows 8 gateway. it is unable to boot. automatic repair doesn't work, no go on refresh, there is no media for re-install. no restore points. just to see, I am checking out what diskpart says. disk 0 online, size-0, free-o bytes. the pc had been dropped. I reseated the hard drive to rule that out. is this drive dead? disk 1 is 14gb, but I'm thinking that the 16 gb flash drive that is plugged into it.
View 2 Replies
View Related
Jul 24, 2014
Yesterday, after many, many problems with my computer, I finally decided to reinstall Windows 8.1 Pro onto my ASUS X200CA netbook. However, after backing up and reinstalling the OS, I found that when I tried to disable "Launch CSM" in my BIOS, all of my boot options would disappear and my laptop would continually boot into my BIOS. When I re-enabled "Launch CSM", the boot options would reappear - however, it had not included the "Option #1 - Windows Boot Manager" that I had seen in my other installation.
View 2 Replies
View Related
Nov 22, 2013
How to boot either from extrnal drive or from bootable CDR.
On my previous system this was quite straightforward, in BIOS I could specify boot media lookup order buthere I'm quite clueless, although here's still media type order table but no more hard drives lookup order so Windows 8 bootloader persistently ignores my grub4dos bootable partition on external drive, which was with Windows 7 system perfectly booting.
It looks like on new system external hard drives are ranked under "USB" devices unlike on old system where it ranked under hard drives. So despite I put USB drives here a highest booting priority and despite that BIOS correctly identifies my connected xternal drive, it for some reason either won't boot or is ignored. Any resolution or setup guide for this. Btw. EasyBCD won't work at all (maybe because I selected this external drive as default booting disc for a while and now is inaccessible from Windows UI).
View 9 Replies
View Related
Oct 19, 2013
I am unable to move my boot data to another partition. Please have a look at the following picture-:
As you can see I have created a separate a partition before my C drive and formatted it.
I have used the following command to copy the boot data from my C drive to the System partition(S:)
bcdboot C:Windows /s S: /f BIOS
But as you can see C drive is still marked as "System" which means my PC isn't actually booting from drive S:.
How do I force my system to boot from drive S: and not drive C: ???
View 1 Replies
View Related
Aug 11, 2013
I had some problems with Ubuntu, and wanted to recover my Windows 8 MBR, so that I can boot back into it, and not a corrupted version of Grub2. Anyway, I burned an iso for the Windows 8 recovery disk, and the disk is fine since it works on another computer. However, it doesn't work on the computer I want to use it on. The recovery disk says
Code: Loading files...
And completes a loading process. Then, blue squares go along the top of the screen. However, it suddenly turns off my computer in the middle of the process. I've tried this multiple times with the same result.
View 2 Replies
View Related
Nov 3, 2013
How to make usb bootable. I have done the following:
- Used "Rufus" as per tutorial to make UEFI Bootable USB Flash Drive
- used a software to test usb if bootable and it was.
- Set Secure Boot off
- Adjusted BIOS to boot usb (kingston) as primary.
I try restarting and nothing happens.
View 9 Replies
View Related
Jan 11, 2013
I have installed windows 8 on a windows 7 PC on a separate hard disk. But I am unable to get boot option at startup. Every time I have to select windows 8 boot disk from bios boot menu.
View 3 Replies
View Related
Apr 13, 2014
I got into BIOS and found a menu I've never seen before.
Add boot option.
Path to boot option.
Create.
The add boot option doesn't accept letters or numbers. Any input is 'out of range'.
Asus model X551M, has a 500 gig hard drive.
So, how do I get this to work ?
View 5 Replies
View Related
Nov 13, 2012
My Acer Extensa 5620Z originally came with Vista, then I clean installed Win 7, now upgraded to Win 8. Since the latest upgrade, I am unable to access BIOS or the boot menu. The black and white boot screen used to say to press F12 for boot menu, and something else for Setup, those messages are no longer there. And those key combinations do not work. I've also tried some other combinations I've found in searches - F2, Alt-F10, ctrl F10, alt ctrl F10, F8, del, esc. None work.
Could the upgrade has modified the firmware somehow? Boot screen says Phoenix bios, TrustedCore v1.32 - I think that is the same it has been.
View 5 Replies
View Related
Feb 10, 2013
I was having problems getting to the boot menu of my Lenovo G580 laptop earlier.
I figured out how to get the boot menu - But my only options are hard drive, LAN v4 and LAN v6 boot - Nothing about a disc. So I went into the BIOS boot priority menu and set disk to #1 - It still booted to my hard drive!
View 5 Replies
View Related
Oct 20, 2013
I have a Dell Inspiron 7720 Win 8 x64 PC which includes UEFI (described in Microsoft link below). However, UEFI is accessed on Win 8 from Settings Charm > "Change PC Settings". This requires that you have booted the system already. In case of a main disk crash, you need to boot from another drive, like a thumb drive.
During restart my Dell PC displays "F12 Boot Options" in lower right of screen during restart, but multiple presses of F12 during startup are ignored. Likewise when I try F1 or F2 during startup. So I have no way to specify an alternate boot drive.
I am thinking maybe my PC is defective, but also maybe I'm missing something. What is UEFI? - Microsoft Windows Support
View 3 Replies
View Related
Mar 6, 2014
I actually installed the Android on Intel Architecture onto my Samsung xe700t a few times over the last few months, adjusting windows 8 or android options to suit my needs, but a few days ago I decided to format my laptop and reinstall Windows 8 and reinstall Android as I have previously, I am now getting this error message at the very end of the android installation process:
fatal: assertion failed bootable/iago/plugins/gummiboot.c:gummiboot_execute:154 'efibootmgr encountered an error (status 100) root@android:/#
I have updated the bios, I have made sure my laptop is in UEFI format, I have made secure the BIOS isn't in secure boot, I have tried various USB sticks, I have also made sure the USB stick is first in the boot order.
So why I can't install Intel Android onto my pc anymore ...
View 8 Replies
View Related
Dec 15, 2013
I just got a refurbished ASUS K75DE laptop, and it came with Windows 8 on it. I am wanting to run a dual boot with Win7, so I disabled fast-boot just fine, and went into the UEFI BIOS and disabled the secure boot.
While I was there, I did like I have always done and set a BIOS boot-up password. I then proceed to boot to my Win7 installer USB Flash drive, but I was running low on battery power so I aborted the install and shut the computer down to try again later.
Now however when I get into BIOS to select boot priority, all options are grayed out except for system time and a few other non-essentials. At the bottom of the first BIOS screen it says "User Level : User" and I can't seem to find a way to reverse this issue. So now I'm stuck, can't boot to anything but the HDD because it is first by default.
View 9 Replies
View Related
Mar 24, 2014
After creating a UEFI bootable USB thumb drive with Rufus (using Windows 8.1 Enterprise ISO x64), for a Dell Optiplex 3010 (configured as UEFI only, no CSM, latest firmware version, Windows 8 installed), I didn't see a USB boot option, so I tried to add one manually. Unfortunately I erased the existing boot option (boot manager) by mistake. Although there were two boot options for PXE booting, the machine will not start anymore, even when there is an active WDS server on the network.
I also see Led's 2 and 3 lighting up, meaning according to the manual 'hardware ok but bios possibly damaged/corrupt'.
I understand I cannot start the machine from a bios boot disk because of GPT partitioning, and the UEFI USB boot disk I made might be corrupt (as it didn't show up as a boot option), however I don't understand why it won't boot from the PXE network card, as these boot options are still there.
View 4 Replies
View Related
Mar 8, 2014
Client computer that shows black screen with text at boot up. Cannot boot into Windows 8 (8.1?)
This is what is on the black screen;
Your PC needs to restat.
Please hold down your power button.
Error Code 0x0000012a
Parameters:
0x0000000000000001
0x0000000000000046
0x0000000000000000
0x0000000000000000
After re-boot a message shows
Prepairing Auto Repair
Diagnosing PC
PC Did Not Start correctly either with 2 options - Restart and trying any of the Advanced Options
Restart option did nothing but restart this cycle of BSOD, etc. Advanced options to troubleshoot (Refresh, Reset, System Repair, Command Prompt are not available due to the following message:" You need to sign in as an administrator to continue, but there aren't any administrator accounts on this PC"
No system recovery disks or Windows 8 Installation media available.
PS :Cannot boot into Windows 8
View 3 Replies
View Related
Aug 22, 2014
Windows 8.1 failing to boot when any usb storage drive is plugged in during boot. My only solution is to unplug everything each boot unless I use my KVM switch which does not support usb 3.0.
View 2 Replies
View Related
