What I would like is to create an Answer File, example:
Customer Name: Owner
Account: Local Account (No sign in)
Can this be automated, like connecting new computers to a network and reading from one Answer File.
Just reinstalled Windows 8.1 and can't figure out what the deal is. I have a four monitor setup, and all of this worked perfectly before I reinstalled. I actually remember dealing with this issue before, but I couldn't remember how I fixed it.
Basically, with two monitors, everything works perfectly. The minute I connect my third monitor, it's like all the screen flicker, and then I get logged out and back to the start screen.
I've tried updating nvidia drivers but it doesn't work.
I have a Lenovo G580 laptop 2gb RAM, i5, and 500gb HDD. It had windows 8 RTM 32 bit installed on its C drive. It had come with DOS preinstalled so I had to do a fresh install of windows 8 via bootable usb. It worked well for few months but now it refuses to boot and goes into "automatic recovery mode" and then it says that your pc needs to be repaired with a recovery disc.
I did not made any recovery disc when it was working so I tried to do a fresh install of win 8 and then win 7 via bootable usb, but both have failed. The screen freezes after blue logo of windows appears and then it restarts saying it has encountered an error and needs to be restarted.
I have tried booting it in safe mode along with all other options on start-up menu but it doesn't work.
Any way to stop the 8.1 upgrader from automatically installing (graphics) drivers as it sets up? I have an Acer AS4820TG with switchable Intel HD and Mobility Radeon HD 5650 graphics, and I'm 99% sure that drivers for one of these are causing a problem with installing 8.1 Pro. The screen turns black after the second restart, when Windows is "Getting devices ready". After this point it stays black.. no input of any sort affects it. I tried waiting it out for a while, and eventually I just did a hard shut down, at which point Windows reverted to 8. I'm hoping that if I can get it to install without the drivers, I can manually install them from the desktop.
View 4 Replies View Relatedin my previous mentioned as c as partition active and then made its as inactive
after that i am getting error code 0x000000f when troubleshooting the systems. how to fix that problem without re installing the windows again.
My PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows. When i try to refresh or reset alway get msg " there is a problem resetting your pc, no changes are made" My PC is preinstalled so no I don't have recovery CD/DVD Here pics
View 9 Replies View RelatedYou have Windows 8 or Windows 8 Pro installed on your PC. Your PC fails to boot into Windows and launches Automatic Repair to attempt to repair Windows.
Automatic Repair is unable to repair your PC and you select "Advanced options". After selecting "Troubleshoot", you choose to either "Refresh your PC" or "Reset your PC".
In this scenario, recovery may fail and you are returned back to the main WinRE screen. This issue may occur if the System or Software registry hives have become damaged or corrupted.
To attempt to resolve this issue, follow the steps below. Following these steps should only be used if you are attempting to use the "Refresh your PC" or "Reset your PC" options in Windows RE because your system is in a non-bootable state.
-After Automatic Repair fails to repair your PC, select "Advanced options" and then "Troubleshoot".
-Select "Advanced options" and then select "Command Prompt".
-If prompted, enter in the password for the user name.
-At the Command Prompt, go to the windowssystem32config folder by typing the following command: cd %windir%system32config.
-Rename the System and Software registry hives to System.001 and Software.001 by using the following commands:
ren system system.001
ren software software.001
I did all that but when I tried to rename the Software.001 file the system responds: "The process cannot access the file because it is being used by another process" ...
I tried to create a Ubuntu start up usb key so that i could maybe get in and rename the file but that presented more problems.
I've been looking at some of the MATROX graphic cards for multi-monitor output -- up to 8 possible !!
Now any decent software to run these -- the standard software seems OK at running TWO monitors but I want to be able to run several more. You can run more but it gets a bit complicated managing this from within the standard windows system itself.
Five Best Tools for Managing Your Multi-Monitor Setup
After sorting out my problem installing multiple Hard Drives and getting past that I am now faced with another problem, which is that no screen is displayed on start-up to allow selecting other drives to boot from.
I can select other drives to boot from if I boot up into the default drive and select "Change PC Settings" but that is very slow and allows mistakes if one is tired.
I think the reason for the problem is because I installed all the drives on their own separately (took out the other drives) and they are now all installed properly except for this problem.
I only need to boot from the default drive when I need to do something with that particular drive or to boot from "Windows 7 Ultimate" I tried to fix the problem with Drive Freshen (I think its called) but that didn't work.
Is there a way to fix this problem and have the screen that offers to allow booting from another drive added to the default drive, without doing a total re-install?
On a multi boot system it is the first screen to display before booting the OS, and shows all the installed Drives in boxes with their names (labels) on, so that you can choose which Drive to boot from..
I built a computer recently. Since day one I get BSODs but the drivers, and Bug/Checks listed are never the same.I was thinking it couldn't be a single device or driver so I've:
Replaced the MOBO.
Repair Installed the OS.
Replaced the RAM.
It BSOD'd multiple times between each change.
The only things I've run are IE/FF and Ableton Live 9. Ableton is usually running during the BSOD but it was not the last time.
I have an ASUS mother board and don't use an graphics card.
I had two monitors and an HDMI cable plugged in. The short story is that the Intel drivers seem to get lost.
Windows installed normally until it went into to the final setup.
The program will switch to another screen at this point and picked a monitor and the HDMI to TV connection.
Unplugging the HDMI cable allowed me to finish.
I upgraded to windows 8.1 when it was available and the first time I turned off my computer after upgrading, it all started and now I'm stuck in this automatic repair loop. To top it all off my mobo: Gigabyte GA-Z68MA-D2H-B3... has now become my main issue.
I have a bootable flash drive loaded with windows 8.1 and a bootable DVD loaded with windows 8.1 but my mobo supports only HDD and CD-rom...
I have no clue what to do, as I can't use a repair disc to repair my computer and I CANNOT Reset my PC, I have way to many files that I need on my HDD.
I have an acer E1-531-4694 laptop and it will no longer start up, when I press power, it goes to acer's startup screen :
"acer explore beyond limits"
"your pc ran into a problem and need to restart. we're just collecting some error info, and than we'll restart for you ( 0%)"
"Preparing Automatic Repair.."
Than the screen just turns black.. It will just restart the same thing. I tried booting into safe mode but nothing happens.
Does Windows 8 Automatic Backup backup my email as well as other files?
View 1 Replies View Relatedsolution to make automatic log on on windows startup.
(like local account just as Microsoft account)
So I took the tutorial Log On User Account Automatically at Windows 8 Startup .
And after doing the steps, I'm having the setting set up for using automatic log on.
After re-log to windows it still asks me for a password...
So how i make it work to automatic log in without asking the password?
I was using Windows 8. My internet is "Radio" using a Bullet which is connected to my PC. So, I create a new Broadband connection (PPPOE) unde Windows. After creating it, I put the "service" and manually connected to the internet. But after restarting, and loggong into my account it shows me a windows where I had to put login and password, and I also marked "automatic connection when login, and worked fine.
After installing Windows 8.1 Preview it seems that it was removed. Because after creating a new connection and restarting my computer, there isn't any window anymore to create my automatic connection. I can connect only manually clicking on the Icon on tray.
I thought that this option of windows 8 would be back on final release, but it wasn't. How can I can configure my computer to connect automatically after login to my account, because I don't like to connect all the times manually.
It's only been two days since I got windows 8 Pro on my alienware. Recently I force shut down because it was not shutting down. And when I open it today it gives an error message saying that Automatic repair could not fix the problem.
The error code is: "D:WINDOWSSystem32LogfilesSrtSrtTrail.txt
I have tried everything. I have used command prompt and the following commands have also been tried.
bootrec/fixMMR
bootrec/fixboot
bootrec/rebuildbcd
chkdsk/r c:
chkdsk/r d:
Nothing has worked so far. I have tried everything except a fresh installation of windows. I have already taken a backup previously. I am a little apprehensive about formatting again.
I have an HP laptop that came with Windows 8 installed. One of the automatic updates ran and changed pathways to my files. If I click on Libraries, my documents, music, and pics that were there before the upgrade are not there now. I have to click c:/users/myusername/ then whichever folder I'm looking for. Is there a way to get that back so all my files go to one set of library folders instead of having a new set?
The update almost crashed the whole laptop. Also corrupted my save points and had to do a new restore point once the system was finally brought back up. I'm tracking down how to fix my app store tile now. The update also deleted all my tiles I had on my start screen.
Ive recently found out that im not admin of my own computer, i cant even access some of my very own files and cant change important settings such as windows automatic update and download some files, ive tried everything for example hidden admin and much more, i also cant even PRESS A BUTTON TO MAKE A NEW USER BECAUSE YOU NEED ADMIN RIGHTS FOR THAT!! this is so tiring and to make matters worse im running windows 8 and when i press"settings", "change pc settings" nothing happens, i believe this is due to me being nothing of high authority to my own computer. P.S Dont suggest anything like "Enable UAC" or create another user because when i click on it nothing happens.
View 1 Replies View RelatedI have a Windows 7 / Windows 8 dual boot setup that was initially working fine. When attempting to update the graphics drivers in Windows 8 last week, something went wrong and the system crashed. Now when I attempt to boot into Windows 8, it goes into the Attempting Automated Repairs loop which never finishes, even when left running for several hours. I attempted to boot off of the Windows 8 installation CD and do a Refresh but it just errors out saying Windows could not be refreshed.
View 4 Replies View RelatedSince upgrading to windows 8/8.1 x64 i have twice had this situation when during boot up windows tries automatic repair & fails , every time i restart same repair fail happens , its stuck in this cycle , neither "Refresh" or "Reset" option works , . I have to do a fresh format & install , loose all my files stored in the OS partition , I even tried to recover the files using linux boot cd but the folders were inaccessible/corrupted .
I tried every solution i could find to make it boot including Unable to refresh or reset PC after Automatic Repair fails in Windows 8 but nothing worked .
This has happened twice in the one year since i have been using Win 8 , Is there any way to avoid this from happening i future ?
I have just bought a new laptop which came with Windows 8 preinstalled. I have since updated to 8.1 Pro with Media Center and so far, touch wood, things appear to be running well.
Having used Windows 7 for ages, I found the change to 8 somewhat difficult but I am slowly figuring it out. There will undoubtedly be things I cannot sort for myself but straight off the bat I have one question:
Where can I change a setting to stop in 8.1 from automatically going on line and downloading stuff I don't want? I do not want to prevent automatic downloading of Windows Updates etc, but I have just turned on and been greeted with a message telling me that Windows has downloaded 9 new apps - Alarms, Calculator, Food & Drink, Health & Fitness, Tips, Reading List, Scan, Sound Recorder, Bing Desktop, and MS Silverlight (yes, I know, this is 10!)
I particularly want to keep this new Laptop free of unnecessary software which I will never use, basically all I want is Word, Excel, email capability, the ability to view TV (when away from home, hence the upgrade to 'Pro with Media Center') but little else. I will soon be abandoning my home cable internet connection and will be relying on a much reduced plan and so will not want the limited data used up because the O/S automatically loads the computer with rubbish.
I tryied to get into Safe Mode in Windows 8.1 x64 and got looped by Automatic Repair loop
I tryied everything but without sucsess.
Safe Mode didnt come up, and it stays on Automatic Repair loop -> Diagnostics every restart/boot, and c'ant get into windows.
How do i disable this?
Acer Aspire V5 is the PC I am using. I turn it on, the boot fails and the pc restarts. Then begins an automatic repair, which crashes and the PC turns off. It is a loop I cannot get out of. I don't have a Windows 8 Disc or anything like that.
View 2 Replies View RelatedI have a Lenovo Z585 and it seems to be stuck in the early stage of boot up. When powered up the Cap sensor buttons flash every second and the caps lock indicator flashes every other second. The problems seemed to occur after windows 8.1 automatic update. I have tried battery and power lead out, pressing power power on for 30 sec but it did not work.
View 1 Replies View RelatedAny way to disable SuperFetch permanently it re-enables almost every day not sure if something else like tune up enables it i know its used to collect information about started programs so the next time they can start faster but I don't really see any difference with or without it so I don't really like it and it actually makes my disk usage go to 100%.
View 3 Replies View RelatedWindows 8.1 tutorial for using Task Scheduler to configure an Automatic Shutdown after a user defined amount of idle time. I can't seem to find one...or is it not possible...or is there another way to skin this cat.
View 6 Replies View RelatedI have Windows 8.1 Pro 64bit and I have 2 LOCAL accounts - First is 'my' account which is administrator and pw protected Second 'Guest' account which dosent have any pw
Most commonly any member of my family goes in my computer under Guest account and here goes the fun..
For example I go to sleep i log out or shut down my pc.. member of my family turns on and in account login automaticly goes to my pw protected account, he/she has to press the little back arrow to show all the users and go inside Guest account. Now he/she has done work he/she shuts down the pc. In the next morning I power on my pc AND HE AUTOMATICLY logs in/goes into guest account, so i have to wait those valuable 5-10 seconds as he loads in(and yes this IS annoying if it happenes once or twice a day), then I need to press sign out and then I can press to my admin account write pw and login into my acc! So basicly he rememberes last user and automaticly logs in, if the user dosent have pw then he proceeds in signing in if it has pw then it stops to a pw..
How to change this? I want when i power on, he goes into account login screen(where he show all the accounts) and when I press the acc I want - as it always has been!
P.S. Log On User Account Automatically at Windows 8 Startup from this turtarial I have check'ed the box from option one step 3, but guest acc dosent have any pw so its useless....
"Is there is any way of Automatically hide the taskbar OR go to fullscreen mode AFTER (i.e. 1,2,3,....n sec) user has MAXIMIZE the explorer?"
View 1 Replies View RelatedUsing Windows 8.1. If I have a notepad, say Untitled 1, already open in Windows, then how can I open a fresh Notepad?
Every time I am clicking on Notepad.exe, the same Untitled option is opening.
If you are running windows 7 now, with multiple desktop gadgets, will those gadgets still be compatible with windows 8 after an upgrade?
View 5 Replies View Related